| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/bpf-ops: clear bpf_ctx while submitting SQEs
bpf_io_uring_submit_sqes() calls io_submit_sqes() from inside the loop
program, with current->bpf_ctx set, and requests issued inline run with
it set too. The socket code uses has_current_bpf_ctx() to recognize
calls from bpf_setsockopt() and friends, where the caller holds the
socket lock and has already been vetted, and skips both.
So a SOCKET_URING_OP_SETSOCKOPT from the SQ passes sockopt_capable()
without the capability, and runs without lock_sock(). A task with no
capability can set SO_MARK, IP_TRANSPARENT or TCP_REPAIR, and two
threads changing IP_OPTIONS on one socket, one through the ring, double
free in no time. SOCK_DESTROY via IORING_OP_SENDMSG ends up in
tcp_abort() without the lock the same way.
Clear the run context around io_submit_sqes(). The SQEs come from
userspace and must be issued like those of any other ring. They still
run inside the program's RCU tasks trace read section, so a request
that sleeps there holds up that grace period, but other request types
do that already. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: revert fsids on durable reconnect and replay failure
On a durable handle reconnect or a request replay, smb2_open() switches
to the SMB user's fsids before calling ksmbd_vfs_getattr(). If that call
fails, the code jumps to err_out2 and skips ksmbd_revert_fsids() at
err_out1. The user's credentials then stay installed on the shared ksmbd
worker. Later work on that worker, including other users' requests, runs
with the first user's fsuid, fsgid and supplementary groups.
ksmbd_free_work_struct() also warns, because work->saved_cred is still
set.
Jump to err_out1 instead. No path is held at this point, so skipping the
path_put() at err_out is correct. |
| Incorrect Authorization vulnerability in Apache Tomcat could occur during a request dispatch if the request depended on a security-role-ref provided by the dispatch target.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.27, from 10.1.0-M1 through 10.1.61, from 9.0.0.M1 through 9.0.123.
The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.29, 10.1.62 or 9.0.124, which fixes the issue.
Note: Tomcat 11.0.28 was not released |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Map flex file layout IDs through the request's user namespace
nfsd4_ff_proc_layoutget() and nfsd4_ff_encode_layoutget() translate
the file's owner and group with init_user_ns, but every other identity
nfsd places on the wire goes through nfsd_user_namespace(). When the
transport carries a credential from a non-initial user namespace, the
flex file layout reports host-global IDs. The client copies those IDs
into the AUTH_SYS credential it presents to the data server, and
svcauth_unix_accept() resolves that credential in the transport's
namespace, so data server I/O runs under an identity unrelated to the
file's owner.
Switching to the request's namespace introduces a second hazard.
from_kuid() returns (uid_t)-1 when the target namespace has no
mapping for the owner, and the IOMODE_READ arm adds one to that
result to derive an identity for which the data server denies
writes. The addition would wrap to zero, handing the client uid 0
instead of an identity distinct from the owner.
Translate both IDs in nfsd4_ff_proc_layoutget(), which has the
svc_rqst, and carry the wire values in struct pnfs_ff_layout.
from_kuid_munged() substitutes overflowuid for an unmapped owner and
thus never returns (uid_t)-1, so the increment cannot wrap to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require DELETE access for delete-on-close opens
smb2_open() accepts FILE_DELETE_ON_CLOSE on an existing file without
DELETE in DesiredAccess. When the request asks only for
FILE_READ_ATTRIBUTES or READ_CONTROL, it also skips inode_permission()
and the parent directory MAY_WRITE | MAY_EXEC check that delete-on-close
is meant to get. The file is then marked for deletion by a caller who
could not delete it.
The unlink happens later, in __ksmbd_inode_close(), when the last handle
on the inode is closed, and it runs with the credentials of that handle.
If the caller closes last, the unlink fails. If another user who can
write the parent directory, such as the file's owner, still has the file
open, the file is deleted when that user closes it. Until then new opens
of the file fail with STATUS_DELETE_PENDING. So a user with only search
permission on a directory can delete a file in it, or block opens of it,
while the owner has it open.
A MAXIMUM_ALLOWED open that also requests DELETE has the same problem.
The requested access is replaced with the maximal access, which does not
include DELETE when the caller cannot write the parent directory, and the
later permission checks are skipped as already done.
MS-FSA 2.1.5.1 requires an open with FILE_DELETE_ON_CLOSE and without
DELETE in DesiredAccess to fail with STATUS_INVALID_PARAMETER, and Samba
does the same. Add that check to the CreateOptions validation, using
the generic-mapped DesiredAccess so that GENERIC_ALL still qualifies.
This also refuses MAXIMUM_ALLOWED with FILE_DELETE_ON_CLOSE but no
explicit DELETE, as MS-FSA and Samba do. When MAXIMUM_ALLOWED is
requested with DELETE but the maximal access does not include DELETE,
fail with STATUS_ACCESS_DENIED. With DELETE requested, delete-on-close
opens go through the existing parent directory check. |
| Privilege escalation in the DOM: Navigation component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted
Use the MSR permission bitmap of the active VMCB instead of assuming that
KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02
if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM
needs to merge msprm01 with msrpm12.
Don't bother tracking the virtual address of the bitmap that's being used,
as __va() is cheap on x86, and caching the virtual address would introduce
yet another source of potentially stale information. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for delete-on-close
Delete-on-close can be completed by deferred or durable handle teardown,
where no request work is available. Both the base-file unlink and the ADS
xattr removal consequently run with the ksmbd worker credentials and can
bypass filesystem permission checks.
Run both operations with the credentials captured in struct file when the
handle was opened. This preserves the authenticated user's fsuid, fsgid,
supplementary groups and capability restrictions at final close. |
| Privilege escalation in the DOM: Navigation component. This vulnerability was fixed in Firefox 159 and Thunderbird 159. |
| goose from 1.28.0 before 1.44.0 contains an authorization bypass vulnerability that allows tools to run without user approval in Manual Approval mode because persisted read-only annotations are never cleared by update_goose_mode. After a session uses Smart Approval mode, prompt-injected calls to tools annotated readOnlyHint: true execute without prompting, bypassing the user's selected approval mode in PermissionInspector::inspect. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified
Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the
runtime eVMCS controls (pin, primary, secondary, etc.) are being updated.
If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and
then runs the same L2 with TPR virtualization disabled, KVM will fail to
refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR
virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or
L1 by proxy) read and write L0's TPR. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink
vti6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip6_tunnel: require CAP_NET_ADMIN in the device netns for changelink
ip6_tnl_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ip6_tnl_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare()
KUAP means kernel cannot touch user memory unless it explicitly is
enabled. In the kernel it should stay AMR_KUAP_BLOCKED. While returning
to userspace just before RFI, kernel should restore the user AMR value
back.
Looks like GENERIC_ENTRY might be treating arch_exit_to_user_mode_prepare()
as the last architecture step before returning to userspace.
commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature")
therefore called kuap_user_restore() from that hook. But on PowerPC that
is too early. After irqentry_exit() / syscall_exit_to_user_mode() we
still run platform specific exit routines.
e.g. code snippets showing both exception handling and system call
handling as the callers of function arch_exit_to_user_mode_prepare()
which does kuap_user_restore(). The below path shows that calling
kuap_user_restore() is too early when called from
arch_exit_to_user_mode_prepare().
Exception handling in exceptions-64s.S
=======================================
bl CFUNC(do_page_fault)
..DEFINE_INTERRUPT_HANDLER_ASYNC(do_page_fault)
arch_interrupt_async_enter_prepare(regs);
state = irqentry_enter(regs);
instrumentation_begin();
irq_enter_rcu();
handler(regs);
nap_adjust_return(regs);
irq_exit_rcu();
instrumentation_end();
arch_interrupt_async_exit_prepare(regs);
irqentry_exit(regs, state); <<< too early
irqentry_exit_to_user_mode()
__exit_to_user_mode_prepare(regs, EXIT_TO_USER_MODE_WORK_IRQ);
arch_exit_to_user_mode_prepare(regs, ti_work); <<< too early
b interrupt_return_srr
.. bl CFUNC(interrupt_exit_user_prepare) <<< already calls kuap_user_restore
prep_irq_for_enabled_exit() retry can run kernel code with IRQs on. So
only when that routine is fully finished is when the user KUAP should be
fully restored which interrupt_exit_user_prepare() already takes care of
before returning.
Similarly for system call handling in interrupt_64.S
======================================================
bl CFUNC(system_call_exception)
.Lsyscall_exit:
addi r4,r1,STACK_INT_FRAME_REGS
li r5,0 /* !scv */
bl CFUNC(syscall_exit_prepare)
.. kuap_assert_locked();
syscall_exit_to_user_mode(regs); <<< too early
syscall_exit_to_user_mode_prepare(regs); <<< too early
kuap_user_restore(regs); <<< already calls
syscall_exit_prepare(), which can enable IRQs, replay a pending
interrupt, and only then rfi. Those functions already restore KUAP
immediately before rfi.
Note that if we restore the user AMR too early like in the current code
as shown from the code snippets above, then we get the following warning
when CONFIG_PPC_KUAP_DEBUG is enabled:
WARNING: arch/powerpc/include/asm/book3s/64/kup.h:293 at interrupt_exit_user_prepare+0x1a0/0x1c0
Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected)
TRAP: 0700
LR: c00000000000d8d4 CTR: c0000000021fe500
MSR: <SF,EE,ME,IR,DR,RI,LE> CR: 44000804 XER: 20040000
interrupt_exit_user_prepare+0x1a0/0x1c0
interrupt_return_srr_user+0x8/0x12c |
| Privilege context switching error in Microsoft Office SharePoint allows an authorized attacker to elevate privileges over a network. |
| pkexec, when used with --user nonpriv, allows local users to escape to the parent session via a crafted TIOCSTI ioctl call, which pushes characters to the terminal's input buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: run set info with opener credentials
SMB2 SET_INFO handlers call path-based VFS helpers after checking the
access mask granted to the SMB handle. Those helpers perform their owner,
inode permission and LSM checks using the current ksmbd worker credentials.
Run the complete SET_INFO dispatch with the credentials captured when the
handle was opened. This also removes the separate security information
credential setup and keeps all SET_INFO classes under one credential scope.
Direct override_creds() is used because it can nest with the request
credential overrides already used by rename and link helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for FSCTL mutations
SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB
handle but call VFS xattr, fallocate or fileattr helpers with the current
ksmbd worker credentials. Those helpers can revalidate inode permissions,
ownership and LSM policy independently of the SMB handle access mask.
Run each operation with the credentials captured in the target file when
the handle was opened. Keep credential handling local to these single-file
FSCTLs rather than applying session credentials to the complete IOCTL
handler, which also contains handle-less and multi-handle operations. |
| Privilege escalation in the DOM: Navigation component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| Privilege escalation via background service of OpenVPN Connect 3.5.1 through 3.8.1 on macOS allows attackers to execute arbitrary commands with elevated privileges via local IPC channel |