Export limit exceeded: 25815 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25815 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64416 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: swap_cgroup: fix NULL deref in lookup_swap_cgroup_id on swapless host lookup_swap_cgroup_id() passes swap_cgroup_ctrl[type].map to __swap_cgroup_id_lookup() without checking that the type was ever registered via swap_cgroup_swapon(). On a swapless host every ctrl->map is NULL, so __swap_cgroup_id_lookup() dereferences NULL + a scaled swp_offset(). Since commit bea67dcc5eea ("mm: attempt to batch free swap entries for zap_pte_range()"), zap_pte_range() -> swap_pte_batch() calls lookup_swap_cgroup_id() on any non-present, non-none PTE that decodes as a real swap entry, without first validating it against swap_info[]. A single PTE corrupted into a type-0 swap entry takes the host down at process exit. We hit this in production on a swapless 6.12.58 host: ~1s of "get_swap_device: Bad swap file entry 3f800204222bb" (do_swap_page() being correctly defensive about the same entry) followed by BUG: unable to handle page fault for address: 000003f800204220 RIP: 0010:lookup_swap_cgroup_id+0x2b/0x60 Call Trace: swap_pte_batch+0xbf/0x230 zap_pte_range+0x4c8/0x780 unmap_page_range+0x190/0x3e0 exit_mmap+0xd9/0x3c0 do_exit+0x20c/0x4b0 syzbot has reported the identical stack. The source of the PTE corruption is a separate bug; this change makes the teardown path as robust as the fault path already is. Every other caller of lookup_swap_cgroup_id() is downstream of a get_swap_device() that has already validated the entry, so the new branch is cold. | ||||
| CVE-2026-64553 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: psample: fix info leak in PSAMPLE_ATTR_DATA psample open codes nla_put() presumably to avoid wiping the data with 0s just to override it with packet data. This open coding is missing clearing the pad, however, each netlink attr is padded to 4B and data_len may not be divisible by 4B. | ||||
| CVE-2023-4244 | 3 Debian, Linux, Redhat | 5 Debian Linux, Linux Kernel, Enterprise Linux and 2 more | 2026-07-28 | 7.8 High |
| A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. Due to a race condition between nf_tables netlink control plane transaction and nft_set element garbage collection, it is possible to underflow the reference counter causing a use-after-free vulnerability. We recommend upgrading past commit 3e91b0ebd994635df2346353322ac51ce84ce6d8. | ||||
| CVE-2026-53159 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix DMA address corruption due to find_vma misuse fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided pointer and compute a DMA address offset. When the address falls in a gap before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows, corrupting the DMA address sent to the DSP. Replace find_vma() with vma_lookup(), which returns NULL when the address is not contained within any VMA. | ||||
| CVE-2026-13825 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-07-28 | 8.8 High |
| Uninitialized Use in Dawn in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-13882 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-07-28 | 9.6 Critical |
| Race in USB in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-13945 | 2 Google, Linux | 2 Chrome, Linux Kernel | 2026-07-28 | 3.1 Low |
| Insufficient policy enforcement in Extensions in Google Chrome on Linux prior to 150.0.7871.47 allowed an attacker who convinced a user to install a malicious extension to perform UI spoofing via a crafted Chrome Extension. (Chromium security severity: Medium) | ||||
| CVE-2026-15764 | 2 Google, Linux | 2 Chrome, Linux Kernel | 2026-07-28 | 7.5 High |
| Use after free in Ozone in Google Chrome on Linux prior to 150.0.7871.125 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Critical) | ||||
| CVE-2026-8505 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-27 | 9.8 Critical |
| IBM Langflow OSS 1.0.0 through 1.10.0 has a vulnerability in Langflow's webhook authentication logic allows unauthenticated users to trigger the execution of any flow. The system incorrectly bypasses API key validation when the WEBHOOK_AUTH_ENABLE configuration is set to False (which is the default setting). This allows a remote attacker who knows a flow's UUID to execute it as if they were the owner, potentially leading to Remote Code Execution (RCE). | ||||
| CVE-2026-63864 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Propagate error from visit_tailcall_insn Commit e40f5a6bf88a ("bpf: correct stack liveness for tail calls") added visit_tailcall_insn() but did not check its return value. | ||||
| CVE-2026-63890 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the descriptor cursor by an attacker-supplied fip_dlen without ever requiring dlen >= sizeof(struct fip_desc) in the default branch. The named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor (fip_dtype >= 128, which the standard requires receivers to silently ignore) skipped that check entirely. An unauthenticated L2 peer on the FCoE control VLAN could hang fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely by emitting one FIP CVL frame whose single descriptor had fip_dtype == FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes per iteration and the loop condition rlen >= sizeof(*desc) stayed true forever, blocking every subsequent FIP frame on that controller. Tighten the outer dlen guard to also reject dlen < sizeof(struct fip_desc), so a malformed descriptor whose length cannot even cover the descriptor header is rejected before the switch. This is the same lower-bound the named cases already apply and is the minimum scope that closes the loop. | ||||
| CVE-2026-63891 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Cap recursion depth in __tb_property_parse_dir() A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line. | ||||
| CVE-2026-63895 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: copy only received bytes on short ep0 read ffs_ep0_read() allocates its control-OUT data buffer with kmalloc() (not kzalloc) at the Length value from the Setup packet, then copies that full len to userspace regardless of how many bytes were actually received: data = kmalloc(len, GFP_KERNEL); ... ret = __ffs_ep0_queue_wait(ffs, data, len); if ((ret > 0) && (copy_to_user(buf, data, len))) ret = -EFAULT; __ffs_ep0_queue_wait() returns req->actual, which on a short control OUT transfer is strictly less than len. The copy_to_user() call still copies len bytes, so on a short OUT the last (len - ret) bytes of the kmalloc() buffer -- uninitialised slab residue -- are delivered to the FunctionFS daemon. Short ep0 OUT completions are specified USB control-transfer behavior and are produced by in-tree UDCs: * dwc2 continues on req->actual < req->length for ep0 DATA OUT (short-not-ok is the only ep0-OUT stall path). * aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket. * renesas_usbf logs "ep0 short packet" and completes the request. * dwc3 stalls on short IN but not on short OUT. A short ep0 OUT is therefore not evidence of a broken UDC; it is a normal condition f_fs has to cope with. The sibling gadgetfs implementation in drivers/usb/gadget/legacy/inode.c already does this correctly via min(len, dev->req->actual) before copy_to_user(). This patch brings f_fs.c to the same safe pattern rather than trimming at a defensive layer. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace. Linux host stacks normally reject short-wLength control OUTs before they reach the gadget, so reproducing this required a build that bypasses that host-side check. With the bypass in place, a 1-byte payload on a 64-byte Setup produces 63 bytes of non-canary slab residue in the daemon's read buffer. Fix by copying only ret (actually received) bytes to userspace. | ||||
| CVE-2026-63903 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: belkin_sa: validate interrupt status length The Belkin interrupt callback treats interrupt data as a four-byte status report and reads LSR/MSR fields at offsets 2 and 3. The interrupt-in buffer length is derived from endpoint wMaxPacketSize, and short interrupt transfers may complete successfully with a smaller actual_length. Check the completed interrupt packet length before parsing status fields so short interrupt endpoints and short successful packets are ignored instead of causing out-of-bounds or stale status-byte reads. KASAN report as below: BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback() Read of size 1 Call trace: belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202) __usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630) dummy_timer() (?:?) | ||||
| CVE-2026-63904 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: check URB actual_length for interrupt-IN notifications USBTMC devices can use an optional interrupt endpoint for notification messages. These typically contain two-byte headers indicating the payload format, but the driver does not check if these headers are present before accessing the data buffers. In cases where the URB actual_length is not enough to fit these headers, the driver will either cause an out-of-bounds read, or consume stale leftover data from a previous notification. Fix by checking if actual_data contains enough bytes for the headers, otherwise resubmit URB to the interrupt endpoint. | ||||
| CVE-2026-63908 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=. | ||||
| CVE-2026-63949 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix OOB read on zero-length message_store() linedisp_display() unconditionally reads msg[count - 1] before checking whether count is zero, so a write of zero bytes to the message sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB read The kernfs write buffer for that store is a 1-byte allocation (kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0), so msg[-1] is a 1-byte read before the slab object. On a KASAN-enabled kernel this trips an out-of-bounds report and panics; on stock kernels it silently reads adjacent slab data and, if that byte happens to be '\n', the following count-- wraps ssize_t 0 to -1 and is then passed to kmemdup_nul(). linedisp_display() is reached from the message_store() sysfs callback (drivers/auxdisplay/line-display.c message attribute, mode 0644) and from the in-tree initial-message setup with count == -1, so the OOB path is only userspace-triggerable via zero-byte writes; vfs_write() does not short-circuit on count == 0 and kernfs_fop_write_iter() dispatches the store callback regardless. Guard the trailing-newline trim with a count check. The existing if (!count) block then takes the clear-display path unchanged. Affects every auxdisplay driver that registers via linedisp_register() / linedisp_attach(): ht16k33, max6959, img-ascii-lcd, seg-led-gpio. | ||||
| CVE-2026-63955 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: do not trigger BUG() on BH disabled context __get_vm_area_node() currently triggers a BUG() if in_interrupt() returns true. However, in_interrupt() also reports true when BH are disabled. The bridge code can call rhashtable_lookup_insert_fast() with bottom halves disabled: __vlan_add() -> br_fdb_add_local() spin_lock_bh(&br->hash_lock); <-- Disable BH -> fdb_add_local() -> fdb_create() -> rhashtable_lookup_insert_fast() -> kvmalloc() -> vmalloc() -> __get_vm_area_node() -> BUG_ON(in_interrupt()) spin_unlock_bh(&br->hash_lock) this triggers the BUG() despite the caller not being in NMI or hard IRQ context. Replace the in_interrupt() check with in_nmi() || in_hardirq(). | ||||
| CVE-2026-63961 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: validate count before reading Status Update VDO A broken/malicious device can send the incorrect count for a status update VDO, which will cause the kernel to read uninitialized stack data and send it off elsewhere. Fix this up by correctly verifying the count for the update object. | ||||
| CVE-2026-64265 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req When fuse_resend() moves a request from fpq->processing back to fiq->pending, it sets FR_PENDING and clears FR_SENT but does not remove the requests intr_entry from fiq->interrupts. If the request had FR_INTERRUPTED set from a prior signal, intr_entry remains dangling on fiq->interrupts. When the requesting task then receives a fatal signal, fuse_remove_pending_req() sees FR_PENDING=1, removes the request from fiq->pending and frees it via the refcount path, also without cleaning intr_entry. The stale intr_entry causes use-after-free when fuse_read_interrupt() iterates fiq->interrupts: - list_del_init(&req->intr_entry) -> UAF write on freed slab - req->in.h.unique -> UAF read, data leaked to userspace Remove intr_entry from fiq->interrupts in fuse_resend() for interrupted requests before they are placed back on fiq->pending. Add a WARN_ON if the intr_entry is not empty on request destruction. | ||||