| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Segment Routing over IPv6 (SRv6) Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software, known as NGOAM, could allow an unauthenticated, remote attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) on an affected device.
This vulnerability is due to improper input validation of IP traffic when the NGOAM and SRv6 features are enabled. An attacker could exploit this vulnerability by sending crafted packets to an IP interface on an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges and could cause process crashes resulting in a reload and DoS condition. |
| A vulnerability in the VXLAN Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software, known as NGOAM, could allow an unauthenticated, remote attacker to execute arbitrary code with root privileges or cause a Denial-of-Service (DoS) on an affected device.
This vulnerability is due to improper input validation of IP traffic when the NGOAM feature is enabled. An attacker could exploit this vulnerability by sending crafted packets to an IP interface on an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges and could cause process crashes resulting in a reload and DoS condition. |
| A vulnerability in the VXLAN Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software, known as NGOAM, could allow an unauthenticated, remote attacker to execute arbitrary code with root privileges or cause a Denial-of-Service (DoS) on an affected device.
This vulnerability is due to improper input validation of IP traffic when the NGOAM feature is enabled. An attacker could exploit this vulnerability by sending crafted packets to an IP interface on an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges and could cause process crashes resulting in a reload and DoS condition. |
| Dbit WIFI4 N300 1.0.0 devices allows administrators (from the local Wi-Fi network) to execute OS commands by leveraging a stack-based buffer overflow via the /api/addStaticDHCP comment field, |
| TP-Link Tapo
C500 v2.0 contains an out-of-bounds stack write vulnerability in its ONVIF PTZ
SOAP handlers. An authenticated ONVIF client can submit an excessive number of
preset-related elements, causing writes beyond the bounds of fixed-size stack
arrays and resulting in a crash of the affected service.
Successful
exploitation may allow an authenticated attacker to cause the affected service
to crash, resulting in a denial-of-service condition. Repeated exploitation may
repeatedly disrupt camera management and PTZ-related functionality until the
service recovers or restarts. |
| Unsigned integer underflow in wstrncat() in src/port.c in wolfSSL wolfSSH from v1.4.11 through v1.5.0 on non-Windows platforms allows an authenticated remote attacker to write one out-of-bounds null byte past the end of a stack buffer by sending a crafted SFTP path. wolfSSH_RealPath() in src/ssh.c appends each path component with a remaining-size bound (outSz - curSz) rather than the full destination size, so once the accumulated path reaches half the output buffer the size_t computation n - strlen(s1) - 1 wraps to near SIZE_MAX. The strncat() call is then effectively unbounded and copies the whole component; when that component exactly fills the remainder of the buffer, its terminating null is written one byte past the end. The caller's own length check keeps the copied data inside the buffer, so the overflow is limited to that single null byte, which may corrupt an adjacent stack value and crash the process. Applications that call the public wolfSSH_RealPath() with an output buffer smaller than the input path are additionally exposed to an unbounded copy, because the word32 expression outSz - segSz in that length check also wraps. |
| VMware Workstation and Fusion contain a stack-based buffer-overflow vulnerability in HGFS. A malicious actor with local administrative privileges on a virtual machine may exploit this issue to execute code as the virtual machine's VMX process running on the host.
Affected versions:
- VMware Workstation: 25H2, 26H1 (fixed in 26H1u1)
- VMware Fusion: 25H2, 26H1 (fixed in 26H1u1) |
| The Bluetooth Mesh On-Demand Private Proxy solicitation handler in subsys/bluetooth/mesh/solicitation.c copies a received Solicitation PDU into a fixed 17-byte stack buffer without bounding the source length. In sol_pdu_decrypt(), out is allocated as NET_BUF_SIMPLE(17) and then filled with net_buf_simple_add_mem(out, in->data, in->len); net_buf_simple_add() guards its tailroom only with __ASSERT_NO_MSG, which is compiled out in production builds, so when in->len > 17 the underlying memcpy writes attacker-controlled bytes past the 17-byte stack buffer. The copy occurs before any decryption or authentication, so no key material is required to trigger it.
The oversized length arises because the mesh scan callback in subsys/bluetooth/mesh/adv.c calls net_buf_simple_restore() before dispatching to bt_mesh_sol_recv(), leaving buf->len covering the entire remaining advertising payload rather than just the Solicitation Service Data. After the parser locates the Service Data AD and consumes the Identification Type byte, the remaining buf->len is the 17-octet Network PDU plus any trailing advertising bytes, and prior to this fix there was no maximum-length check (only a minimum). An attacker can therefore append extra AD structures or padding after the Solicitation Service Data to make buf->len exceed 17.
bt_mesh_scan_cb() is registered directly as the BLE scan callback, so buf is raw, unauthenticated advertising data received over the air. Any device in radio range can send a non-connectable advertisement carrying a crafted mesh Proxy Solicitation to a node that has CONFIG_BT_MESH_OD_PRIV_PROXY_SRV enabled and is currently eligible to be solicited (GATT proxy disabled, On-Demand Private Proxy enabled), with no pairing, bonding, or provisioning. The result is an attacker-controlled stack overwrite — plausibly leading to remote code execution and at minimum a reliable remote denial of service. The fix trims buf->len to the spec-fixed 17 octets (dropping the PDU if fewer remain) before decryption. |
| A stack-based buffer overflow in the ASUS router modules allows an authenticated nearby user to execute arbitrary code via a crafted configuration file upload that exceeds the expected buffer size.Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information. |
| On affected Arista Wi-Fi access points, a memory corruption vulnerability exists in access point's wired uplink network endpoints. An unauthenticated attacker can crash the sensor service or potentially achieve remote code execution. Exploitation requires the attacker to be on the same network segment as the access point's wired uplink. |
| On affected Arista Wi-Fi access points, an unauthenticated attacker with network access to the capture service can send a crafted packet to cause the service to crash or potentially achieve remote code execution. This exploit requires an uncommonly used non-default streaming mode. |
| On affected Arista Wi-Fi access points with captive portal, or application firewall enabled on at least one SSID, a vulnerability in the wireless gateway service could allow an unauthenticated network-adjacent attacker to send a crafted packet that triggers a stack overflow, resulting in a denial-of-service condition or potentially execute arbitrary code on the device. The wireless gateway service is automatically restarted after a crash, allowing repeated exploitation attempts. |
| A vulnerability has been found in Tenda AC5 02.03.01.111_multi. Affected by this issue is some unknown functionality of the file /goform/setWifi of the component Wifi Handler. Such manipulation of the argument wifiPwd leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| A flaw was found in the interactive shell of the xmllint command-line tool, used for parsing XML files. When a user inputs an overly long command, the program does not check the input size properly, which can cause it to crash. This issue might allow attackers to run harmful code in rare configurations without modern protections. |
| A flaw has been found in OpenSC up to 0.27.1. The impacted element is the function setcos_construct_fci_44 of the file src/libopensc/card-setcos.c. Executing a manipulation of the argument type_attr can lead to stack-based buffer overflow. The attack can be launched remotely. This patch is called ad730304052937c32b4eb489a06835ac6123632c. It is best practice to apply a patch to resolve this issue. |
| Stack-based buffer overflow in mod_vhost_alias in Apache Software Foundation Apache HTTP Server through 2.4.68 on all platforms allows a remote client to cause a denial of service or potentially execute arbitrary code via an HTTP request with a Host header exceeding 8192 bytes when VirtualDocumentRoot uses a hostname format specifier and LimitRequestFieldSize is raised above the default.
Users are recommended to upgrade to version 2.4.69, which fixes this issue. |
| A security vulnerability has been detected in Totolink A3002MU 1.0.0-B20230403.1455. This affects an unknown function of the file /boafrm/formIpQoS of the component QoS Rule Handler. The manipulation of the argument addQos/comment/entry_name leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. |
| In Video HAL, there is a possible escalation of privilege due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS11375674; Issue ID: MSV-9571. |
| A stack buffer overflow vulnerability was found in the 9P protocol implementation of NFS-Ganesha. The server does not validate the number of path components in a TWALK request against the protocol-defined limit of 16. An attacker can send a specially crafted TWALK message with thousands of path components, causing the server to write past the end of a fixed-size stack buffer during response construction. This can result in a crash or potentially remote code execution. The 9P protocol handler does not implement authentication, so the vulnerability is reachable without credentials by any client with network access to the 9P listener. |
| Memory Corruption when processing invalid HT40 channel layouts during dynamic channel switching operations. |
