| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A stack-based buffer overflow in the _RdbLoadEntity function of the RDB graph decoders (src/serializers/decoders/*/decode_graph_entities.c) in FalkorDB before 4.18.4 allows a remote attacker who can issue Redis replication commands (for example, against an instance with no password configured) to cause a denial of service and possibly execute arbitrary code by supplying a crafted RDB stream with an attacker-controlled entity property count. The count sizes two variable-length arrays on the thread stack with no upper bound, and the decoder then fills them with attacker-supplied values. |
| A double free and use-after-free vulnerability in the RdbLoadDeletedNodes function of the RDB graph decoders (src/serializers/decoders/*/decode_graph_entities.c) in FalkorDB before 4.18.1 allows a remote attacker who can issue Redis replication commands (for example, against an instance with no password configured) to cause a denial of service or execute arbitrary code in the redis-server process by supplying a crafted RDB stream whose deleted-nodes buffer length is not a multiple of sizeof(NodeID). The length check relies on ASSERT(), which is compiled out in release builds, so the function continues after freeing the buffer, reading it and freeing it a second time. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: prevent authentication frame length truncation
mwifiex_cfg80211_authenticate() derives the authentication frame length
from req->ie_len and req->auth_data_len, both of type size_t, but stores
it in a u16.
NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is
a u16, a single attribute can carry up to 65531 bytes of payload, so the
sum can exceed U16_MAX before it is assigned to pkt_len. The truncated
pkt_len determines the skb frame area, while the copy length remains
req->auth_data_len - 4, resulting in a heap buffer overflow.
For example, with auth_data_len equal to 65510 and no IEs, the sum is
65546. It is truncated to 10 and then reduced by four to 6. The driver
appends only six bytes to the skb with skb_put(), but then copies 65506
user-provided bytes into the authentication body.
Reaching this path requires CAP_NET_ADMIN in the user namespace owning
the network namespace, an up station netdev, and a suitable BSS/SAE
authentication request.
Compute the length in size_t, reject values that cannot be represented by
the firmware's u16 frame length field, and only then assign it to pkt_len. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: validate scan response extents
mwifiex_ret_802_11_scan() subtracts the fixed response fields and the
firmware-provided BSS length from resp->size without first proving that
either extent fits. A short response or oversized BSS length can
therefore underflow tlv_buf_size and make the TLV parser walk beyond the
command response.
Compute the fixed extent from the selected normal or background scan
response. Validate that the fixed fields and BSS data fit before deriving
the TLV extent and entering the parser. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext()
wilc_wlan_handle_isr_ext() takes the RX transfer size from the
device-reported interrupt status register (a 15-bit field shifted left by 2,
up to 131068 bytes) and reads that many bytes from the device into
rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap
check only handles the current offset; the size itself is never
compared against the buffer, so a bogus SDIO device can make the driver
OOB-write rx_buffer by up to ~32K with data it controls.
The oversized transfer also leaves rx_buffer_offset past the end of
the buffer, after which the unsigned wrap check stops working and
the overflow can repeat.
Drop any transfer whose size exceeds the RX buffer, acknowledging
the data interrupt and re-arming the RX engine so the bogus frame is
discarded and reception can continue. This also restores the
rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check
relies on.
This is not expected to change driver behavior in most cases:
without this check, an oversized transfer would most likely
corrupt neighboring kernel memory instead of completing anyway, and
the drop path performs the same interrupt acknowledgment and RX
engine re-arming as the normal path, so subsequent transfers are
received unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| A flaw was found in GLib. The D-Bus client-side implementation of the DBUS_COOKIE_SHA1 SASL authentication mechanism does not validate the cookie_context parameter received from the server. A malicious D-Bus server can supply a cookie_context containing path traversal sequences, causing the client to read an arbitrary file and exfiltrate sensitive data by verifying guessed file contents against a generated hash. |
| A flaw was found in GLib. An off-by-one error can occur in the g_key_file_get_locale_string_list function in the gkeyfile.c file when loading a key file with an empty value. This flaw can cause an out-of-bounds access of 1 byte or a denial of service when the out-of-bounds access crosses a page boundary. |
| `openvt -u` is intended to identify the owner of the current VT and then execute `login` as that user from a privileged context. In the documented `kbrequest`/init usage, the ownership test in `authenticate_user()` relies on `stat("/proc/<pid>/fd/0")`. `stat()` on `/proc/<pid>/fd/0` follows the symlink to the underlying TTY device node. As a result, `buf.st_uid` reflects the owner of the TTY node rather than the owner of the process holding the file descriptor. If the TTY owner returns to `root` or the getty owner after logout while an unprivileged process still has `fd 0` attached to that TTY, the check can incorrectly treat that process as belonging to the privileged console owner. Once that check succeeds, the `-u` path executes a passwordless login as the selected user. In the documented `kbrequest`/init deployment using `openvt -us`, this can result in passwordless `login -f root` on the spawned VT. This report establishes that privilege escalation path for that documented deployment; it does not claim equivalent reachability for deployments that do not use `openvt -u` from a privileged `kbrequest`/init path. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: cancel reconnect work in clean_demultiplex_info()
clean_demultiplex_info() cancels server->echo delayed work but not
server->reconnect, which can cause a use-after-free when the
demultiplex thread exits while a reconnect work is still queued:
cifs_demultiplex_thread()
cifs_readv_from_socket()
cifs_reconnect()
__cifs_reconnect()
cifs_queue_server_reconn()
mod_delayed_work(cifsiod_wq, &server->reconnect, 0)
clean_demultiplex_info()
cancel_delayed_work_sync(&server->echo) // echo canceled
// reconnect NOT canceled
kfree_sensitive(server) // server freed
...later, on cifsiod_wq:
smb2_reconnect_server()
server->srv_count // UAF read of freed server
Fix this by canceling server->reconnect delayed work in
clean_demultiplex_info() before the server is freed, the same way
cifs_put_tcp_session() already does. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Skip KFD mapping clear before initialization
amdgpu_amdkfd_clear_kfd_mapping() assumes that a non-NULL kfd_dev
has a fully populated node array. This is not true when KFD device
initialization fails after probe.
For example, kgd2kfd_device_init() sets num_nodes before checking
PCIe atomics support. On Polaris systems without the required atomics,
it returns before allocating nodes[0], but the kfd_dev remains attached
to the amdgpu device. A later GPU reset then dereferences nodes[0]->id.
Require the authoritative KFD initialization flag before walking the
node array, matching the existing KFD reset and teardown paths.
(cherry picked from commit 4ac1835823c47903fbb278bbf474773c46f59edc) |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: hold net_device reference under RCU in bundle creation
xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into
a local pointer without taking a device reference, then pass it to
xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via
dst_dev_put() and frees the old net_device, causing a use-after-free
when xfrm6_fill_dst() later dereferences the stale dev pointer.
BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860
(net/ipv6/xfrm6_policy.c:86 netdev_hold())
Read of size 8 at addr ffff8880142fe588 by task exploit/153
Call Trace:
xfrm6_fill_dst+0x82c/0x860
xfrm_resolve_and_create_bundle+0x21d4/0x2bd0
xfrm_lookup_with_ifid+0x485/0x1640
ip6_dst_lookup_flow+0x19b/0x1e0
udpv6_sendmsg+0x1443/0x2dd0
Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU
read-side critical section active until xfrm_fill_dst() has taken the
required device references. |
| An issue in the ConfirmNameConstraints() function (wolfcrypt/src/asn.c) of wolfSSL v5.9.1 and v5.9.2 allows attackers to cause a Denial of Service (DoS) via providing crafted Certificate Authority certificates, leading to valid certificates without SAN to be incorrectly rejected by wolfSSL-based TLS clients. |
| When parsing a Range header containing a large number of small ranges, FileServer(FS), ServeContent, and ServeFile(FS) can consume an excessive amount of CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate curve data length in the calibration curve converters
p54_convert_rev0() and p54_convert_rev1() read calibration curve
data from the device-supplied EEPROM entry using channel and
points-per-channel counts taken verbatim from that same entry, so
an entry that declares more data than it carries drives an
out-of-bounds read past the EEPROM buffer (verified with a KASAN
reproducer of the conversion loop). The sibling converters
p54_convert_output_limits() and p54_convert_db() already validate
their counts against the entry length; this path was missed.
Reject the entry when the counts do not fit in the entry data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: release runtime PM ref on regdomain config failure
wlcore_regdomain_config() gets a runtime PM reference before sending
the regulatory-domain command. When
wlcore_cmd_regdomain_config_locked() fails, the function queues recovery
and returns without dropping that reference.
Release the reference after handling the command result so both success
and failure paths balance the preceding
pm_runtime_resume_and_get(). The recovery worker takes a separate
runtime PM reference and cannot release the reference held here. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix UAF in lbtf_free_adapter()
lbtf_free_adapter() calls lbtf_free_cmd_buffer() to free the command
buffers before calling timer_delete_sync() to wait for the command
timer callback. If the timer callback (command_timer_fn) is already
running when lbtf_free_cmd_buffer() frees the command array, the
callback dereferences priv->cur_cmd->cmdbuf which points to freed
memory.
Swap the order so that timer_delete_sync() runs first, ensuring any
in-flight callback has completed before the command buffers are freed. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pwm-fan) Stop RPM timer before freeing tach data
sample_timer() rearms the RPM timer and accesses the devm-managed
ctx->tachs and ctx->pulses_per_revolution arrays. The cleanup action
which stops the timer is registered before those arrays are allocated.
Since devres releases entries in reverse order, driver detach can free
the arrays before pwm_fan_cleanup() shuts down the timer. A timer expiry
in that window accesses the freed tach data.
With a KASAN kernel, a test-only kprobe delayed entry to
pwm_fan_cleanup() while normal sysfs unbind ran. Each of three runs
reported three four-byte reads and two four-byte writes in sample_timer()
after its backing devm allocations had been freed. The helper did not
invoke the timer callback, cleanup actions or free functions.
With the fix, three matching unbind runs completed without KASAN, BUG,
WARNING, Oops or panic. Instrumentation confirmed that timer retirement
completed before the first timer backing allocation was released.
Split timer retirement from the power cleanup and register its devres
action after the timer backing data and IRQ actions are installed. This
preserves the early power rollback action while ensuring the timer is
retired before its backing data is released. Use timer_shutdown_sync()
because the callback can rearm itself. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (hp-wmi-sensors) Fix use-after-free in fungible_show()
nsensor->current_state is dynamically replaced as the sensor's state
changes. update_numeric_sensor_from_wobj() does this by freeing the
old string and installing a new one:
if (strcmp(trimmed, nsensor->current_state)) {
new_string = hp_wmi_strdup(dev, trimmed);
if (new_string) {
devm_kfree(dev, nsensor->current_state);
nsensor->current_state = new_string;
}
}
This function is only ever called from hp_wmi_update_info() while
state->lock is held, so the free-and-replace itself is properly
serialized against concurrent updates.
fungible_show(), however, reads the same pointer after the lock has
already been dropped:
err = hp_wmi_update_info(state, info);
if (err)
return err;
switch (prop) {
...
case HP_WMI_PROPERTY_CURRENT_STATE:
seq_printf(seqf, "%s\n", nsensor->current_state);
break;
hp_wmi_update_info() takes state->lock internally and releases it
before returning, so by the time fungible_show() dereferences
nsensor->current_state in seq_printf(), no lock is held. Two
processes reading a sensor's current_state debugfs entry at
overlapping times (or one reading it while another read of the same
sensor triggers a refresh) can race: one thread's seq_printf() can
be part-way through printing the string at the moment another
thread's call into update_numeric_sensor_from_wobj() frees it with
devm_kfree() and installs a new pointer, causing a use-after-free
read.
Take state->lock around the read in fungible_show() as well, so it
can never run concurrently with the free-and-replace in
update_numeric_sensor_from_wobj(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access
mr_check_range() validates that [iova, iova+length) falls within the
registered MR range using wraparound-prone arithmetic:
if (iova < mr->ibmr.iova ||
iova + length > mr->ibmr.iova + mr->ibmr.length)
A remote peer can craft an RDMA-Write/Read RETH so that iova + length
wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the
check. rxe_mr_iova_to_index() then computes a huge index (int idx, only
guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences
mr->page_info[huge], causing an out-of-bounds read/write and a kernel
oops that is triggerable by an unauthenticated remote peer.
Rewrite the check in overflow-safe form; the first two clauses guarantee
that the subsequent subtractions do not underflow:
if (iova < mr->ibmr.iova ||
length > mr->ibmr.length ||
iova - mr->ibmr.iova > mr->ibmr.length - length)
With the fix, mr_check_range() returns -EINVAL for the crafted iova and
the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept
We need to clear cep before release state_lock as siw_qp_llp_close and
siw_qp_modify->siw_qp_llp_close did.
Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock
is released before the error path cleanup. A concurrent ibv_modify_qp()
transitioning the QP to ERROR can race in this window:
siw_accept() ibv_modify_qp(ERROR)
---------------------- ----------------------
siw_qp_modify() fails
up_write(&qp->state_lock)
down_write(&qp->state_lock)
nextstate_from_idle():
if (qp->cep)
siw_cep_put(qp->cep) <- frees cep
qp->cep = NULL
goto error
cep->qp = NULL <- UAF
Clear qp->cep and drop the association reference taken by siw_cep_get(),
all under the write lock held from the initial down_write(&qp->state_lock).
Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free
the cep before siw_accept() is done with it. |
