| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| If exploited, this vulnerability could cause a SuiteLink server to consume excessive system resources and slow down processing of Data I/O for the duration of the attack. |
| In AMD Versal Adaptive SoC devices, the incorrect configuration of the SSS during runtime (post-boot) cryptographic operations could cause data to be incorrectly written to and read from invalid locations as well as returning incorrect cryptographic data. |
| A vulnerability has been found in TRENDnet TEW-831DR 1.0 (601.130.1.1410). Impacted is an unknown function of the file /boafrm/formSysCmd. The manipulation of the argument sysHost leads to command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| iStats contains an insecure XPC service that allows local, unprivileged users to escalate their privileges to root via command injection.This issue affects iStats: 7.10.4. |
| A vulnerability was found in Raisecom Multi-Service Intelligent Gateway up to 20250208. It has been declared as critical. This vulnerability affects unknown code of the file /vpn/vpn_template_style.php of the component Request Parameter Handler. The manipulation of the argument stylenum leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The poplib module, when passed a user-controlled command, can have
additional commands injected using newlines. Mitigation rejects commands
containing control characters. |
| A critical remote code execution (RCE) vulnerability exists in the web-based management interface of GatesAir Maxiva UAXT, VAXT transmitters when debugging mode is enabled. An attacker with a valid session ID (sess_id) can send specially crafted POST requests to the /json endpoint, enabling arbitrary command execution on the underlying system. This vulnerability can lead to full system compromise, including unauthorized access, privilege escalation, and potentially full device takeover. |
| Authenticated command injection vulnerability in the command line interface of a network management service. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| The Platform component of Mitel OpenScape 4000 and OpenScape 4000 Manager V11 R0.22.0 through V11 R0.22.1, V10 R1.54.0 through V10 R1.54.1, and V10 R1.42.6 and earlier could allow an unauthenticated attacker to conduct a command injection attack due to insufficient parameter sanitization. A successful exploit could allow an attacker to execute arbitrary commands within the same privilege level as the web access process. |
| An Improper Neutralization of Escape Sequences vulnerability could allow an Authentication Bypass with a Remote Code Execution (RCE) by a malicious actor with access to UniFi Protect Cameras adjacent network. |
| Multiple Improper Input Validation vulnerabilities in UniFi Connect EV Station Lite may allow a Command Injection by a malicious actor with network access to the UniFi Connect EV Station Lite.
Affected Products:
UniFi Connect EV Station Lite (Version 1.5.1 and earlier)
Mitigation:
Update UniFi Connect EV Station Lite to Version 1.5.2 or later |
| # Active Storage allowed transformation methods potentially unsafe
Active Storage attempts to prevent the use of potentially unsafe image
transformation methods and parameters by default.
The default allowed list contains three methods allow for the circumvention
of the safe defaults which enables potential command injection
vulnerabilities in cases where arbitrary user supplied input is accepted as
valid transformation methods or parameters.
Impact
------
This vulnerability impacts applications that use Active Storage with the image_processing processing gem in addition to mini_magick as the image processor.
Vulnerable code will look something similar to this:
```
<%= image_tag blob.variant(params[:t] => params[:v]) %>
```
Where the transformation method or its arguments are untrusted arbitrary input.
All users running an affected release should either upgrade or use one of the workarounds immediately.
Workarounds
-----------
Consuming user supplied input for image transformation methods or their parameters is unsupported behavior and should be considered dangerous.
Strict validation of user supplied methods and parameters should be performed
as well as having a strong [ImageMagick security
policy](https://imagemagick.org/script/security-policy.php) deployed.
Credits
-------
Thank you [lio346](https://hackerone.com/lio346) for reporting this! |
| Allocation of resources without limits or throttling issue exists in HMI ViewJet C-more series and HMI GC-A2 series, which may allow a remote unauthenticated attacker to cause a denial-of-service (DoS) condition. |
| Nokia Single RAN baseband software earlier than 24R1-SR 1.0 MP contains administrative shell input validation fault, which authenticated admin user can, in theory, potentially use for injecting arbitrary commands for unprivileged baseband OAM service process execution via special characters added to baseband internal COMA_config.xml file.
This issue has been corrected starting from release 24R1-SR 1.0 MP and later, by adding proper input validation to OAM service process which prevents injecting special characters via baseband internal COMA_config.xml file. |
| A vulnerability in the web application of ctrlX OS allows a remote authenticated (low-privileged) attacker to induce a Denial-of-Service (DoS) condition on the device via multiple crafted HTTP requests. In the worst case, a full power cycle is needed to regain control of the device. |
| A command injection vulnerability exists in the Infinxt iEdge 100 2.1.32 in the Troubleshoot module "MTR" functionality. The vulnerability is due to improper validation of user-supplied input in the mtrIp parameter. An attacker can exploit this flaw to execute arbitrary operating system commands on the underlying system with the same privileges as the web application process. |
| An issue in the component /internals/functions of R-fx Networks Linux Malware Detect v1.6.5 allows attackers to escalate privileges and execute arbitrary code via supplying a file that contains a crafted filename. |
| Johnson Controls Metasys component listed below have Improper Neutralization of Special Elements used in a Command (Command Injection) Vulnerability . Successful exploitation of this vulnerability could allow remote SQL execution This issue affects
* Metasys: Application and Data Server (ADS) installed with SQL Express deployed as part of the Metasys 14.1 and prior installation,
* Extended Application and Data Server (ADX) installed with SQL Express deployed as part of the Metasys 14.1 installation,
* LCS8500 or NAE8500 installed with SQL Express deployed as part of the Metasys installation Releases 12.0 through 14.1,
* System Configuration Tool (SCT) installed with SQL Express deployed as part of the SCT installation 17.1 and prior,
* Controller Configuration Tool (CCT) installed with SQL Express deployed as part of the CCT installation 17.0 and prior. |
| An unauthenticated remote attacker can cause a Denial of Service by sending a large number of requests to the http service on port 80. |
| Expr is an expression language and expression evaluation for Go. Prior to version 1.17.0, if the Expr expression parser is given an unbounded input string, it will attempt to compile the entire string and generate an Abstract Syntax Tree (AST) node for each part of the expression. In scenarios where input size isn’t limited, a malicious or inadvertent extremely large expression can consume excessive memory as the parser builds a huge AST. This can ultimately lead to*excessive memory usage and an Out-Of-Memory (OOM) crash of the process. This issue is relatively uncommon and will only manifest when there are no restrictions on the input size, i.e. the expression length is allowed to grow arbitrarily large. In typical use cases where inputs are bounded or validated, this problem would not occur. The problem has been patched in the latest versions of the Expr library. The fix introduces compile-time limits on the number of AST nodes and memory usage during parsing, preventing any single expression from exhausting resources. Users should upgrade to Expr version 1.17.0 or later, as this release includes the new node budget and memory limit safeguards. Upgrading to v1.17.0 ensures that extremely deep or large expressions are detected and safely aborted during compilation, avoiding the OOM condition. For users who cannot immediately upgrade, the recommended workaround is to impose an input size restriction before parsing. In practice, this means validating or limiting the length of expression strings that your application will accept. For example, set a maximum allowable number of characters (or nodes) for any expression and reject or truncate inputs that exceed this limit. By ensuring no unbounded-length expression is ever fed into the parser, one can prevent the parser from constructing a pathologically large AST and avoid potential memory exhaustion. In short, pre-validate and cap input size as a safeguard in the absence of the patch. |
