| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The glob functions in the GNU C Library versions 2.44 and earlier may free the same heap block twice when a memory allocation fails while glob prepends the directory name to the names it matched. The names already rewritten are freed, but their pointers stay in the result vector, and the error path frees them again with globfree.
The allocation must fail after at least one name has been rewritten, so the issue can only be reached when the process is already close to its memory limit, for example under an address space limit (RLIMIT_AS) or on a 32-bit system. The attacker needs control to make the result large enough to make the program or service run out of memory, either by controlling the glob pattern and having knowledge of the filesystem layout or through other means. This issue affects all architectures and ABIs supported by the GNU C Library. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/loongson: Fix double free on BO initialization failure
If ttm_bo_init_validate() fails, it drops the buffer object's reference
and cleans it up through the supplied destroy callback. lsdc_bo_destroy()
releases the GEM object and frees the enclosing lsdc_bo, so freeing it
again in lsdc_bo_create() causes a double free on a synchronous failure
path.
Let TTM own the cleanup after initialization has started and return the
error directly. Keep the explicit free on drm_gem_object_init() failure,
which occurs before ownership is passed to TTM.
Tested on LS7A2000 by making drm_vma_offset_add() return -ENOSPC for one
selected dumb-buffer creation. The error reached userspace, the destroy
callback ran once, and no handle was published or tracked BO retained.
Normal buffer creation, zeroing, mapping, readback and release passed.
AI assistance was used for the ownership analysis, fix, fault-injection
tools, build and test execution. |
| In the Linux kernel, the following vulnerability has been resolved:
media: hackrf: fix use-after-free in hackrf_alloc_urbs() error path
hackrf_alloc_urbs() frees the URBs it allocated so far when one
allocation fails, but leaves the entries in dev->urb_list[] and
dev->urbs_initialized untouched. The caller, hackrf_start_streaming(),
then calls hackrf_free_urbs() on the error path, which walks
dev->urbs_initialized entries and calls usb_free_urb() a second time on
the already-freed URBs, causing a use-after-free (slab-use-after-free
Write in usb_free_urb()).
Drop the redundant cleanup loop inside hackrf_alloc_urbs() and let
hackrf_free_urbs(), which the caller already invokes on error, own the
cleanup of the successfully allocated URBs. |
| Double free during DOM XML serialization.
The XML serializer of Dom\XMLDocument and Dom\HTMLDocument can share ownership of a generated namespace prefix between the namespace-prefix maps of an element and a descendant, so the prefix is used after being freed and then freed a second time. The document does not need to be malformed. An application that parses attacker-controlled XML or HTML with these classes and serializes it with saveXml() can be crashed, and repeated requests can cause denial of service. Code execution has not been demonstrated.
This issue affects PHP versions 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: fix preallocation discarding before an empty allocation extent
udf_discard_prealloc() finds the last extent of a file by peeking at
the next one with udf_next_aext() and stopping when that returns 0.
The peek reads into eloc and elen, and the code then uses them as the
last extent. But when udf_next_aext() returns 0 they hold no defined
value: if the extent list ends in a continuation descriptor that leads
to an empty allocation extent, they describe that continuation, i.e.
the block of the empty allocation extent, one block long.
The kernel creates such lists itself: when udf_delete_aext() removes
the only descriptor of the last allocation extent in a list, it leaves
that allocation extent empty and the continuation to it in place.
If the last extent is a preallocation, udf_discard_prealloc() deletes
it with udf_delete_aext(), which finds the following allocation extent
empty, so it also removes the continuation and frees that allocation
extent's block. udf_discard_prealloc() then frees eloc and elen: that
block a second time, instead of the preallocated blocks. On a space
bitmap the preallocated blocks leak and the free block count drifts.
On an unallocated space table the second free adds a second free
extent for the same block, which is later handed out twice: fsx as run
by generic/091 and generic/263 ends up with two parts of its test file
in one block and reads back bad data.
Peek into separate variables, so that eloc and elen keep the last
extent that udf_next_aext() returned with 1. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix duplicate dependency fence releases
drm_sched_job_add_dependency() consumes its fence reference on success
and failure. Do not release the fence again if
drm_sched_job_add_dependency() fails.
(cherry picked from commit e04f3dfb2071451633e6440a3911a9bb65df9144) |
| In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: fix double free in em28xx_alloc_urbs
When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs()
explicitly frees all items within usb_bufs->buf before calling
em28xx_uninit_usb_xfer(), which also frees these items, causing them to be
freed twice.
BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96)
Free of addr ffff88802fd37c00 by task kworker/1:2/1182
Workqueue: events request_module_async
Call Trace:
kasan_report_invalid_free (mm/kasan/report.c:557)
check_slab_allocation (mm/kasan/common.c:235)
kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1))
usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96)
usb_free_urb (drivers/usb/core/urb.c:95)
em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964)
em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076)
em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698)
em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248)
request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 1182:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
__kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439)
em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081)
em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698)
em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248)
request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Freed by task 1182:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801)
em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084)
em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698)
em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248)
request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer()
handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Fix potential double-free at error path
The fix for caiaq driver's resource management to handle the errors
tries to release the resources in a common destructor call, but as a
sashiko review for another patch suggested, some of the audio
resources such as URBs have been already freed, and this may lead to a
double-free.
For addressing the double-free, call the common destructor function
from each place, and assure that the resource pointers get cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/gsc: Fix double-free of managed BO in error path
The error path in xe_gsc_init_post_hwconfig() explicitly frees a BO
allocated with xe_managed_bo_create_pin_map() via
xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm
cleanup action registered, this causes a double-free when devm
unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
(cherry picked from commit 71d61e3e299a17139e47f980a4d6f425b2c59bf7) |
| The regcomp and regexec functions in the GNU C Library version 2.3 to version 2.44 may read freed memory and free the same heap block twice when a memory allocation fails while a regular expression is compiled or matched. The re_dfa_add_node (the NFA node table) and build_range_exp (bracket ranges) grow several arrays with consecutive realloc calls and store the new pointers only after all of them succeed. When a later call fails, the pattern buffer keeps pointers to blocks that were already freed, and the error cleanup frees them again. In regexec, the back-reference cache (match_ctx_add_entry) frees its array when a realloc fails but keeps the pointer, which is freed again on the error path.
An attacker does not need to supply a crafted regular expression: patterns large enough to grow these arrays are common. The failure has to hit a specific allocation, though, so the issue can only be reached when the system is already under memory pressure. An attacker who supplies the pattern or the subject string has little control over which allocation fails, so the expected impact is a crash of the process. This issue affects all architectures and ABIs supported by the GNU C Library. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Fix potential UAF when ddgst mismatch
Shivam Kumar found via vulnerability testing:
When data digest is enabled on an NVMe/TCP connection and a digest
mismatch occurs on a non-final H2C_DATA PDU during an R2T-based
data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()
calls nvmet_req_uninit() — which performs percpu_ref_put() on the
submission queue — but does NOT mark the command as completed. It
does not set cqe->status, does not modify rbytes_done, and does not
clear any flag. When the subsequent fatal error triggers queue
teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands,
checks nvmet_tcp_need_data_in() for each one, and finds that the
already-uninited command still appears to need data (because
rbytes_done < transfer_len and cqe->status == 0). It therefore calls
nvmet_req_uninit() a second time on the same command — a double
percpu_ref_put against a single percpu_ref_get. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: Zero out sring pointers on unmap
If xenvif_map_frontend_data_rings() fails when a ring is already mapped,
it unmaps them via xenvif_unmap_frontend_data_rings() which keeps the
ring pointers unchanged. xenvif_connect_data()'s cleanup path calls
xenvif_disconnect_queue() which in turn calls
xenvif_unmap_frontend_data_rings() again, which will attempt to unmap the
pointers a second time.
Zero out the ring pointers after they are unmapped to avoid this issue.
This is XSA-532 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix fils_discovery double free on alloc failure
ieee80211_set_fils_discovery() calls kfree_rcu() on the old template
before allocating the replacement. If the kzalloc() then fails, it
returns -ENOMEM while link->u.ap.fils_discovery still points at the
object already queued for freeing. A later update or AP teardown
(ieee80211_stop_ap()) re-queues that same rcu_head; the second free is
caught by KASAN when the RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800c065280 by task swapper/0/0
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-96 of size 96
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
l2cap_ecred_reconf_rsp() returns early on success without clearing
chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp,
l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a
successful transaction to prevent the channel from matching subsequent
responses with the recycled ident value.
A remote attacker that completed a reconfiguration as the peer can
replay a failure response with the stale ident, causing the kernel to
match and destroy the already-established channel via
l2cap_chan_del(chan, ECONNRESET).
Clear chan->ident for all matching channels on success, and harden the
failure path by using l2cap_chan_hold_unless_zero() consistent with
other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix warning when unbinding
If there is an error during some initialization related to firmware,
the buffers dp->tx_ring[i].tx_status are released.
However this is released again when the device is unbinded (ath11k_pci),
and we get:
WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90
Call Trace:
free_large_kmalloc
ath11k_dp_free
ath11k_core_deinit
ath11k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set the buffers to NULL after releasing in
order to avoid the double free. |
| libssh2 through 1.11.1, fixed in commit 5e47761, contains a double-free vulnerability in the sftp_open() function in src/sftp.c that allows a malicious SSH server to corrupt the heap of any authenticated client opening an SFTP session. When a server responds to SSH_FXP_OPEN with SSH_FXP_STATUS containing FX_OK, the response data buffer is freed, and if a subsequent sftp_packet_require() call returns a specific error such as LIBSSH2_ERROR_CHANNEL_PACKET_EXCEEDED, the same pointer is freed a second time, enabling tcache dup conditions on glibc systems that allow overlapping allocations and function pointer overwrites. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl()
nvme_fc_delete_assocation() waits for pending I/O to complete before
returning, and an error can cause ->ioerr_work to be queued after
cancel_work_sync() had been called. Move the call to cancel_work_sync() to
be after nvme_fc_delete_association() to ensure ->ioerr_work is not running
when the nvme_fc_ctrl object is freed. Otherwise the following can occur:
[ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL
[ 1135.917705] ------------[ cut here ]------------
[ 1135.922336] kernel BUG at lib/list_debug.c:52!
[ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary)
[ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025
[ 1135.950969] Workqueue: 0x0 (nvme-wq)
[ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b
[ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046
[ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000
[ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0
[ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08
[ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100
[ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0
[ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000
[ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0
[ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1136.055910] PKRU: 55555554
[ 1136.058623] Call Trace:
[ 1136.061074] <TASK>
[ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0
[ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0
[ 1136.071898] ? move_linked_works+0x4a/0xa0
[ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.081744] ? __die_body.cold+0x8/0x12
[ 1136.085584] ? die+0x2e/0x50
[ 1136.088469] ? do_trap+0xca/0x110
[ 1136.091789] ? do_error_trap+0x65/0x80
[ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.101289] ? exc_invalid_op+0x50/0x70
[ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20
[ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.120806] move_linked_works+0x4a/0xa0
[ 1136.124733] worker_thread+0x216/0x3a0
[ 1136.128485] ? __pfx_worker_thread+0x10/0x10
[ 1136.132758] kthread+0xfa/0x240
[ 1136.135904] ? __pfx_kthread+0x10/0x10
[ 1136.139657] ret_from_fork+0x31/0x50
[ 1136.143236] ? __pfx_kthread+0x10/0x10
[ 1136.146988] ret_from_fork_asm+0x1a/0x30
[ 1136.150915] </TASK> |
| Pixar Animation Studio OpenUSD Crate File Parsing Double Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Pixar Animation Studio OpenUSD. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of USDC and USDZ files. The issue results from the lack of validating the existence of an object prior to performing further free operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-30428. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list
A pseudo-locked group's RMID is freed when it is created. On unmount
rmdir_all_sub() unconditionally frees all RMID of all groups, resulting
in a double-free of the pseudo-locked group's RMID. The consequence of this
is that the original free results in the pseudo-locked group's RMID being
added to the rmid_free_lru linked list and the second free then attempts
to add the same RMID entry to the rmid_free_lru again.
Do not double-free a pseudo-locked group's RMID. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: fix double free and WARN_ON in add_mtd_device() error paths
When device_register() or mtd_nvmem_add() fails inside
add_mtd_device() for a partition, the error handling triggers
mtd_release() via put_device() or device_unregister(). mtd_release()
calls release_mtd_partition() which frees the mtd_info structure.
However, callers such as mtd_add_partition() and add_mtd_partitions()
also call free_partition() in their error paths, resulting in a double
free.
Additionally, release_mtd_partition() hits WARN_ON(!list_empty(
&mtd->part.node)) because the partition node is still linked in the
parent's partitions list when the release callback fires from the
add_mtd_device() error path.
Fix this by overriding dev->type and dev->release before put_device()
in the error paths, so that device_release() invokes a no-op function
instead of mtd_release(). For the mtd_nvmem_add() failure case,
device_unregister() is replaced with device_del() to separate the
device removal from the final kobject reference drop, allowing the
override to take effect before put_device() is called.
The callers' error paths (list_del + free_partition) remain the sole
owners of mtd_info lifetime on add_mtd_device() failure, which is the
expected contract.
The normal partition teardown path is not affected: del_mtd_device()
goes through kref_put() -> mtd_device_release() -> device_unregister()
with dev->type still set to &mtd_devtype, so mtd_release() ->
release_mtd_partition() continues to work correctly for the regular
removal case. |