| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in the Siebel CRM End User product of Oracle Siebel CRM (component: Open UI). Supported versions that are affected are 17.0-26.9. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Siebel CRM End User. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Siebel CRM End User accessible data. CVSS 3.1 Base Score 3.1 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:N). |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Liquid Web / StellarWP GiveWP give allows Code Injection.This issue affects GiveWP: from n/a through 4.13.1. |
| The All in One SEO WordPress plugin before 5.0.2.1 does not correctly determine which shortcodes are present in content derived from user input before deciding which ones to strip, allowing unauthenticated users to execute arbitrary shortcodes registered on the site. On sites upgraded from older versions the protection is disabled outright, making the issue reachable without any crafted input. |
| Improper Handling of Highly Compressed Data (Data Amplification) in esaml_binding in dropbox esaml allows an unauthenticated attacker to exhaust server memory and crash the Erlang VM via a crafted compressed SAMLResponse.
esaml_binding:decode_response/2 base64-decodes the attacker-supplied SAMLResponse, inflates it with zlib:unzip/1 with no bound on the output, then converts the result to a charlist with binary_to_list/1 before parsing. This runs on the SAML consume (ACS) and single-logout endpoints, which accept unauthenticated requests by design, and it runs before any signature check. A small deflate stream reaches a compression ratio near 1000 to 1, so a request body of tens of kilobytes inflates to hundreds of megabytes and then to several gigabytes of list heap, so a few requests exhaust memory and take the node down.
This issue affects esaml: from 0.1.0 onward. |
| Allocation of Resources Without Limits or Throttling vulnerability in esaml in dropbox esaml allows an unauthenticated attacker to exhaust the Erlang VM atom table and crash the node via unsigned LogoutResponse messages.
esaml:status_code_map/1 in src/esaml.erl maps any StatusCode value it does not recognize to an atom with list_to_atom/1 on the last colon-separated segment of the URN. esaml_sp:validate_logout_response/2 verifies a signature only when the message carries one, so an unsigned LogoutResponse posted to the single-logout endpoint reaches esaml:decode_logout_response/1 and mints one permanent atom per distinct status value. Atoms are never reclaimed and the VM caps the atom table at about one million entries, so an attacker who posts that many distinct values aborts the node.
This issue affects esaml: from 0.1.0 onward. |
| Allocation of Resources Without Limits or Throttling vulnerability in esaml_binding in dropbox esaml allows an unauthenticated attacker to exhaust the Erlang VM atom table and crash the node via a crafted SAMLResponse.
esaml_binding:decode_response/2 parses the decoded SAMLResponse with xmerl_scan:string/2, which interns every element name, attribute name, and namespace prefix it reads as a permanent atom. The SAML consume (ACS) and single-logout endpoints call it on unauthenticated requests before any signature check, so one well-formed document with thousands of distinct names mints thousands of atoms while staying inside the 128 KB request body limit. Atoms are never reclaimed and the VM caps the atom table at about one million entries, so a few dozen requests abort the node.
This issue affects esaml: from 0.1.0 onward. |
| Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by an incorrect authorization vulnerability in the Modoboa driver of the password plugin. The driver took the first entry of the account search result returned by the Modoboa API instead of matching the authenticated user, so a password change could be applied to a different account. Upstream fixed this in the commit “Fix bug where Password Modoboa driver could change password for another account”, which selects the account whose username matches and fails if none does. |
| The system fails to invalidate existing access tokens associated with sub-organization users during sensitive account management operations such as password reset, role change, or sub-organization disablement. This oversight allows previously issued tokens to remain active even after the user's access context has been modified or revoked through administrative actions.
The identified issue could lead to unauthorized access by a malicious actor, but only when all of the following conditions are met: previously issued access tokens remain active, and these tokens have been exposed to malicious actors. |
| A flaw was found in odh-dashboard in Red Hat OpenShift AI. The backend-for-frontend route GET /api/nim-serving/:nimResource reads Kubernetes Secrets using the dashboard service account and returns the full Secret object, including .data, without an authorization check. Any authenticated dashboard user can retrieve the cluster NVIDIA NGC API key Secret (apiKeySecret) and the NIM image pull secret (nimPullSecret). Create and delete of the same NIM credential are admin-gated; the read path is not. This is missing authorization (CWE-862) and insufficiently protected credentials (CWE-522). It is distinct from CVE-2026-5483 (service-account token leak in the Kubernetes client response wrapper on the same route) and CVE-2026-16456 (odh-model-controller cross-namespace confused deputy). |
| A flaw was found in the vllm-orchestrator-gateway component. The system's production binary logs all incoming authorization headers and full chat payloads, which may contain personally identifiable information (PII) and secrets, to persistent logs. This sensitive data, including bearer tokens and chat content, can be accessed by any user with logging privileges. This vulnerability leads to information disclosure, potentially allowing an attacker to harvest credentials and sensitive conversation content. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JDK tools). Supported versions that are affected are Oracle Java SE: 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition executes to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 4.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:H/A:N). |
| Vulnerability in the Oracle Identity Manager Connector product of Oracle Fusion Middleware (component: LDAP Gateway). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via LDAP to compromise Oracle Identity Manager Connector. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Identity Manager Connector accessible data as well as unauthorized access to critical data or complete access to all Oracle Identity Manager Connector accessible data. CVSS 3.1 Base Score 9.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N). |
| In the Golang Chi web framework, the ClientIPFromXFF middleware skips any X-Forwarded-For entry in a configured trusted CIDR but never verifies that the direct TCP peer in http.Request.RemoteAddr belongs to that CIDR. A client that can reach the Go server directly can therefore append a trusted-looking proxy address and choose the client IP returned by middleware.GetClientIP.
This issue affects chi before 5.4.0. |
| A flaw was found in odh-dashboard. This vulnerability allows an attacker, who has compromised the dashboard's Service Account (SA) token, to exploit overly broad permissions granted to the SA. This enables the attacker to escalate their privileges to cluster-administrator level, gain access to sensitive data like credentials and keys across the entire cluster, and disrupt multi-tenant isolation. |
| A flaw was found in the file_type content detector of guardrails-detectors. This vulnerability allows a remote attacker to supply an arbitrary XML Schema Definition (XSD) string, which is processed without proper restrictions. This can lead to server-side requests to arbitrary URLs or local file reads, potentially resulting in sensitive information disclosure, such as cloud provider credentials or access to internal network services. |
| The Ultimate Member – User Profile, Registration, Login, Member Directory, Content Restriction & Membership Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'form_id' parameter in all versions up to, and including, 2.13.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected payload is stored in the registering user's 'submitted' usermeta via update_user_meta() and is only triggered when an administrator opens the affected user record in the wp-admin Users modal, which inserts the unescaped output via jQuery .html(). |
| Missing Authentication for Critical Function (CWE-306) and Insufficiently Protected Credentials (CWE-522) in the control plane enrollment status handler (HandleEnrollStatus at GET /enroll/status in internal/controlplane/server.go) in Google OSS Agent Mesh (SAM) versions 0.1.0-alpha.1 through 0.1.0-alpha.8 allow an unauthenticated remote attacker to retrieve an approved bootstrap-enrolled peer's signed Biscuit identity token by supplying a peer_id obtainable from the unauthenticated GET /info endpoint. A related flaw in POST /enroll allowed any bootstrap-token holder to re-fetch another peer's credential. An attacker can replay the disclosed Biscuit token as a bearer credential on /policies to read mesh authorization policies and on /routers/lease to overwrite advertised router multiaddrs. Users should upgrade to version 0.1.0-alpha.9 or later, which requires cryptographic proof of possession of the enrollment private key on credential-releasing endpoints, enforces rate limiting, and validates router lease addresses. |
| Missing Authorization vulnerability in ThimPress LearnPress learnpress allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects LearnPress: from n/a through 4.4.10. |
| BoxyHQ Enterprise SaaS Starter Kit through 1.6.0 contains a missing authorization vulnerability that allows non-owner team members to manage billing because payment routes skip the team_payments permission check. Authenticated MEMBER or ADMIN users can call create-portal-link, create-checkout-session, and products to open Stripe billing portals, view invoices, change payment methods, or alter subscriptions. |
| Krayin CRM 2.2.5 before 2.2.7 contains a server-side request forgery filter bypass that allows users with webhook permissions to reach internal addresses via DNS rebinding. Attackers can return a public address during WebhookService::isSafeEndpoint() validation and an internal address when Guzzle re-resolves, sending blind requests to internal services and cloud metadata endpoints. |
