| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, sometimes msl.c fails to update the stack index, so an image is stored in the wrong slot and never freed on error, causing leaks. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: don't check if plane->state->fb == state->fb
Currently, when using non-blocking commits, we can see the following
kernel warning:
[ 110.908514] ------------[ cut here ]------------
[ 110.908529] refcount_t: underflow; use-after-free.
[ 110.908620] WARNING: CPU: 0 PID: 1866 at lib/refcount.c:87 refcount_dec_not_one+0xb8/0xc0
[ 110.908664] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash aes_arm64 aes_generic algif_skcipher af_alg bnep hid_logitech_hidpp vc4 brcmfmac hci_uart btbcm brcmutil bluetooth snd_soc_hdmi_codec cfg80211 cec drm_display_helper drm_dma_helper drm_kms_helper snd_soc_core snd_compress snd_pcm_dmaengine fb_sys_fops sysimgblt syscopyarea sysfillrect raspberrypi_hwmon ecdh_generic ecc rfkill libaes i2c_bcm2835 binfmt_misc joydev snd_bcm2835(C) bcm2835_codec(C) bcm2835_isp(C) v4l2_mem2mem videobuf2_dma_contig snd_pcm bcm2835_v4l2(C) raspberrypi_gpiomem bcm2835_mmal_vchiq(C) videobuf2_v4l2 snd_timer videobuf2_vmalloc videobuf2_memops videobuf2_common snd videodev vc_sm_cma(C) mc hid_logitech_dj uio_pdrv_genirq uio i2c_dev drm fuse dm_mod drm_panel_orientation_quirks backlight ip_tables x_tables ipv6
[ 110.909086] CPU: 0 PID: 1866 Comm: kodi.bin Tainted: G C 6.1.66-v8+ #32
[ 110.909104] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 110.909114] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 110.909132] pc : refcount_dec_not_one+0xb8/0xc0
[ 110.909152] lr : refcount_dec_not_one+0xb4/0xc0
[ 110.909170] sp : ffffffc00913b9c0
[ 110.909177] x29: ffffffc00913b9c0 x28: 000000556969bbb0 x27: 000000556990df60
[ 110.909205] x26: 0000000000000002 x25: 0000000000000004 x24: ffffff8004448480
[ 110.909230] x23: ffffff800570b500 x22: ffffff802e03a7bc x21: ffffffecfca68c78
[ 110.909257] x20: ffffff8002b42000 x19: ffffff802e03a600 x18: 0000000000000000
[ 110.909283] x17: 0000000000000011 x16: ffffffffffffffff x15: 0000000000000004
[ 110.909308] x14: 0000000000000fff x13: ffffffed577e47e0 x12: 0000000000000003
[ 110.909333] x11: 0000000000000000 x10: 0000000000000027 x9 : c912d0d083728c00
[ 110.909359] x8 : c912d0d083728c00 x7 : 65646e75203a745f x6 : 746e756f63666572
[ 110.909384] x5 : ffffffed579f62ee x4 : ffffffed579eb01e x3 : 0000000000000000
[ 110.909409] x2 : 0000000000000000 x1 : ffffffc00913b750 x0 : 0000000000000001
[ 110.909434] Call trace:
[ 110.909441] refcount_dec_not_one+0xb8/0xc0
[ 110.909461] vc4_bo_dec_usecnt+0x4c/0x1b0 [vc4]
[ 110.909903] vc4_cleanup_fb+0x44/0x50 [vc4]
[ 110.910315] drm_atomic_helper_cleanup_planes+0x88/0xa4 [drm_kms_helper]
[ 110.910669] vc4_atomic_commit_tail+0x390/0x9dc [vc4]
[ 110.911079] commit_tail+0xb0/0x164 [drm_kms_helper]
[ 110.911397] drm_atomic_helper_commit+0x1d0/0x1f0 [drm_kms_helper]
[ 110.911716] drm_atomic_commit+0xb0/0xdc [drm]
[ 110.912569] drm_mode_atomic_ioctl+0x348/0x4b8 [drm]
[ 110.913330] drm_ioctl_kernel+0xec/0x15c [drm]
[ 110.914091] drm_ioctl+0x24c/0x3b0 [drm]
[ 110.914850] __arm64_sys_ioctl+0x9c/0xd4
[ 110.914873] invoke_syscall+0x4c/0x114
[ 110.914897] el0_svc_common+0xd0/0x118
[ 110.914917] do_el0_svc+0x38/0xd0
[ 110.914936] el0_svc+0x30/0x8c
[ 110.914958] el0t_64_sync_handler+0x84/0xf0
[ 110.914979] el0t_64_sync+0x18c/0x190
[ 110.914996] ---[ end trace 0000000000000000 ]---
This happens because, although `prepare_fb` and `cleanup_fb` are
perfectly balanced, we cannot guarantee consistency in the check
plane->state->fb == state->fb. This means that sometimes we can increase
the refcount in `prepare_fb` and don't decrease it in `cleanup_fb`. The
opposite can also be true.
In fact, the struct drm_plane .state shouldn't be accessed directly
but instead, the `drm_atomic_get_new_plane_state()` helper function should
be used. So, we could stick to this check, but using
`drm_atomic_get_new_plane_state()`. But actually, this check is not re
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
arm_smmu_rpm_get() invokes pm_runtime_get_sync(), which increases the
refcount of the "smmu" even though the return value is less than 0.
The reference counting issue happens in some error handling paths of
arm_smmu_rpm_get() in its caller functions. When arm_smmu_rpm_get()
fails, the caller functions forget to decrease the refcount of "smmu"
increased by arm_smmu_rpm_get(), causing a refcount leak.
Fix this issue by calling pm_runtime_resume_and_get() instead of
pm_runtime_get_sync() in arm_smmu_rpm_get(), which can keep the refcount
balanced in case of failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: prime: fix refcount underflow
Calling nouveau_bo_ref() on a nouveau_bo without initializing it (and
hence the backing ttm_bo) leads to a refcount underflow.
Instead of calling nouveau_bo_ref() in the unwind path of
drm_gem_object_init(), clean things up manually.
(cherry picked from commit 1b93f3e89d03cfc576636e195466a0d728ad8de5) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: don't unpoison huge_zero_folio
When I did memory failure tests recently, below panic occurs:
kernel BUG at include/linux/mm.h:1135!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
Call Trace:
<TASK>
do_shrink_slab+0x14f/0x6a0
shrink_slab+0xca/0x8c0
shrink_node+0x2d0/0x7d0
balance_pgdat+0x33a/0x720
kswapd+0x1f3/0x410
kthread+0xd5/0x100
ret_from_fork+0x2f/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
The root cause is that HWPoison flag will be set for huge_zero_folio
without increasing the folio refcnt. But then unpoison_memory() will
decrease the folio refcnt unexpectedly as it appears like a successfully
hwpoisoned folio leading to VM_BUG_ON_PAGE(page_ref_count(page) == 0) when
releasing huge_zero_folio.
Skip unpoisoning huge_zero_folio in unpoison_memory() to fix this issue.
We're not prepared to unpoison huge_zero_folio yet. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: defer exposing anon_fd until after copy_to_user() succeeds
After installing the anonymous fd, we can now see it in userland and close
it. However, at this point we may not have gotten the reference count of
the cache, but we will put it during colse fd, so this may cause a cache
UAF.
So grab the cache reference count before fd_install(). In addition, by
kernel convention, fd is taken over by the user land after fd_install(),
and the kernel should not call close_fd() after that, i.e., it should call
fd_install() after everything is ready, thus fd_install() is called after
copy_to_user() succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq/amd-pstate: Fix cpufreq_policy ref counting
amd_pstate_update_limits() takes a cpufreq_policy reference but doesn't
decrement the refcount in one of the exit paths, fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix wait_fence submitqueue leak
We weren't dropping the submitqueue reference in all paths. In
particular, when the fence has already been signalled. Split out
a helper to simplify handling this in the various different return
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/devfreq: Fix OPP refcnt leak |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: gpmi: don't leak PM reference in error path
If gpmi_nfc_apply_timings() fails, the PM runtime usage counter must be
dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rk817: Fix node refcount leak
Dan Carpenter reports that the Smatch static checker warning has found
that there is another refcount leak in the probe function. While
of_node_put() was added in one of the return paths, it should in
fact be added for ALL return paths that return an error and at driver
removal time. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix netns refcount leak in devlink_nl_cmd_reload()
While preparing my patch series adding netns refcount tracking,
I spotted bugs in devlink_nl_cmd_reload()
Some error paths forgot to release a refcount on a netns.
To fix this, we can reduce the scope of get_net()/put_net()
section around the call to devlink_reload(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: mma8452: Fix trigger reference couting
The mma8452 driver directly assigns a trigger to the struct iio_dev. The
IIO core when done using this trigger will call `iio_trigger_put()` to drop
the reference count by 1.
Without the matching `iio_trigger_get()` in the driver the reference count
can reach 0 too early, the trigger gets freed while still in use and a
use-after-free occurs.
Fix this by getting a reference to the trigger before assigning it to the
IIO device. |
| Use After Free vulnerability in Linux Kernel allows Privilege Escalation. An improper Update of Reference Count in io_uring leads to Use-After-Free and Local Privilege Escalation.
When io_msg_ring was invoked with a fixed file, it called io_fput_file() which improperly decreased its reference count (leading to Use-After-Free and Local Privilege Escalation). Fixed files are permanently registered to the ring, and should not be put separately.
We recommend upgrading past commit https://github.com/torvalds/linux/commit/fc7222c3a9f56271fba02aabbfbae999042f1679 https://github.com/torvalds/linux/commit/fc7222c3a9f56271fba02aabbfbae999042f1679
|
| An Improper Handling of Unexpected Data Type vulnerability in the handling of SIP calls in Juniper Networks Junos OS on SRX Series and MX Series platforms allows an attacker to cause a memory leak leading to Denial of Services (DoS). This issue occurs on all MX Series platforms with MS-MPC or MS-MIC card and all SRX Series platforms where SIP ALG is enabled. Successful exploitation of this vulnerability prevents additional SIP calls and applications from succeeding. The SIP ALG needs to be enabled, either implicitly / by default or by way of configuration. To confirm whether SIP ALG is enabled on SRX use the following command: user@host> show security alg status | match sip SIP : Enabled This issue affects Juniper Networks Junos OS on SRX Series and on MX Series: All versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R2-S8, 19.4R3-S10; 20.1 versions 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2-S2, 21.4R3; 22.1 versions prior to 22.1R1-S2, 22.1R2, 22.1R3-S1. This issue does not affect Juniper Networks Junos OS on SRX Series and on MX Series: All versions prior to 18.2R1. |
| A flaw was found in the Linux kernel's netdevsim device driver, within the scheduling of events. This issue results from the improper management of a reference count. This may allow an attacker to create a denial of service condition on the system. |
| This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Unified Automation OPC UA C++ Demo Server 1.7.6-537. Authentication is not required to exploit this vulnerability. The specific flaw exists within the OpcUa_SecureListener_ProcessSessionCallRequest method. A crafted OPC UA message can force the server to incorrectly update a reference count. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-16927. |
| An Improper Update of Reference Count vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to trigger a counter overflow, eventually causing a Denial of Service (DoS). This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S1-EVO; 21.1 versions prior to 21.1R3-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO. This issue does not affect Juniper Networks Junos OS. |
| An issue was discovered in the Linux Kernel from 4.18 to 4.19, an improper update of sock reference in TCP pacing can lead to memory/netns leak, which can be used by remote clients. |