Export limit exceeded: 417349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417349 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38140 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm: limit swapping tables for devices with zone write plugs dm_revalidate_zones() only allowed new or previously unzoned devices to call blk_revalidate_disk_zones(). If the device was already zoned, disk->nr_zones would always equal md->nr_zones, so dm_revalidate_zones() returned without doing any work. This would make the zoned settings for the device not match the new table. If the device had zone write plug resources, it could run into errors like bdev_zone_is_seq() reading invalid memory because disk->conv_zones_bitmap was the wrong size. If the device doesn't have any zone write plug resources, calling blk_revalidate_disk_zones() will always correctly update device. If blk_revalidate_disk_zones() fails, it can still overwrite or clear the current disk->nr_zones value. In this case, DM must restore the previous value of disk->nr_zones, so that the zoned settings will continue to match the previous value that it fell back to. If the device already has zone write plug resources, blk_revalidate_disk_zones() will not correctly update them, if it is called for arbitrary zoned device changes. Since there is not much need for this ability, the easiest solution is to disallow any table reloads that change the zoned settings, for devices that already have zone plug resources. Specifically, if a device already has zone plug resources allocated, it can only switch to another zoned table that also emulates zone append. Also, it cannot change the device size or the zone size. A device can switch to an error target. | ||||
| CVE-2025-38137 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: Cancel outstanding rescan work when unregistering It's possible to trigger use-after-free here by: (a) forcing rescan_work_func() to take a long time and (b) utilizing a pwrctrl driver that may be unloaded for some reason Cancel outstanding work to ensure it is finished before we allow our data structures to be cleaned up. [bhelgaas: tidy commit log] | ||||
| CVE-2025-38060 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: copy_verifier_state() should copy 'loop_entry' field The bpf_verifier_state.loop_entry state should be copied by copy_verifier_state(). Otherwise, .loop_entry values from unrelated states would poison env->cur_state. Additionally, env->stack should not contain any states with .loop_entry != NULL. The states in env->stack are yet to be verified, while .loop_entry is set for states that reached an equivalent state. This means that env->cur_state->loop_entry should always be NULL after pop_stack(). See the selftest in the next commit for an example of the program that is not safe yet is accepted by verifier w/o this fix. This change has some verification performance impact for selftests: File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ---------------------------------- ---------------------------- --------- --------- -------------- ---------- ---------- ------------- arena_htab.bpf.o arena_htab_llvm 717 426 -291 (-40.59%) 57 37 -20 (-35.09%) arena_htab_asm.bpf.o arena_htab_asm 597 445 -152 (-25.46%) 47 37 -10 (-21.28%) arena_list.bpf.o arena_list_del 309 279 -30 (-9.71%) 23 14 -9 (-39.13%) iters.bpf.o iter_subprog_check_stacksafe 155 141 -14 (-9.03%) 15 14 -1 (-6.67%) iters.bpf.o iter_subprog_iters 1094 1003 -91 (-8.32%) 88 83 -5 (-5.68%) iters.bpf.o loop_state_deps2 479 725 +246 (+51.36%) 46 63 +17 (+36.96%) kmem_cache_iter.bpf.o open_coded_iter 63 59 -4 (-6.35%) 7 6 -1 (-14.29%) verifier_bits_iter.bpf.o max_words 92 84 -8 (-8.70%) 8 7 -1 (-12.50%) verifier_iterating_callbacks.bpf.o cond_break2 113 107 -6 (-5.31%) 12 12 +0 (+0.00%) And significant negative impact for sched_ext: File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ----------------- ---------------------- --------- --------- -------------------- ---------- ---------- ------------------ bpf.bpf.o lavd_init 7039 14723 +7684 (+109.16%) 490 1139 +649 (+132.45%) bpf.bpf.o layered_dispatch 11485 10548 -937 (-8.16%) 848 762 -86 (-10.14%) bpf.bpf.o layered_dump 7422 1000001 +992579 (+13373.47%) 681 31178 +30497 (+4478.27%) bpf.bpf.o layered_enqueue 16854 71127 +54273 (+322.02%) 1611 6450 +4839 (+300.37%) bpf.bpf.o p2dq_dispatch 665 791 +126 (+18.95%) 68 78 +10 (+14.71%) bpf.bpf.o p2dq_init 2343 2980 +637 (+27.19%) 201 237 +36 (+17.91%) bpf.bpf.o refresh_layer_cpumasks 16487 674760 +658273 (+3992.68%) 1770 65370 +63600 (+3593.22%) bpf.bpf.o rusty_select_cpu 1937 40872 +38935 (+2010.07%) 177 3210 +3033 (+1713.56%) scx_central.bpf.o central_dispatch 636 2687 +2051 (+322.48%) 63 227 +164 (+260.32%) scx_nest.bpf.o nest_init 636 815 +179 (+28.14%) 60 73 +13 (+21.67%) scx_qmap.bpf.o qmap_dispatch ---truncated--- | ||||
| CVE-2025-37906 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but we may have scheduled task work via io_uring_cmd_complete_in_task() for dispatching request, then kernel crash can be triggered. Fix it by not trying to canceling the command if ublk block request is started. | ||||
| CVE-2025-37870 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: prevent hang on link training fail [Why] When link training fails, the phy clock will be disabled. However, in enable_streams, it is assumed that link training succeeded and the mux selects the phy clock, causing a hang when a register write is made. [How] When enable_stream is hit, check if link training failed. If it did, fall back to the ref clock to avoid a hang and keep the system in a recoverable state. | ||||
| CVE-2025-37759 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ublk: fix handling recovery & reissue in ublk_abort_queue() Commit 8284066946e6 ("ublk: grab request reference when the request is handled by userspace") doesn't grab request reference in case of recovery reissue. Then the request can be requeued & re-dispatch & failed when canceling uring command. If it is one zc request, the request can be freed before io_uring returns the zc buffer back, then cause kernel panic: [ 126.773061] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 126.773657] #PF: supervisor read access in kernel mode [ 126.774052] #PF: error_code(0x0000) - not-present page [ 126.774455] PGD 0 P4D 0 [ 126.774698] Oops: Oops: 0000 [#1] SMP NOPTI [ 126.775034] CPU: 13 UID: 0 PID: 1612 Comm: kworker/u64:55 Not tainted 6.14.0_blk+ #182 PREEMPT(full) [ 126.775676] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 [ 126.776275] Workqueue: iou_exit io_ring_exit_work [ 126.776651] RIP: 0010:ublk_io_release+0x14/0x130 [ublk_drv] Fixes it by always grabbing request reference for aborting the request. | ||||
| CVE-2025-37746 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/dwc_pcie: fix duplicate pci_dev devices During platform_device_register, wrongly using struct device pci_dev as platform_data caused a kmemdup copy of pci_dev. Worse still, accessing the duplicated device leads to list corruption as its mutex content (e.g., list, magic) remains the same as the original. | ||||
| CVE-2025-37743 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid memory leak while enabling statistics Driver uses monitor destination rings for extended statistics mode and standalone monitor mode. In extended statistics mode, TLVs are parsed from the buffer received from the monitor destination ring and assigned to the ppdu_info structure to update per-packet statistics. In standalone monitor mode, along with per-packet statistics, the packet data (payload) is captured, and the driver updates per MSDU to mac80211. When the AP interface is enabled, only extended statistics mode is activated. As part of enabling monitor rings for collecting statistics, the driver subscribes to HAL_RX_MPDU_START TLV in the filter configuration. This TLV is received from the monitor destination ring, and kzalloc for the mon_mpdu object occurs, which is not freed, leading to a memory leak. The kzalloc for the mon_mpdu object is only required while enabling the standalone monitor interface. This causes a memory leak while enabling extended statistics mode in the driver. Fix this memory leak by removing the kzalloc for the mon_mpdu object in the HAL_RX_MPDU_START TLV handling. Additionally, remove the standalone monitor mode handlings in the HAL_MON_BUF_ADDR and HAL_RX_MSDU_END TLVs. These TLV tags will be handled properly when enabling standalone monitor mode in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | ||||
| CVE-2025-23135 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Teardown riscv specific bits after kvm_exit During a module removal, kvm_exit invokes arch specific disable call which disables AIA. However, we invoke aia_exit before kvm_exit resulting in the following warning. KVM kernel module can't be inserted afterwards due to inconsistent state of IRQ. [25469.031389] percpu IRQ 31 still enabled on CPU0! [25469.031732] WARNING: CPU: 3 PID: 943 at kernel/irq/manage.c:2476 __free_percpu_irq+0xa2/0x150 [25469.031804] Modules linked in: kvm(-) [25469.031848] CPU: 3 UID: 0 PID: 943 Comm: rmmod Not tainted 6.14.0-rc5-06947-g91c763118f47-dirty #2 [25469.031905] Hardware name: riscv-virtio,qemu (DT) [25469.031928] epc : __free_percpu_irq+0xa2/0x150 [25469.031976] ra : __free_percpu_irq+0xa2/0x150 [25469.032197] epc : ffffffff8007db1e ra : ffffffff8007db1e sp : ff2000000088bd50 [25469.032241] gp : ffffffff8131cef8 tp : ff60000080b96400 t0 : ff2000000088baf8 [25469.032285] t1 : fffffffffffffffc t2 : 5249207570637265 s0 : ff2000000088bd90 [25469.032329] s1 : ff60000098b21080 a0 : 037d527a15eb4f00 a1 : 037d527a15eb4f00 [25469.032372] a2 : 0000000000000023 a3 : 0000000000000001 a4 : ffffffff8122dbf8 [25469.032410] a5 : 0000000000000fff a6 : 0000000000000000 a7 : ffffffff8122dc10 [25469.032448] s2 : ff60000080c22eb0 s3 : 0000000200000022 s4 : 000000000000001f [25469.032488] s5 : ff60000080c22e00 s6 : ffffffff80c351c0 s7 : 0000000000000000 [25469.032582] s8 : 0000000000000003 s9 : 000055556b7fb490 s10: 00007ffff0e12fa0 [25469.032621] s11: 00007ffff0e13e9a t3 : ffffffff81354ac7 t4 : ffffffff81354ac7 [25469.032664] t5 : ffffffff81354ac8 t6 : ffffffff81354ac7 [25469.032698] status: 0000000200000100 badaddr: ffffffff8007db1e cause: 0000000000000003 [25469.032738] [<ffffffff8007db1e>] __free_percpu_irq+0xa2/0x150 [25469.032797] [<ffffffff8007dbfc>] free_percpu_irq+0x30/0x5e [25469.032856] [<ffffffff013a57dc>] kvm_riscv_aia_exit+0x40/0x42 [kvm] [25469.033947] [<ffffffff013b4e82>] cleanup_module+0x10/0x32 [kvm] [25469.035300] [<ffffffff8009b150>] __riscv_sys_delete_module+0x18e/0x1fc [25469.035374] [<ffffffff8000c1ca>] syscall_handler+0x3a/0x46 [25469.035456] [<ffffffff809ec9a4>] do_trap_ecall_u+0x72/0x134 [25469.035536] [<ffffffff809f5e18>] handle_exception+0x148/0x156 Invoke aia_exit and other arch specific cleanup functions after kvm_exit so that disable gets a chance to be called first before exit. | ||||
| CVE-2025-23132 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: quota: fix to avoid warning in dquot_writeback_dquots() F2FS-fs (dm-59): checkpoint=enable has some unwritten data. ------------[ cut here ]------------ WARNING: CPU: 6 PID: 8013 at fs/quota/dquot.c:691 dquot_writeback_dquots+0x2fc/0x308 pc : dquot_writeback_dquots+0x2fc/0x308 lr : f2fs_quota_sync+0xcc/0x1c4 Call trace: dquot_writeback_dquots+0x2fc/0x308 f2fs_quota_sync+0xcc/0x1c4 f2fs_write_checkpoint+0x3d4/0x9b0 f2fs_issue_checkpoint+0x1bc/0x2c0 f2fs_sync_fs+0x54/0x150 f2fs_do_sync_file+0x2f8/0x814 __f2fs_ioctl+0x1960/0x3244 f2fs_ioctl+0x54/0xe0 __arm64_sys_ioctl+0xa8/0xe4 invoke_syscall+0x58/0x114 checkpoint and f2fs_remount may race as below, resulting triggering warning in dquot_writeback_dquots(). atomic write remount - do_remount - down_write(&sb->s_umount); - f2fs_remount - ioctl - f2fs_do_sync_file - f2fs_sync_fs - f2fs_write_checkpoint - block_operations - locked = down_read_trylock(&sbi->sb->s_umount) : fail to lock due to the write lock was held by remount - up_write(&sb->s_umount); - f2fs_quota_sync - dquot_writeback_dquots - WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount)) : trigger warning because s_umount lock was unlocked by remount If checkpoint comes from mount/umount/remount/freeze/quotactl, caller of checkpoint has already held s_umount lock, calling dquot_writeback_dquots() in the context should be safe. So let's record task to sbi->umount_lock_holder, so that checkpoint can know whether the lock has held in the context or not by checking current w/ it. In addition, in order to not misrepresent caller of checkpoint, we should not allow to trigger async checkpoint for those callers: mount/umount/remount/ freeze/quotactl. | ||||
| CVE-2025-22113 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid journaling sb update on error if journal is destroying Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg: (umount) ext4_kill_sb kill_block_super generic_shutdown_super sync_filesystem /* commits all txns */ evict_inodes /* might start a new txn */ ext4_put_super flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */ jbd2_journal_destroy journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; jbd2_journal_commit_transaction jbd2_journal_get_descriptor_buffer jbd2_journal_bmap ext4_journal_bmap ext4_map_blocks ... ext4_inode_error ext4_handle_error schedule_work(&sbi->s_sb_upd_work) /* work queue kicks in */ update_super_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT) Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit. Further, in the journal destroy path, we have the following sequence: 1. Set mount flag indicating journal is destroying 2. force a commit and wait for it 3. flush pending sb updates This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606) Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here. | ||||
| CVE-2025-21722 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: do not force clear folio if buffer is referenced Patch series "nilfs2: protect busy buffer heads from being force-cleared". This series fixes the buffer head state inconsistency issues reported by syzbot that occurs when the filesystem is corrupted and falls back to read-only, and the associated buffer head use-after-free issue. This patch (of 2): Syzbot has reported that after nilfs2 detects filesystem corruption and falls back to read-only, inconsistencies in the buffer state may occur. One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty() to set a data or metadata buffer as dirty, but it detects that the buffer is not in the uptodate state: WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520 fs/buffer.c:1177 ... Call Trace: <TASK> nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598 nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73 nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344 nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The other is when nilfs_btree_propagate(), which propagates the dirty state to the ancestor nodes of a b-tree that point to a dirty buffer, detects that the origin buffer is not dirty, even though it should be: WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089 nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089 ... Call Trace: <TASK> nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345 nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587 nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006 nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline] nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115 nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline] nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Both of these issues are caused by the callbacks that handle the page/folio write requests, forcibly clear various states, including the working state of the buffers they hold, at unexpected times when they detect read-only fallback. Fix these issues by checking if the buffer is referenced before clearing the page/folio state, and skipping the clear if it is. | ||||
| CVE-2025-21650 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 | ||||
| CVE-2024-58074 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Grab intel_display from the encoder to avoid potential oopsies Grab the intel_display from 'encoder' rather than 'state' in the encoder hooks to avoid the massive footgun that is intel_sanitize_encoder(), which passes NULL as the 'state' argument to encoder .disable() and .post_disable(). TODO: figure out how to actually fix intel_sanitize_encoder()... | ||||
| CVE-2024-57975 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do proper folio cleanup when run_delalloc_nocow() failed [BUG] With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash with the following VM_BUG_ON_FOLIO(): BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28 BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28 page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664 aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774" flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff) page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio)) ------------[ cut here ]------------ kernel BUG at mm/page-writeback.c:2992! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ #87 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : folio_clear_dirty_for_io+0x128/0x258 lr : folio_clear_dirty_for_io+0x128/0x258 Call trace: folio_clear_dirty_for_io+0x128/0x258 btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs] __process_folios_contig+0x154/0x268 [btrfs] extent_clear_unlock_delalloc+0x5c/0x80 [btrfs] run_delalloc_nocow+0x5f8/0x760 [btrfs] btrfs_run_delalloc_range+0xa8/0x220 [btrfs] writepage_delalloc+0x230/0x4c8 [btrfs] extent_writepage+0xb8/0x358 [btrfs] extent_write_cache_pages+0x21c/0x4e8 [btrfs] btrfs_writepages+0x94/0x150 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x88/0xc8 start_delalloc_inodes+0x178/0x3a8 [btrfs] btrfs_start_delalloc_roots+0x174/0x280 [btrfs] shrink_delalloc+0x114/0x280 [btrfs] flush_space+0x250/0x2f8 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x164/0x408 worker_thread+0x25c/0x388 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000) ---[ end trace 0000000000000000 ]--- [CAUSE] The first two lines of extra debug messages show the problem is caused by the error handling of run_delalloc_nocow(). E.g. we have the following dirtied range (4K blocksize 4K page size): 0 16K 32K |//////////////////////////////////////| | Pre-allocated | And the range [0, 16K) has a preallocated extent. - Enter run_delalloc_nocow() for range [0, 16K) Which found range [0, 16K) is preallocated, can do the proper NOCOW write. - Enter fallback_to_fow() for range [16K, 32K) Since the range [16K, 32K) is not backed by preallocated extent, we have to go COW. - cow_file_range() failed for range [16K, 32K) So cow_file_range() will do the clean up by clearing folio dirty, unlock the folios. Now the folios in range [16K, 32K) is unlocked. - Enter extent_clear_unlock_delalloc() from run_delalloc_nocow() Which is called with PAGE_START_WRITEBACK to start page writeback. But folios can only be marked writeback when it's properly locked, thus this triggered the VM_BUG_ON_FOLIO(). Furthermore there is another hidden but common bug that run_delalloc_nocow() is not clearing the folio dirty flags in its error handling path. This is the common bug shared between run_delalloc_nocow() and cow_file_range(). [FIX] - Clear folio dirty for range [@start, @cur_offset) Introduce a helper, cleanup_dirty_folios(), which will find and lock the folio in the range, clear the dirty flag and start/end the writeback, with the extra handling for the @locked_folio. - Introduce a helper to clear folio dirty, start and end writeback - Introduce a helper to record the last failed COW range end This is to trace which range we should skip, to avoid double unlocking. - Skip the failed COW range for the e ---truncated--- | ||||
| CVE-2024-57857 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Remove direct link to net_device Do not manage a per device direct link to net_device. Rely on associated ib_devices net_device management, not doubling the effort locally. A badly managed local link to net_device was causing a 'KASAN: slab-use-after-free' exception during siw_query_port() call. | ||||
| CVE-2024-57809 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: imx6: Fix suspend/resume support on i.MX6QDL The suspend/resume functionality is currently broken on the i.MX6QDL platform, as documented in the NXP errata (ERR005723): https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf This patch addresses the issue by sharing most of the suspend/resume sequences used by other i.MX devices, while avoiding modifications to critical registers that disrupt the PCIe functionality. It targets the same problem as the following downstream commit: https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995 Unlike the downstream commit, this patch also resets the connected PCIe device if possible. Without this reset, certain drivers, such as ath10k or iwlwifi, will crash on resume. The device reset is also done by the driver on other i.MX platforms, making this patch consistent with existing practices. Upon resuming, the kernel will hang and display an error. Here's an example of the error encountered with the ath10k driver: ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible Unhandled fault: imprecise external abort (0x1406) at 0x0106f944 Without this patch, suspend/resume will fail on i.MX6QDL devices if a PCIe device is connected. [kwilczynski: commit log, added tag for stable releases] | ||||
| CVE-2024-56702 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark raw_tp arguments with PTR_MAYBE_NULL Arguments to a raw tracepoint are tagged as trusted, which carries the semantics that the pointer will be non-NULL. However, in certain cases, a raw tracepoint argument may end up being NULL. More context about this issue is available in [0]. Thus, there is a discrepancy between the reality, that raw_tp arguments can actually be NULL, and the verifier's knowledge, that they are never NULL, causing explicit NULL checks to be deleted, and accesses to such pointers potentially crashing the kernel. To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special case the dereference and pointer arithmetic to permit it, and allow passing them into helpers/kfuncs; these exceptions are made for raw_tp programs only. Ensure that we don't do this when ref_obj_id > 0, as in that case this is an acquired object and doesn't need such adjustment. The reason we do mask_raw_tp_trusted_reg logic is because other will recheck in places whether the register is a trusted_reg, and then consider our register as untrusted when detecting the presence of the PTR_MAYBE_NULL flag. To allow safe dereference, we enable PROBE_MEM marking when we see loads into trusted pointers with PTR_MAYBE_NULL. While trusted raw_tp arguments can also be passed into helpers or kfuncs where such broken assumption may cause issues, a future patch set will tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can already be passed into helpers and causes similar problems. Thus, they are left alone for now. It is possible that these checks also permit passing non-raw_tp args that are trusted PTR_TO_BTF_ID with null marking. In such a case, allowing dereference when pointer is NULL expands allowed behavior, so won't regress existing programs, and the case of passing these into helpers is the same as above and will be dealt with later. Also update the failure case in tp_btf_nullable selftest to capture the new behavior, as the verifier will no longer cause an error when directly dereference a raw tracepoint argument marked as __nullable. [0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb | ||||
| CVE-2024-56544 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udmabuf: change folios array from kmalloc to kvmalloc When PAGE_SIZE 4096, MAX_PAGE_ORDER 10, 64bit machine, page_alloc only support 4MB. If above this, trigger this warn and return NULL. udmabuf can change size limit, if change it to 3072(3GB), and then alloc 3GB udmabuf, will fail create. [ 4080.876581] ------------[ cut here ]------------ [ 4080.876843] WARNING: CPU: 3 PID: 2015 at mm/page_alloc.c:4556 __alloc_pages+0x2c8/0x350 [ 4080.878839] RIP: 0010:__alloc_pages+0x2c8/0x350 [ 4080.879470] Call Trace: [ 4080.879473] <TASK> [ 4080.879473] ? __alloc_pages+0x2c8/0x350 [ 4080.879475] ? __warn.cold+0x8e/0xe8 [ 4080.880647] ? __alloc_pages+0x2c8/0x350 [ 4080.880909] ? report_bug+0xff/0x140 [ 4080.881175] ? handle_bug+0x3c/0x80 [ 4080.881556] ? exc_invalid_op+0x17/0x70 [ 4080.881559] ? asm_exc_invalid_op+0x1a/0x20 [ 4080.882077] ? udmabuf_create+0x131/0x400 Because MAX_PAGE_ORDER, kmalloc can max alloc 4096 * (1 << 10), 4MB memory, each array entry is pointer(8byte), so can save 524288 pages(2GB). Further more, costly order(order 3) may not be guaranteed that it can be applied for, due to fragmentation. This patch change udmabuf array use kvmalloc_array, this can fallback alloc into vmalloc, which can guarantee allocation for any size and does not affect the performance of kmalloc allocations. | ||||
| CVE-2024-53219 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtiofs: use pages instead of pointer for kernel direct IO When trying to insert a 10MB kernel module kept in a virtio-fs with cache disabled, the following warning was reported: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ...... Modules linked in: CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:__alloc_pages+0x2bf/0x380 ...... Call Trace: <TASK> ? __warn+0x8e/0x150 ? __alloc_pages+0x2bf/0x380 __kmalloc_large_node+0x86/0x160 __kmalloc+0x33c/0x480 virtio_fs_enqueue_req+0x240/0x6d0 virtio_fs_wake_pending_and_unlock+0x7f/0x190 queue_request_and_unlock+0x55/0x60 fuse_simple_request+0x152/0x2b0 fuse_direct_io+0x5d2/0x8c0 fuse_file_read_iter+0x121/0x160 __kernel_read+0x151/0x2d0 kernel_read+0x45/0x50 kernel_read_file+0x1a9/0x2a0 init_module_from_file+0x6a/0xe0 idempotent_init_module+0x175/0x230 __x64_sys_finit_module+0x5d/0xb0 x64_sys_call+0x1c3/0x9e0 do_syscall_64+0x3d/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ...... </TASK> ---[ end trace 0000000000000000 ]--- The warning is triggered as follows: 1) syscall finit_module() handles the module insertion and it invokes kernel_read_file() to read the content of the module first. 2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and passes it to kernel_read(). kernel_read() constructs a kvec iter by using iov_iter_kvec() and passes it to fuse_file_read_iter(). 3) virtio-fs disables the cache, so fuse_file_read_iter() invokes fuse_direct_io(). As for now, the maximal read size for kvec iter is only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so fuse_direct_io() doesn't split the 10MB buffer. It saves the address and the size of the 10MB-sized buffer in out_args[0] of a fuse request and passes the fuse request to virtio_fs_wake_pending_and_unlock(). 4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to queue the request. Because virtiofs need DMA-able address, so virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for all fuse args, copies these args into the bounce buffer and passed the physical address of the bounce buffer to virtiofsd. The total length of these fuse args for the passed fuse request is about 10MB, so copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and it triggers the warning in __alloc_pages(): if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)) return NULL; 5) virtio_fs_enqueue_req() will retry the memory allocation in a kworker, but it won't help, because kmalloc() will always return NULL due to the abnormal size and finit_module() will hang forever. A feasible solution is to limit the value of max_read for virtio-fs, so the length passed to kmalloc() will be limited. However it will affect the maximal read size for normal read. And for virtio-fs write initiated from kernel, it has the similar problem but now there is no way to limit fc->max_write in kernel. So instead of limiting both the values of max_read and max_write in kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use pages instead of pointer to pass the KVEC_IO data. After switching to pages for KVEC_IO data, these pages will be used for DMA through virtio-fs. If these pages are backed by vmalloc(), {flush|invalidate}_kernel_vmap_range() are necessary to flush or invalidate the cache before the DMA operation. So add two new fields in fuse_args_pages to record the base address of vmalloc area and the condition indicating whether invalidation is needed. Perform the flush in fuse_get_user_pages() for write operations and the invalidation in fuse_release_user_pages() for read operations. It may seem necessary to introduce another fie ---truncated--- | ||||