| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: Calling EVP_EncodeBlock() with an input length close to INT_MAX
may overflow the calculation of the encoded output size and write past the end
of the caller-supplied output buffer.
Impact summary: No path by which an attacker can trigger this has been
identified. An application that passes an input length near INT_MAX to
EVP_EncodeBlock() could suffer a heap buffer overflow, crashing or corrupting
its own memory, but it must itself supply such a length.
CWE: CWE-190: Integer Overflow or Wraparound
Description: EVP_EncodeBlock() base64-encodes a buffer of a caller-supplied
length into an output buffer that the caller allocates. The caller is expected
to reserve 4*((len+2)/3)+1 bytes. For input lengths close to INT_MAX, the
arithmetic that computes the encoded length overflows a signed integer, so the
function writes more data than the documented output size. The result is a
heap buffer overflow in the calling process.
Reaching this requires an application to pass an input length near INT_MAX to
EVP_EncodeBlock(). OpenSSL's TLS, QUIC and CMS implementations never encode
buffers of that size, and the command line tools cannot practically be made to
do so: the limits on reading a proxy password from a file and on bignum sizes
prevent it. An application that accepts an attacker-controlled length and
forwards it to EVP_EncodeBlock() without its own bound check is exposed.
The severity is Low because no attacker-controlled path to the overflow is
known. The caller must already hold a buffer of about two gigabytes before the
defect can be reached.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Verifying a maliciously crafted CMS or PKCS#7 SignedData message with CRL checking enabled may consume excessive CPU time, growing with the square of the message size. |
| Issue summary: A DANE-enabled TLS client may crash by dereferencing a NULL
pointer when processing an unusual combination of certificate and TLSA
records.
Impact summary: The impact is limited to a client crash (potential Denial
of Service).
CWE: CWE-476: NULL Pointer Dereference
Description: A DANE-enabled TLS client that supports TLSA records with at
least one of the PKIX-TA(0) or PKIX-EE(1) usages alongside the DANE-TA(2)
usage may crash by dereferencing a NULL pointer if the server claims a trusted
CA's certificate to be its end-entity certificate and has an unusual mix of
associated TLSA records.
DANE SMTP clients should not be affected since only the
DANE-TA(2) and DANE-EE(3) TLSA record usages are specified applicable
in SMTP. For example, the Postfix MTA is not affected, while the Exim
MTA does not at present use OpenSSL's DANE implementation.
Use of DANE in validation of RFC7250 raw public keys (RPKs) is also
unaffected, as these only use DANE-EE(3) TLSA records.
Only applications that support combining the DANE PKI with a traditional PKI
are potentially affected. A DANE-enabled browser or similar, that uses
OpenSSL's DANE API could be affected.
FIPS impact: no
The DANE API is outside the FIPS module boundary. |
| Issue summary: Receiving crafted out-of-sequence DTLS handshake fragments may
cause OpenSSL to allocate a full message-length reassembly buffer for each
buffered message, so a small amount of wire data consumes a large amount of
memory.
Impact summary: A remote attacker can send a few small crafted DTLS handshake
fragments to make a DTLS server or client allocate well over a megabyte of
memory per connection, which may lead to memory exhaustion and Denial of
Service if many connections are made.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: DTLS handshake messages can arrive out of order and fragmented,
so OpenSSL buffers fragments of up to ten out-of-sequence messages until
reassembly is possible. When the first fragment of a new message arrives,
OpenSSL allocates a buffer sized to the full message length declared in the
fragment header, plus a reassembly bitmap, instead of storing only the bytes
actually received. The declared length is capped by the maximum certificate
list size, 128KB by default, and that cap applies to every handshake message
type rather than only to Certificate messages.
Only DTLS endpoints reach this code. TLS, QUIC and applications that do not
use DTLS are unaffected. An attacker sends fragments that declare a large
message length but carry almost no data, using up to ten distinct message
sequence numbers.
A single connection can then hold roughly 1.4MB of buffers from about 156
bytes on the wire. Because the number of buffered messages is capped, memory
exhaustion requires many connections or many peers, which is why the severity
is Low.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: A QUIC server that rejects a stream opened by the peer may
retain that stream's state for the lifetime of the connection if the peer
resets the stream before the rejection is signalled, even though the peer's
stream credit is returned.
Impact summary: A remote client that completes a QUIC handshake can repeatedly
open and reset streams, causing server memory to grow without bound until the
process runs out of memory and every connection on it is lost. This is a
Denial of Service.
CWE: CWE-401: Missing Release of Memory after Effective Lifetime
Description: QUIC servers track each stream the peer opens. When the incoming
stream policy rejects a stream, OpenSSL schedules a STOP_SENDING frame, marks
the stream deleted and returns the peer's stream credit. A deleted stream is
collected only once its receive part is fully drained, which for a rejected
stream means the STOP_SENDING has been acknowledged. If the peer sends
RESET_STREAM first, the reset cancels the pending STOP_SENDING, so it is never
sent or acknowledged and the stream is never collected.
The default configuration reaches this path. Once a connection has a default
stream, meaning the application has read from or written to the connection as
the tutorial server does, the effective incoming stream policy rejects streams
the application does not accept. Applications that set the REJECT policy
explicitly are affected too.
Each retained stream costs about 300 bytes, and the peer's stream credit
window paces how quickly they accumulate. A client that keeps the connection
open and keeps opening and resetting streams grows server memory without
bound. The severity is Low because growth is slow, needs a long-lived
connection, and causes no memory corruption or disclosure.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: A server configured with the Suite B certificate flag through
SSL_CTX_set_cert_flags() and with TLS 1.3 enabled may read past the end of a
fixed group list when it processes a ClientHello whose supported_groups and
key_share contain no Suite B group.
Impact summary: A remote client can send a ClientHello that makes the server
read past the end of a static array. The values read are never returned to the
client, so no memory is disclosed; on builds with sanitizers or hardened
allocators the read may crash the process, causing Denial of Service.
CWE: CWE-125: Out-of-bounds Read
Description: When the Suite B certificate flag is set, OpenSSL restricts the
accepted groups to P-256 and P-384 by substituting a fixed two-element list
for the configured group list. The tuple machinery used for key-share
selection was not updated for this substitution: tls1_get_group_tuples() still
returns the configured tuples, which by default describe eight groups. The
server-side walk in tls_parse_ctos_key_share() then advances through the
two-element list using those tuple counts without checking the cumulative
offset against the number of groups present.
Only applications that call SSL_CTX_set_cert_flags() with
SSL_CERT_FLAG_SUITEB_128_LOS and leave TLS 1.3 enabled are affected. The
openssl s_server -suiteB_128 option sets an X.509 verification parameter
instead, so the stock command line server is not vulnerable. Default
configurations do not reach this code.
A client that offers only groups outside the Suite B set, such as X25519,
forces every tuple to be walked and the read to run past the array. The bytes
read are compared against client group IDs and never sent back, so no memory
is disclosed. On builds with address sanitizers or hardened allocators the
read can abort the process; in ordinary release builds it reads a few bytes of
adjacent constant data.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: When an application passes a stack to
PEM_X509_INFO_read_bio_ex() to add entries to, and reading fails,
OpenSSL frees every entry in the stack, both the old ones and any new
ones, but leaves them in the stack.
Impact summary: An application that passes an existing stack to
PEM_X509_INFO_read_bio_ex() and keeps using it after a failed read may
use memory that was already freed. This can cause a crash or, in
principle, memory corruption. Malformed PEM data can make the read fail,
but only applications that pass an existing stack are affected, and
OpenSSL itself does not do this.
CWE: CWE-416: Use After Free
Description: PEM_X509_INFO_read_bio_ex() reads certificates, CRLs and
private keys from PEM data and adds them to a stack of X509_INFO
structures. If the application passes a stack that is not NULL, the
function adds the new entries to it and must leave the entries that are
already there unchanged.
If reading fails, the function frees every entry in the stack. This
includes the entries that were there before the call, and the entries
added by the call. It does not remove these entries from the stack, so
the stack keeps pointers to freed memory. The failure can happen at any
point, even before any entry was added. A PEM item with invalid content
is enough. This also happens if the stack was empty: entries added
before the failure are freed but stay in the stack.
An application that then reads or frees the stack will use memory that
was already freed. This can crash the application or, in principle,
corrupt memory.
Only applications that pass a stack that is not NULL are affected.
OpenSSL itself never does this. Its own callers, including the code that
TLS uses to load CA certificates, always pass NULL. When the stack is
NULL, the function frees only the entries that it created itself, which
is safe. We expect that very few applications pass an existing stack. An
attacker can make the read fail with malformed PEM data, but cannot make
an application pass an existing stack.
The same problem affects PEM_X509_INFO_read_bio(), PEM_X509_INFO_read()
and PEM_X509_INFO_read_ex(), which use the same code. OpenSSL 1.1.1 and
1.0.2 have only the first two of these functions.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.
Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.
The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).
This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.
In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.
This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available. |
| Issue summary: Checking excessively long invalid RSA public keys may take
a long time.
Impact summary: Applications that use the function EVP_PKEY_public_check()
to check RSA public keys may experience long delays. Where the key that
is being checked has been obtained from an untrusted source this may lead
to a Denial of Service.
When function EVP_PKEY_public_check() is called on RSA public keys,
a computation is done to confirm that the RSA modulus, n, is composite.
For valid RSA keys, n is a product of two or more large primes and this
computation completes quickly. However, if n is an overly large prime,
then this computation would take a long time.
An application that calls EVP_PKEY_public_check() and supplies an RSA key
obtained from an untrusted source could be vulnerable to a Denial of Service
attack.
The function EVP_PKEY_public_check() is not called from other OpenSSL
functions however it is called from the OpenSSL pkey command line
application. For that reason that application is also vulnerable if used
with the '-pubin' and '-check' options on untrusted data.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| Issue summary: The DTLS retransmission logic does not correctly handle
a handshake message write that is suspended part-way through.
The retransmitted message can be read past the message buffer and
the retransmission overwrites the internal state the suspended write
needs to resume correctly.
Impact summary: The retransmitted message can disclose a heap memory
to the peer as plaintext handshake data or cause a crash and a Denial
of Service when the read reaches an unmapped memory region.
CWE: CWE-125: Out-of-bounds Read
Description: DTLS handshake messages can be written out in multiple
fragments, and a write can suspend mid-message (returning WANT_WRITE)
if the underlying transport temporarily cannot accept more data. While
such a write is suspended, the DTLS retransmission timer may
independently fire and ask the retransmission logic to resend an
earlier, already-acknowledged-as-sent message from its retransmit
queue.
The retransmission logic reused the same internal buffer and position
tracking as the message that was still being written, without
resetting the position back to the start of the message being
retransmitted. As a result the retransmission was read starting from
wherever the suspended write had left off, producing a mislabelled
message whose body was leftover bytes from the other, larger message
still in flight - content that was never meant to be sent at that
point, and which could run past the end of the allocated buffer.
Separately, even when the retransmission is positioned correctly,
allowing it to run to completion while another write is suspended
overwrites the same shared bookkeeping that the suspended write
depends on to resume. When the application later resumes the
suspended write (via a subsequent SSL_read(), SSL_write(),
SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a
state inconsistent with the message and aborts the process in
a debugging build.
The fix resets the retransmission's read position to the start of the
message before resending, and skips retransmission entirely whenever a
handshake write is still suspended, deferring to the next call that
resumes it instead.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause
memory to be accessed that was previously freed in some situations
Impact summary: A use after free can have a range of potential consequences such
as the corruption of valid data, crashes or execution of arbitrary code.
However, only applications that directly call the SSL_free_buffers function are
affected by this issue. Applications that do not call this function are not
vulnerable. Our investigations indicate that this function is rarely used by
applications.
The SSL_free_buffers function is used to free the internal OpenSSL buffer used
when processing an incoming record from the network. The call is only expected
to succeed if the buffer is not currently in use. However, two scenarios have
been identified where the buffer is freed even when still in use.
The first scenario occurs where a record header has been received from the
network and processed by OpenSSL, but the full record body has not yet arrived.
In this case calling SSL_free_buffers will succeed even though a record has only
been partially processed and the buffer is still in use.
The second scenario occurs where a full record containing application data has
been received and processed by OpenSSL but the application has only read part of
this data. Again a call to SSL_free_buffers will succeed even though the buffer
is still in use.
While these scenarios could occur accidentally during normal operation a
malicious attacker could attempt to engineer a stituation where this occurs.
We are not aware of this issue being actively exploited.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a
server may fail to notice that the server was not authenticated, because
handshakes don't abort as expected when the SSL_VERIFY_PEER verification mode
is set.
Impact summary: TLS and DTLS connections using raw public keys may be
vulnerable to man-in-middle attacks when server authentication failure is not
detected by clients.
RPKs are disabled by default in both TLS clients and TLS servers. The issue
only arises when TLS clients explicitly enable RPK use by the server, and the
server, likewise, enables sending of an RPK instead of an X.509 certificate
chain. The affected clients are those that then rely on the handshake to
fail when the server's RPK fails to match one of the expected public keys,
by setting the verification mode to SSL_VERIFY_PEER.
Clients that enable server-side raw public keys can still find out that raw
public key verification failed by calling SSL_get_verify_result(), and those
that do, and take appropriate action, are not affected. This issue was
introduced in the initial implementation of RPK support in OpenSSL 3.2.
The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Issue summary: Some non-default TLS server configurations can cause unbounded
memory growth when processing TLSv1.3 sessions
Impact summary: An attacker may exploit certain server configurations to trigger
unbounded memory growth that would lead to a Denial of Service
This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is
being used (but not if early_data support is also configured and the default
anti-replay protection is in use). In this case, under certain conditions, the
session cache can get into an incorrect state and it will fail to flush properly
as it fills. The session cache will continue to grow in an unbounded manner. A
malicious client could deliberately create the scenario for this failure to
force a Denial of Service. It may also happen by accident in normal operation.
This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS
clients.
The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL
1.0.2 is also not affected by this issue. |
| A timing-based side-channel flaw exists in the perl-Crypt-OpenSSL-RSA package, which could be sufficient to recover plaintext across a network in a Bleichenbacher-style attack. To achieve successful decryption, an attacker would have to be able to send a large number of trial messages. The vulnerability affects the legacy PKCS#1v1.5 RSA encryption padding mode. |
| A flaw was found in OpenSSL. When configured to use an RSA key with exponent 3, OpenSSL improperly removes PKCS-1 padding before generating a hash. This allows remote attackers to forge PKCS #1 v1.5 signatures. Consequently, OpenSSL may incorrectly verify X.509 and other certificates, leading to a bypass of trust and authentication mechanisms. |
| In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze). |
| The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd). |
| ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for every encryption operation. RFC 7539 specifies that the nonce value (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and front pads the nonce with 0 bytes if it is less than 12 bytes. However it also incorrectly allows a nonce to be set of up to 16 bytes. In this case only the last 12 bytes are significant and any additional leading bytes are ignored. It is a requirement of using this cipher that nonce values are unique. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and integrity attacks. If an application changes the default nonce length to be longer than 12 bytes and then makes a change to the leading bytes of the nonce expecting the new value to be a new unique nonce then such an application could inadvertently encrypt messages with a reused nonce. Additionally the ignored bytes in a long nonce are not covered by the integrity guarantee of this cipher. Any application that relies on the integrity of these ignored leading bytes of a long nonce may be further affected. Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe because no such use sets such a long nonce value. However user applications that use this cipher directly and set a non-default nonce length to be longer than 12 bytes may be vulnerable. OpenSSL versions 1.1.1 and 1.1.0 are affected by this issue. Due to the limited scope of affected deployments this has been assessed as low severity and therefore we are not creating new releases at this time. Fixed in OpenSSL 1.1.1c (Affected 1.1.1-1.1.1b). Fixed in OpenSSL 1.1.0k (Affected 1.1.0-1.1.0j). |
| The OpenSSL RSA Key generation algorithm has been shown to be vulnerable to a cache timing side channel attack. An attacker with sufficient access to mount cache timing attacks during the RSA key generation process could recover the private key. Fixed in OpenSSL 1.1.0i-dev (Affected 1.1.0-1.1.0h). Fixed in OpenSSL 1.0.2p-dev (Affected 1.0.2b-1.0.2o). |