| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, decoding a strip TIFF using CCITT Group 3 or Modified Huffman compression can pass attacker-expanded runs to BitWriterUtils.WriteBits without first checking the current row width. T4TiffCompression.WritePixelRun can accumulate oversized makeup-code runs, and ModifiedHuffmanTiffCompression.Decompress validates the width only after writing. The unchecked writes can overflow the strip buffer, corrupt heap memory, and terminate the process. This strip-path vulnerability is distinct from the tiled decompressor-width mismatch. This issue is fixed in version 4.1.1. |
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, tiled TIFF decoding allocates a destination buffer using TileWidth but TiffDecompressorsFactory.Create constructs T4, T6, and Modified Huffman decompressors using the full frame width. TiffDecoderCore.DecodeTilesChunky can therefore direct frame-width fax scanlines into a tile-width buffer when TileWidth is smaller than ImageWidth. The mismatch causes attacker-controlled out-of-bounds writes, heap corruption, and process termination even with legal per-row run codes. This tiled-path vulnerability is distinct from oversized CCITT runs in strip decoding. This issue is fixed in version 4.1.1. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix out-of-bounds write in gud_plane_atomic_check()
The plane property loop uses req->properties[num_properties + i] as write
index while simultaneously incrementing `num_properties` inside the loop.
At iteration i, num_properties has also incremented by i, so the write
is done at `initial_num_properties + 2*i`, skipping every other index and
advancing by 2 per iteration.
With just 2 connector and 32 plane properties the last write happens at
index 64, one slot past the end of the 64-slot (indices 0–63)
allocation. A USB device can trigger OOB by advertising the maximum
number of properties.
Fix by dropping the redundant `+ i`; num_properties is already the correct
running index, as gud_connector_fill_properties() fills the preceding
slots. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix runt reassembly panic from short inner tot_len
When the start of an inner packet is split across two outer packets
such that fewer than 4 bytes land at the end of the first one,
__input_process_payload() saves those bytes as a runt and skips the
iplen/iphlen validation performed for in-place packets. When the
continuation packet arrives, iptfs_reassem_cont() only requires the
declared inner length to be >= sizeof(ra_runt) (6) before allocating
the reassembly skb with that attacker-controlled length.
However, __iptfs_iphlen() always returns the fixed minimum IP header
size (20 for IPv4, 40 for IPv6), so for an inner IPv4 tot_len in
[6, 19] the header-completion copy writes past the declared packet
length, and the subsequent "ipremain -= copylen" underflows to ~4GB,
leaving the payload copy length bounded only by blkoff (up to 64KB).
At runtime the skb_put() tailroom check turns this into
skb_over_panic(), i.e. an unprivileged kernel panic (DoS), reachable
locally via userns+netns IPTFS SAs and remotely against IPTFS VPN
gateways when the decrypted outer skb is linear (e.g. AF_PACKET taps,
tun/tap delivery).
Align the runt path with the normal path by requiring the declared
inner length to cover at least the IP header size. This also subsumes
the previous >= sizeof(ra_runt) check, since the minimum IP header
is always larger than the runt buffer.
This issue was found by the autokbug dynamic kernel fuzzer at
Tencent Yunding Lab. |
| On affected Arista access points with Wireless Intrusion Prevention System (WIPS) active, an unauthenticated attacker within radio frequency (RF) proximity can send a crafted frame to crash the sensor service, disabling WIPS monitoring on the access point, or potentially achieve remote code execution. No wireless association or authentication is required. |
| In AMD Versal™ Adaptive SoC devices, insufficient boundary checks in USB boot mode—when enabled through board modifications—could allow crafted images to trigger a buffer overflow and overwrite an active function pointer, which may result in arbitrary code execution during boot process. This condition could lead to potential impacts on confidentiality, integrity, and availability. |
| A flaw was found in SSSD's NFS idmap plugin. When retrieving cached user or group names, the plugin detects if an entry exceeds the destination buffer size but fails to abort before copying data. A local attacker can trigger this vulnerability by requesting identity lookups that resolve to oversized cached entries, resulting in an out-of-bounds write. This flaw primarily leads to a Denial of Service (DoS) by crashing the identity mapping service, and may also corrupt adjacent process memory. |
| Insufficient boundary validation in the USB boot mode implementation of AMD Zynq™ UltraScale+ MPSoC and RFSoC devices could allow unbounded Device Firmware Upgrade (DFU) download requests to overflow the DDR receive buffer into FSBL memory, potentially resulting in unauthorized code execution during the boot process. This issue could impact the confidentiality, integrity, or availability of affected system. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_tunnel: initialize `options_len` before referencing options
The following command triggers a kernel panic:
ip link add d0 type dummy; ip link set d0 up
ip route add 10.30.0.0/16 \
encap ip id 300 geneve_opts 4660:66:11223344 dev d0
memcpy: detected buffer overflow: 4 byte write of buffer size 0
kernel BUG at lib/string_helpers.c:1044!
...
ip_tun_parse_opts.part.0.cold+0x10/0x10
ip_tun_build_state+0x116/0x2a0
On kernels built with GCC 15+ and `CONFIG_FORTIFY_SOURCE`, the fortified
`memcpy()` got 0 sized destination with request of 4 bytes length:
static int ip_tun_parse_opts_geneve(...)
{
...
attr = tb[LWTUNNEL_IP_OPT_GENEVE_DATA];
data_len = nla_len(attr); /* == 4 */
struct geneve_opt *opt = ip_tunnel_info_opts(info) + opts_len;
memcpy(opt->opt_data, nla_data(attr), data_len);
/* ^^^^^^^^^^^^^ 0 since options_len is assigned afterwards */
Fixed by initializing the counter before the options are referenced.
Matching what `tunnel_key_opts_set()` already does. |
| Vim is an open source, command line text editor. Prior to 9.2.0846, set_sofo() in src/spellfile.c reuses sl_sal_first[] without resetting values left by set_sal_first(), so a crafted spell file containing an SN_SAL section before an SN_SOFO section causes under-counted mapping lists and attacker-influenced writes beyond a heap allocation. This issue is fixed in version 9.2.0846. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: prevent buffer overflow in page_pool allocation
The per‑processor buffering scheme is supported only if the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8).
This is already checked in mvpp2_probe() during the initial
activation of percpu_pools.
However, mvpp2_change_mtu() may later call
mvpp2_bm_switch_buffers(priv, true) without this check, which can
lead to an out-of-bounds access in the priv->page_pool array in
mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ
entries, and mvpp2_get_nrxqs() may return exactly that value. The
per-CPU scheme then doubles it to nrxqs * 2, exceeding the array
bounds.
Check that the hardware version is MVPP22 or newer and that the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS
before switching to per-CPU mode.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) increase number of phases and add new mask
Increase the number of phases to 16 as a new upcoming device supports
such a number.
While at it, add a new mask for controlling the source of the output
voltage.
Note (groeck):
This patch was meant to prepare for support of MAX20826 and compatible
devices, which support more than 10 phases per page. However, Sashiko
reports that the mp2975 driver already supports up to 14 phases, and the
mp2856 driver supports up to 12 phases. This already has the potential for
out-of-bounds writes when probing the affected chips, making this patch a
bug fix. |
| GNU Aspell prezip-bin contains a heap-based buffer overflow vulnerability in the decompressor in prog/prezip.c. The decompressor does not properly check buffer space, so a crafted compressed file can cause out-of-bounds read and write operations on the heap. An attacker who convinces a user to process a malicious compressed file with prezip-bin can trigger memory corruption, leading to a processs crash.
This issue was fixed in commit 15b188437f9e0192d4ac4472ad66a4e2f62a782f which will be released in version 0.60.8.3. |
| Privilege escalation due to incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Privilege escalation due to incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Privilege escalation due to incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Privilege escalation due to incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Privilege escalation due to incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Privilege escalation due to incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Privilege escalation due to incorrect boundary conditions in the Graphics component. This vulnerability was fixed in Firefox ESR 115.41, Firefox ESR 140.16, and Thunderbird 140.16. |
