| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The SellKit WordPress plugin before 2.8.0 does not validate a client-supplied product price when totals are recalculated during checkout, allowing unauthenticated attackers to place orders for any purchasable product at a price of their own choosing. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix maximum allowed access checks
The DACL permission check looks for an ACE matching the current user and
falls back to the Everyone ACE. It does not consider an Authenticated
Users ACE, even though an authenticated session is a member of that
well-known group.
As a result, opening a file whose access is granted through S-1-5-11 can
incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users
ACE as a fallback entry alongside Everyone.
The maximal access calculation also combines access masks from every ACE,
regardless of whether its SID applies to the current user. This can grant
rights belonging to an unrelated principal. Process only ACEs applying to
the user, Everyone, or Authenticated Users, and accumulate allowed and
denied masks in ACL order. Preserve explicitly requested access bits so
they are validated against the resulting maximal mask.
When ACCESS_SYSTEM_SECURITY is denied, report STATUS_PRIVILEGE_NOT_HELD
instead of the generic STATUS_ACCESS_DENIED. Access to the system ACL
requires a security privilege that ksmbd does not grant.
For regular files, include FILE_EXECUTE in maximal access when the client
requested GENERIC_EXECUTE and the DACL grants the complete file-read set.
Keep a direct FILE_EXECUTE request subject to the explicit DACL bit. This
matches the POSIX file ACL mapping without broadening specific execute
requests.
Do not replace rights from an applicable NT ACE with a POSIX ACL entry.
The POSIX ACL is only a fallback when no user, Everyone, or Authenticated
Users ACE applies; otherwise it can incorrectly broaden the stored DACL.
This fixes smb2.maximum_allowed.maximum_allowed. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3
The changes introduced to handle single power domain platforms have
swapped the info pointer increment from num_pd_vregs to num_pds, which
would shift the info pointer past the end of the array for pronto-v3,
which does not list power domain regulators in vregs.
This showed up as a difference between GCC- and LLVM-compiled kernels
on SDM632 devices, where only with LLVM one would get the
"regulator request with no identifier" error, because the out-of-bounds
memory ended up being zeroed. Fix by skipping the increment when there
are more power domains than regulators. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/xive: propagate IPI init errors to prevent use-after-free
When xive_init_ipis() fails (e.g. irq_domain_alloc_irqs() fails),
the error path frees the global xive_ipis array. However,
xive_smp_probe() previously ignored this failure and proceeded to
call xive_setup_cpu_ipi(), which dereferences the already-freed
xive_ipis pointer -- a use-after-free.
Now that xive_smp_probe() returns int (previous patch), propagate
the error from xive_init_ipis() and xive_setup_cpu_ipi() through
xive_smp_probe(). Check the return value in both pnv_smp_probe()
and pSeries_smp_probe() so that IPI setup is aborted cleanly on
failure, avoiding the use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: make sure EXTENT_BUFFER_READING is cleared under refs_lock
[FALSE ALERTS]
There is a bug report that the warning inside
invalidate_and_check_btree_folios() got triggered during btrfs/298:
BTRFS info (device sdd): first mount of filesystem f9bf732a-a19b-44b9-99a7-614ddff168e2
BTRFS info (device sdd): using crc32c checksum algorithm
BTRFS error (device sdd): failed to find fsid cb2fdb42-b638-4f2f-badd-4127467ba674 when attempting to open seed devices
BTRFS error (device sdd): failed to read chunk tree: -2
------------[ cut here ]------------
WARNING: disk-io.c:3342 at invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs], CPU#4: mount/125993
CPU: 4 UID: 0 PID: 125993 Comm: mount Tainted: G W OE 7.1.0-rc7-custom+ #1 PREEMPT(full)
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025
Call trace:
invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs] (P)
open_ctree+0x1f50/0x23b0 [btrfs]
btrfs_get_tree+0x89c/0xc48 [btrfs]
vfs_get_tree+0x30/0x110
vfs_cmd_create+0x58/0xe8
__arm64_sys_fsconfig+0x39c/0x518
invoke_syscall.constprop.0+0x48/0x120
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x50/0x310
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
---[ end trace 0000000000000000 ]---
BTRFS warning (device sdd): unable to release extent buffer 365985792 owner 3 gen 17 refs 3 flags 0x5
[CAUSE]
In that invalidate_and_check_btree_folios() we wait for the eb to finish
its read, then check if it's only held by us and the btree inode.
If not, then do a warning as it may be still held, and could cause
problems.
But there is a small window where the check can lead to false alerts:
Thread A (Read endio) | Thread B (Unmount)
----------------------------------+-------------------------------------
end_bbio_meta_read() |
| The eb has one extra ref held |
| by the reader, and has |
| EXTENT_BUFFER_READING flag set | invalidate_and_check_btree_folios()
| | |
|- clear_extent_buffer_reading() | |
| | |- wait_on_bit_io();
| | | The EXTENT_BUFFER_READING flag is
| | | cleared
| | |- if (refcount_read(eb->refs) > 2)
| | The eb is held by the read, us
| | and btree inode, thus it
| | will trigger the warning
|- free_extent_buffer() |
[FIX]
Introduce a helper, free_extent_buffer_clear_reading().
If the new parameter, @clear_reading, is set, we will hold the spinlock
at the beginning of free_extent_buffer_clear_reading() to make sure the
EXTENT_BUFFER_READING flag is cleared inside the same critical section
of decreasing refs.
Now free_extent_buffer() will just call
free_extent_buffer_clear_reading() with @clear_reading set to false, so
no behavior change.
But for end_bbio_meta_read(), it will not clear_extent_buffer_reading()
directly, but pass @clear_reading as true.
Then inside invalidate_and_check_btree_folios(), hold the refs_lock
before reading refs.
So that we eliminate the race window completely. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: bus: Introduce acpi_bus_get_primary_device()
The function used for obtaining the first "physical" device for which
the given ACPI one is the ACPI companion, acpi_get_first_physical_node(),
may return a stale device pointer (mostly in theory) because
acpi_unbind_one() may run as a whole after dropping the ACPI device's
physical_node_lock in acpi_get_first_physical_node() and before it
returns. The last reference to the "physical" device may be dropped
then before the pointer to it is returned to the caller.
If that happens and the acpi_get_first_physical_node() caller invokes
get_device() on the pointer obtained from it, which is done by the
majority of its callers, a use-after-free will occur.
To prepare for addressing this problem, introduce a new function for
getting the first "physical" device associated with the given ACPI one
(the "primary physical device") that will also reference count the
device in question before returning a pointer to it.
Make that new function and acpi_get_first_physical_node() share the
physical node list lookup code.
No intentional functional impact. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: don't WARN on kernel job timeout when device already wedged
igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2
(UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind,
a GSC proxy kernel submission can still time out; with the device wedged
and the GuC CT stopped it can never complete, so its kernel job times out.
Tile0: GT1: Kernel-submitted job timed out
WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:...
at guc_exec_queue_timedout_job()
Workqueue: gt-ordered-wq drm_sched_job_timedout
Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even
though the device is already wedged. The timeout handler then treats the
kernel queue timeout as unexpected and taints the kernel.
Honour an already-wedged device even for killed queues so the expected
teardown timeout no longer trips the WARN.
(cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/secretmem: properly account locked pages
secretmem accounts folios by treating memory as if it were mlock()'d and
thus limited by the RLIMIT_MEMLOCK limit.
However the folios are unevictable and remain so until the inode is
evicted, eliminating usual mlock() semantics - mapping folios then
unmapping them does not clear their unevictable state, since it depends on
AS_UNEVICTABLE, not PG_mlocked.
A user can therefore easily work around the RLIMIT_MEMLOCK limit - simply
map then unmap and VmLck no longer counts the secretmem range. Worse,
folios are not accounted in the process's RSS, meaning the OOM killer
won't know to kill the process.
Repeatedly mapping/unmapping (or forking) can then result in the
consumption of all available system memory with unevictable folios and
cause system instability.
A secretmem fd can be passed between processes and over fork so a
per-process limit simply does not make sense, so follow the precedent set
by io_uring, perf, skbuff, iommufd and xdp by tracking the number of
locked pages in user_struct->locked_vm.
Since the scope tracked is actually inode lifetime, the RLIMIT_MEMLOCK
applies per-user not per-process, so it doesn't make sense to bypass for
users with CAP_IPC_LOCK, therefore remove this bypass.
There is simply no reason to carry on marking the mapping as mlock()'d
since it's misleading and the lifecycle is now correctly handled, so
remove this too.
Note that secretmem does not support any form of truncation (including
hole punching) and the folios are unreclaimable, so the folios need only
be accounted on fault and unaccounted on inode destruction.
__secretmem_account_pages() is more or less a duplicate of the code that
io_uring etc. use, but since this is a bug fix that needs backporting,
defer any de-duplication efforts to a follow-up.
test_mlock_limit() asserts mlock_future_ok() on mmap(), however this has
been removed, so remove the test altogether for the fix. A new test will
be sent separately for upstream. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: convert nfsd_net boolean flags to unsigned long flags word
nfsd_net contains several boolean fields that are accessed from
concurrent contexts without serialization. In particular,
nfsd4_end_grace() guards its drain path with a plain bool:
if (nn->grace_ended)
return;
nn->grace_ended = true;
The read and the write are independent, and nothing in struct
nfsd_net serializes them. At least two contexts can reach this
code with no lock held:
laundromat path
laundry_wq kworker
nfs4_laundromat()
nfsd4_end_grace()
RECLAIM_COMPLETE path
nfsd compound kthread
nfsd4_reclaim_complete()
inc_reclaim_complete()
nfsd4_end_grace()
Both callers can observe grace_ended == false on different CPUs,
both store true, and both proceed into nfsd4_record_grace_done(),
which invokes the active client_tracking_ops->grace_done callback.
For tracking ops that drain reclaim_str_hashtbl (legacy_tracking_ops
via nfsd4_recdir_purge_old, and the cld v1+ ops via
nfsd4_cld_grace_done), grace_done calls nfs4_release_reclaim(),
which walks every bucket of reclaim_str_hashtbl with no lock and
calls nfs4_remove_reclaim_record() (list_del + kfree) on each
entry. Two concurrent walkers corrupt the list and double-free
every nfs4_client_reclaim. A concurrent nfsd4_find_reclaim_client()
iterating the same bucket reads through freed memory.
A third call site exists in nfs4_state_start_net() on the
skip_grace startup path, but it runs under nfsd_mutex before any
client has connected and before the laundromat's first delayed
work fires, so it cannot race with the two callers above.
Replace the scattered boolean fields in nfsd_net with a single
unsigned long flags word and an enum nfsd_net_flag for the bit
positions. The grace_ended race is fixed by using
test_and_set_bit(), which is atomic on all architectures. The
remaining flags (grace_end_forced, in_grace, somebody_reclaimed,
track_reclaim_completes, nfsd_net_up, lockd_up) are converted to
use test_bit/set_bit/clear_bit for consistency. This avoids
sub-word cmpxchg issues on architectures like Hexagon that only
support word-sized atomic operations. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate seg_id fields from persistent memory
cache_pos_decode(), cache_key_decode() and the last-kset branches of
cache_replay(), the writeback worker and the GC worker take a cache
segment id from the cache device metadata and index cache->segments[]
with it without checking it against cache->n_segs. That metadata is only
CRC-protected with a fixed public seed, so whoever supplies the cache
device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range
value forms a wild pcache_cache_segment pointer that is dereferenced and
written through -- an out-of-bounds read and write driven by on-disk data.
Add cache_seg_id_valid() and reject an out-of-range id at each decode
site, failing the operation with -EIO instead of indexing past the array.
Bound the id against the initialized-segment count (cache_info.n_segs)
rather than the physical device total. A forged cache_info.n_segs below
seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed
structs whose data pointer is NULL, so a forged id in that window would
still be dereferenced. A later patch guarantees cache_info.n_segs <=
seg_num, and a driver-created cache sets the two equal, so valid images
are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read
Reject voltage objects whose usSize is smaller than the header or would
advance the cursor past the table end, preventing an infinite loop or
heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in plane reset function
amdgpu_dm_plane_drm_plane_reset() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in CRTC reset function
amdgpu_dm_crtc_reset_state() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next] |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a
condition that is never fulfilled, the CPU busy-waits for prolonged time
and the timeout triggers only with a massive delay causing a CPU stall.
This happens due to a huge underestimation of wall clock time in
poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use
timekeeping in read_poll_timeout_atomic()") changed the behavior to no
longer use ktime_get at the expense of underestimation of wall clock
time which appears to be very large for delay_us=0. Instead of timing
out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout
takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for
loop in poll_timeout_us_atomic takes) which is in the range of several
minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero
value for delay_us. Use delay_us=10 to keep the delay in the hot path of
starting DMA transfers minimal but still avoid CPU stalls in case of
unexpected hardware failures.
One-off measurement with delay_us=0 causes the cpu to busy wait around 7
minutes in the timeout case. After applying this patch with delay_us=10
the measured timeout was 1053428 microseconds which is roughly
equivalent to the expected 1000000 microseconds specified in
XILINX_DMA_LOOP_COUNT.
Add a constant XILINX_DMA_POLL_DELAY_US for delay_us value. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes/x86: Move optimized uprobe from nop5 to nop10
Andrii reported an issue with optimized uprobes [1] that can clobber
redzone area with call instruction storing return address on stack
where user code may keep temporary data without adjusting rsp.
Fixing this by moving the optimized uprobes on top of 10-bytes nop
instruction, so we can squeeze another instruction to escape the
redzone area before doing the call, like:
lea -0x80(%rsp), %rsp
call tramp
Note the lea instruction is used to adjust the rsp register without
changing the flags.
We use nop10 and following transformation to optimized instructions
above and back as suggested by Peterz [2].
Optimize path (int3_update_optimize):
1) Initial state after set_swbp() installed the uprobe:
cc 2e 0f 1f 84 00 00 00 00 00
From offset 0 this is INT3 followed by the tail of the original
10-byte NOP.
After a previous unoptimization bytes 5..9 may still contain the
old call instruction, which remains valid for threads already there.
2) Rewrite the LEA tail and call displacement:
cc [8d 64 24 80 e8 d0 d1 d2 d3]
From offset 0 this traps on the uprobe INT3. Bytes 1..9 are not
executable entry points while byte 0 is trapped.
3) Publish the first LEA byte:
[48] 8d 64 24 80 e8 d0 d1 d2 d3
From offset 0 this is:
lea -0x80(%rsp), %rsp
call <uprobe-trampoline>
Unoptimize path (int3_update_unoptimize):
1) Initial optimized state:
48 8d 64 24 80 e8 d0 d1 d2 d3
Same as 3) above.
2) Trap new entries before restoring the NOP bytes:
[cc] 8d 64 24 80 e8 d0 d1 d2 d3
From offset 0 this traps. A thread that had already executed the
LEA can still reach the intact CALL at offset 5.
3) Restore bytes 1..4 of the original NOP while keeping byte 0 trapped
and byte 5 as CALL.
cc [2e 0f 1f 84] e8 d0 d1 d2 d3
From offset 0 this still traps. Offset 5 is still the CALL for any
thread that was already past the first LEA byte.
4) Publish the first byte of the original NOP:
[66] 2e 0f 1f 84 e8 d0 d1 d2 d3
From offset 0 this is the restored 10-byte NOP; the CALL opcode and
displacement are now only NOP operands. Offset 5 still decodes as
CALL for a thread that was already there.
Tthere is only a single target uprobe-trampoline for the given nop10
instruction address, so the CALL instruction will not be changed across
unoptimization/optimization cycles.
Therefore, any task that is preempted at the CALL instruction is guaranteed
to observe that CALL and not anything else.
Note as explained in [2] we need to use following nop10:
PF1 PF2 ESC NOPL MOD SIB DISP32
NOP10: 0x66, 0x2e, 0x0f, 0x1f, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00 -- cs nopw 0x00000000(%rax,%rax,1)
which means we need to allow 0x2e prefix which maps to INAT_PFX_CS
attribute in is_prefix_bad function.
Also changing the uprobe syscall error when called out of uprobe
trampoline to -EPROTO, so we are able to detect the fixed kernel.
The optimized uprobe performance stays the same:
uprobe-nop : 3.129 ± 0.013M/s
uprobe-push : 3.045 ± 0.006M/s
uprobe-ret : 1.095 ± 0.004M/s
--> uprobe-nop10 : 7.170 ± 0.020M/s
uretprobe-nop : 2.143 ± 0.021M/s
uretprobe-push : 2.090 ± 0.000M/s
uretprobe-ret : 0.942 ± 0.000M/s
--> uretprobe-nop10: 3.381 ± 0.003M/s
usdt-nop : 3.245 ± 0.004M/s
--> usdt-nop10 : 7.256 ± 0.023M/s
[1] https://lore.kernel.org/bpf/20260509003146.976844-1-andrii@kernel.org/
[2] https://lore.kernel.org/bpf/20260518104306.GU3102624@noisy.programming.kicks-ass.net/#t |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject MEM_ALLOC BTF accesses past object bounds
BTF struct walks relax the struct-size check for accesses through a
trailing flexible array. That is valid for ordinary BTF type walking, but
PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static
BTF type size.
When walking a MEM_ALLOC object, reject the access before applying the
flexible-array relaxation if the access range extends past the struct size.
Apply the same policy to struct ID matching so kfunc and kptr type checks
do not walk past the allocated object bounds either. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject writes through untrusted BTF pointers
check_ptr_to_btf_access() lets program-type btf_struct_access callbacks
validate writes before the default BTF access path rejects non-read
accesses. That bypasses the read-only policy for untrusted BTF pointers
created by helpers such as bpf_rdonly_cast().
Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the
common entry point, before the callback branch to handle all cases. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix handling of ultra performance key
The commit message of commit 5fbd827eb9c2 ("platform/x86: dell-wmi: Recognise or support new switches")
states that the ultra performance key contains additional data
after the type and code fields. The event data passed to
dell_wmi_process_key() is already parsed, so "buffer" already
starts after those two fields.
Use the correct index for accessing the first data field to avoid
a potential buffer overread. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
check_kfunc_args() detects a kfunc argument named rdonly_buf_size or
rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64,
and does not bound it. check_kfunc_call() later copies that value into
the returned register's mem_size field:
meta->r0_size = reg->var_off.value;
...
regs[BPF_REG_0].mem_size = meta.r0_size;
regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set
gets truncated instead of causing a load-time rejection, so the verifier
records a PTR_TO_MEM register with an approximately 4 GiB mem_size for
whatever allocation the kfunc returned. A later access check against
that register uses the truncated, wrong bound.
Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the
point meta->r0_size is set. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uac: validate rate list length before storing
UAC1 and UAC2 configfs rate-list attributes parse a comma-separated
list of sampling rates and store each parsed value in fixed-size arrays.
The arrays have UAC_MAX_RATES entries, but the store paths do not check
that the input contains at most that many tokens before writing through
opts->name##s[i++].
Writing more than ten rates therefore writes past the end of the
p_srates[] or c_srates[] array in struct f_uac1_opts or struct
f_uac2_opts.
With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the
UAC1 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac1.c:1669:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac1_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
The same reproducer against the UAC2 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac2.c:2087:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac2_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
Reject additional tokens once UAC_MAX_RATES entries have been parsed.
Also keep the original kstrdup() pointer for kfree(), because strsep()
advances the parsing cursor. Freeing the advanced cursor leaks the
original buffer on successful parses and can free an interior pointer on
some error paths. |
