Export limit exceeded: 408469 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 408469 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408469 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-76664 | 2026-10-15 | 6.4 Medium | ||
| A security vulnerability in HPE NonStop EXPAND may result in out-of-bounds memory read/write operations | ||||
| CVE-2026-98417 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: xfrm: reject unrepresentable espintcp transport headers ESP-in-TCP can hand xfrm packets whose transport header offset no longer fits after the stream parser trims the TCP envelope. The plain transport header reset truncates that offset and triggers the skb warning path. Use the careful transport-header helper and drop the skb through the existing XFRM error path when the offset cannot be represented. | ||||
| CVE-2026-98419 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix out-of-bounds write in reset_per_cpu_data() In reset_per_cpu_data(), al is computed as: al = sizeof(struct net_dm_alert_msg); al += dm_hit_limit * sizeof(struct net_dm_drop_point); al += sizeof(struct nlattr); skb = genlmsg_new(al, GFP_KERNEL); ... nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg)); ... msg = nla_data(nla); memset(msg, 0, al); Because al includes sizeof(struct nlattr) (the 4-byte attribute header), genlmsg_new() allocates al bytes of tailroom starting at nla. However, msg points to nla_data(nla), which is located sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al) therefore writes al bytes starting from msg, exceeding the allocated buffer by sizeof(struct nlattr) (4 bytes) and corrupting skb_shared_info. Fix this by letting al represent only the payload length, allocating the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing al bytes from msg. | ||||
| CVE-2026-98426 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix IRQ leak using wrong index in MSI-X error path mwifiex_pcie_request_irq() registers each MSI-X vector with a per-index dev_id (&card->msix_ctx[i]). On a request_irq() failure the cleanup loop "for (j = 0; j < i; j++)" frees msix_entries[j].vector but passes the failed index's &card->msix_ctx[i] as the dev_id. free_irq() matches on (irq, dev_id), so it fails to find the action registered with &card->msix_ctx[j]: the already-requested IRQ j is not freed (leaked) and free_irq() warns about freeing a non-existent IRQ. Use &card->msix_ctx[j]. | ||||
| CVE-2026-98399 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block Unlike kdump, which passes the re-IPL parameter block through os_info, the stand-alone dump passes it through the IPL parm block address and checksum in lowcore. Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case reipl_type_init() selects IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless, dump_reipl_run() unconditionally dereferences it when preparing the lowcore fields. This may happen to work by chance when address zero contains readable lowcore data. A zero IPL parameter block address is then stored in lowcore, causing the stand-alone dumper to enter disabled wait after completing the dump. Explicitly store a zero IPL parameter block address and checksum when no re-IPL parameter block is available. This does not change the behavior: the stand-alone dumper completes the dump and halts, while valid re-IPL parameter blocks continue to be handled as before. | ||||
| CVE-2026-98400 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in kdump without re-IPL parm block Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case, reipl_type_init() selects IPL_TYPE_UNKNOWN, and reipl_block_actual remains NULL. kdump passes the re-IPL parameter block to the dump kernel through os_info. Before commit 3b9678472bab ("s390/ipl: correct kdump reipl block checksum calculation"), the os_info entry was added only for IPL types which initialized reipl_block_actual. That commit moved the os_info update to machine_crash_shutdown(), making it unconditional. As a result, set_os_info_reipl_block() dereferences reipl_block_actual for IPL_TYPE_UNKNOWN. This may happen to work by chance when address zero contains readable lowcore data and the resulting empty os_info entry is ignored by the dump kernel. Skip the os_info update when no re-IPL parameter block is available. Kdump then collect the dump and reboot without setting re-IPL parameter block. | ||||
| CVE-2026-98402 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: icmp: avoid invalid transport header access in icmp_send tracepoint syzbot reported a WARNING triggered by DEBUG_NET_WARN_ON_ONCE(): WARNING: at skb_transport_header include/linux/skbuff.h:3087 [inline] WARNING: at udp_hdr include/linux/udp.h:23 [inline] WARNING: at do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline] WARNING: at trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11 Call trace: skb_transport_header include/linux/skbuff.h:3087 [inline] udp_hdr include/linux/udp.h:23 [inline] do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline] trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11 __traceiter_icmp_send include/trace/events/icmp.h:11 [inline] __do_trace_icmp_send include/trace/events/icmp.h:11 [inline] trace_icmp_send+0x320/0x49c include/trace/events/icmp.h:11 __icmp_send+0xcfc/0x11d8 net/ipv4/icmp.c:1013 ipv4_send_dest_unreach net/ipv4/route.c:1280 [inline] ipv4_link_failure+0x57c/0x8dc net/ipv4/route.c:1287 dst_link_failure include/net/dst.h:438 [inline] vti_tunnel_xmit+0xe40/0x17a4 net/ipv4/ip_vti.c:307 TP_fast_assign() unconditionally calls udp_hdr(skb) before checking whether the packet is UDP. Furthermore, __icmp_send() can be invoked from paths (e.g., link failures, ARP errors, forwarding, AF_PACKET) where skb->transport_header was never initialized (~0U). Under CONFIG_DEBUG_NET=y, calling skb_transport_header(skb) triggers DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)). Fix this by: 1. Only parsing transport info when iph->protocol == IPPROTO_UDP. 2. Using skb_header_pointer() at skb_network_offset(skb) + (iph->ihl << 2) to safely fetch the UDP header without assuming transport_header is set. | ||||
| CVE-2026-98404 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix a NULL vs ERR_PTR() bug in virtio_gpu_user_framebuffer_create() Smatch complains that returning a NULL here will lead to a NULL pointer dereference in drm_mode_addfb2(). Return an error pointer instead. | ||||
| CVE-2026-98407 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: fix heap OOB write on key removal When a key is removed (data == NULL), rsi_hal_load_key() runs: memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ); set_key is a struct rsi_set_key *, so the subscript is scaled by sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is skb->data + 2560, and the memset writes 144 zero bytes starting 2.4KB past the end of the 160-byte skb data buffer, corrupting unrelated heap objects. The intended byte offset would have been (u8 *)set_key + FRAME_DESC_SZ. The write fires on every DISABLE_KEY callback, so plain disconnects, roams and interface teardowns trigger it on real networks. The memset is redundant: the whole buffer is zeroed right after allocation, so the frame sent to the device is byte-identical without it. Drop the else branch; normal operation is unaffected. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-98408 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: rzv2h: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic. | ||||
| CVE-2026-98410 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: da9063: fix suspend/resume handling of HW_RUNNING watchdog da9063_wdt_suspend() and da9063_wdt_resume() only check watchdog_active(), when the watchdog is left running by the driver sets WDOG_HW_RUNNING in da9063_wdt_probe() but userspace never opens the device, so WDOG_ACTIVE remains cleared, the wdt_disable() will not be executed in da9063_wdt_suspend. In this case, the suspend callback is a no-op and the watchdog keeps counting during system suspend, leading to an unexpected system reset. Check WDOG_HW_RUNNING and wdd，can fix this issue. | ||||
| CVE-2026-109718 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-10-15 | 5.4 Medium |
| Use-after-free in the XML component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-98414 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memcg: avoid charging the root memcg from obj_cgroup_charge_pages() obj_cgroup_charge_pages() resolves the objcg to its memcg and calls try_charge_memcg(), which does not short circuit the root memcg. That memcg can be the root memcg: obj_cgroup_is_root() reflects the memcg the objcg was created for and is never updated, while memcg_reparent_objcgs() does redirect objcg->memcg to the parent on rmdir. An objcg of a dying child of root therefore passes every obj_cgroup_is_root() filter but resolves to the root memcg. Folios keep the objcg they were charged with, so this is easy to reach through zswap: allocate anon memory in a cgroup, move the task out, remove the cgroup, then write to the root cgroup's memory.reclaim. The reclaimed folios are charged through the reparented objcg and end up in refill_stock() with the root memcg: WARNING: mm/memcontrol.c:2198 at refill_stock+0x644/0x940 refill_stock+0x644/0x940 try_charge_memcg+0x12d6/0x1570 __obj_cgroup_charge+0x35/0xf0 obj_cgroup_charge+0x1de/0x210 obj_cgroup_charge_zswap+0x83/0x270 zswap_store+0x1620/0x2000 swap_writeout+0x94c/0x14c0 shrink_folio_list+0x3388/0x52b0 [...] try_to_free_mem_cgroup_pages+0x30d/0x830 user_proactive_reclaim+0x504/0x840 memory_reclaim+0x1f/0x30 Beyond the warning, the charge is asymmetric: obj_cgroup_uncharge_pages() skips refill_stock() for the root memcg, so the root's page counter grows and is never uncharged. It is not user visible, since memory.current is not exposed on the root, but it is a leak. Use try_charge(), which returns early for the root memcg, restoring the symmetry with obj_cgroup_uncharge_pages(). The above sequence was scripted into a standalone reproducer (zswap on, swap on a virtio disk, 512MB of anon memory faulted in inside a child of the root cgroup, the task then migrated to the root cgroup, the child removed, followed by "echo 600M swappiness=max > memory.reclaim" on the root) and run in a CONFIG_DEBUG_VM=y VM. It reproduces the splat on the first zswap store of a reparented folio, with the same call chain as the report. With this patch applied the splat is gone while the zswap store count over the run is unchanged, so the same path is still exercised. cgroup selftests test_zswap, test_kmem and test_memcontrol show no new failures. | ||||
| CVE-2026-98418 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched/core: Avoid false migration warning for proxy donors Proxy execution can move a blocked donor's scheduling context to the lock owner's CPU even when the donor is migration-disabled. The donor does not execute there, and its original execution CPU remains recorded in wake_cpu. set_task_cpu() warns unconditionally for migration-disabled tasks, so a subsequent proxy migration or the wakeup path returning the donor home triggers a false positive: moving a blocked scheduling context does not violate the migration-disabled execution context. For example, creating a mutex owner on CPU1 and a migration-disabled waiter on CPU0 can trigger the following warning: proxy_migrate_repro: donor blocking on CPU0 with migration disabled proxy_migrate_repro: donor moved from CPU0 to CPU1 WARNING: kernel/sched/core.c:3389 at set_task_cpu+0x1d3/0x280 ... Call Trace: try_to_wake_up+0x43f/0x780 __mutex_unlock_slowpath+0x330/0x540 owner_fn+0x9f/0xc0 [proxy_migrate_repro] ... proxy_migrate_repro: donor woke on CPU0, task_cpu=0 proxy_migrate_repro: completed Exclude blocked proxy donors from the warning. The proxy wakeup path restores an executable placement before clearing the blocked state. | ||||
| CVE-2026-98420 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: follow SMB2 session expiration semantics ksmbd_session_register() destroys valid sessions after ten seconds of inactivity whenever a client starts another SessionSetup exchange. This confuses Session.IdleTime with Session.ExpirationTime. Windows can create additional authenticated sessions on an existing connection, so deleting the older session invalidates its tree connects and makes mapped drives fail with STATUS_NETWORK_NAME_DELETED. The session expiration rules require the server to change a valid session to expired only after its credential expiration time passes. A valid or expired session otherwise keeps its connection from being scavenged. Connections that have not negotiated a dialect, have no sessions, or have only InProgress sessions are disconnected after an implementation-specific timeout. Use the Windows-compatible 45 second value and run the expiration check periodically for both TCP and SMB Direct. Keep zero as an infinite credential expiration time, and count each Valid-to-Expired transition. Set expired sessions to InProgress when they reauthenticate. If authentication fails, remove the session from the global and per-connection tables immediately, including SMB3 multichannel connections. Retain protection against abandoned SessionId-zero exchanges by allowing only one InProgress authentication per connection. Additional exchanges fail with STATUS_INSUFFICIENT_RESOURCES, and stale InProgress sessions are reaped after the same 45 second setup timeout. This bounds the original unauthenticated memory-exhaustion path without evicting established sessions. | ||||
| CVE-2026-98421 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: require a peer station for TDLS setup confirm It's nonsense for the setup confirm to go to station that doesn't even exist, and it hits a warning when building the frame: WARN_ON_ONCE(!sta || !ap_sta) Only accept WLAN_TDLS_SETUP_CONFIRM when the station is already there as a TDLS station. Need to copy the call to ieee80211_tdls_prep_mgmt_packet() since the existing WLAN_TDLS_DISCOVERY_REQUEST already falls through to it. | ||||
| CVE-2026-98425 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't warn when an IBSS has no channel to scan ieee80211_request_ibss_scan() warns when regulatory leaves no allowed channel, but that can happen as the regdomain can change while IBSS is operating, and it can continue to operate briefly during the 60s grace period until it's shut down. Just remove the warning in this case. | ||||
| CVE-2026-94451 | 1 Redhat | 2 Exploit Intelligence, Quarkus | 2026-10-15 | 6.5 Medium |
| Quarkus REST Data Panache provides a way to automatically generate REST endpoints for data entities. A flaw was found where certain endpoints do not properly check the sort parameter provided by users. This could allow an attacker to learn information they should not have access to or slow down the system by forcing the database to perform complex tasks, potentially causing a denial of service. | ||||
| CVE-2026-109394 | 1 Thirtybees | 1 Thirty Bees | 2026-10-15 | 7.4 High |
| Thirty bees through 1.7.0 contains an authentication bypass vulnerability in PasswordController::resolveCustomer() that allows unauthenticated attackers to reset registered customers' passwords using guest account tokens. Attackers can place a guest order with the victim's email, then use the guest secure key to reset and take over the victim's account when guest checkout is enabled. | ||||
| CVE-2026-109371 | 1 Zitadel | 1 Zitadel | 2026-10-15 | 8.2 High |
| ZITADEL 3.0.0 before 4.18.0 contains a missing authentication vulnerability in the hosted Login V1 UI, where the change-username handler acts on the account bound to a login flow before any factor is verified. Unauthenticated attackers can submit a victim's login name and then post a new username to rename any active human user, including administrators, locking them out. | ||||