| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets
When the FarSync T-series card is being detached, the fst_card_info is
deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task
may still be running or pending, leading to use-after-free bugs when the
already freed fst_card_info is accessed in fst_process_tx_work_q() or
fst_process_int_work_q().
A typical race condition is depicted below:
CPU 0 (cleanup) | CPU 1 (tasklet)
| fst_start_xmit()
fst_remove_one() | tasklet_schedule()
unregister_hdlc_device()|
| fst_process_tx_work_q() //handler
kfree(card) //free | do_bottom_half_tx()
| card-> //use
The following KASAN trace was captured:
==================================================================
BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00
Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x5d0
? do_bottom_half_tx+0xb88/0xd00
kasan_report+0xb8/0xf0
? do_bottom_half_tx+0xb88/0xd00
do_bottom_half_tx+0xb88/0xd00
? _raw_spin_lock_irqsave+0x85/0xe0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx___hrtimer_run_queues+0x10/0x10
fst_process_tx_work_q+0x67/0x90
tasklet_action_common+0x1fa/0x720
? hrtimer_interrupt+0x31f/0x780
handle_softirqs+0x176/0x530
__irq_exit_rcu+0xab/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
...
Allocated by task 41 on cpu 3 at 72.330843s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
__kasan_kmalloc+0x7f/0x90
fst_add_one+0x1a5/0x1cd0
local_pci_probe+0xdd/0x190
pci_device_probe+0x341/0x480
really_probe+0x1c6/0x6a0
__driver_probe_device+0x248/0x310
driver_probe_device+0x48/0x210
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x101/0x190
__device_attach+0x198/0x3a0
device_initial_probe+0x78/0xa0
pci_bus_add_device+0x81/0xc0
pci_bus_add_devices+0x7e/0x190
enable_slot+0x9b9/0x1130
acpiphp_check_bridge.part.0+0x2e1/0x460
acpiphp_hotplug_notify+0x36c/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
Freed by task 41 on cpu 1 at 75.138639s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x135/0x410
fst_remove_one+0x2ca/0x540
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0x364/0x530
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device+0xd/0x20
disable_slot+0x116/0x260
acpiphp_disable_and_eject_slot+0x4b/0x190
acpiphp_hotplug_notify+0x230/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
The buggy address belongs to the object at ffff88800aad1000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 28 bytes inside of
freed 1024-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x100000000000040(head|node=0|zone=1)
page_type: f5(slab)
raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88800aad1000: fa fb
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: set fileio bio failed in short read case
For file-backed mount, IO requests are handled by vfs_iocb_iter_read().
However, it can be interrupted by SIGKILL, returning the number of
bytes actually copied. Unused folios in bio are unexpectedly marked
as uptodate.
vfs_read
filemap_read
filemap_get_pages
filemap_readahead
erofs_fileio_readahead
erofs_fileio_rq_submit
vfs_iocb_iter_read
filemap_read
filemap_get_pages <= detect signal
erofs_fileio_ki_complete <= set all folios uptodate
This patch addresses this by setting short read bio with an error
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/sva: Fix crash in iommu_sva_unbind_device()
domain->mm->iommu_mm can be freed by iommu_domain_free():
iommu_domain_free()
mmdrop()
__mmdrop()
mm_pasid_drop()
After iommu_domain_free() returns, accessing domain->mm->iommu_mm may
dereference a freed mm structure, leading to a crash.
Fix this by moving the code that accesses domain->mm->iommu_mm to before
the call to iommu_domain_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Move event pointer setup earlier in x86_pmu_enable()
A production AMD EPYC system crashed with a NULL pointer dereference
in the PMU NMI handler:
BUG: kernel NULL pointer dereference, address: 0000000000000198
RIP: x86_perf_event_update+0xc/0xa0
Call Trace:
<NMI>
amd_pmu_v2_handle_irq+0x1a6/0x390
perf_event_nmi_handler+0x24/0x40
The faulting instruction is `cmpq $0x0, 0x198(%rdi)` with RDI=0,
corresponding to the `if (unlikely(!hwc->event_base))` check in
x86_perf_event_update() where hwc = &event->hw and event is NULL.
drgn inspection of the vmcore on CPU 106 showed a mismatch between
cpuc->active_mask and cpuc->events[]:
active_mask: 0x1e (bits 1, 2, 3, 4)
events[1]: 0xff1100136cbd4f38 (valid)
events[2]: 0x0 (NULL, but active_mask bit 2 set)
events[3]: 0xff1100076fd2cf38 (valid)
events[4]: 0xff1100079e990a90 (valid)
The event that should occupy events[2] was found in event_list[2]
with hw.idx=2 and hw.state=0x0, confirming x86_pmu_start() had run
(which clears hw.state and sets active_mask) but events[2] was
never populated.
Another event (event_list[0]) had hw.state=0x7 (STOPPED|UPTODATE|ARCH),
showing it was stopped when the PMU rescheduled events, confirming the
throttle-then-reschedule sequence occurred.
The root cause is commit 7e772a93eb61 ("perf/x86: Fix NULL event access
and potential PEBS record loss") which moved the cpuc->events[idx]
assignment out of x86_pmu_start() and into step 2 of x86_pmu_enable(),
after the PERF_HES_ARCH check. This broke any path that calls
pmu->start() without going through x86_pmu_enable() -- specifically
the unthrottle path:
perf_adjust_freq_unthr_events()
-> perf_event_unthrottle_group()
-> perf_event_unthrottle()
-> event->pmu->start(event, 0)
-> x86_pmu_start() // sets active_mask but not events[]
The race sequence is:
1. A group of perf events overflows, triggering group throttle via
perf_event_throttle_group(). All events are stopped: active_mask
bits cleared, events[] preserved (x86_pmu_stop no longer clears
events[] after commit 7e772a93eb61).
2. While still throttled (PERF_HES_STOPPED), x86_pmu_enable() runs
due to other scheduling activity. Stopped events that need to
move counters get PERF_HES_ARCH set and events[old_idx] cleared.
In step 2 of x86_pmu_enable(), PERF_HES_ARCH causes these events
to be skipped -- events[new_idx] is never set.
3. The timer tick unthrottles the group via pmu->start(). Since
commit 7e772a93eb61 removed the events[] assignment from
x86_pmu_start(), active_mask[new_idx] is set but events[new_idx]
remains NULL.
4. A PMC overflow NMI fires. The handler iterates active counters,
finds active_mask[2] set, reads events[2] which is NULL, and
crashes dereferencing it.
Move the cpuc->events[hwc->idx] assignment in x86_pmu_enable() to
before the PERF_HES_ARCH check, so that events[] is populated even
for events that are not immediately started. This ensures the
unthrottle path via pmu->start() always finds a valid event pointer. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 38.8.6, 39.8.0, 40.7.0, and 41.0.0-beta.8, apps that register an asynchronous session.setPermissionRequestHandler() may be vulnerable to a use-after-free when handling fullscreen, pointer-lock, or keyboard-lock permission requests. If the requesting frame navigates or the window closes while the permission handler is pending, invoking the stored callback dereferences freed memory, which may lead to a crash or memory corruption. Apps that do not set a permission request handler, or whose handler responds synchronously, are not affected. This issue has been patched in versions 38.8.6, 39.8.0, 40.7.0, and 41.0.0-beta.8. |
| A race condition existed in nsHttpTransaction that could have been exploited to cause memory corruption, potentially leading to an exploitable condition. This vulnerability was fixed in Firefox 137.0.2. |
| Race condition in signal handling routine in ftpd, allowing read/write arbitrary files. |
| Race condition, use-after-free in the Graphics: WebRender component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. |
| Strapi is an open source headless content management system. Strapi versions prior to 5.20.0 contain a CORS misconfiguration vulnerability in default installations. By default, Strapi reflects the value of the Origin header back in the Access-Control-Allow-Origin response header without proper validation or whitelisting. This allows an attacker-controlled site to send credentialed requests to the Strapi backend. An attacker can exploit this by hosting a malicious site on a different origin (e.g., different port) and sending requests with credentials to the Strapi API. The vulnerability is fixed in version 5.20.0. No known workarounds exist. |
| When manipulating user events in nested loops while opening a document through script, it is possible to trigger a potentially exploitable crash due to poor event handling. This vulnerability affects Firefox < 63, Firefox ESR < 60.3, and Thunderbird < 60.3. |
| In Eclipse OpenJ9 before version 0.41.0, the JVM can be forced into an infinite busy hang on a spinlock or a segmentation fault if a shutdown signal (SIGTERM, SIGINT or SIGHUP) is received before the JVM has finished initializing.
|
| The signal handler implementations in socat before 1.7.3.0 and 2.0.0-b8 allow remote attackers to cause a denial of service (process freeze or crash). |
| GNOME Display Manager (gdm) before 3.18.2 allows physically proximate attackers to bypass the lock screen by holding the Escape key. |
| Signal Handler Race Condition vulnerability in Mitsubishi Electric India GC-ENET-COM whose first 2 digits of 11-digit serial number of unit are "16" allows a remote unauthenticated attacker to cause a denial-of-service (DoS) condition in Ethernet communication by sending a large number of specially crafted packets to any UDP port when GC-ENET-COM is configured as a Modbus TCP Server. The communication resumes only when the power of the main unit is turned off and on or when the GC-ENET-COM is hot-swapped from the main unit.
|
| A signal handler in sshd(8) may call a logging function that is not async-signal-safe. The signal handler is invoked when a client does not authenticate within the LoginGraceTime seconds (120 by default). This signal handler executes in the context of the sshd(8)'s privileged code, which is not sandboxed and runs with full root privileges.
This issue is another instance of the problem in CVE-2024-6387 addressed by FreeBSD-SA-24:04.openssh. The faulty code in this case is from the integration of blacklistd in OpenSSH in FreeBSD.
As a result of calling functions that are not async-signal-safe in the privileged sshd(8) context, a race condition exists that a determined attacker may be able to exploit to allow an unauthenticated remote code execution as root. |
| It was found that the issue for security flaw CVE-2019-3805 appeared again in a further version of JBoss Enterprise Application Platform - Continuous Delivery (EAP-CD) introducing regression. An attacker could exploit this by modifying the PID file in /var/run/jboss-eap/ allowing the init.d script to terminate any process as root. |
| A flaw was discovered in wildfly versions up to 16.0.0.Final that would allow local users who are able to execute init.d script to terminate arbitrary processes on the system. An attacker could exploit this by modifying the PID file in /var/run/jboss-eap/ allowing the init.d script to terminate any process as root. |
| An issue was discovered in GNOME gvfs 1.29.4 through 1.41.2. daemon/gvfsbackendadmin.c has race conditions because the admin backend doesn't implement query_info_on_read/write. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |