| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in ib_free_cq()
When accessing a CQ via the netlink path the only synchronization
mechanism for the said CQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_free_cq(), which is too late, since by that point
vendor-specific resources associated with the CQ might already be
freed. This can leave a short window where the CQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_del() call to be before the freeing
of the vendor-specific resources ensuring that the CQ is removed from
restrack before its internal resources are released.
This guarantees that no new users hold references to a CQ that is in
the process of destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in ib_destroy_srq_user()
When accessing a SRQ via the netlink path the only synchronization
mechanism for the said SRQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_destroy_srq_user(), which is too late, since by that point
vendor-specific resources associated with the SRQ might already be
freed. This can leave a short window where the SRQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
ib_destroy_srq_user(), ensuring that the SRQ is removed from restrack
before its internal resources are released. This guarantees that no new
users hold references to a SRQ that is in the process of destruction.
In addition, this change preserves the intended inverted order
between create and destroy routines: resources are added to
restrack at the end of successful creation, and hence shall be removed
from the restrack first thing during the destruction flow, which keeps
the lifecycle management consistent and predictable. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix kernel stack corruption in tailcall with CFI
When CONFIG_CFI_CLANG is enabled, prog->bpf_func already skips the kcfi
instruction during setup. Including it again in the tailcall jump offset
causes it to jump over an extra 4 bytes, skipping the stack pointer
adjustment, which will result in kernel stack corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[]
For a user QP, qp->sq.queue is a ring the application writes directly,
so rxe_post_send() takes the is_user branch and only schedules send_task
without validating the WQE. rxe_requester() consumes it in place via
req_next_wqe() and calls copy_data(), which indexes
&wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge.
Only the kernel path bounds num_sge (validate_send_wr()); the user WQE
is never checked, so a local unprivileged user can post a WQE with an
out-of-range cur_sge or oversized num_sge and force an out-of-bounds
read of the per-WQE sge array in copy_data() (vmalloc OOB read, local
DoS).
Bound num_sge to qp->sq.max_sge in rxe_requester() before use, the way
get_srq_wqe() already guards SRQ entries, and bound cur_sge only when
the WQE carries payload (dma.resid): copy_data() returns early on a
zero-length copy before touching dma->sge[], so a zero-payload WQE --
the only kind a max_sge == 0 QP can post -- stays valid.
Reproduced under KASAN; the vmalloc-out-of-bounds in copy_data() is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: check SAP message length before reading it
Verify the SAP message size is not larger than the local buffer before
reading the message to avoid buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/fsdev: use __va(phys) for kaddr in direct_access
Use __va(phys) instead of virt_addr + linear_offset for the kaddr
return in __fsdev_dax_direct_access(). The previous code added a
device-linear byte offset to virt_addr (which is __va of ranges[0]),
but for multi-range devices with physical gaps between ranges, this
linear arithmetic crosses the gap and produces a wrong kernel virtual
address. Using __va(phys) where phys comes from dax_pgoff_to_phys()
is correct for any range layout because the direct map translates
each physical address independently.
This leaves dev_dax->virt_addr write-only, so remove the field
(suggested by Dave Jiang). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Reject Get Feature count larger than the output buffer
cxlctl_get_feature() sizes its output buffer from the user's
fwctl_rpc.out_len, but the device is told to write
cxl_mbox_get_feat_in.count bytes into rpc_out->payload, which is a
separate user-controlled value. Nothing bounds count against out_len, so
a small out_len with a large count overflows the kvzalloc()'d buffer.
A heap OOB write reachable from FWCTL_RPC.
Reject requests where count exceeds the available payload room, before
allocating. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Require a BPF cpumask for bpf_cpumask_populate()
bpf_cpumask_populate() writes to its destination with bitmap_copy(), but
the destination is typed as struct cpumask *. That allows the verifier to
accept borrowed cpumask pointers returned by read-only kfuncs, such as
scx_bpf_get_online_cpumask(), as a writable destination.
Make the destination a struct bpf_cpumask * so populate follows the same
ownership rule as the other mutating cpumask kfuncs. Query kfuncs continue
to accept const struct cpumask * inputs. |
| Use after free in PDFium in Google Chrome prior to 153.0.8010.52 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to bypass security restrictions due to improper authorization. |
| IBM Guardium Data Protection 12.2 could allow a remote attacker to bypass security restrictions due to improper certificate validation. |
| Keycloak is an open-source identity and access management solution. A vulnerability was discovered where a user with the impersonation role can impersonate a realm administrator. This allows the attacker to gain full administrative control over the realm, including the ability to manage users, clients, and roles. |
| CoreDNS is a DNS server written in Go. Prior to 1.14.7, the DNS-over-HTTPS, DNS-over-HTTP/3, DNS-over-QUIC, and DNS-over-gRPC listeners in plugin/pkg/doh/doh.go, core/dnsserver/server_quic.go, and core/dnsserver/server_grpc.go call dns.Msg.Unpack without the dns.DefaultMsgAcceptFunc request policy used by UDP, TCP, and DNS-over-TLS. An unauthenticated client can send an RFC 2136 UPDATE that the proxy or forward plugin passes unchanged to an update-capable upstream. If that upstream trusts CoreDNS's source address or connection and does not require an attacker-unknown end-to-end TSIG, the request appears to originate from CoreDNS and can add, replace, or delete DNS records, redirect traffic, take over names, alter mail routing, or disrupt the writable zone. This issue is fixed in version 1.14.7. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.12, SHCParser in org.hl7.fhir.r5/src/main/java/org/hl7/fhir/r5/elementmodel/SHCParser.java can consume attacker-controlled Smart Health Card JWT content whose header contains zip: "DEF" and whose small raw-DEFLATE payload expands to a very large value. SHCParser.decodeJWT() passes the decoded payload to SHCParser.inflate(), which accumulates all decompressed bytes in a ByteArrayOutputStream without an output-size limit before JSON parsing, and SHCParser.decompress() contains the same unbounded pattern. An application or validator service that accepts attacker-supplied SHC content can therefore suffer excessive heap allocation, severe garbage-collection pressure, request failure, process instability, or process termination. This issue is fixed in version 6.9.12. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.12, SHCParser in org.hl7.fhir.r5/src/main/java/org/hl7/fhir/r5/elementmodel/SHCParser.java can enter an infinite loop while processing attacker-controlled Smart Health Card JWT content whose header contains zip: "DEF" and whose raw-DEFLATE payload is empty or truncated. SHCParser.decodeJWT() reaches SHCParser.inflate(), where Inflater.inflate() can return zero while Inflater.finished() remains false and Inflater.needsInput() is true. The loop also lacks an Inflater.needsDictionary() termination check, SHCParser.decompress() contains the same zero-progress pattern, and ResourceChecker.java can reach SHC parsing during file-format detection. A malformed validation request can pin a JVM worker thread indefinitely, and concurrent requests can exhaust all validation workers. This issue is fixed in version 6.9.12. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Nexus Dashboard engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20361 are related to SQL injection issues that are grouped under the Common Weakness Enumeration (CWE) CWE-89. |
| A vulnerability in the sftunnel inter-device communication protocol of Cisco Secure FMC Software and Cisco Secure FTD Software could allow an unauthenticated, remote attacker to exhaust the available memory of an affected device.
This vulnerability is due to improper management of memory resources during sftunnel TLS connection setup. An attacker could exploit this vulnerability by sending crafted sftunnel TLS frames to an affected device during the connection setup. A successful exploit could allow the attacker to exhaust the available memory on the affected device, which could result in a DoS condition. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20335 are related to incorrect calculation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-682. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Nexus Dashboard engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76409 are related to improper limitation of a pathname issues that are grouped under the Common Weakness Enumeration (CWE) CWE-22. |
| A vulnerability in Cisco Secure FMC Software could allow an authenticated, remote attacker to execute arbitrary commands at the root privilege level.
This vulnerability is due to unsecured deserialization of web-management user-controlled data. An attacker could exploit this vulnerability by authenticating to the device and sending a crafted HTTP payload. A successful exploit could allow the attacker to save the crafted payload and then execute it on the underlying operating system as root.
To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Security Analyst (read-only). |
