| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9484/1: enable interrupts when unhandled user faults are triggered
PREEMPT_RT requires interrupts to be enabled when sending signals.
When do_DataAbort()/do_PrefetchAbort() triggers unhandled user faults,
that is `inf->fn()` return a non-zero value, and the interrupts are not
enabled within the hook function, force_sig_fault() will be called
with interrupts disabled.
This can be triggered by user programs executing the bkpt instruction,
with kernel config CONFIG_PERF_EVENTS=n.
Enable interrupts in do_DataAbort()/do_PrefetchAbort() when unhandled
user faults are triggered to fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: hwmon: Remove hwmon class device along with its parent
The current code creates one hwmon device per thermal zone type and that
device is registered under the first thermal zone of the given type.
That turns out to be problematic when the thermal zone holding the
hwmon device is removed.
For example, say that there are two ACPI thermal zones on a system
/sys/devices/virtual/thermal/thermal_zone0/
/sys/devices/virtual/thermal/thermal_zone1/
The current code registers a hwmon class device for thermal_zone0 only:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/
because the type is "acpitz" for both of them, but it adds a sysfs
attribute that belongs to thermal_zone1 under it:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input
There is also
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input
which belongs to thermal_zone0.
When thermal_zone0 is removed, say because the ACPI thermal driver is
unbound from the underlying platform device, thermal_remove_hwmon_sysfs()
skips the removal of hwmon0 because of the temp2_input attribute
belonging to thermal_zone1 which effectively prevents thermal_zone0
removal from making progress.
Address this by making thermal_remove_hwmon_sysfs() remove the entire
hwmon class device interface for the given thermal zone type when the
thermal zone device holding it is removed.
To prevent races with thermal_add_hwmon_sysfs() that may interfere
with this, carry out the entire addition and removal of hwmon sysfs
interfaces for thermal zones under thermal_hwmon_list_lock.
Also adjust the layout of the labels in thermal_add_hwmon_sysfs() to
the current kernel coding style to align with the new "unlock" label. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/efi: Avoid voluntary preemption with efi_mm installed
Gus reports a bad kernel memory access when using software PAN
(CONFIG_ARM64_SW_TTBR0_PAN=y) on a machine with support for EFI runtime
services:
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 00000000f322ff30
Mem abort info:
ESR = 0x0000000096000004
FSC = 0x04: level 0 translation fault
Internal error: Oops: 0000000096000004 [#1] SMP
Workqueue: efi_rts_wq efi_call_rts
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : efi_call_rts+0xd8/0x288
Call trace:
efi_call_rts+0xd8/0x288 (P)
process_one_work+0x178/0x4f8
worker_thread+0x194/0x328
This is because the fpsimd context management code called from
__efi_fpsimd_begin() can preempt voluntarily, returning later to the EFI
code with an incorrect value for TTBR0_EL1 thanks to the deferred mm
switching used by the software PAN implementation.
Since EFI runtime services cannot preempt voluntarily and because the
fpsimd switching code does not rely on the TTBR0_EL1 mappings, simply
reorder the fpsimd switch so that it occurs before we change the
page-table. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: invalidate the correct range after O_APPEND direct write
fuse_direct_write_iter() captures pos before generic_write_checks(),
which moves ki_pos to EOF for O_APPEND writes:
fuse_direct_write_iter()
{
pos = iocb->ki_pos; /* 0 (user-supplied) */
generic_write_checks(); /* ki_pos -> EOF */
fuse_direct_io(); /* writes at EOF, correct */
invalidate(pos, pos + res); /* [0, res) -- wrong */
}
The post-write invalidation targets a stale range instead of the
actual written range at EOF.
This can cause data inconsistency when the file size is not
page-aligned. The tail page straddling EOF has a valid portion
before EOF that concurrent readers can fault back in during the
DIO write window:
Tail page (file size X not page-aligned):
page_start X (EOF) page_end
|--- valid data ----|-- stale --|
CPU0 (O_APPEND DIO writer) CPU1 (buffered reader)
-------------------------- ----------------------
invalidate [X, X+len)
tail page evicted
FUSE_WRITE in flight ...
read [page_start, X)
tail page re-faulted
[X, page_end) = stale
FUSE_WRITE completes
i_size = X + len
invalidate [0, len) <- WRONG
tail page still cached
read [X, X+len)
hits stale tail page
returns old data
Fix by reading pos back from iocb->ki_pos after generic_write_checks(),
as generic_file_direct_write() does.
Also fix a typo in the comment ("may have" -> "may have competed"). |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: don't check the listener's sk_err in vsock_accept()
Syzbot reported an issue which can be reproduced with these steps:
r0 = socket(AF_VSOCK, SOCK_STREAM, 0)
bind(r0, {VMADDR_CID_ANY, PORT})
connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect)
listen(r0, backlog) -> 0
r1 = socket(AF_VSOCK, SOCK_STREAM, 0)
connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0
accept(r0) -> -1, EPROTO (stale sk_err)
Basically, it creates a socket (r0) and triggers a self-connect after
binding it. This self-connect fails with EPROTO because it loops back
to r0 while the socket is still in the TCP_SYN_SENT state, causing it
to be incorrectly dispatched to the connecting-client path. The
unexpected packet type encountered there sets sk_err to EPROTO.
After that, it invokes a listen() call on the same socket. This
listen() call succeeds because the kernel's listening path never
inspects or clears sk_err. Then, a new socket (r1) is created as a
normal client and connects to r0. However, vsock_accept() rejects this
incoming connection because the listener's sk_err still holds the
EPROTO error from the earlier failed self-connect.
This rejection causes the child socket created for r1's connection to
never be freed on virtio or hyperv transports; only the VMCI transport
implements pending_work to revisit and clean up a rejected socket.
For a non-blocking connect(), vsock_connect() may return -EINPROGRESS
immediately, and vsock_connect_timeout() can later set sk->sk_err
asynchronously.
Since no vsock transport ever sets sk_err on a socket while it is in
TCP_LISTEN state, checking it in vsock_accept() serves no purpose and
only carries forward errors left behind by earlier, unrelated
connection attempts on the same socket. Remove the checks so accept()
no longer rejects valid incoming connections because of a stale
error, which also avoids the resource leak described above. |
| A memory initialization issue was addressed with improved memory handling. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. An app with root privileges may be able to read uninitialized kernel memory. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix init ordering in amdgpu_vram_mgr_init()
drmm_cgroup_register_region() is called before INIT_LIST_HEAD() and
gpu_buddy_init() in amdgpu_vram_mgr_init(). If it fails, the function
returns early and bypasses those initializations.
Since adev->mman.initialized is set to true before amdgpu_vram_mgr_init()
is called, a failure triggers amdgpu_ttm_fini(), which calls
amdgpu_vram_mgr_fini(), which then:
- Calls list_for_each_entry_safe() on reservations_pending and
reserved_pages, whose list_head::next pointers are zero-initialized
(NULL). The loop does not recognize them as empty and dereferences NULL.
- Calls gpu_buddy_fini(), which iterates free_trees[] unconditionally
via for_each_free_tree(). Since mm->free_trees is NULL
(never allocated), this dereferences NULL.
Both result in a kernel panic on the module load error path.
Fix by moving drmm_cgroup_register_region() to after the list and buddy
allocator are fully initialized, so the teardown path is safe to run. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to pass folio->index to f2fs_sanity_check_node_footer()
Otherwise in f2fs_sanity_check_node_footer(), it will check the
same nid incorrectly. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started
qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not
started (!ha->flags.fw_started), but the out: path unconditionally calls
qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an
unconditional doorbell write to the request queue in-pointer register.
This rings the firmware doorbell and queues an IOCB that stopped or
resetting firmware cannot consume, and touches MMIO during the reset/EEH
window where fw_started is also clear.
Only emit the LS reject IOCB (and ring the doorbell) when fw_started is
set; otherwise just clean up and return. The post-allocation failure
cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started
and still send the reject. Apply the same guard to the reject emission
in qla2xxx_process_purls_pkt(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Remove VM-wide VNCR mapping counter
The global VNCR mapping counter is used to decide whether an L1
provided VNCR page is mapped in L0 on any CPU at the point of
dealing with a TLB invalidation. It is incremented when a mapping
is made in the fixmap, and decremented when unmapped.
As it turns out, this tracking has several flaws:
- we are trying to invalidate TLBs, and the mapping is only an
opportunistic consequence of the TLB. Checking this counter to
decide whether a TLB needs to be invalidated may result in missed
invalidations.
- an L1 vcpu invalidating its own TLB (a very likely case) will not
succeed in invalidating the VNCR pseudo TLB because that page is
not mapped in L0 at this stage.
Given that this tracking fails at delivering the minimum guarantees
that are required and is only a performance optimisation, remove it
completely. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Initialize NVMe abort_work once at submission
qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on
priv->abort_work immediately before schedule_work(). INIT_WORK()
reinitializes the work_struct, resetting its list head and clearing the
pending bit. If an abort is issued more than once for the same command
(for example, concurrent transport teardown and a timeout-driven abort),
the second INIT_WORK() reinitializes a work item that is already queued,
which can corrupt the workqueue list and lead to crashes or a looping
worker.
Initialize priv->abort_work once at command submission, next to the
existing per-command spin_lock_init(&priv->cmd_lock), and leave only
schedule_work() in the abort paths. schedule_work() already does nothing
when the work item is still pending, so a repeated abort no longer
disturbs an in-flight work item. The command is not returned to the
transport until the final kref_put()/release callback runs after
abort_work has completed, so the work item is idle before priv is reused
and the single submission-time INIT_WORK() is safe. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Resume device before setting EOS flag
Setting the EOS flag talks to the firmware via send_firmware_command(),
which accesses VPU registers. Both the STREAMOFF path
(wave5_vpu_dec_job_abort()) and the V4L2_DEC_CMD_STOP path
(wave5_vpu_dec_stop()) can run while the device is runtime suspended, so
those register accesses hit powered-down hardware and the SoC raises an
asynchronous SError, panicking the kernel:
SError Interrupt on CPU3, code 0x00000000bf000000 -- SError
send_firmware_command+0x2c/0x160 [wave5]
wave5_vpu_dec_set_bitstream_flag+0x6c/0x80 [wave5]
wave5_vpu_dec_update_bitstream_buffer+0x80/0xec [wave5]
wave5_vpu_dec_job_abort+0x44/0xa0 [wave5]
v4l2_m2m_cancel_job+0x110/0x19c [v4l2_mem2mem]
v4l2_m2m_streamoff+0x24/0x140 [v4l2_mem2mem]
Resume the device with pm_runtime_resume_and_get() around the EOS
firmware command and release it with pm_runtime_put_autosuspend(),
matching the runtime PM handling already done in
wave5_vpu_dec_device_run(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: harmony: initialize locks before requesting IRQ
snd_harmony_create() registers the IRQ before initializing h->lock and
h->mixer_lock. A pending interrupt can invoke the handler while these
locks are uninitialized.
Initialize both locks before requesting the IRQ so the handler always
sees valid lock state. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit
Always check and clear KVM_REQ_GET_NESTED_STATE_PAGES when emulating a
nested VM-Exit to ensure the request is cleared, even when KVM was built
with CONFIG_KVM_HYPERV=n, as KVM subtly relies on the "check" to clear
the flag and thus avoid double-mapping the vmcs12 pages, e.g. if KVM
manages to bail from VM-Enter without processing the request, and then
emulates VMLAUNCH or VMRESUME. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
dw_edma_irq_request() passes struct dw_edma_irq to request_irq() before
dw_edma_channel_setup() fills the back pointer. A shared interrupt can
therefore enter the handler with dw_irq->dw still NULL, leading to a
NULL pointer dereference.
Set the back pointer before installing each handler. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-direct: return struct page from dma_direct_alloc_from_pool()
Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool
helper") changed dma_direct_alloc_from_pool() to return the CPU address
from dma_alloc_from_pool(). That fits dma_direct_alloc(), but
dma_direct_alloc_pages() also uses the helper and expects a struct page *.
Fix this by making dma_direct_alloc_from_pool() return the struct page *
again, and pass the CPU address back through an out-parameter for the
dma_direct_alloc() caller. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Do not save/restore percpu base register in rethook trampoline
The rethook trampoline saves $r21 ($u0), the percpu base, into its frame
at entry and restores it at exit. Inbetween rethook_trampoline_handler()
may schedule via preempt_enable_notrace().
If the task migrates to another CPU, the frame's $r21 holds the old
CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until
the next user->kernel transition heals $r21, all this_cpu_*() accesses
(runqueues, RCU per-CPU data, timer tick programming, FPU ownership)
hit the wrong CPU's percpu area.
Under kretprobe-heavy preemptible load this can corrupt scheduler and
timer state: scheduling-while-atomic splats, wrong-CPU RCU warnings,
WARN_ON_ONCE(rq != this_rq()) in nohz_balance_exit_idle(), and CPUs
parking in the idle loop with the constant timer never re-armed (hard
lockup). Reproduces on a Loongson-3A6000 with kretprobes on VFS paths
plus heavy file churn (OS install / unsquashfs).
By convention $r21 always holds the current CPU's percpu base in kernel
mode: SAVE_SOME() at exception entry reloads it only when coming from
user mode, and RESTORE_SOME() restores it only when returning to user
mode; the context-switch path never writes it. Therefore the live $r21
at trampoline exit is already correct, and nothing inbetween can change
it legitimately (kernel C code cannot write a global register variable).
The same flaw existed even in the pre-rethook kretprobe trampoline since
v6.3; it was carried over when rethook replaced it. Drop both the save
and the restore here. Drop the restore is enough to solve the issue, and
drop the save is to keep the code tidy and no need to clear it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: transfer the pmd dirty bit to the folio on zap
zap_huge_pmd_folio() propagates the pmd young bit to the folio for the
file case, but not the dirty bit. The pte path does propagate it, in
zap_present_folio_ptes() and so does the pmd split path, in
__split_huge_pmd_locked().
For most file mappings the omission is harmless, because writing to a
shared file mapping goes through page_mkwrite(), which dirties the folio.
tmpfs is different: it has no page_mkwrite(), and vma_wants_writenotify()
is false for it, so a *read* fault on a MAP_SHARED tmpfs mapping installs
a writable pmd via do_read_fault(). do_read_fault() does not call
fault_dirty_shared_page(), so subsequent stores through that mapping set
only the hardware dirty bit in the pmd and never call folio_mark_dirty().
A shmem folio allocated by a fault is marked uptodate but not dirty (see
the clear: block in shmem_get_folio_gfp()), so PG_dirty is never set at
all.
Unmapping such a folio - munmap(), or exit_mmap() when the process dies -
then loses the only record that it was written, because zap_huge_pmd()
drops the pmd without transferring the dirty bit. Reclaim afterwards sees
a clean shmem folio: the whole swap-out block in shrink_folio_list() is
inside "if (folio_test_dirty(folio))", so pageout() is skipped and the
folio falls into __remove_mapping(). There, folio_is_file_lru() is false
for a swapbacked folio, so no shadow entry is created and
__filemap_remove_folio(folio, NULL) simply empties the i_pages slot. The
data is freed without ever being written to swap, and the next fault on
that index returns a freshly zeroed folio.
This is silent data loss for any process that keeps state in a MAP_SHARED
tmpfs segment across an unmap - for example a cache handed from one
process generation to the next through /dev/shm. It requires the folio to
be PMD-mapped, so it only shows up once shmem THP is enabled (which is
what we did in Meta fleet and started noticing crashes); with THP off the
pte path transfers the dirty bit correctly. It also only becomes visible
when swap is enabled, because with no swap device shmem folios (which are
on the anon LRU) are not scanned by reclaim at all, so the clean folio is
never dropped.
Reproduced on x86_64 with a tmpfs mounted huge=within_size: read-fault a
2MB-backed region, write a known pattern through the resulting mapping,
munmap, force reclaim of the cgroup, then re-map and read back. Without
this patch the region reads back as zeros and vmstat shows zswpout 0 - the
data was discarded rather than swapped. With this patch the region reads
back correctly and the pages are swapped out as expected. With
huge=never, or when the first touch is a write, the test passes either
way. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Sign-extend VA for range-based TLBI invalidation
When the decode_range_tlbi() helper was moved to be used for S1 TLBIs,
the required sign extension was omitted. Add it.
As a result, special care must be taken to not overflow PA bits when
this is used for S2 invalidation. |
| Improper initialization in Network in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
