| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Action captions in Vaadin accept HTML by default but were not sanitized, potentially allowing Cross-site Scripting (XSS) if caption content is derived from user input.
In Vaadin Framework 7 and 8, the Action class is a general-purpose class that may be used by multiple components. The fixed versions sanitize captions by default and provide an API to explicitly enable HTML content mode for backwards compatibility.
In Vaadin 23 and newer, the Action class is only used by the Spreadsheet component. The fixed versions sanitize HTML using Jsoup with a relaxed safelist.
Vaadin 14 is not affected as Spreadsheet component was not supported.
Users of affected versions should apply the following mitigation or upgrade. Releases that have fixed this issue include:
Product version
Vaadin 7.0.0 - 7.7.49
Vaadin 8.0.0 - 8.29.1
Vaadin 23.1.0 - 23.6.5
Vaadin 24.0.0 - 24.8.13
Vaadin 24.9.0 - 24.9.6
Mitigation
Upgrade to 7.7.50
Upgrade to 8.30.0
Upgrade to 23.6.6
Upgrade to 24.8.14 or 24.9.7
Upgrade to 25.0.0 or newer
Artifacts Maven coordinatesVulnerable versionsFixed versioncom.vaadin:vaadin-server
7.0.0 - 7.7.49
≥7.7.50
com.vaadin:vaadin-server
8.0.0 - 8.29.1
≥8.30.0
com.vaadin:vaadin
23.1.0 - 23.6.5
≥23.6.6
com.vaadin:vaadin24.0.0 - 24.8.13
≥24.8.14
com.vaadin:vaadin24.9.0 - 24.9.6
≥24.9.7
com.vaadin:vaadin-spreadsheet-flow
23.1.0 - 23.6.5
≥23.6.6
com.vaadin:vaadin-spreadsheet-flow
24.0.0 - 24.8.13
≥24.8.14
com.vaadin:vaadin-spreadsheet-flow
24.9.0 - 24.9.6
≥24.9.7 |
| Use of a weak pseudo-random number generator, which may allow an attacker to read or inject encrypted PowerG packets. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
The acpi_get_first_physical_node() function can return NULL, in which
case the get_device() function also returns NULL, but this value is
then dereferenced without checking,so add a check to prevent a crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix potential out-of-bounds read in iommu_mmio_show
In iommu_mmio_write(), it validates the user-provided offset with the
check: `iommu->dbg_mmio_offset > iommu->mmio_phys_end - 4`.
This assumes a 4-byte access. However, the corresponding
show handler, iommu_mmio_show(), uses readq() to perform an 8-byte
(64-bit) read.
If a user provides an offset equal to `mmio_phys_end - 4`, the check
passes, and will lead to a 4-byte out-of-bounds read.
Fix this by adjusting the boundary check to use sizeof(u64), which
corresponds to the size of the readq() operation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: netpoll: initialize work queue before error checks
Prevent a kernel warning when netconsole setup fails on devices with
IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in
__flush_work) occurs because the cleanup path tries to cancel an
uninitialized work queue.
When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL,
it fails early and calls skb_pool_flush() for cleanup. This function
calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been
initialized yet, triggering the warning.
Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the
work queue is properly initialized before any potential failure points.
This allows the cleanup path to safely cancel the work queue regardless
of where the setup fails. |
| Form.io is a combined Form and API platform for Serverless applications. Versions 3.5.6 and below and 4.0.0-rc.1 through 4.4.2 contain a flaw in path handling which could allow an attacker to access protected API endpoints by sending a crafted request path. An unauthenticated or unauthorized request could retrieve data from endpoints that should be protected. This issue is fixed in versions 3.5.7 and 4.4.3. |
| It is possible to construct a zone such that some queries to it will generate responses containing numerous records in the Additional section. An attacker sending many such queries can cause either the authoritative server itself or an independent resolver to use disproportionate resources processing the queries. Zones will usually need to have been deliberately crafted to attack this exposure.
This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, 9.11.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.32-S1. |
| The WP Statistics plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the URL search parameter in all versions up to, and including, 14.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The /WmAdmin/,/invoke/vm.server/login login page in the Integration Server in Software AG webMethods 10.15.0 before Core_Fix7 allows remote attackers to reach the administration panel and discover hostname and version information by sending an arbitrary username and a blank password to the /WmAdmin/#/login/ URI. |
| SAP GUI for Windows stores user input on the client PC to improve usability. Under very specific circumstances an attacker with administrative privileges or access to the victim�s user directory on the Operating System level would be able to read this data. Depending on the user input provided in transactions, the disclosed data could range from non-critical data to highly sensitive data, causing high impact on confidentiality of the application. |
| An obsolete functionality in SAP NetWeaver Application Server ABAP did not perform necessary authorization checks. Because of this, an authenticated attacker could obtain information that would otherwise be restricted. It has no impact on integrity or availability on the application. |
| GraphQL Java (aka graphql-java) before 21.5 does not properly consider ExecutableNormalizedFields (ENFs) as part of preventing denial of service via introspection queries. 20.9 and 19.11 are also fixed versions. |
| SAP NetWeaver Application Server for ABAP and ABAP Platform allows an authenticated attacker to obtain illegitimate access to the system by exploiting improper authentication checks, resulting in privilege escalation. On successful exploitation, this can result in potential security concerns. This results in a high impact on confidentiality, integrity, and availability. |
| An unauthenticated device registration vulnerability, caused by Improperly Controlled Modification of Dynamically-Determined Object Attributes, has been identified in the MXsecurity Series. An unauthenticated remote attacker can exploit this vulnerability by sending a specially crafted JSON payload to the device's registration endpoint /api/v1/devices/register, allowing the attacker to register unauthorized devices without authentication. Although exploiting this vulnerability has limited modification of data, there is no impact to the confidentiality and availability of the affected device, as well as no loss of confidentiality, integrity, and availability within any subsequent systems. |
| A vulnerability was detected in Chanjet CRM up to 20251121. Affected is an unknown function of the file /tools/jxf_dump_table_demo.php. The manipulation of the argument gblOrgID results in sql injection. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Don't overflow during division for dirty tracking
If pgshift is 63 then BITS_PER_TYPE(*bitmap->bitmap) * pgsize will overflow
to 0 and this triggers divide by 0.
In this case the index should just be 0, so reorganize things to divide
by shift and avoid hitting any overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: pretend $Extend records as regular files
Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()")
requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/
S_IFIFO/S_IFSOCK type, use S_IFREG for $Extend records. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Shutdown FW DMA in bnxt_shutdown()
The netif_close() call in bnxt_shutdown() only stops packet DMA. There
may be FW DMA for trace logging (recently added) that will continue. If
we kexec to a new kernel, the DMA will corrupt memory in the new kernel.
Add bnxt_hwrm_func_drv_unrgtr() to unregister the driver from the FW.
This will stop the FW DMA. In case the call fails, call pcie_flr() to
reset the function and stop the DMA. |
| In affected versions, vulnerability-lookup did not track or limit failed
One-Time Password (OTP) attempts during Two-Factor Authentication (2FA)
verification. An attacker who already knew or guessed a valid username
and password could submit an arbitrary number of OTP codes without
causing the account to be locked or generating any specific alert for
administrators.
This lack of rate-limiting and lockout on OTP failures significantly
lowers the cost of online brute-force attacks against 2FA codes and
increases the risk of successful account takeover, especially if OTP
entropy is reduced (e.g. short numeric codes, user reuse, or predictable
tokens). Additionally, administrators had no direct visibility into
accounts experiencing repeated 2FA failures, making targeted attacks
harder to detect and investigate.
The patch introduces a persistent failed_otp_attempts counter on user
accounts, locks the user after 5 invalid OTP submissions, resets the
counter on successful verification, and surfaces failed 2FA attempts in
the admin user list. This enforces an account lockout policy for OTP
brute-force attempts and improves monitoring capabilities for suspicious
2FA activity.This issue affects Vulnerability-Lookup: before 2.18.0. |
| In affected versions, vulnerability-lookup handled user-controlled
content in comments and bundles in an unsafe way, which could lead to
stored Cross-Site Scripting (XSS).
On the backend, the related_vulnerabilities field of bundles accepted
arbitrary strings without format validation or proper sanitization. On
the frontend, comment and bundle descriptions were converted from
Markdown to HTML and then injected directly into the DOM using string
templates and innerHTML. This combination allowed an attacker who could
create or edit comments or bundles to store crafted HTML/JavaScript
payloads which would later be rendered and executed in the browser of
any user visiting the affected profile page (user.html).
This issue affects Vulnerability-Lookup: before 2.18.0. |