| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Allocation of Resources Without Limits or Throttling, Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in Apache Thrift C++ bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close()
acp6x_pdm_dma_close() does not free the runtime->private_data buffer
allocated in acp6x_pdm_dma_open(). Add the missing kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error cases where tgtdev is still NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmr: account multicast table and route memory
A netadmin in a user+net namespace can create many IPv4 and IPv6
multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen
id allocates an mr_table via the shared mr_table_alloc(), links it
into the per-net list, and leaves it until netns teardown. Those
objects were not charged to memcg, so the host unreclaimable slab
grows with the table count.
Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the
IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established
handling of IP addresses, routes and alternate interface names.
Unresolved MFC entries are still allocated from softIRQ with
GFP_ATOMIC and are not charged. They expire after 10 seconds and are
bounded by the socket receive queue; see commit 0079ad8e8dc3
("ipmr: remove hard code cache_resolve_queue_len limit"). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the field rejected for a bad modifier
Writing a hist trigger whose value or variable carries a modifier that is
not allowed there leaks the fields that were built for it.
__create_val_field() takes the field from parse_expr() and stores it in
hist_data->fields[] only after the modifier checks have run:
hist_field = parse_expr(hist_data, file, field_str, flags, var_name,
&n_subexprs);
...
if (hist_field->flags & HIST_FIELD_FL_VAR) {
if (hist_field->flags & (...))
goto err;
} else {
if (hist_field->flags & (...))
goto err;
}
hist_data->fields[val_idx] = hist_field;
Both checks jump past that store, and the err label returns without
freeing anything. The error unwinds to create_hist_data(), which calls
destroy_hist_data() -> destroy_hist_fields(), and that reaches a field
only by walking fields[]. A field that never got there is unreachable.
commit e0213434fe3e ("tracing: Do not let histogram values have some
modifiers") set ret to -EINVAL and fell through to the store, which left
the field owned by fields[] and freed along with the rest of hist_data.
Splitting the check into a value case and a variable case replaced that
fall-through with a goto that skips it.
With CONFIG_DEBUG_KMEMLEAK, 200 writes of
# echo 'hist:keys=prev_pid:vals=next_pid.log2' > \
events/sched/sched_switch/trigger
each correctly rejected with -EINVAL, leave 332 unreferenced objects
(63744 bytes) reported at create_hist_field(); 200 install and remove
cycles of a valid trigger leave none. A '.log2' field is two
allocations, since create_hist_field() puts the plain field in
operands[0] of the log2 field, and both are reported.
Use destroy_hist_field() rather than __destroy_hist_field() so that
operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF,
which is what an operand owned by hist_data->var_refs[] needs; the
rejected field itself is never a var ref, because a var ref never carries
a modifier flag. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: bound automatic table ID allocation
fib_empty_table() probes every table ID from 1 until it finds a
free one. IPv4 tables are stored in a 256-bucket hash table, so a
dense set of IDs makes each probe walk a growing hash chain while
RTNL is held.
Automatic table assignment ("ip rule ... table 0") is an IPv4-only
legacy path. Bound the automatically allocated ID to 4096 so the
RTNL hold stays bounded, without changing lookups of explicitly
specified table IDs.
This changes user-visible behavior. A table-0 rule previously
received the lowest free ID in 1..RT_TABLE_MAX (0xFFFFFFFF). After
this patch the search stops at 4096 and the rule add fails with
ENOBUFS if that range is fully occupied. Explicit table IDs above
4096 remain usable.
The automatic path is unused in practice: it is IPv4-only, not
documented by ip-rule, uncovered by kernel selftests, and both
NetworkManager and systemd refuse table 0. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Add timeout while stop_streaming
When stop_streaming is called, an infinite loop may occur in some cases.
Add a bounded poll of the queue status: loop until the queues drain,
sleeping briefly between polls, and bail out once VPU_DEC_STOP_TIMEOUT
elapses. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hyperv: streamline driver probe to avoid devres issues
It was found that unloading 'hid_hyperv' module results in a devres
complaint:
...
hv_vmbus: unregistering driver hid_hyperv
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0
...
Call Trace:
<TASK>
? devres_release_group+0x1f2/0x2c0
? __warn+0xd1/0x1c0
? devres_release_group+0x1f2/0x2c0
? report_bug+0x32a/0x3c0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? devres_release_group+0x1f2/0x2c0
? devres_release_group+0x90/0x2c0
? rcu_is_watching+0x15/0xb0
? __pfx_devres_release_group+0x10/0x10
hid_device_remove+0xf5/0x220
device_release_driver_internal+0x371/0x540
? klist_put+0xf3/0x170
bus_remove_device+0x1f1/0x3f0
device_del+0x33f/0x8c0
? __pfx_device_del+0x10/0x10
? cleanup_srcu_struct+0x337/0x500
hid_destroy_device+0xc8/0x130
mousevsc_remove+0xd2/0x1d0 [hid_hyperv]
device_release_driver_internal+0x371/0x540
driver_detach+0xc5/0x180
bus_remove_driver+0x11e/0x2a0
? __mutex_unlock_slowpath+0x160/0x5e0
vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus]
...
And the issue seems to be that the corresponding devres group is not
allocated. Normally, devres_open_group() is called from
__hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver'
with 'mousevsc_hid_driver' stub and basically re-implements
__hid_device_probe() by calling hid_parse() and hid_hw_start() but not
devres_open_group(). hid_device_probe() does not call __hid_device_probe()
for it. Later, when the driver is removed, hid_device_remove() calls
devres_release_group() as it doesn't check whether hdev->driver was
initially overridden or not.
The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure
timely release of driver-allocated resources") but the commit itself seems
to be correct.
Fix the issue by dropping the 'hid_dev->driver' override and using
hid_register_driver()/hid_unregister_driver() instead. Alternatively, it
would have been possible to rely on the default handling but
HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work
for mousevsc as-is. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: delete timer and free skb queue when unloading
Fix possible crash and memory leak on driver unload by deleting
TX purge timer and freeing C2H queue in 'rtw_core_deinit()',
shrink critical section in the latter by freeing COEX queue
out of TX report lock scope. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/habanalabs: postpone mem_mgr IDR destruction to hpriv_release()
The memory manager IDR is currently destroyed when user releases the
file descriptor.
However, at this point the user context might be still held, and memory
buffers might be still in use.
Later on, calls to release those buffers will fail due to not finding
their handles in the IDR, leading to a memory leak.
To avoid this leak, split the IDR destruction from the memory manager
fini, and postpone it to hpriv_release() when there is no user context
and no buffers are used. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain a denial-of-service vulnerability in the QPACK prefixed-integer decoder (QpackUtil.decodePrefixedInteger), which does not bound the number of continuation bytes it will process. A remote, unauthenticated peer can open a QPACK unidirectional stream (type 0x02 encoder or 0x03 decoder) and send a first byte with all prefix bits set (e.g. 0xFF for a 7-bit prefix or 0x3F for a 5-bit prefix) followed by an endless run of 0x80 continuation bytes. The decoder returns -1 ('need more bytes'), so callers never consume the input, the ByteToMessageDecoder cumulator grows without bound, and each decode() invocation re-scans the whole accumulated buffer, yielding O(N^2) CPU cost. The result is unbounded per-connection heap growth (OutOfMemoryError) and event-loop CPU starvation, reachable in every configuration. Fixed in 4.2.18.Final. |
| CNCF Envoy through 1.13.0 may consume excessive amounts of memory when proxying HTTP/1.1 requests or responses with many small (i.e. 1 byte) chunks. |
| CNCF Envoy through 1.13.0 may consume excessive amounts of memory when responding internally to pipelined requests. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix tree connection leak in smb2_tree_connect()
See the procedure below:
smb2_tree_connect
ksmbd_tree_conn_connect
xa_store(&sess->tree_conns, tree_conn->id, tree_conn)
ksmbd_counter_inc(KSMBD_COUNTER_TREE_CONNS)
ksmbd_share_tree_conn_inc(sc)
ksmbd_iov_pin_rsp // fail
status.ret = KSMBD_TREE_CONN_STATUS_NOMEM
// do not disconnect tree_conn
Disconnect the new tree connection if ksmbd_iov_pin_rsp() fails. |
| vLLM is an inference and serving engine for large language models. Prior to 0.26.0, the /v1/completions/derender and /v1/chat/completions/derender endpoints accept caller-supplied GenerateResponse objects whose generate_responses, choices, token_ids, prompt_logprobs, logprobs.content, top_logprobs, and routed_experts structures are processed by OnlineDerenderer and tokenizer.decode before max_model_len, max_tokens, max_num_seqs, or response-size limits are enforced, allowing an authenticated API client to consume excessive CPU and memory and produce oversized responses. This issue is fixed in version 0.26.0. |
| A flaw was found in 389-ds-base. An unauthenticated remote attacker can send a complete LDAP operation followed by the first bytes of an incomplete LDAPMessage on the same connection, causing the server to hand that connection to a second worker thread before the first worker's result is flushed. The second worker blocks until nsslapd-ioblocktimeout while holding the connection mutex, preventing delivery of the completed operation's result. Repeating this across a small number of connections proportional to the configured worker-thread pool size exhausts the entire pool under default configuration, denying service to all clients (anonymous and authenticated, plaintext and TLS) for as long as the attacker maintains the connections. |
| Inefficient regular expression complexity, Inefficient Algorithmic Complexity vulnerability in Apache Thrift Lua bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Inefficient Algorithmic Complexity vulnerability in Apache Thrift Perl bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Inefficient Algorithmic Complexity vulnerability in Apache Thrift Lua bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
