| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Race condition in ip_vs_conn_flush in Linux 2.6 before 2.6.13 and 2.4 before 2.4.32-pre2, when running on SMP systems, allows local users to cause a denial of service (null dereference) by causing a connection timer to expire while the connection table is being flushed before the appropriate lock is acquired. |
| RealNetworks Helix Universal Server 9.0.1 and 9.0.2 allows remote attackers to cause a denial of service (crash) via malformed requests that trigger a null dereference, as demonstrated using (1) GET_PARAMETER or (2) DESCRIBE requests. |
| The uipc system calls (uipc_syscalls.c) in OpenBSD 2.9 and 3.0 provide user mode return instead of versus rval kernel mode values to the fdrelease function, which allows local users to cause a denial of service and trigger a null dereference. |
| IP fragmentation denial of service in FreeBSD allows a remote attacker to cause a crash. |
| mah-jong before 1.6.2 allows remote attackers to cause a denial of service (server crash) via a missing argument, which triggers a null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: Fix RSS LUT NULL ptr issue after soft reset
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip> |
| Null pointer dereference in Windows LDAP - Lightweight Directory Access Protocol allows an unauthorized attacker to deny service over a network. |
| The application does not validate the presence of required appearance (AP) data before accessing stamp annotation resources. When a PDF contains a stamp annotation missing its AP entry, the code continues to dereference the associated object without a prior null or validity check, which allows a crafted document to trigger a null pointer dereference and crash the application, resulting in denial of service. |
| In systemd 260 before 261, a local unprivileged user can trigger an assert via an IPC API call with an array or map that has a null element. |
| Cairo through 1.18.4, as used in Poppler through 25.08.0, has an "unscaled->face == NULL" assertion failure for _cairo_ft_unscaled_font_fini in cairo-ft-font.c. |
| Watchdog Antivirus v1.6.415 is vulnerable to a Denial of Service vulnerability by triggering the 0x80002014 IOCTL code of the wsdk-driver.sys driver. |
| A NULL pointer dereference in the ngap_app::handle_receive routine of OpenAirInterface CN5G AMF (oai-cn5g-amf) up to v2.0.0 allows attackers to cause a Denial of Service (DoS) via a crafted NGAP message. |
| An uninitialized pointer dereference in the ngap_handle_pdu_session_resource_setup_response routine of OpenAirInterface CN5G AMF (oai-cn5g-amf) up to v2.0.0 allows attackers to cause a Denial of Service (DoS) via a crafted PDU Session Resource Setup Response. |
| OpenAirInterface CN5G AMF (oai-cn5g-amf) <= 2.0.0 contains a null dereference in its handling of unsupported NGAP protocol messages which allows an attacker with network-adjacent access to the AMF to carry out denial of service. When a procedure code/presence field tuple is received that is unsupported, OAI indexes into a null function pointer and subsequently dereferences it. |
| An uninitialized pointer dereference in OpenAirInterface CN5G AMF up to v2.0.0 allows attackers to cause a Denial of Service (DoS) via a crafted InitialContextSetupResponse message sent to the AMF. |
| The memory allocation function ACPI_ALLOCATE_ZEROED does not guarantee a
successful allocation, but the subsequent code directly dereferences the
pointer that receives it, which may lead to null pointer dereference.
To fix this issue, a null pointer check should be added. If it is null,
return exception code AE_NO_MEMORY. |
| A vulnerability was found in TRENDnet TEW-411BRP+ 2.07. It has been classified as problematic. Affected is the function sub_401DB0 of the file /usr/sbin/httpd of the component HTTP Request Handler. The manipulation leads to null pointer dereference. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Multiple CWE-476 NULL Pointer Dereference vulnerabilities were found in GoAhead Web Server up to version 6.0.0 when compiled with the ME_GOAHEAD_REPLACE_MALLOC flag. Without a memory notifier for allocation failures, remote attackers can exploit these vulnerabilities by sending malicious requests, leading to a crash and Denial of Service (DoS). |
| CWE-476 NULL Pointer Dereference vulnerability in the evalExpr() function of GoAhead Web Server (version <= 6.0.0) when compiled with the ME_GOAHEAD_JAVASCRIPT flag. This vulnerability allows a remote attacker with the privileges to modify JavaScript template (JST) files to trigger a crash and cause a Denial of Service (DoS) by providing malicious templates. |
