Export limit exceeded: 10103 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10103 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-65953 | 1 Emqx | 1 Nanomq | 2026-04-15 | N/A |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. Prior to version 0.22.5, a Heap-Use-After-Free (UAF) vulnerability exists in the TCP transport component of NanoMQ, which relies on the underlying NanoNNG library (specifically in src/sp/transport/mqtt/broker_tcp.c). The vulnerability is due to improper resource management and premature cleanup of message and pipe structures under specific malformed MQTTV5 retain message traffic conditions. This issue has been patched in version 0.22.5. | ||||
| CVE-2025-0031 | 1 Amd | 9 Epyc 7003 Series Processors, Epyc 8004 Series Processors, Epyc 9004 Series Processors and 6 more | 2026-04-15 | N/A |
| A use after free in the SEV firmware could allow a malicous hypervisor to activate a migrated guest with the SINGLE_SOCKET policy on a different socket than the migration agent potentially resulting in loss of integrity. | ||||
| CVE-2025-31498 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2026-04-15 | 7.0 High |
| c-ares is an asynchronous resolver library. From 1.32.3 through 1.34.4, there is a use-after-free in read_answers() when process_answer() may re-enqueue a query either due to a DNS Cookie Failure or when the upstream server does not properly support EDNS, or possibly on TCP queries if the remote closed the connection immediately after a response. If there was an issue trying to put that new transaction on the wire, it would close the connection handle, but read_answers() was still expecting the connection handle to be available to possibly dequeue other responses. In theory a remote attacker might be able to trigger this by flooding the target with ICMP UNREACHABLE packets if they also control the upstream nameserver and can return a result with one of those conditions, this has been untested. Otherwise only a local attacker might be able to change system behavior to make send()/write() return a failure condition. This vulnerability is fixed in 1.34.5. | ||||
| CVE-2011-10034 | 1 Irai | 1 Automgen | 2026-04-15 | N/A |
| AUTOMGEN versions up to and including 8.0.0.7 (also referenced as 8.022) contain a vulnerability in that project file handling frees an object and subsequently dereferences the stale pointer when processing certain malformed fields. The dangling-pointer use enables an attacker to influence an indirect call through attacker-controlled memory, resulting in denial-of-service. In some conditions, remote code execution may be possible. | ||||
| CVE-2025-1706 | 2026-04-15 | 7.5 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||
| CVE-2025-50518 | 1 Libcoap | 1 Libcoap | 2026-04-15 | 9.8 Critical |
| A use-after-free vulnerability exists in the coap_delete_pdu_lkd function within coap_pdu.c of the libcoap library. This issue occurs due to improper handling of memory after the freeing of a PDU object, leading to potential memory corruption or the possibility of executing arbitrary code. NOTE: this is disputed by the Supplier because it only occurs when an application uses libcoap incorrectly. | ||||
| CVE-2025-14569 | 1 Ggml | 1 Whisper.cpp | 2026-04-15 | 5.3 Medium |
| A vulnerability was detected in ggml-org whisper.cpp up to 1.8.2. Affected is the function read_audio_data of the file /whisper.cpp/examples/common-whisper.cpp. The manipulation results in use after free. The attack requires a local approach. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2025-9020 | 1 Dronecode | 1 Px4 Drone Autopilot | 2026-04-15 | 4.5 Medium |
| A vulnerability was found in PX4 PX4-Autopilot up to 1.15.4. This issue affects the function MavlinkReceiver::handle_message_serial_control of the file src/modules/mavlink/mavlink_receiver.cpp of the component Mavlink Shell Closing Handler. The manipulation of the argument _mavlink_shell leads to use after free. An attack has to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The identifier of the patch is 4395d4f00c49b888f030f5b43e2a779f1fa78708. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2025-23281 | 1 Nvidia | 1 Gpu Display Driver | 2026-04-15 | 7 High |
| NVIDIA GPU Display Driver for Windows contains a vulnerability where an attacker with local unprivileged access that can win a race condition might be able to trigger a use-after-free error. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, or information disclosure. | ||||
| CVE-2025-23280 | 2 Linux, Nvidia | 2 Linux, Display Driver | 2026-04-15 | 7 High |
| NVIDIA Display Driver for Linux contains a vulnerability where an attacker could cause a use-after-free. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure. | ||||
| CVE-2024-12837 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to corrupt kernel heap memory. | ||||
| CVE-2025-0835 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to corrupt kernel heap memory. | ||||
| CVE-2024-40885 | 1 Intel | 1 M20ntp Firmware | 2026-04-15 | 7.5 High |
| Use after free in the UEFI firmware of some Intel(R) Server M20NTP BIOS may allow a privileged user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-36854 | 1 Microsoft | 1 .net | 2026-04-15 | 8.1 High |
| A vulnerability ( CVE-2024-38229 https://www.cve.org/CVERecord ) exists in EOL ASP.NET when closing an HTTP/3 stream while application code is writing to the response body, a race condition may lead to use-after-free, resulting in Remote Code Execution. Per CWE-416: Use After Free https://cwe.mitre.org/data/definitions/416.html , Use After Free is when a product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer. This issue affects EOL ASP.NET 6.0.0 <= 6.0.36 as represented in this CVE, as well as 8.0.0 <= 8.0.8, 9.0.0-preview.1.24081.5 <= 9.0.0.RC.1 as represented in CVE-2024-38229 https://www.cve.org/CVERecord . Additionally, if you've deployed self-contained applications https://docs.microsoft.com/dotnet/core/deploying/#self-contained-deployments-scd targeting any of the impacted versions, these applications are also vulnerable and must be recompiled and redeployed. NOTE: This CVE only represents End Of Life (EOL) software components. The vendor, Microsoft, has indicated there will be no future updates nor support provided upon inquiry. | ||||
| CVE-2024-4741 | 2 Openssl, Redhat | 2 Openssl, Enterprise Linux | 2026-04-15 | 7.5 High |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSL_free_buffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications. The SSL_free_buffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use. The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSL_free_buffers will succeed even though a record has only been partially processed and the buffer is still in use. The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSL_free_buffers will succeed even though the buffer is still in use. While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. | ||||
| CVE-2024-9979 | 1 Redhat | 2 Ansible Automation Platform, Enterprise Linux | 2026-04-15 | 5.3 Medium |
| A flaw was found in PyO3. This vulnerability causes a use-after-free issue, potentially leading to memory corruption or crashes via unsound borrowing from weak Python references. | ||||
| CVE-2025-27578 | 2026-04-15 | 7.5 High | ||
| Pixmeo OsiriX MD is vulnerable to a use after free scenario, which could allow an attacker to upload a crafted DICOM file and cause memory corruption leading to a denial-of-service condition. | ||||
| CVE-2025-1884 | 2026-04-15 | 7.8 High | ||
| Use-After-Free vulnerability exists in the SLDPRT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted SLDPRT file. | ||||
| CVE-2024-38920 | 1 Open Robotics | 2 Nav2 Humble, Ros2 | 2026-04-15 | 9.1 Critical |
| Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a use-after-free via the nav2_amcl process. This vulnerability is triggerd via remotely sending a request for change the value of dynamic-parameter`/amcl max_beams` . | ||||
| CVE-2023-49676 | 2026-04-15 | 5.5 Medium | ||
| An unauthenticated local attacker may trick a user to open corrupted project files to crash the system due to use after free vulnerability. | ||||