| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: safely drain sessions during logoff
SMB3 multichannel allows requests for one session to run on multiple
connections. Wait for all channels bound to a session before freeing
shared session objects.
A deferred byte-range lock remains counted as a running request and only
wakes when its file closes. Wake blocked locks during the drain without
unpublishing or modifying their file objects. Synchronous CANCEL requests
must invoke their cancellation callback to wake pending operations, while
CHANGE_NOTIFY completion remains specific to the asynchronous path.
Serialize session teardown with channel registration and previous-session
cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and
connection teardown invoke cancellation callbacks only once. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: ibss: wait for in-flight TX on disconnect
While leaving an IBSS in ieee80211_ibss_disconnect() mac80211 flushes
stations, turns the carrier off and immediately tells the driver to
leave as well. While there may be synchronize_net() in station flush
and in this code later, packets can still be transmitted due to
cross-CPU race conditions after carrier off is set.
Therefore, it's possible for a race to happen where a TX to the
driver occurs while or after telling it to leave the IBSS. This can
be confusing to drivers, and in the case of iwlwifi leads to an
attempt to use invalid queues.
Move netif_carrier_off() to occur before sta_info_flush() during
IBSS disconnect, and add synchronize_net() if flushing didn't,
so that the synchronize_net() always happens between turning the
carrier off and telling the driver, avoiding this race. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: plda: Protect root bus removal with rescan lock
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: prevent race between disconnect() and rtx
Sashiko noted that the two event can race, leading to inconsistent
status. Prevent the race using the synchronous timer stop operation. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race
Commit ba7425312607 ("mm, slab: add an optimistic
__slab_try_return_freelist()") incorrectly assumed that nobody has freed
an object to the slab as long as slab->freelist is NULL and cmpxchg
succeeds.
However, as reported by Hyunwoo Kim [1], other CPUs might have freed
an object to the slab, insert the slab to the partial list, then
allocated an object from the slab, and be in the middle of removing
the slab from the list under n->list_lock.
Since __refill_objects_node() puts the slab back on pc.slabs
outside n->list_lock, it might insert the slab into that list while
the slab is concurrently being removed from n->partial.
This led to a list corruption [1]:
list_add corruption. next->prev should be prev
(ffff888100000248), but was dead000000000122.
(next=ffffea000416e410).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted
7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy)
RIP: 0010:__list_add_valid_or_report+0x80/0xd0
...
Call Trace:
alloc_from_new_slab+0x183/0x300
___slab_alloc+0x31c/0x890
__kmalloc_noprof+0x3d4/0x800
lsm_blob_alloc+0x2d/0x50
security_msg_msg_alloc+0x26/0x90
load_msg+0x1aa/0x210
do_msgsnd+0x91/0x800
do_syscall_64+0x109/0x5d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Kernel panic - not syncing: Fatal exception
This is a classic ABA problem where cmpxchg succeeds but the state has
changed since __refill_objects_node() took the freelist from the slab.
As Vlastimil Babka mentioned [2], it should be rare to return more than
one slab (due to the racy read of slab->counters in
get_partial_node_bulk()). Therefore, instead of introducing additional
complexity, acquire and release n->list_lock twice in the worst case.
Return the slab directly to the partial list and hold n->list_lock
across the cmpxchg and add_partial(). This is similar to the initial
version of commit ba7425312607 [3]. This is enough to avoid the race as
the list manipulation is serialized by n->list_lock. While at it,
bring back unlikely() hint now that the condition is unlikely. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix racy access to FDP placement id array
nvme_query_fdp_info() is called per-path and therefore prone to races.
It populates head->nr_plids/head->plids for fdp registration.
But nothing protects that pair from concurrent access - two paths scanning
the same namespace can race to populate it.
Avoid the race by moving this initialization work to nvme_alloc_ns_head()
which is called once per shared namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix readahead synchronisation issues by loading all folios upfront
There are some synchronisation issues that derive from the app thread
adding more folios to the rolling buffer whilst the collector thread is
looking at them or trying to clear them, such as determining the setting of
front_folio_order when the next folio hasn't been added yet,
The reason for the rolling buffer approach is that loading the buffer
upfront and then dropping all the refs just acquired is quite a slow
operation, and loading progressively allows some of the cost to be deferred
until after at least some of the I/O is started.
Instead, a better way is to load all the folios into the rolling buffer
upfront - and then drop the refs later, once the I/O is in progress. (Even
better would be for the refs not to be there at all.)
Fix this by changing the rolling buffer loader to load all the folios
selected by the VM for readahead upfront into the folio queue. The folio
queue is allocated a batch worth at a time as we don't know how many folios
are involved (the readahead_control struct, alas, has a page count, not a
folio count).
The folio refs acquired from readahead are then dropped in bulk once the
first subrequest is dispatched as it's quite a slow operation. The
collector waits for NETFS_RREQ_NEED_PUT_RA_REFS to be cleared so that it
doesn't unlock folios before the xarray has been scanned for them.
This simplifies the buffer handling later and isn't noticeably slower as
the xarray doesn't need to be modified and the folios are all already
pre-locked. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix subbuf resize races with trace_pipe_raw readers
Concurrent subbuffer resizes may crash trace_pipe_raw readers or leak
uninitialized memory to userspace due to stale size values.
Modify ring_buffer_alloc_read_page() to handle the resizing of an
existing buffer_data_read_page if necessary and add a new
ring_buffer_read_page_size(). This new function enables ring-buffer
buffer_data_read_page users to not call the racy
ring_buffer_subbuf_size_get(). This makes the spare_size member of
ftrace_buffer_info redundant.
Finally, handle buffer_data_read_page/reader_page order discrepancy in
ring_buffer_read_page(). On a mismatch simply copy manually the data to
the buffer_data_read_page. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: perf: Retrieve path and source from event data
ETM perf callbacks currently use the per-CPU csdev_src pointer, which
can race with updates during device registration and unregistration.
The AUX setup already builds and stores the path in the event data.
Use this path to retrieve the source instead of csdev_src to avoid
the race.
Export coresight_get_source() and add etm_event_get_ctxt_path() to
retrieve the context's path and its source with READ_ONCE() /
WRITE_ONCE() accessors. Give the comments to explain why this
approach is safe when pause or resume callbacks preempt the disable
callback (e.g. via NMI). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/alternatives: Exclude text poking against change_page_attr()
From time to time, the following BUG can be observed
in the x86 alternatives patching code [0]:
> kernel BUG at arch/x86/kernel/alternative.c:2576!
> Oops: invalid opcode: 0000 [#1] SMP NOPTI
> CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
> RIP: 0010:__text_poke+0x2aa/0x450
> Call Trace:
> <TASK>
> smp_text_poke_batch_finish+0x2a7/0x320
> __static_call_transform+0xb7/0x220
> arch_static_call_transform+0x5b/0xb0
> __static_call_init+0xe9/0x270
> static_call_module_notify+0x11f/0x150
> notifier_call_chain+0x61/0xe0
> blocking_notifier_call_chain_robust+0x63/0xc0
> load_module+0x1c92/0x20c0
> init_module_from_file+0xd8/0x140
> idempotent_init_module+0x100/0x2f0
> __x64_sys_finit_module+0x71/0xe0
> do_syscall_64+0xe1/0x610
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
which matches the following BUG_ON() in alternative.c:
/*
* If something went wrong, crash and burn since recovery paths are not
* implemented.
*/
BUG_ON(!pages[0] || (cross_page_boundary && !pages[1]));
This can happen if vmalloc_to_page() fails, for any reason. Such can happen
if text poking races with CPA, which can possibly result in the collapsing
of page tables (or breaking of PMD hugepages). It is not a problem for most
users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when
CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc
range, and can call set_memory_*() in parallel on it. This can happen to
race against __text_poke and cause havoc in vmalloc_to_page().
Fix it by excluding against CPA using the init_mm mmap read lock.
[ dhansen: Fix up SoB ordering. The actual code flow here was:
Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain
now. I *believe* Mike simply picked up Lorenzo's update to
Pedro's post from the Link ] |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: defer rq_argp and rq_resp free until after RCU grace period
svc_rqst_free() frees rqstp->rq_argp and rqstp->rq_resp synchronously
via kfree(), but defers the rqstp struct free via kfree_rcu(). After
svc_exit_thread() calls list_del_rcu() and svc_rqst_free(), there is
a window where RCU readers that started before list_del_rcu() can still
traverse the thread list and find the rqstp. These readers (e.g.
nfsd_nl_rpc_status_get_dumpit()) dereference rqstp->rq_argp, which has
already been freed — a use-after-free.
Fix this by moving the kfree of rq_argp and rq_resp into an explicit
call_rcu() callback alongside the struct free. Resources not accessed
by RCU readers (bvec, buffer pages, scratch folio, auth_data) remain
synchronously freed. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Replace waitqueue and flag with completion
The driver previously used a waitqueue along with an explicit
request_done flag, but without proper barriers around request_done.
An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted
to fix this by adding the missing memory barriers. Rather than
adding the barriers, this patch replaces the waitqueue+flag with
a completion, which is designed for this exact purpose. |
| A race condition in the ZPA tunnel handler of affected versions of Zscaler Client Connector (ZCC) allows a heap corruption, resulting in a denial of service (client crash) and potentially arbitrary code execution in the context of the ZCC process. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock
list_for_each_entry() iterates ci->i_cap_flush_list but drops
i_ceph_lock to send cap messages. During the unlock window,
handle_cap_flush_ack() can acquire i_ceph_lock, detach cf entries
with tid <= flush_tid from the list, release i_ceph_lock, and free
them via ceph_free_cap_flush() outside any lock. When the original
thread reacquires i_ceph_lock and the for-loop macro advances via
cf = list_next_entry(cf, i_list), it dereferences cf->i_list.next
on freed memory.
The race timeline:
__kick_flushing_caps() handle_cap_flush_ack()
----------------------- -----------------------
holds i_ceph_lock <---
iterates to cf (tid=10)
prepares FLUSH message
drops i_ceph_lock <---
__send_cap() ── FLUSH(tid=10)
MDS sends FLUSH_ACK(tid=10)
---> acquires i_ceph_lock
cf->tid(10) <= flush_tid(10),
detaches cf from i_cap_flush_list
drops i_ceph_lock
ceph_free_cap_flush(cf) <- frees it!
acquires i_ceph_lock <---
for-loop advances:
cf = list_next_entry(cf, i_list)
-- UAF on freed cf->i_list.next
The cf was just sent by __kick_flushing_caps itself via __send_cap().
The MDS may respond with FLUSH_ACK quickly enough that
handle_cap_flush_ack() frees cf before __kick_flushing_caps can
finish the iteration.
Fix by converting to a manual while loop: save the next pointer
under i_ceph_lock before dropping it, then use the saved pointer
after reacquiring, so the potentially-freed cf is never accessed again. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: Fix locking when accessing mr->pd
Sashiko points out that, due to rereg_mr, the PD is actually variable and
all the touches in nldev are racy.
Use mr->device instead of mr->pd->device.
Getting the PD restrack ID is more tricky. To avoid disturbing all the
happy paths, add an rdma_restrack_sync() operation which is sort of like
flush_workqueue() or synchronize_irq(): after it returns, all the old
nldev touches to the mr are gone and everything sees the new PD. This
makes it safe to reach into the PD pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring buffer readers
trace_buffer subbuf_size is read lockless in ring_buffer_read_page() and
ring_buffer_read_start(), while it can simultaneously be resized with
ring_buffer_subbuf_order_set().
Instead of trace_buffer::subbuf_size, use bpage::order in
ring_buffer_read_start() and ring_buffer_read_page().
In ring_buffer_read_start(), even with resize_disabled, there is still a
possibility of a race with a buffer modification. Hold the trace_buffer
mutex to synchronise with any pending ring buffer order modification.
trace_buffer::subbuf_size is now actually useless, remove it. Also,
create accessors rb_subbuf_capacity() and rb_page_capacity() which
return the actual size available for storing events, while
rb_subbuf_size() returns the actual subbuf page-size. |
| In the Linux kernel, the following vulnerability has been resolved:
quota: Fix race of dquot_scan_active() with quota deactivation
dquot_scan_active() can race with quota deactivation in
quota_release_workfn() like:
CPU0 (quota_release_workfn) CPU1 (dquot_scan_active)
============================== ==============================
spin_lock(&dq_list_lock);
list_replace_init(
&releasing_dquots, &rls_head);
/* dquot X on rls_head,
dq_count == 0,
DQ_ACTIVE_B still set */
spin_unlock(&dq_list_lock);
synchronize_srcu(&dquot_srcu);
spin_lock(&dq_list_lock);
list_for_each_entry(dquot,
&inuse_list, dq_inuse) {
/* finds dquot X */
dquot_active(X) -> true
atomic_inc(&X->dq_count);
}
spin_unlock(&dq_list_lock);
spin_lock(&dq_list_lock);
dquot = list_first_entry(&rls_head);
WARN_ON_ONCE(atomic_read(&dquot->dq_count));
The problem is not only a cosmetic one as under memory pressure the
caller of dquot_scan_active() can end up working on freed dquot.
Fix the problem by making sure the dquot is removed from releasing list
when we acquire a reference to it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: ensure safe access to master conntrack
Holding reference on the expectation is not sufficient, the master
conntrack object can just go away, making exp->master invalid.
To access exp->master safely:
- Grab the nf_conntrack_expect_lock, this gets serialized with
clean_from_lists() which also holds this lock when the master
conntrack goes away.
- Hold reference on master conntrack via nf_conntrack_find_get().
Not so easy since the master tuple to look up for the master conntrack
is not available in the existing problematic paths.
This patch goes for extending the nf_conntrack_expect_lock section
to address this issue for simplicity, in the cases that are described
below this is just slightly extending the lock section.
The add expectation command already holds a reference to the master
conntrack from ctnetlink_create_expect().
However, the delete expectation command needs to grab the spinlock
before looking up for the expectation. Expand the existing spinlock
section to address this to cover the expectation lookup. Note that,
the nf_ct_expect_iterate_net() calls already grabs the spinlock while
iterating over the expectation table, which is correct.
The get expectation command needs to grab the spinlock to ensure master
conntrack does not go away. This also expands the existing spinlock
section to cover the expectation lookup too. I needed to move the
netlink skb allocation out of the spinlock to keep it GFP_KERNEL.
For the expectation events, the IPEXP_DESTROY event is already delivered
under the spinlock, just move the delivery of IPEXP_NEW under the
spinlock too because the master conntrack event cache is reached through
exp->master.
While at it, add lockdep notations to help identify what codepaths need
to grab the spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add proper RCU protection to /proc/net/ptype
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - protect service table iterations with service_lock
The service_table list is protected by service_lock when entries are
added or removed (in adf_service_add() and adf_service_remove()), but
several functions iterate over the list without holding this lock.
A concurrent adf_service_register() or adf_service_unregister() call
could modify the list during traversal, leading to list corruption or
a use-after-free.
Fix this by holding service_lock across all list_for_each_entry()
iterations of service_table in adf_dev_init(), adf_dev_start(),
adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(),
adf_dev_restarted_notify(), and adf_error_notifier().
The lock ordering is safe: callers of the static helpers (adf_dev_up()
and adf_dev_down()) acquire state_lock before service_lock, and no
event_hld callback or service_lock holder ever acquires state_lock in
the reverse order. |
