| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/bpf-ops: clear bpf_ctx while submitting SQEs
bpf_io_uring_submit_sqes() calls io_submit_sqes() from inside the loop
program, with current->bpf_ctx set, and requests issued inline run with
it set too. The socket code uses has_current_bpf_ctx() to recognize
calls from bpf_setsockopt() and friends, where the caller holds the
socket lock and has already been vetted, and skips both.
So a SOCKET_URING_OP_SETSOCKOPT from the SQ passes sockopt_capable()
without the capability, and runs without lock_sock(). A task with no
capability can set SO_MARK, IP_TRANSPARENT or TCP_REPAIR, and two
threads changing IP_OPTIONS on one socket, one through the ring, double
free in no time. SOCK_DESTROY via IORING_OP_SENDMSG ends up in
tcp_abort() without the lock the same way.
Clear the run context around io_submit_sqes(). The SQEs come from
userspace and must be issued like those of any other ring. They still
run inside the program's RCU tasks trace read section, so a request
that sleeps there holds up that grace period, but other request types
do that already. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: revert fsids on durable reconnect and replay failure
On a durable handle reconnect or a request replay, smb2_open() switches
to the SMB user's fsids before calling ksmbd_vfs_getattr(). If that call
fails, the code jumps to err_out2 and skips ksmbd_revert_fsids() at
err_out1. The user's credentials then stay installed on the shared ksmbd
worker. Later work on that worker, including other users' requests, runs
with the first user's fsuid, fsgid and supplementary groups.
ksmbd_free_work_struct() also warns, because work->saved_cred is still
set.
Jump to err_out1 instead. No path is held at this point, so skipping the
path_put() at err_out is correct. |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.105.0, contain a Least Privilege Violation vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privilege and Denial of Service. |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.105.0, contain an Incorrect Default Permissions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Arbitrary Code Execution and Elevation of Privilege. |
| Incorrect Authorization vulnerability in Apache Tomcat could occur during a request dispatch if the request depended on a security-role-ref provided by the dispatch target.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.27, from 10.1.0-M1 through 10.1.61, from 9.0.0.M1 through 9.0.123.
The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.29, 10.1.62 or 9.0.124, which fixes the issue.
Note: Tomcat 11.0.28 was not released |
| A container privilege escalation flaw was found in certain Multi-Cloud Object Gateway Core images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container |
| Incorrect default permissions in the ASUS DisplayWidget Center allow a local, low-privileged user to achieve arbitrary code execution in the security context of another user via a crafted executable placed in that user-writable directory, which the application launches when the other user runs it and uses a particular feature.Refer to the '
Security Update for ASUS Display Widget Center ' section on the ASUS Security Advisory for more information. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Map flex file layout IDs through the request's user namespace
nfsd4_ff_proc_layoutget() and nfsd4_ff_encode_layoutget() translate
the file's owner and group with init_user_ns, but every other identity
nfsd places on the wire goes through nfsd_user_namespace(). When the
transport carries a credential from a non-initial user namespace, the
flex file layout reports host-global IDs. The client copies those IDs
into the AUTH_SYS credential it presents to the data server, and
svcauth_unix_accept() resolves that credential in the transport's
namespace, so data server I/O runs under an identity unrelated to the
file's owner.
Switching to the request's namespace introduces a second hazard.
from_kuid() returns (uid_t)-1 when the target namespace has no
mapping for the owner, and the IOMODE_READ arm adds one to that
result to derive an identity for which the data server denies
writes. The addition would wrap to zero, handing the client uid 0
instead of an identity distinct from the owner.
Translate both IDs in nfsd4_ff_proc_layoutget(), which has the
svc_rqst, and carry the wire values in struct pnfs_ff_layout.
from_kuid_munged() substitutes overflowuid for an unmapped owner and
thus never returns (uid_t)-1, so the increment cannot wrap to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require DELETE access for delete-on-close opens
smb2_open() accepts FILE_DELETE_ON_CLOSE on an existing file without
DELETE in DesiredAccess. When the request asks only for
FILE_READ_ATTRIBUTES or READ_CONTROL, it also skips inode_permission()
and the parent directory MAY_WRITE | MAY_EXEC check that delete-on-close
is meant to get. The file is then marked for deletion by a caller who
could not delete it.
The unlink happens later, in __ksmbd_inode_close(), when the last handle
on the inode is closed, and it runs with the credentials of that handle.
If the caller closes last, the unlink fails. If another user who can
write the parent directory, such as the file's owner, still has the file
open, the file is deleted when that user closes it. Until then new opens
of the file fail with STATUS_DELETE_PENDING. So a user with only search
permission on a directory can delete a file in it, or block opens of it,
while the owner has it open.
A MAXIMUM_ALLOWED open that also requests DELETE has the same problem.
The requested access is replaced with the maximal access, which does not
include DELETE when the caller cannot write the parent directory, and the
later permission checks are skipped as already done.
MS-FSA 2.1.5.1 requires an open with FILE_DELETE_ON_CLOSE and without
DELETE in DesiredAccess to fail with STATUS_INVALID_PARAMETER, and Samba
does the same. Add that check to the CreateOptions validation, using
the generic-mapped DesiredAccess so that GENERIC_ALL still qualifies.
This also refuses MAXIMUM_ALLOWED with FILE_DELETE_ON_CLOSE but no
explicit DELETE, as MS-FSA and Samba do. When MAXIMUM_ALLOWED is
requested with DELETE but the maximal access does not include DELETE,
fail with STATUS_ACCESS_DENIED. With DELETE requested, delete-on-close
opens go through the existing parent directory check. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: honour F_SEAL_EXEC when an ACL is set
The owner of a memfd sealed with F_SEAL_EXEC can still change its
execute bits by setting a POSIX access ACL. With CONFIG_TMPFS_POSIX_ACL,
this lets an unprivileged owner make a non-executable memfd executable,
bypassing vm.memfd_noexec=2.
simple_set_acl() updates i_mode directly, bypassing the seal check in
shmem_setattr(). Add shmem_set_acl() to check the resulting mode. Share
the F_SEAL_EXEC check with shmem_setattr() using memfd_check_seals_mode()
in include/linux/memfd.h.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: use common helper; simplify description ] |
| Tanium addressed an incorrect default permissions vulnerability in Tanium Server. |
| Incorrect default permissions in Nitro PDF Pro before 26.4 on Windows allow a local low-privileged user to execute code in the context of another user who launches the application. |
| Craft CMS from 5.0.0 before 5.11.4 contains an improper session management vulnerability that fails to invalidate existing sessions when 2FA is enabled and allows disabling 2FA without re-authentication. Attackers holding a hijacked or stale session can retain full account access and silently remove 2FA without the password, authenticator code, or recovery code. |
| Incorrect directory permissions within AMD Vivado™ Lab Solutions could allow a local user-privileged attacker to escalate their privileges, potentially resulting in arbitrary code execution. |
| Dell SupportAssist OS Recovery, versions prior to 5.5.16.3, contain an Insecure Inherited Permissions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to unauthorized file operations with elevated privileges. |
| Vulnerability in Oracle Application Testing Suite (component: OpenScript). The supported version that is affected is 13.3.0.1. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Application Testing Suite executes to compromise Oracle Application Testing Suite. Successful attacks of this vulnerability can result in takeover of Oracle Application Testing Suite. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| A vulnerability was identified in CoolerMaster MASTERPLUS+ 1.9.6. This affects the function sub_11504 in the library WinRing0x64.sys of the component Device Driver. The manipulation of the argument PhysicalAddress leads to incorrect default permissions. The attack can only be performed from a local environment. The vendor was contacted early about this disclosure but did not respond in any way. |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.14.9, the app-data copy seeder uses shutil.copy() to copy cached package files into later environments, causing cached source modes to override the current run's umask. A cache populated under a permissive umask can therefore produce files writable by another local account in a later traversable environment, allowing package code such as pip/__init__.py to be modified and executed by the environment owner. The attacker cannot force the earlier umask, and a private destination parent prevents access. This issue is fixed in version 21.14.9. |
| During an internal security assessment, a potential vulnerability was discovered in Lenovo PC Manager, distributed exclusively in the Chinese market, that could allow a local user to escalate privileges. |
| Incorrect default permissions in Samsung Contacts prior to SMR Nov-2026 Release 1 allows local attackers to access profile configuration. |