Export limit exceeded: 413280 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413280 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-2182 | 1 Redhat | 3 Enterprise Linux, Openshift, Openstack | 2026-10-19 | 6.5 Medium |
| A flaw was found in the Open Virtual Network (OVN). In OVN clusters where BFD is used between hypervisors for high availability, an attacker can inject specially crafted BFD packets from inside unprivileged workloads, including virtual machines or containers, that can trigger a denial of service. | ||||
| CVE-2026-98685 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: discard post-EOF pagecache when extending a file via clone range cifs_remap_file_range() discarded the pagecache only for the folios overlapping the destination region, so when a clone extends the file the folio straddling the old EOF - which may hold data dirtied past EOF through an mmap - was never dropped and became visible as file content once the file was extended. Start the discard at the smaller of fstart and the old EOF. i_size is still old here, so nothing past the old EOF is flushed to the server. | ||||
| CVE-2026-98680 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kionix-kx022a: Prevent memory leak and fix state The driver allocates memory for samples at buffer enable path. If regmap operation fails in the kx022a_fifo_enable() at the buffer enable path, the allocated memory is never freed. Furthermore, the state information and previous hardware configuration(s) aren't undone, potentially leaving WMI interrupts and buffers enabled, or driver state flags wrong. Free the memory and revert the hardware configuration and state flags on error path. | ||||
| CVE-2026-98676 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: fix NULL pointer dereference in clkout registration ade9000_setup_clkout() passes NULL as the register address when registering a divider clock. During clock registration, the common clock framework calls clk_divider_recalc_rate(), which dereferences the address through readl(). As a result, probing an ADE9000 configured as a clock provider with an external input clock crashes. CLKOUT passes CLKIN through without changing its rate. Register it as a 1:1 fixed-factor clock, which does not require register access. This change does not affect the configuration using the internal clock, for which the driver does not register a clock provider. | ||||
| CVE-2026-98675 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: handle Phase C dip events in IRQ1 handler ADE9000_ST1_CROSSING_DEPTH is the exclusive upper bound for scanning the STATUS1 event bits, so a value of 25 left out the highest event bit, ADE9000_ST1_DIPC_BIT (bit 25). Phase C dip events were never reported. Bump the value to 26 so bit 25 is scanned. | ||||
| CVE-2026-98674 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: adi-axi-adc: Initialize state mutex The AXI ADC register access paths serialize transactions with st->lock, but probe does not initialize it. Initialize the mutex before registering the backend. | ||||
| CVE-2026-98661 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: rohm-bu27034: Fix infinite delay on error When reading an integration-time fails, the code will use error code to compute the sleep time. Fix this by using the smallest integration time as a default if reading fails. | ||||
| CVE-2026-98659 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: pressure: rohm-bm1390: Return error when read fails The data reading function ignores the cached error value, and unconditionally returns 0. Return cached 'ret' -value after stopping the measurement so user knows if read failed and data is garbage. | ||||
| CVE-2026-98658 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: proximity: aw96103: validate firmware data length The firmware parser reads a length from the binary header and then uses it to walk six-byte register/value entries. A truncated firmware image can make the parser read beyond the copied firmware buffer. A value smaller than the four-byte count field also underflows, producing a very large length. Read the little-endian field with get_unaligned_le32(), as previously proposed by David Lechner. Validate the header size, reject an underflowed length, ensure the resulting payload is contained in the firmware image, and require it to contain whole register/value entries. | ||||
| CVE-2026-98653 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix _gaccess_shadow_fault() In some circumstances, it is possible that the page of nested guest memory that is being shadowed is not present at all in the parent guest gmap. dat_entry_walk() will not find any leaf entry and return with -ENOENT, which will erroneously be propagated all the way to userspace. Fix by manually calling gmap_link() on the memory of the nested guest that is being shadowed if the mapping was not already present. | ||||
| CVE-2026-98652 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Add missing srcu in kvm_s390_set_irq_state() Like kvm_s390_inject_vcpu(), kvm_s390_set_irq_state() also needs the kvm->srcu or the slots lock when performing the Store status operation. Fix by taking kvm->srcu in kvm_s390_set_irq_state(). | ||||
| CVE-2026-98651 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key() Some callers pass NULL as oldkey. Calling page_cond_set_storage_key() will cause that NULL pointer to get dereferenced. Fix by checking for NULL and assigning the pointer to a dummy local variable to avoid crashes. | ||||
| CVE-2026-98650 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix potential races in dat skey functions When dat_cond_set_storage_key() finds a large page, it will conditionally set the storage key in absolute memory using large_crste_to_phys() to get the absolute address. There is a race window between dat_entry_walk() and large_crste_to_phys(): the large page could have been split concurrently, and large_crste_to_phys() might be called with a crste that does not designate a large page, leading to crashes. Similar issues were also present in dat_set_storage_key(). dat_get_storage_key() and dat_reset_reference_bit() did instead check for a potential concurrent splitting of the large page, but then handled it incorrectly. Fix by performing a READ_ONCE on the crste pointer, checking and using the result, instead of dereferencing the pointer again. In case a race is detacted, try dat_entry_walk() again. | ||||
| CVE-2026-98649 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix race in _destroy_pages_crste() Use READ_ONCE() in _destroy_pages_crste() to read the crste, avoid dereferencing the pointer multiple times. | ||||
| CVE-2026-98648 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/uv: Prevent potential out-of-bounds read When the system has more than 85 secrets, the uv_secret_list struct array only holds up to 85 items per page, resulting in an out of bounds read in find_secret_in_page if the targeted secret is in the next page or not stored at all. Fix this by looping over the number of stored secrets which is the per sub-list count of stored secrets and not the overall count. | ||||
| CVE-2026-98646 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If the sock is a listener that still has children in its accept queue, tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched() there trips the debug check: BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 locks held by test_progs/628: 3, last CPU#3: #0: ffff8881158cee18 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x56/0x1210 #1: ffff8881106bb858 (sk_lock-AF_INET6){+.+.}-{0:0}, at: bpf_iter_tcp_seq_show+0x32b/0x4b0 #2: ffffffffb435af20 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x46b/0xde0 CPU: 3 UID: 0 PID: 628 Comm: test_progs Tainted: G W 7.2.0+ #65 PREEMPT Tainted: [W]=WARN Call Trace: <TASK> dump_stack_lvl+0xc1/0xf0 dump_stack+0x10/0x20 __might_resched+0x3d2/0x610 inet_csk_listen_stop+0x7b/0xbf0 tcp_abort+0x23b/0x3b0 bpf_sock_destroy+0xfc/0x140 bpf_prog_448133d24601754f_iter_tcp6_server+0x81/0x8a bpf_iter_run_prog+0x538/0xde0 bpf_iter_tcp_seq_show+0x26b/0x4b0 bpf_seq_read+0x424/0x1210 vfs_read+0x197/0xe40 ksys_read+0x119/0x240 __x64_sys_read+0x72/0xc0 x64_sys_call+0x647/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fad39b28aca RSP: 002b:00007ffc381c61c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007ffc381c6a88 RCX: 00007fad39b28aca RDX: 0000000000000032 RSI: 00007ffc381c6250 RDI: 0000000000000014 RBP: 00007ffc381c61e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000000 R14: 000055f077c1bbb0 R15: 00007fad3a0f3000 </TASK> The commit that added the kfunc already guards lock_sock() in tcp_abort() and udp_abort() with has_current_bpf_ctx(), but missed the listener path. Do the same for the cond_resched(). The loop runs inside the iterator's rcu_read_lock(), it must not reschedule or report a quiescent state there. | ||||
| CVE-2026-98639 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: riscv: Fix NACL hfence entry update order The SBI v3.0 specification (section 15.1.2) requires a nested HFENCE entry to be populated as follows: 1) find an unused entry with Config.Pending == 0 2) update the Page_Number and Page_Count words 3) update the Config word with Config.Pending set __kvm_riscv_nacl_hfence() writes the Config word first, so the SBI implementation (or NACL hardware) can observe a pending entry with pnum/pcount values left over from the previous use of that entry, resulting in incorrect TLB flush ranges. Write pnum and pcount first and the Config word last. Since the consumer is an external agent on coherent shared memory, use WRITE_ONCE() to stop the compiler from reordering the stores and smp_wmb() to make the parameter words globally visible before the Pending bit is set. | ||||
| CVE-2026-98638 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Validate the SVE vector length in pkvm_vcpu_init_sve() pkvm_vcpu_init_sve() clamps only the upper bound of the host-provided sve_max_vl, so an invalid vector length reaches sve_state_size_from_vl() and the WARN_ON() there, which is fatal at EL2. The existing !sve_state_size test rejects such a length, but only after the macro has run. Check sve_vl_valid() before deriving the state size. A valid length cannot yield a zero size, so the !sve_state_size test goes with it. | ||||
| CVE-2026-98637 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Do not clear VM-wide SVE feature on vCPU init failure pkvm_vcpu_init_sve() clears KVM_ARM_VCPU_SVE in kvm->arch.vcpu_features when it fails, but vcpu_has_sve() tests KVM_ARCH_FLAG_GUEST_HAS_SVE, which is left set. Later vCPUs on that VM then skip the SVE setup and register with a NULL sve_state, which the guest's first FP access hands to sve_load_state(). Return the error without touching vcpu_features. | ||||
| CVE-2026-98636 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: squashfs: Add dictionary size range check to prevent shift-out-of-bounds When an abnormal SquashFS image (COMP_OPTS flag is 1 but dictionary size is 0) is mounted, and performs shift operations using dictionarysize, the shift exponent is -1, causing a shift-out-of-bounds. Detail as below: squashfs_comp_opts(msblk, buffer, length) squashfs_xz_comp_opts() if (comp_opts) n = ffs(opts->dict_size) - 1;<----opts->dict_size=0, n=-1 if (opts->dict_size != (1 << n) && opts->dict_size != (1 << n) + (1 << (n + 1))) <----shift-out-of-bounds Fix it by adding a dictionary size range check before the shift operation. | ||||