| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| EasyFlow .NET and EasyFlow AiNet, developed by Digiwin, has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to obtain database administrator credentials via a specific functionality. |
| A low privileged remote attacker can corrupt the webserver users storage on the device by setting a sequence of unsupported characters which leads to deletion of all previously configured users and the creation of the default Administrator with a known default password. |
| Autocaliweb is a web app that offers an interface for browsing, reading, and downloading eBooks using a valid Calibre database. Prior to version 0.8.3, the debug pack generated by Autocaliweb can expose sensitive configuration data, including API keys. This occurs because the to_dict() method, used to serialize configuration for the debug pack, doesn't adequately filter out sensitive fields such as API tokens. Users, unaware of the full contents, might share these debug packs, inadvertently leaking their private API keys. This issue has been patched in version 0.8.3. |
| Framelink Figma MCP Server before 0.6.3 allows an unauthenticated remote attacker to execute arbitrary operating system commands via a crafted HTTP POST request with shell metacharacters in input that is used by a fetchWithRetry curl command. The vulnerable endpoint fails to properly sanitize user-supplied input, enabling the attacker to inject malicious commands that are executed with the privileges of the MCP process. Exploitation requires network access to the MCP interface. |
| GPMAW 14, a bioinformatics software, has a critical vulnerability related to insecure file permissions in its installation directory. The directory is accessible with full read, write, and execute permissions for all users, allowing unprivileged users to manipulate files within the directory, including executable files like GPMAW3.exe, Fragment.exe, and the uninstaller GPsetup64_17028.exe. An attacker with user-level access can exploit this misconfiguration by replacing or modifying the uninstaller (GPsetup64_17028.exe) with a malicious version. While the application itself runs in the user's context, the uninstaller is typically executed with administrative privileges when an administrator attempts to uninstall the software. By exploiting this flaw, an attacker could gain administrative privileges and execute arbitrary code in the context of the admin, resulting in privilege escalation. |
| A flaw was found in the Red Hat Advanced Cluster Security (RHACS) portal. When rendering a table view in the portal, for example, on any of the /main/configmanagement/* endpoints, the front-end generates a DOM table-element (id="pdf-table"). This information is then populated with unsanitized data using innerHTML. An attacker with some control over the data rendered can trigger a cross-site scripting (XSS) vulnerability. |
| A non-primary administrator user with admin rights to the web interface but without shell access permissions can display configuration of the device including the master admin password. This vulnerability also allows the user to give themselves shell access with the root gid. |
| The Archify application contains a local privilege escalation vulnerability due to insufficient client validation in its privileged helper tool, com.oct4pie.archifyhelper, which is exposed via XPC. Archify follows the "factored applications" model, delegating privileged operations—such as arbitrary file deletion and file permission changes—to this helper running as root. However, the helper does not verify the code signature, entitlements, or signing flags of the connecting client. Although macOS provides secure validation mechanisms like auditToken, these are not implemented. As a result, any local process can establish a connection to the helper and invoke privileged functionality, leading to unauthorized execution of actions with root-level privileges. |
| A crafted response from an upstream server the recursor has been configured to forward-recurse to can cause a Denial of Service in the Recursor. The default configuration of the Recursor does not use recursive forwarding and is not affected. |
| A cross-site scripting (XSS) vulnerability in the PdfViewer component of Agenzia Impresa Eccobook 2.81.1 allows attackers to execute arbitrary web scripts or HTML via injecting a crafted payload into the Temp parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: VMX: Fix crash due to uninitialized current_vmcs
KVM enables 'Enlightened VMCS' and 'Enlightened MSR Bitmap' when running as
a nested hypervisor on top of Hyper-V. When MSR bitmap is updated,
evmcs_touch_msr_bitmap function uses current_vmcs per-cpu variable to mark
that the msr bitmap was changed.
vmx_vcpu_create() modifies the msr bitmap via vmx_disable_intercept_for_msr
-> vmx_msr_bitmap_l01_changed which in the end calls this function. The
function checks for current_vmcs if it is null but the check is
insufficient because current_vmcs is not initialized. Because of this, the
code might incorrectly write to the structure pointed by current_vmcs value
left by another task. Preemption is not disabled, the current task can be
preempted and moved to another CPU while current_vmcs is accessed multiple
times from evmcs_touch_msr_bitmap() which leads to crash.
The manipulation of MSR bitmaps by callers happens only for vmcs01 so the
solution is to use vmx->vmcs01.vmcs instead of current_vmcs.
BUG: kernel NULL pointer dereference, address: 0000000000000338
PGD 4e1775067 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
...
RIP: 0010:vmx_msr_bitmap_l01_changed+0x39/0x50 [kvm_intel]
...
Call Trace:
vmx_disable_intercept_for_msr+0x36/0x260 [kvm_intel]
vmx_vcpu_create+0xe6/0x540 [kvm_intel]
kvm_arch_vcpu_create+0x1d1/0x2e0 [kvm]
kvm_vm_ioctl_create_vcpu+0x178/0x430 [kvm]
kvm_vm_ioctl+0x53f/0x790 [kvm]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x5c/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| IBM Sterling Connect:Direct for UNIX Container 6.3.0.0 through 6.3.0.6 Interim Fix 016, and 6.4.0.0 through 6.4.0.3 Interim Fix 019 IBM® Sterling Connect:Direct for UNIX contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: avoid SBSA UART accessing DMACR register
Chapter "B Generic UART" in "ARM Server Base System Architecture" [1]
documentation describes a generic UART interface. Such generic UART
does not support DMA. In current code, sbsa_uart_pops and
amba_pl011_pops share the same stop_rx operation, which will invoke
pl011_dma_rx_stop, leading to an access of the DMACR register. This
commit adds a using_rx_dma check in pl011_dma_rx_stop to avoid the
access to DMACR register for SBSA UARTs which does not support DMA.
When the kernel enables DMA engine with "CONFIG_DMA_ENGINE=y", Linux
SBSA PL011 driver will access PL011 DMACR register in some functions.
For most real SBSA Pl011 hardware implementations, the DMACR write
behaviour will be ignored. So these DMACR operations will not cause
obvious problems. But for some virtual SBSA PL011 hardware, like Xen
virtual SBSA PL011 (vpl011) device, the behaviour might be different.
Xen vpl011 emulation will inject a data abort to guest, when guest is
accessing an unimplemented UART register. As Xen VPL011 is SBSA
compatible, it will not implement DMACR register. So when Linux SBSA
PL011 driver access DMACR register, it will get an unhandled data abort
fault and the application will get a segmentation fault:
Unhandled fault at 0xffffffc00944d048
Mem abort info:
ESR = 0x96000000
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x00: ttbr address size fault
Data abort info:
ISV = 0, ISS = 0x00000000
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000020e2e000
[ffffffc00944d048] pgd=100000003ffff803, p4d=100000003ffff803, pud=100000003ffff803, pmd=100000003fffa803, pte=006800009c090f13
Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP
...
Call trace:
pl011_stop_rx+0x70/0x80
tty_port_shutdown+0x7c/0xb4
tty_port_close+0x60/0xcc
uart_close+0x34/0x8c
tty_release+0x144/0x4c0
__fput+0x78/0x220
____fput+0x1c/0x30
task_work_run+0x88/0xc0
do_notify_resume+0x8d0/0x123c
el0_svc+0xa8/0xc0
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x1a0/0x1a4
Code: b9000083 b901f001 794038a0 8b000042 (b9000041)
---[ end trace 83dd93df15c3216f ]---
note: bootlogd[132] exited with preempt_count 1
/etc/rcS.d/S07bootlogd: line 47: 132 Segmentation fault start-stop-daemon
This has been discussed in the Xen community, and we think it should fix
this in Linux. See [2] for more information.
[1] https://developer.arm.com/documentation/den0094/c/?lang=en
[2] https://lists.xenproject.org/archives/html/xen-devel/2022-11/msg00543.html |
| An issue was discovered on Epson Expression Home XP255 20.08.FM10I8 devices. POST requests don't require (anti-)CSRF tokens or other mechanisms for validating that the request is from a legitimate source. In addition, CSRF attacks can be used to send text directly to the RAW printer interface. For example, an attack could deliver a worrisome printout to an end user. |
| The cbis_manager Podman container is vulnerable to remote command execution via the /api/plugins endpoint. Improper sanitization of the HTTP Headers X-FILENAME, X-PAGE, and X-FIELD allows for command injection. These headers are directly utilized within the subprocess.Popen Python function without adequate validation, enabling a remote attacker to execute arbitrary commands on the underlying system by crafting malicious header values within an HTTP request to the affected endpoint.
The web service executes with root privileges within the container environment, the demonstrated remote code execution permits an attacker to acquire elevated privileges for the command execution.
Restricting access to the management network with an external firewall can partially mitigate this risk. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix monitor mode bringup crash
When the interface is brought up in monitor mode, it leads
to NULL pointer dereference crash. This crash happens when
the packet type is extracted for a SKB. This extraction
which is present in the received msdu delivery path,is
not needed for the monitor ring packets since they are
all RAW packets. Hence appending the flags with
"RX_FLAG_ONLY_MONITOR" to skip that extraction.
Observed calltrace:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000064
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048517000
[0000000000000064] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in: ath11k_pci ath11k qmi_helpers
CPU: 2 PID: 1781 Comm: napi/-271 Not tainted
6.1.0-rc5-wt-ath-656295-gef907406320c-dirty #6
Hardware name: Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k]
lr : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x5c/0x60 [ath11k]
sp : ffff80000ef5bb10
x29: ffff80000ef5bb10 x28: 0000000000000000 x27: ffff000007baafa0
x26: ffff000014a91ed0 x25: 0000000000000000 x24: 0000000000000000
x23: ffff800002b77378 x22: ffff000014a91ec0 x21: ffff000006c8d600
x20: 0000000000000000 x19: ffff800002b77740 x18: 0000000000000006
x17: 736564203634343a x16: 656e694c20657079 x15: 0000000000000143
x14: 00000000ffffffea x13: ffff80000ef5b8b8 x12: ffff80000ef5b8c8
x11: ffff80000a591d30 x10: ffff80000a579d40 x9 : c0000000ffffefff
x8 : 0000000000000003 x7 : 0000000000017fe8 x6 : ffff80000a579ce8
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 3a35ec12ed7f8900 x1 : 0000000000000000 x0 : 0000000000000052
Call trace:
ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k]
ath11k_dp_rx_deliver_msdu.isra.42+0xa4/0x3d0 [ath11k]
ath11k_dp_rx_mon_deliver.isra.43+0x2f8/0x458 [ath11k]
ath11k_dp_rx_process_mon_rings+0x310/0x4c0 [ath11k]
ath11k_dp_service_srng+0x234/0x338 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xb8 [ath11k]
__napi_poll+0x5c/0x190
napi_threaded_poll+0xf0/0x118
kthread+0xf4/0x110
ret_from_fork+0x10/0x20
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| An issue was discovered on certain Nuki Home Solutions devices. The HTTP API exposed by a Bridge used an unencrypted channel to provide an administrative interface. A token can be easily eavesdropped by a malicious actor to impersonate a legitimate user and gain access to the full set of API endpoints. This affects Nuki Bridge v1 before 1.22.0 and v2 before 2.13.2. |
| An issue was discovered on certain Nuki Home Solutions devices. Lack of certificate validation on HTTP communications allows attackers to intercept and tamper data. This affects Nuki Smart Lock 3.0 before 3.3.5, Nuki Bridge v1 before 1.22.0 and Nuki Bridge v2 before 2.13.2. |
| An issue was discovered on certain Nuki Home Solutions devices. By sending a malformed HTTP verb, it is possible to force a reboot of the device. This affects Nuki Bridge v1 before 1.22.0 and v2 before 2.13.2. |
| An issue was discovered on certain Nuki Home Solutions devices. Some BLE commands, which should have been designed to be only called from privileged accounts, could also be called from unprivileged accounts. This demonstrates that no access controls were implemented for the different BLE commands across the different accounts. This affects Nuki Smart Lock 3.0 before 3.3.5 and Nuki Smart Lock 2.0 before 2.12.4. |