| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: connac: do not check WED status for non-mmio devices
WED is supported just for mmio devices, so do not check it for usb or
sdio devices. This patch fixes the crash reported below:
[ 21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d
[ 22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3)
[ 22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d
[ 22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3)
[ 22.565885] wlp0s3u1i3: authenticated
[ 22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3)
[ 22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3)
[ 22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms)
[ 23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3)
[ 23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3)
[ 23.797450] wlp0s3u1i3: associated
[ 24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[ 24.959640] BUG: unable to handle page fault for address: ffff88800c223200
[ 24.959706] #PF: supervisor instruction fetch in kernel mode
[ 24.959788] #PF: error_code(0x0011) - permissions violation
[ 24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163
[ 24.959957] Oops: 0011 [#1] PREEMPT SMP
[ 24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18
[ 24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014
[ 24.960191] RIP: 0010:0xffff88800c223200
[ 24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282
[ 24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058
[ 24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010
[ 24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c
[ 24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001
[ 24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644
[ 24.960950] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[ 24.961036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0
[ 24.961190] Call Trace:
[ 24.961219] <TASK>
[ 24.961245] ? mt76_connac_mcu_add_key+0x2cf/0x310
[ 24.961313] ? mt7921_set_key+0x150/0x200
[ 24.961365] ? drv_set_key+0xa9/0x1b0
[ 24.961418] ? ieee80211_key_enable_hw_accel+0xd9/0x240
[ 24.961485] ? ieee80211_key_replace+0x3f3/0x730
[ 24.961541] ? crypto_shash_setkey+0x89/0xd0
[ 24.961597] ? ieee80211_key_link+0x2d7/0x3a0
[ 24.961664] ? crypto_aead_setauthsize+0x31/0x50
[ 24.961730] ? sta_info_hash_lookup+0xa6/0xf0
[ 24.961785] ? ieee80211_add_key+0x1fc/0x250
[ 24.961842] ? rdev_add_key+0x41/0x140
[ 24.961882] ? nl80211_parse_key+0x6c/0x2f0
[ 24.961940] ? nl80211_new_key+0x24a/0x290
[ 24.961984] ? genl_rcv_msg+0x36c/0x3a0
[ 24.962036] ? rdev_mod_link_station+0xe0/0xe0
[ 24.962102] ? nl80211_set_key+0x410/0x410
[ 24.962143] ? nl80211_pre_doit+0x200/0x200
[ 24.962187] ? genl_bind+0xc0/0xc0
[ 24.962217] ? netlink_rcv_skb+0xaa/0xd0
[ 24.962259] ? genl_rcv+0x24/0x40
[ 24.962300] ? netlink_unicast+0x224/0x2f0
[ 24.962345] ? netlink_sendmsg+0x30b/0x3d0
[ 24.962388] ? ____sys_sendmsg+0x109/0x1b0
[ 24.962388] ? ____sys_sendmsg+0x109/0x1b0
[ 24.962440] ? __import_iovec+0x2e/0x110
[ 24.962482] ? ___sys_sendmsg+0xbe/0xe0
[ 24.962525] ? mod_objcg_state+0x25c/0x330
[ 24.962576] ? __dentry_kill+0x19e/0x1d0
[ 24.962618] ? call_rcu+0x18f/0x270
[ 24.962660] ? __dentry_kill+0x19e/0x1d0
[ 24.962702] ? __x64_sys_sendmsg+0x70/0x90
[ 24.962744] ? do_syscall_64+0x3d/0x80
[ 24.962796] ? exit_to_user_mode_prepare+0x1b/0x70
[ 24.962852] ? entry_SYSCA
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/shmem-helper: Remove another errant put in error path
drm_gem_shmem_mmap() doesn't own reference in error code path, resulting
in the dma-buf shmem GEM object getting prematurely freed leading to a
later use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Add missing overflow check in xdp_umem_reg
The number of chunks can overflow u32. Make sure to return -EINVAL on
overflow. Also remove a redundant u32 cast assigning umem->npgs. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: use the workqueue to destroy unaccepted sockets
Christoph reported a UaF at token lookup time after having
refactored the passive socket initialization part:
BUG: KASAN: use-after-free in __token_bucket_busy+0x253/0x260
Read of size 4 at addr ffff88810698d5b0 by task syz-executor653/3198
CPU: 1 PID: 3198 Comm: syz-executor653 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0x91
print_report+0x16a/0x46f
kasan_report+0xad/0x130
__token_bucket_busy+0x253/0x260
mptcp_token_new_connect+0x13d/0x490
mptcp_connect+0x4ed/0x860
__inet_stream_connect+0x80e/0xd90
tcp_sendmsg_fastopen+0x3ce/0x710
mptcp_sendmsg+0xff1/0x1a20
inet_sendmsg+0x11d/0x140
__sys_sendto+0x405/0x490
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
We need to properly clean-up all the paired MPTCP-level
resources and be sure to release the msk last, even when
the unaccepted subflow is destroyed by the TCP internals
via inet_child_forget().
We can re-use the existing MPTCP_WORK_CLOSE_SUBFLOW infra,
explicitly checking that for the critical scenario: the
closed subflow is the MPC one, the msk is not accepted and
eventually going through full cleanup.
With such change, __mptcp_destroy_sock() is always called
on msk sockets, even on accepted ones. We don't need anymore
to transiently drop one sk reference at msk clone time.
Please note this commit depends on the parent one:
mptcp: refactor passive socket initialization |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
syzkaller reportes a KASAN issue with stack-out-of-bounds.
The call trace is as follows:
dump_stack+0x9c/0xd3
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
__perf_event_header__init_id+0x34/0x290
perf_event_header__init_id+0x48/0x60
perf_output_begin+0x4a4/0x560
perf_event_bpf_output+0x161/0x1e0
perf_iterate_sb_cpu+0x29e/0x340
perf_iterate_sb+0x4c/0xc0
perf_event_bpf_event+0x194/0x2c0
__bpf_prog_put.constprop.0+0x55/0xf0
__cls_bpf_delete_prog+0xea/0x120 [cls_bpf]
cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf]
process_one_work+0x3c2/0x730
worker_thread+0x93/0x650
kthread+0x1b8/0x210
ret_from_fork+0x1f/0x30
commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()")
use on-stack struct perf_sample_data of the caller function.
However, perf_event_bpf_output uses incorrect parameter to convert
small-sized data (struct perf_bpf_event) into large-sized data
(struct perf_sample_data), which causes memory overwriting occurs in
__perf_event_header__init_id. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
When a reset notify IPC message is received, the ISR schedules a work
function and passes the ISHTP device to it via a global pointer
ishtp_dev. If ish_probe() fails, the devm-managed device resources
including ishtp_dev are freed, but the work is not cancelled, causing a
use-after-free when the work function tries to access ishtp_dev. Use
devm_work_autocancel() instead, so that the work is automatically
cancelled if probe fails. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add sync after creating vram bo
There will be data corruption on vram allocated by svm
if the initialization is not complete and application is
writting on the memory. Adding sync to wait for the
initialization completion is to resolve this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix oops due to uncleared server->smbd_conn in reconnect
In smbd_destroy(), clear the server->smbd_conn pointer after freeing the
smbd_connection struct that it points to so that reconnection doesn't get
confused. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-mtrace: prevent underflow in sof_ipc4_priority_mask_dfs_write()
The "id" comes from the user. Change the type to unsigned to prevent
an array underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix request ref counting during error capture & debugfs dump
When GuC support was added to error capture, the reference counting
around the request object was broken. Fix it up.
The context based search manages the spinlocking around the search
internally. So it needs to grab the reference count internally as
well. The execlist only request based search relies on external
locking, so it needs an external reference count but within the
spinlock not outside it.
The only other caller of the context based search is the code for
dumping engine state to debugfs. That code wasn't previously getting
an explicit reference at all as it does everything while holding the
execlist specific spinlock. So, that needs updaing as well as that
spinlock doesn't help when using GuC submission. Rather than trying to
conditionally get/put depending on submission model, just change it to
always do the get/put.
v2: Explicitly document adding an extra blank line in some dense code
(Andy Shevchenko). Fix multiple potential null pointer derefs in case
of no request found (some spotted by Tvrtko, but there was more!).
Also fix a leaked request in case of !started and another in
__guc_reset_context now that intel_context_find_active_request is
actually reference counting the returned request.
v3: Add a _get suffix to intel_context_find_active_request now that it
grabs a reference (Daniele).
v4: Split the intel_guc_find_hung_context change to a separate patch
and rename intel_context_find_active_request_get to
intel_context_get_active_request (Tvrtko).
v5: s/locking/reference counting/ in commit message (Tvrtko)
(cherry picked from commit 3700e353781e27f1bc7222f51f2cc36cbeb9b4ec) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: support non-r10 register spill/fill to/from stack in precision tracking
Use instruction (jump) history to record instructions that performed
register spill/fill to/from stack, regardless if this was done through
read-only r10 register, or any other register after copying r10 into it
*and* potentially adjusting offset.
To make this work reliably, we push extra per-instruction flags into
instruction history, encoding stack slot index (spi) and stack frame
number in extra 10 bit flags we take away from prev_idx in instruction
history. We don't touch idx field for maximum performance, as it's
checked most frequently during backtracking.
This change removes basically the last remaining practical limitation of
precision backtracking logic in BPF verifier. It fixes known
deficiencies, but also opens up new opportunities to reduce number of
verified states, explored in the subsequent patches.
There are only three differences in selftests' BPF object files
according to veristat, all in the positive direction (less states).
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
-------------------------------------- ------------- --------- --------- ------------- ---------- ---------- -------------
test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%)
Note, I avoided renaming jmp_history to more generic insn_hist to
minimize number of lines changed and potential merge conflicts between
bpf and bpf-next trees.
Notice also cur_hist_entry pointer reset to NULL at the beginning of
instruction verification loop. This pointer avoids the problem of
relying on last jump history entry's insn_idx to determine whether we
already have entry for current instruction or not. It can happen that we
added jump history entry because current instruction is_jmp_point(), but
also we need to add instruction flags for stack access. In this case, we
don't want to entries, so we need to reuse last added entry, if it is
present.
Relying on insn_idx comparison has the same ambiguity problem as the one
that was fixed recently in [0], so we avoid that.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
There is a null-ptr-deref when mount.cifs over rdma:
BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
Read of size 8 at addr 0000000000000018 by task mount.cifs/3046
CPU: 2 PID: 3046 Comm: mount.cifs Not tainted 6.1.0-rc5+ #62
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc3
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
kasan_report+0xad/0x130
rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
execute_in_process_context+0x25/0x90
__rxe_cleanup+0x101/0x1d0 [rdma_rxe]
rxe_create_qp+0x16a/0x180 [rdma_rxe]
create_qp.part.0+0x27d/0x340
ib_create_qp_kernel+0x73/0x160
rdma_create_qp+0x100/0x230
_smbd_get_connection+0x752/0x20f0
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The root cause of the issue is the socket create failed in
rxe_qp_init_req().
So move the reset rxe_qp_do_cleanup() after the NULL ptr check. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()
When peer delete failed in a disconnect operation, use-after-free
detected by KFENCE in below log. It is because for each vdev_id and
address, it has only one struct ath10k_peer, it is allocated in
ath10k_peer_map_event(). When connected to an AP, it has more than
one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the
array peer_map of struct ath10k will be set muti-elements to the
same ath10k_peer in ath10k_peer_map_event(). When peer delete failed
in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer
id in array peer_map of struct ath10k, and then use-after-free happened
for the 2nd peer id because they map to the same ath10k_peer.
And clean up all peers in array peer_map for the ath10k_peer, then
user-after-free disappeared
peer map event log:
[ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e
[ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33
[ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166
peer unmap event log:
[ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING)
[ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone)
[ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166
use-after-free log:
[21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING)
[21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110
[21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed
[21713.799968] ==================================================================
[21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.799991]
[21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69):
[21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.800041] drv_sta_state+0x115/0x677 [mac80211]
[21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800076] __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800161] genl_rcv_msg+0x38e/0x3be
[21713.800166] netlink_rcv_skb+0x89/0xf7
[21713.800171] genl_rcv+0x28/0x36
[21713.800176] netlink_unicast+0x179/0x24b
[21713.800181] netlink_sendmsg+0x3a0/0x40e
[21713.800187] sock_sendmsg+0x72/0x76
[21713.800192] ____sys_sendmsg+0x16d/0x1e3
[21713.800196] ___sys_sendmsg+0x95/0xd1
[21713.800200] __sys_sendmsg+0x85/0xbf
[21713.800205] do_syscall_64+0x43/0x55
[21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[21713.800213]
[21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k
[21713.800219]
[21713.800224] allocated by task 13 on cpu 0 at 21705.501373s:
[21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core]
[21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core]
[21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core]
[21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core]
[21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: Fix qmi_msg_handler data structure initialization
qmi_msg_handler is required to be null terminated by QMI module.
There might be a case where a handler for a msg id is not present in the
handlers array which can lead to infinite loop while searching the handler
and therefore out of bound access in qmi_invoke_handler().
Hence update the initialization in qmi_msg_handler data structure.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/restrack: Release MR restrack when delete
The MR restrack also needs to be released when delete it, otherwise it
cause memory leak as the task struct won't be released. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
When the ops_init() interface is invoked to initialize the net, but
ops->init() fails, data is released. However, the ptr pointer in
net->gen is invalid. In this case, when nfqnl_nf_hook_drop() is invoked
to release the net, invalid address access occurs.
The process is as follows:
setup_net()
ops_init()
data = kzalloc(...) ---> alloc "data"
net_assign_generic() ---> assign "date" to ptr in net->gen
...
ops->init() ---> failed
...
kfree(data); ---> ptr in net->gen is invalid
...
ops_exit_list()
...
nfqnl_nf_hook_drop()
*q = nfnl_queue_pernet(net) ---> q is invalid
The following is the Call Trace information:
BUG: KASAN: use-after-free in nfqnl_nf_hook_drop+0x264/0x280
Read of size 8 at addr ffff88810396b240 by task ip/15855
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
print_report+0x155/0x454
kasan_report+0xba/0x1f0
nfqnl_nf_hook_drop+0x264/0x280
nf_queue_nf_hook_drop+0x8b/0x1b0
__nf_unregister_net_hook+0x1ae/0x5a0
nf_unregister_net_hooks+0xde/0x130
ops_exit_list+0xb0/0x170
setup_net+0x7ac/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
Allocated by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0xa1/0xb0
__kmalloc+0x49/0xb0
ops_init+0xe7/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x155/0x1b0
slab_free_freelist_hook+0x11b/0x220
__kmem_cache_free+0xa4/0x360
ops_init+0xb9/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix mempool alloc size
Convert the max size to bytes to match the units of the divisor that
calculates the worst-case number of PRP entries.
The result is used to determine how many PRP Lists are required. The
code was previously rounding this to 1 list, but we can require 2 in the
worst case. In that scenario, the driver would corrupt memory beyond the
size provided by the mempool.
While unlikely to occur (you'd need a 4MB in exactly 127 phys segments
on a queue that doesn't support SGLs), this memory corruption has been
observed by kfence. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Avoid double brelse() in udf_rename()
syzbot reported a warning like below [1]:
VFS: brelse: Trying to free free buffer
WARNING: CPU: 2 PID: 7301 at fs/buffer.c:1145 __brelse+0x67/0xa0
...
Call Trace:
<TASK>
invalidate_bh_lru+0x99/0x150
smp_call_function_many_cond+0xe2a/0x10c0
? generic_remap_file_range_prep+0x50/0x50
? __brelse+0xa0/0xa0
? __mutex_lock+0x21c/0x12d0
? smp_call_on_cpu+0x250/0x250
? rcu_read_lock_sched_held+0xb/0x60
? lock_release+0x587/0x810
? __brelse+0xa0/0xa0
? generic_remap_file_range_prep+0x50/0x50
on_each_cpu_cond_mask+0x3c/0x80
blkdev_flush_mapping+0x13a/0x2f0
blkdev_put_whole+0xd3/0xf0
blkdev_put+0x222/0x760
deactivate_locked_super+0x96/0x160
deactivate_super+0xda/0x100
cleanup_mnt+0x222/0x3d0
task_work_run+0x149/0x240
? task_work_cancel+0x30/0x30
do_exit+0xb29/0x2a40
? reacquire_held_locks+0x4a0/0x4a0
? do_raw_spin_lock+0x12a/0x2b0
? mm_update_next_owner+0x7c0/0x7c0
? rwlock_bug.part.0+0x90/0x90
? zap_other_threads+0x234/0x2d0
do_group_exit+0xd0/0x2a0
__x64_sys_exit_group+0x3a/0x50
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The cause of the issue is that brelse() is called on both ofibh.sbh
and ofibh.ebh by udf_find_entry() when it returns NULL. However,
brelse() is called by udf_rename(), too. So, b_count on buffer_head
becomes unbalanced.
This patch fixes the issue by not calling brelse() by udf_rename()
when udf_find_entry() returns NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure
In case mipi_dsi_attach() fails, call drm_panel_remove() to
avoid memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: validate the extent length for uncompressed pclusters
syzkaller reported a KASAN use-after-free:
https://syzkaller.appspot.com/bug?extid=2ae90e873e97f1faf6f2
The referenced fuzzed image actually has two issues:
- m_pa == 0 as a non-inlined pcluster;
- The logical length is longer than its physical length.
The first issue has already been addressed. This patch addresses
the second issue by checking the extent length validity. |
