| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix double free issue during amdgpu module unload
Flexible endpoints use DIGs from available inflexible endpoints,
so only the encoders of inflexible links need to be freed.
Otherwise, a double free issue may occur when unloading the
amdgpu module.
[ 279.190523] RIP: 0010:__slab_free+0x152/0x2f0
[ 279.190577] Call Trace:
[ 279.190580] <TASK>
[ 279.190582] ? show_regs+0x69/0x80
[ 279.190590] ? die+0x3b/0x90
[ 279.190595] ? do_trap+0xc8/0xe0
[ 279.190601] ? do_error_trap+0x73/0xa0
[ 279.190605] ? __slab_free+0x152/0x2f0
[ 279.190609] ? exc_invalid_op+0x56/0x70
[ 279.190616] ? __slab_free+0x152/0x2f0
[ 279.190642] ? asm_exc_invalid_op+0x1f/0x30
[ 279.190648] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu]
[ 279.191096] ? __slab_free+0x152/0x2f0
[ 279.191102] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu]
[ 279.191469] kfree+0x260/0x2b0
[ 279.191474] dcn10_link_encoder_destroy+0x19/0x30 [amdgpu]
[ 279.191821] link_destroy+0xd7/0x130 [amdgpu]
[ 279.192248] dc_destruct+0x90/0x270 [amdgpu]
[ 279.192666] dc_destroy+0x19/0x40 [amdgpu]
[ 279.193020] amdgpu_dm_fini+0x16e/0x200 [amdgpu]
[ 279.193432] dm_hw_fini+0x26/0x40 [amdgpu]
[ 279.193795] amdgpu_device_fini_hw+0x24c/0x400 [amdgpu]
[ 279.194108] amdgpu_driver_unload_kms+0x4f/0x70 [amdgpu]
[ 279.194436] amdgpu_pci_remove+0x40/0x80 [amdgpu]
[ 279.194632] pci_device_remove+0x3a/0xa0
[ 279.194638] device_remove+0x40/0x70
[ 279.194642] device_release_driver_internal+0x1ad/0x210
[ 279.194647] driver_detach+0x4e/0xa0
[ 279.194650] bus_remove_driver+0x6f/0xf0
[ 279.194653] driver_unregister+0x33/0x60
[ 279.194657] pci_unregister_driver+0x44/0x90
[ 279.194662] amdgpu_exit+0x19/0x1f0 [amdgpu]
[ 279.194939] __do_sys_delete_module.isra.0+0x198/0x2f0
[ 279.194946] __x64_sys_delete_module+0x16/0x20
[ 279.194950] do_syscall_64+0x58/0x120
[ 279.194954] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 279.194980] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer
Pass pointer reference to amdgpu_bo_unref to clear the correct pointer,
otherwise amdgpu_bo_unref clear the local variable, the original pointer
not set to NULL, this could cause use-after-free bug. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size. |
| CAI Content Credentials versions c2pa-web@0.7.1, c2pa-v0.80.1 and earlier are affected by an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability that could result in an arbitrary file system write. An attacker could leverage this vulnerability to write to unauthorized files or directories outside of intended restrictions. Exploitation of this issue requires user interaction in that a victim must extract a maliciously crafted file. |
| CAI Content Credentials versions c2pa-web@0.7.1, c2pa-v0.80.1 and earlier are affected by an Integer Overflow or Wraparound vulnerability. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: atomisp: Disallow all private IOCTLs
Disallow all private IOCTLs. These aren't quite as safe as one could
assume of IOCTL handlers; disable them for now. Instead of removing the
code, return in the beginning of the function if cmd is non-zero in order
to keep static checkers happy. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int()
When gmin_get_config_var() calls efi.get_variable() and the EFI variable
is larger than the expected buffer size, two behaviors combine to create
a stack buffer overflow:
1. gmin_get_config_var() does not return the proper error code when
efi.get_variable() fails. It returns the stale 'ret' value from
earlier operations instead of indicating the EFI failure.
2. When efi.get_variable() returns EFI_BUFFER_TOO_SMALL, it updates
*out_len to the required buffer size but writes no data to the output
buffer. However, due to bug #1, gmin_get_var_int() believes the call
succeeded.
The caller gmin_get_var_int() then performs:
- Allocates val[CFG_VAR_NAME_MAX + 1] (65 bytes) on stack
- Calls gmin_get_config_var(dev, is_gmin, var, val, &len) with len=64
- If EFI variable is >64 bytes, efi.get_variable() sets len=required_size
- Due to bug #1, thinks call succeeded with len=required_size
- Executes val[len] = 0, writing past end of 65-byte stack buffer
This creates a stack buffer overflow when EFI variables are larger than
64 bytes. Since EFI variables can be controlled by firmware or system
configuration, this could potentially be exploited for code execution.
Fix the bug by returning proper error codes from gmin_get_config_var()
based on EFI status instead of stale 'ret' value.
The gmin_get_var_int() function is called during device initialization
for camera sensor configuration on Intel Bay Trail and Cherry Trail
platforms using the atomisp camera stack. |
| In the Linux kernel, the following vulnerability has been resolved:
media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs()
The "s3a_buf" is freed along with all the other items on the
"asd->s3a_stats" list. It leads to a double free and a use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: qcom-lpg: Check for array overflow when selecting the high resolution
When selecting the high resolution values from the array, FIELD_GET() is
used to pull from a 3 bit register, yet the array being indexed has only
5 values in it. Odds are the hardware is sane, but just to be safe,
properly check before just overflowing and reading random data and then
setting up chip values based on that. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rockchip: rkcif: fix off by one bugs
Change these comparisons from > vs >= to avoid accessing one element
beyond the end of the arrays.
While at it, use ARRAY_SIZE instead of the _MAX enum values.
[fix cosmetic issues] |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: gb-beagleplay: bound bootloader receive buffering
cc1352_bootloader_rx() appends each serdev chunk into the fixed
rx_buffer before parsing bootloader packets. The helper can keep
leftover bytes between callbacks and may receive multiple packets in one
callback, so a single count value is not constrained by one packet
length.
Check that the incoming chunk fits in the remaining receive buffer space
before memcpy(). If it does not, drop the staged data and consume the
bytes instead of overflowing rx_buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix rlimit for posix cpu timers
Posix cpu timers requires an additional step beyond setting the rlimit.
Refactor the code so its clear when what code is setting the
limit and conditionally update the posix cpu timers when appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: mprls0025pa: fix spi_transfer struct initialisation
Make sure that the spi_transfer struct is zeroed out before use. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/scatterlist: fix length calculations in extract_kvec_to_sg
Patch series "Fix bugs in extract_iter_to_sg()", v3.
Fix bugs in the kvec and user variants of extract_iter_to_sg. This series
is growing due to useful remarks made by sashiko.dev.
The main bugs are:
- The length for an sglist entry when extracting from
a kvec can exceed the number of bytes in the page. This
is obviously not intended.
- When extracting a user buffer the sglist is temporarily
used as a scratch buffer for extracted page pointers.
If the sglist already contains some elements this scratch
buffer could overlap with existing entries in the sglist.
The series adds test cases to the kunit_iov_iter test that demonstrate all
of these bugs. Additionally, there is a memory leak fix for the test
itself.
The bugs were orignally introduced into kernel v6.3 where the function
lived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c in
v6.5. Thus the actual fix is only marked for backports to v6.5+.
This patch (of 5):
When extracting from a kvec to a scatterlist, do not cross page
boundaries. The required length was already calculated but not used as
intended.
Adjust the copied length if the loop runs out of sglist entries without
extracting everything.
While there, return immediately from extract_iter_to_sg if there are no
sglist entries at all.
A subsequent commit will add kunit test cases that demonstrate that the
patch is necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
of: unittest: fix use-after-free in of_unittest_changeset()
The variable 'parent' is assigned the value of 'nchangeset' earlier in the
function, meaning both point to the same struct device_node. The call to
of_node_put(nchangeset) can decrement the reference count to zero and
free the node if there are no other holders. After that, the code still
uses 'parent' to check for the presence of a property and to read a
string property, leading to a use-after-free.
Fix this by moving the of_node_put() call after the last access to
'parent', avoiding the UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/zone_device: do not touch device folio after calling ->folio_free()
The contents of a device folio can immediately change after calling
->folio_free(), as the folio may be reallocated by a driver with a
different order. Instead of touching the folio again to extract the
pgmap, use the local stack variable when calling percpu_ref_put_many(). |
| Inappropriate implementation in DevTools in Google Chrome prior to 149.0.7827.115 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
