| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the eXtensible ARchive (XAR) GZIP file parser for ClamAV could allow an unauthenticated, remote attacker to exceed the configured MaxFileSize and cause a DoS condition on an affected device.
This vulnerability is due to inefficiencies when parsing specifically formatted files with the XAR GZIP file parser. An attacker could exploit this vulnerability by by sending a crafted XAR GZIP file to be scanned. A successful exploit could allow the attacker to effectively cause the ClamAV to exceed the MaxFileSize and potentially get caught in an infinite loop, causing a DoS condition. |
| GPAC MP4Box through 26.07.0 contains a type confusion vulnerability in xmt_parse_command() in src/scene_manager/loader_xmt.c that casts target nodes to GF_ParentNode without validation. Attackers can persuade users to process a crafted XMT-A file whose command targets a non-grouping node, causing gf_node_list_get_child() to perform an invalid memory read and crash MP4Box. |
| GPAC MP4Box through 26.07.0 contains a type confusion vulnerability in gf_sg_command_apply() in src/scenegraph/commands.c that misinterprets single node values as child lists for MFNode field replace commands. Attackers can supply a crafted XMT scene that causes an invalid node pointer to be dereferenced by gf_node_register(), crashing MP4Box for denial of service. |
| GPAC MP4Box through 26.07.0 contains a type confusion vulnerability in ctxload_process() in src/filters/load_bt_xmt.c that casts object descriptor update entries without checking the descriptor tag. Attackers can supply a crafted XMT/BT scene placing a different descriptor type in a GF_ODUpdate command, causing gf_list_get() to dereference an invalid pointer and crash MP4Box. |
| GPAC MP4Box through 26.07.0 contains a type confusion vulnerability in src/compositor/mpeg4_text.c that allows heap out-of-bounds reads by casting a Text node's fontStyle field to M_FontStyle unchecked. Attackers can craft an XMT/BIFS scene placing a smaller node like Face in fontStyle, causing build_text to read past the allocation and crash MP4Box. |
| GPAC MP4Box through 26.07.0 contains a type confusion vulnerability in curve2d_check_changes() that casts a Curve2D point field node to M_Coordinate2D without type checking. Attackers can supply a crafted XMT/BIFS scene placing another node type such as LinearGradient in that field, causing an invalid pointer read that crashes the process. |
| A flaw was found in Keycloak. An authenticated remote user with a pending required security action, such as configuring multi-factor authentication (MFA), can bypass the mandatory action by submitting a specially crafted request to the consent endpoint without a valid session code. Keycloak incorrectly interprets the submission as a page refresh and completes the authentication process, allowing the user to access the application without fulfilling the required security policies. |
| In Eclipse iceoryx-rs, versions 0.0.11 to 0.0.13 and 0.1.0 as well as on the latest main branch.
`SampleReceiver::<T>::take()` and `Sample::<T>::deref()` are safe functions that hand the caller a `&T` pointing at a chunk written by another iceoryx process, but the subscriber path neither requires `T: ShmSend` nor verifies that the received chunk is at least `size_of::<T>()` bytes / `align_of::<T>()`-aligned. A peer process that publishes an undersized chunk, or any chunk at all when the subscriber chose a pointer-bearing `T`, drives a `#![forbid(unsafe_code)]` subscriber into out-of-bounds reads of adjacent shared-memory chunks or dereference of a publisher-controlled pointer.
Resolution:
It will not be fixed since this is a known limitation in iceoryx as it is the users responsibility to specify the same data type on sender and receiver side.
[iceoryx2](https://github.com/eclipse-iceoryx/iceoryx2) is the successor of iceoryx-rs where the API is designed to prevent this by default.
It is strongly recommended to migrate to iceoryx2 which is actively maintained and receives security support.
The iceoryx-rs package has officially reached End-of-life and will not receive any features, bugfixes or security fixes. |
| When message history is serialized and loaded again, a tool result that contains a JSON object in the serialized shape of one of Pydantic AI's file types is rebuilt as that file. A third party who controls data a tool returns, such as a record that an MCP server or a function tool returns from an external system, can use this to make the application download a URL on its local network, or make the model provider read an s3:// object or uploaded file with the application's credentials. Applications are affected when tool results can contain third-party data, message history containing those results is serialized and loaded again (stored history, history a UI adapter holds on the server, or Temporal, DBOS or Prefect durable execution), and the model is one Pydantic AI downloads files for, one that honors force_download, or one whose provider resolves non-HTTP file URLs or uploaded files. History that a client submits through the Vercel AI or AG-UI adapter in the default mode is not affected. The issue is fixed in pydantic-ai and pydantic-ai-slim 1.107.10 and 2.66.0. |
| PROFINET protocol dissector crash in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 allows denial of service |
| USB-PTP protocol dissector crash in 4.6.0 to 4.6.9 allows denial of service |
| Multiple protocol dissector crashes in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 allows denial of service |
| Netatalk is a Free and Open Source file server suite for Unix-like operating systems. From 3.1.0 until 4.5.2, sl_createCNIDArray in etc/afpd/spotlight.c assumes every element of kMDQueryItemArray points to an eight-byte uint64_t and copies sizeof(uint64_t) bytes from the indexed p->dd_talloc_array element without validating the element's talloc type or allocation size. An authenticated AFP client with access to a Spotlight-enabled volume can use FPSpotlightRPC to supply a mixed-type sl_array_t containing a shorter boolean, nil, or string element, and an unauthenticated client can reach the same path when the optional guest UAM and a guest-accessible volume are enabled. The resulting eight-byte read extends beyond the shorter element's heap allocation and supplies an internal CNID filter; no confidentiality channel, write primitive, or code execution was demonstrated, while a production crash would require additional heap placement conditions. The container-type validation added for CVE-2023-42464 does not validate each element inside an accepted sl_array_t and therefore does not resolve this issue. This issue is fixed in version 4.5.2. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Reject signalling responses in invalid states
A peer can send configuration messages while an
incoming channel is in BT_CONNECT2, before the
security or deferred accept gate has completed. A
configuration response can then promote the channel
to BT_CONNECTED. Configuration responses can also
act on channels that are closing, and a late connection
response can move a disconnecting channel back to
BT_CONFIG.
Accept connection responses only while waiting in
BT_CONNECT. Answer configuration requests in
BT_CONNECT2, but defer our own request until
BT_CONFIG so configuration cannot complete before
the gate. Ignore configuration responses outside
BT_CONFIG and BT_CONNECTED, and only complete
configuration in BT_CONFIG. |
| Mongoose Embedded Web Server / Networking Library before 7.24 contains a WebSocket fragmentation validation vulnerability that allows remote attackers to spoof message metadata by sending a single CONTINUATION frame with FIN=1 as the first data frame instead of a required TEXT/BINARY start frame, violating RFC 6455 sequencing rules. Attackers can craft this malformed frame to make mg_ws_cb() in src/ws.c misinterpret the first byte of payload as saved FIN/opcode flags, causing the application to receive a dispatched MG_EV_WS_MSG event with attacker-controlled flags and data truncated by one byte without closing the connection. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Only accept connection responses to outstanding requests
An outgoing channel waits in BT_CONNECT until security
and the feature mask exchange complete, and only then
sends its connection request. A peer can answer it
before that with a connection response matching our
source CID. The channel then moves to BT_CONFIG,
completes configuration and becomes connected before
security has completed. If security then fails,
l2cap_security_cfm() leaves the connected channel
alone, so it stays up on a link that did not reach
the required security level.
A connection response with a zero source CID is
matched by identifier. Another channel can hold the
same identifier for a response it still has to send,
so the lookup can pick the wrong channel.
Only accept a connection response while our request
is outstanding, and only look at such channels when
matching by identifier. |
| Quasar before 2.35.3 contains a DOM clobbering vulnerability that allows attackers to break native wrapper detection by injecting HTML elements named Capacitor, cordova, or StatusBar. Attackers can place markup such as a div with id Capacitor into server-rendered or pre-rendered HTML so app.use(Quasar) throws and the application never mounts, or openURL() and AddressbarColor.set() throw. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: handle device-exclusive entries in folio_referenced_one()
page_vma_mapped_walk() can return non-present device-exclusive entries,
but folio_referenced_one() passes them to PTE young-bit accessors that
require present PTEs.
We must neither call clear_flush_young_ptes_notify() nor
folio_pte_batch() with non-present entries. For example, clearing the
young bit on non-present PTEs can corrupt the entry: on arm64
PTE_AF overlaps the swap type, so clearing it turns a device-exclusive
entry into an ordinary swap entry.
folio_pte_batch() will VM_WARN_ON_FOLIO.
Apply the same approach as the previous fixes to e.g., damon_ptep_mkold():
treat these entries as old from the CPU's perspective and obtain their
young state through the MMU notifier.
Skip PTE batching and MGLRU look-around for non-present entries, and
don't modify non-present PTEs. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: make shmem_file() check the file's inode
shmem_file() only checks if file->f_mapping is a shmem mapping. This
mapping can belong to another file, however, as with a Coda file backed
by a tmpfs container after mmap().
So it does not guarantee that the file inode is an actual shmem inode.
Seal handling and memfd preservation use this check before accessing
shmem inode state, so they can access an inode of the wrong type.
Let's make shmem_file() check the inode's file operations instead, to
identify shmem inodes reliably. This will identify regular shmem inodes,
including memfds and ordinary tmpfs files, independently of wrapper file
operations.
Use shmem_mapping() in collapse_file() instead to not change the behavior
of collapse_file(): it operates on the page cache and uses mapping->host
for shmem inode operations. Focusing on the file does not seem relevant. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: remove bogus context initialization in alloc_requests
alloc_requests() initializes usb9pfs->in_req->context to point at the
struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites
this with the real struct p9_req_t pointer before every transmit, and
usb9pfs_tx_complete() clears it back to NULL after each completion, so
in_req->context only ever holds a valid p9_req_t once a request has
actually been queued.
usb9pfs_clear_tx(), however, can run at any time (mount close, gadget
disable) independent of whether a request was ever queued. If it runs
before the first usb9pfs_transmit(), it reads the leftover sentinel
value, type-confuses the struct f_usb9pfs pointer as a struct
p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and
hands it to p9_client_cb(), which manipulates req->wq and req->refcount
at bogus offsets inside f_usb9pfs. This reliably corrupts memory or
panics whenever the transport is torn down before any 9p request has
been transmitted, e.g. mounting and immediately unmounting, or a cable
disconnect racing the very first request.
usb9pfs->out_req->context is set the same way but is never read by
this transport (usb9pfs_rx_complete() identifies the instance via
ep->driver_data instead), so it serves no purpose either.
Both endpoints' ->driver_data are already set to usb9pfs in
enable_endpoint(), which is what the completion handlers actually use
to recover the f_usb9pfs instance. Just drop the leftover
->context assignments; usb_ep_alloc_request()/alloc_ep_req() already
return zeroed requests, so in_req->context correctly starts out NULL. |