Export limit exceeded: 409293 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 17357 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25326 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25326 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72487 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Check ROM header and data structure addr before accessing We meet a crash when running stress-ng on x86_64 machine: BUG: unable to handle page fault for address: ffa0000007f40000 RIP: 0010:pci_get_rom_size+0x52/0x220 Call Trace: <TASK> pci_map_rom+0x80/0x130 pci_read_rom+0x4b/0xe0 kernfs_file_read_iter+0x96/0x180 vfs_read+0x1b1/0x300 Our analysis reveals that the ROM space's start address is 0xffa0000007f30000, and size is 0x10000. Because of broken ROM space, before calling readl(pds), the pds's value is 0xffa0000007f3ffff, which is already pointed to the ROM space end, invoking readl() would read 4 bytes therefore cause an out-of-bounds access and trigger a crash. Fix this by adding image header and data structure checking. We also found another crash on arm64 machine: Unable to handle kernel paging request at virtual address ffff8000dd1393ff Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault The call trace is the same with x86_64, but the crash reason is that the data structure addr is not aligned with 4, and arm64 machine report "alignment fault". Fix this by adding alignment checking. [bhelgaas: shorten function names, wrap comments] | ||||
| CVE-2026-74323 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible token leak in mt7996_tx_prepare_skb() If link_conf or link_sta lookup fails in mt7996_tx_prepare_skb routine, mt7996 driver leaks an already allocated tx token. Fix the issue releasing the token in case of error. | ||||
| CVE-2026-74282 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: prevent snt_unacked underflow on CONN_ACK tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count from the unsigned 16-bit send counter snt_unacked without checking that it does not exceed the number of messages actually outstanding: tsk->snt_unacked -= msg_conn_ack(hdr); msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK message. If the ack count is larger than snt_unacked, the subtraction wraps to a near-maximum value, leaving tsk_conn_cong() permanently true and starving the connection of further transmits. Validate the ACK count at the start of the CONN_ACK block and drop the message if it acknowledges more messages than are outstanding. A peer (or, for a local connection, the connected peer socket) can otherwise wedge a TIPC connection's send side by sending an oversized connection ack. | ||||
| CVE-2026-74300 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci: validate codec capability element length Read Local Codec Capabilities returns a sequence of capability elements. Each element starts with a one-byte length followed by that many payload bytes. hci_read_codec_capabilities() checks that the skb contains the length byte, but then validates only caps->len against the remaining skb length. A malformed controller response with one remaining byte and caps->len set to one passes that check even though the element needs two bytes. The parser then records a two-byte capability and copies one byte beyond the advertised response payload into the codec list. Validate the full element size, including the length byte, before adding it to the accumulated capability length. This preserves all well-formed capability elements and drops only truncated controller responses. | ||||
| CVE-2026-74315 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file() file_hash() digests the first LOCKD_FH_HASH_SIZE bytes of nfs_fh.data when bucketing nlm_files[], independent of fh.size. Commit 3de744ee4e45 ("lockd: Use xdrgen XDR functions for the NLMv4 TEST procedure") set .pc_argzero to zero for the converted procedures and moved file-handle population into nlm4svc_lookup_file(), which copies only xdr_lock->fh.len bytes into lock->fh.data. When an NLMv4 client presents a file handle shorter than LOCKD_FH_HASH_SIZE, bytes fh.len..31 retain whatever the argument buffer held from an earlier request. The same wire handle then hashes to different buckets across calls; nlm_lookup_file() misses the existing nlm_file entry, and lock-state lookups fail. Zero only the tail bytes that file_hash() would otherwise consume. Handles of LOCKD_FH_HASH_SIZE or larger already populate every byte that file_hash() reads. | ||||
| CVE-2026-74321 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid pointer dereference in __btrfs_run_delayed_refs() In the beginning of the loop, we try to obtain a locked delayed ref head, if 'locked_ref' is currently NULL, by calling btrfs_select_ref_head(), which can return an error pointer. If the error pointer is -EAGAIN we do a continue and go back to the beginning of the loop, which will not try again to call btrfs_select_ref_head() since 'locked_ref' is no longer NULL but it's ERR_PTR(-EAGAIN), and then we do: spin_lock(&locked_ref->lock); against a ERR_PTR(-EAGAIN) value, generating an invalid pointer dereference. Fix this by ensuring that 'locked_ref' is set to NULL when btrfs_select_ref_head() returns ERR_PTR(-EAGAIN) and incrementing 'count' as well, to prevent infinite looping. We do this by doing a goto to the bottom of the loop that already sets 'locked_ref' to NULL and does a cond_resched(), with an increment to 'count' right before the goto. These measures were in place before the refactoring in commit 0110a4c43451 ("btrfs: refactor __btrfs_run_delayed_refs loop") but were unintentionally lost afterwards. | ||||
| CVE-2026-74545 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rtase: fix double free of multi-frag skb on DMA map failure In rtase_start_xmit(), when the head buffer DMA mapping fails after rtase_xmit_frags() has mapped all fragments, the error path clears the fragment descriptors with rtase_tx_clear_range(), which frees the skb through the last-frag slot and accounts tx_dropped. Control then falls through to the common error label, which frees the same skb a second time and counts it again. Return right after clearing the fragments when the skb owns frags; the no-frag case still drops through and frees the head skb once. | ||||
| CVE-2026-74377 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path For non-SRQ QPs, the responder reads WQE fields directly from the shared queue buffer mapped into userspace. This allows a malicious user to modify fields like num_sge or sge entries while the kernel is processing the WQE, leading to out-of-bounds reads in rxe_resp_check_length() and copy_data(). Introduce get_recv_wqe() that validates num_sge and copies the WQE to a kernel-local buffer before processing, matching the approach already used for SRQ WQEs in get_srq_wqe(). The srq_wqe buffer is reused since SRQ and non-SRQ paths are mutually exclusive per QP. | ||||
| CVE-2026-74387 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: midi: Serialize output teardown with event_input event_process_midi() borrows msynth->output_rfile.output and then passes the substream to dump_midi() and snd_rawmidi_kernel_write() without synchronizing with the output open/close transition. midisynth_use() also publishes output_rfile before snd_rawmidi_output_params() has finished. The last midisynth_unuse() can therefore release the same rawmidi file and free substream->runtime before snd_rawmidi_kernel_write1() takes its runtime buffer reference. That leaves the event_input path using a stale substream or runtime and can end in a NULL-deref or use-after-free. Fix this with two pieces of synchronization. Keep a short IRQ-safe spinlock only for publishing or clearing output_rfile and for pairing the output snapshot with an snd_use_lock_t reference. Once event_process_midi() has taken that in-flight reference, it drops the spinlock before calling snd_seq_dump_var_event(), dump_midi(), or snd_rawmidi_kernel_write(). midisynth_unuse() now detaches the visible rawmidi file under the same spinlock, waits for the in-flight writers to drain, and only then drains and releases the saved file. midisynth_use() likewise opens into a local snd_rawmidi_file and publishes it only after snd_rawmidi_output_params() succeeds. The buggy scenario involves two paths, with each column showing the order within that path: event_input path: last unuse path: 1. event_process_midi() snapshots 1. midisynth_unuse() starts output_rfile.output. tearing down output_rfile. 2. dump_midi() reaches 2. snd_rawmidi_kernel_release() snd_rawmidi_kernel_write() closes the output file. before runtime is pinned. 3. close_substream() frees 3. The callback keeps using substream->runtime. the borrowed substream. Validation reproduced this kernel report: KASAN null-ptr-deref in snd_rawmidi_kernel_write1+0x56/0x360 RIP: 0033:0x7fde7dd0837f RIP: 0010:snd_rawmidi_kernel_write1+0x56/0x360 | ||||
| CVE-2026-74435 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: rxrpc_verify_data ensure rx_dec_buffer alloc rxrpc_recvmsg_data() calls rxrpc_verify_data() whenever the rxrpc_call.rx_dec_buffer is unallocated and assumes that upon successful return that rx_dec_buffer must be allocated. However, rxrpc_verify_data() does not request an allocation if the rxrpc_skb_priv.len is zero. In addition, failure to allocate rx_dec_buffer will result in a call to skb_copy_bits() with a NULL destination which can trigger a NULL pointer dereference. To prevent these issues rxrpc_verify_data() is modified to always attempt to allocate the rxrpc_call.rx_dec_buffer if it is NULL. This issue was identified with assistance of a private sashiko instance. | ||||
| CVE-2026-74531 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: hold conn reference in abort_conn_sync() There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. | ||||
| CVE-2026-74538 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: lock sk in iso_connect_ind Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the "ev3" part of iso_connect_ind. It may also be NULL if socket has transitioned away from the LISTEN/CONNECT states before locking. Fix by adding lock/release. Recheck hcon is valid after lock acquire where needed. | ||||
| CVE-2026-74262 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: kcm: use WRITE_ONCE() when changing lower socket callbacks kcm_attach() replaces a live lower TCP socket's sk_data_ready and sk_write_space callbacks with KCM handlers, and kcm_unattach() restores them later. Those callback-pointer updates are still plain stores even though the same fields can be read and invoked concurrently on other CPUs. If another CPU observes an older callback snapshot after the live field has already been restored, callback execution can run with a mismatched target and sk_user_data state, leading to stale or misdirected wakeups. Use WRITE_ONCE() for the callback replacement and restore operations so these shared callback fields follow the same visibility contract already established by the earlier 4022 fixes. | ||||
| CVE-2026-74403 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Check for page allocation failure correctly in TIO Sashiko notes: > if __snp_alloc_firmware_pages() returns NULL under memory pressure, is it > safe to pass it directly to page_address()? > > On architectures without HASHED_PAGE_VIRTUAL, page_address(NULL) might > compute a deterministic but invalid, non-zero virtual address. The > subsequent if (tio_status) check would then evaluate to true, and > sev_tsm_init_locked() would dereference the invalid pointer. Indeed, page_address(NULL) will return non-NULL garbage here. Fix this by checking the page allocation itself for NULL, not the resulting virtual address. | ||||
| CVE-2026-74433 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix UAF in rxgk_issue_challenge() Fix rxgk_issue_challenge() to free the page containing the challenge content after invoking the tracepoint as the whdr passed to the tracepoint points into the page just freed. | ||||
| CVE-2026-74434 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Don't move a peeked OOB message onto the pending queue rxrpc_recvmsg_oob() takes a received oob message off recvmsg_oobq and, if a response is needed, moves it onto the pending_oobq tree. However, only the unlink from recvmsg_oobq is guarded by MSG_PEEK; the move onto pending_oobq always runs. As a result, reading a challenge with MSG_PEEK leaves the skb on recvmsg_oobq while also adding it to pending_oobq. Since struct sk_buff's rbnode shares storage with its next and prev pointers, rb_insert_color() overwrites the list linkage, and the skb, which holds a single reference, becomes reachable from both queues at once. When the socket is closed both queues are drained in turn. While draining recvmsg_oobq, __skb_unlink() follows the next and prev pointers that rbnode has overwritten and writes to a bad address. Also, as the skb holds a single reference but is freed from each queue, both the skb and the connection reference it holds are released twice. This leads to memory corruption and to a use-after-free caused by the connection refcount underflow. MSG_PEEK does not consume the message from the queue, so only unlink it from recvmsg_oobq and then move it onto pending_oobq or free it when the message is actually consumed. | ||||
| CVE-2026-74489 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix tid_tx use-after-free on BA session stop ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping sta->lock: ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */ ... spin_unlock_bh(&sta->lock); if (start_txq) ieee80211_agg_start_txq(sta, tid, false); if (send_delba) ieee80211_send_delba(..., tid_tx->ndp); That read is not covered by an RCU read-side critical section, and it runs in preemptible process context: both callers hold the wiphy mutex, reaching it either from the ieee80211_ba_session_work() wiphy work or from ieee80211_sta_tear_down_BA_sessions() during station teardown. Softirqs can run in that window too, both from the local_bh_enable() that ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU callback can free tid_tx before the read. Driving the function from a test module with the grace period forced into that window, KASAN reports the read, and the free arrives on the ordinary RCU softirq path: BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400 Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10 [...] Freed by task 57: __kasan_slab_free+0x47/0x70 __rcu_free_sheaf_prepare+0x70/0x250 rcu_free_sheaf_nobarn+0x18/0x40 rcu_core+0x426/0x1310 handle_softirqs+0x144/0x590 __irq_exit_rcu+0xea/0x150 irq_exit_rcu+0x9/0x20 sysvec_apic_timer_interrupt+0x6b/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 send_delba is only set when tx_stop is set, which happens for AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown - session idle timeout, PTK rekey, suspend, HW reconfig - and not from a peer's DELBA. Read ndp into a local before the session is freed, while sta->lock is still held. tid_tx->ndp has a single writer, in ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here: both paths are serialised by the wiphy mutex, and the session is already marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only tid_tx dereference left after ieee80211_remove_tid_tx() in this function. [move/change the comment a bit to be more general not just on ndp, initialize ndp directly] | ||||
| CVE-2023-6931 | 3 Debian, Linux, Redhat | 6 Debian Linux, Linux Kernel, Enterprise Linux and 3 more | 2026-08-17 | 7.8 High |
| A heap out-of-bounds write vulnerability in the Linux kernel's Performance Events system component can be exploited to achieve local privilege escalation. A perf_event's read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group(). We recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b. | ||||
| CVE-2025-36431 | 3 Ibm, Linux, Microsoft | 5 Aix, Sterling B2b Integrator, Sterling File Gateway and 2 more | 2026-08-17 | 5.4 Medium |
| IBM Sterling B2B Integrator 6.2.2.0 through 6.2.2.0_1 and IBM Sterling File Gateway 6.2.2.0 through 6.2.2.0_1 is vulnerable to cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | ||||
| CVE-2026-74311 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio: rtc: tear down old virtqueues before restore virtio_device_restore() resets the device and restores the negotiated features before calling ->restore(). viortc_freeze() intentionally leaves the existing virtqueues in place so the alarm queue can still wake the system, but viortc_restore() immediately calls viortc_init_vqs() without first deleting those old queues. If virtqueue reinitialization fails on virtio-pci, the transport error path can run vp_del_vqs() against a newly allocated vp_dev->vqs array while vdev->vqs still contains the old virtqueues. vp_del_vqs() then looks up queue state through the new array and can dereference a NULL info pointer in vp_del_vq(), crashing the guest kernel during restore. This can also happen during a non-faulty reinitialization, when one of the vp_find_vqs_msix() attempts is unsuccessful before a later attempt would succeed. Delete the stale virtqueues before rebuilding them. If restore fails before virtio_device_ready(), reuse the remove path to stop the device. Once the device is ready, return errors directly instead of deleting the virtqueues again. | ||||