Export limit exceeded: 423974 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (423974 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-53140 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netlink: terminate outstanding dump on socket close Netlink supports iterative dumping of data. It provides the families the following ops: - start - (optional) kicks off the dumping process - dump - actual dump helper, keeps getting called until it returns 0 - done - (optional) pairs with .start, can be used for cleanup The whole process is asynchronous and the repeated calls to .dump don't actually happen in a tight loop, but rather are triggered in response to recvmsg() on the socket. This gives the user full control over the dump, but also means that the user can close the socket without getting to the end of the dump. To make sure .start is always paired with .done we check if there is an ongoing dump before freeing the socket, and if so call .done. The complication is that sockets can get freed from BH and .done is allowed to sleep. So we use a workqueue to defer the call, when needed. Unfortunately this does not work correctly. What we defer is not the cleanup but rather releasing a reference on the socket. We have no guarantee that we own the last reference, if someone else holds the socket they may release it in BH and we're back to square one. The whole dance, however, appears to be unnecessary. Only the user can interact with dumps, so we can clean up when socket is closed. And close always happens in process context. Some async code may still access the socket after close, queue notification skbs to it etc. but no dumps can start, end or otherwise make progress. Delete the workqueue and flush the dump state directly from the release handler. Note that further cleanup is possible in -next, for instance we now always call .done before releasing the main module reference, so dump doesn't have to take a reference of its own. | ||||
| CVE-2024-53138 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: kTLS, Fix incorrect page refcounting The kTLS tx handling code is using a mix of get_page() and page_ref_inc() APIs to increment the page reference. But on the release path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used. This is an issue when using pages from large folios: the get_page() references are stored on the folio page while the page_ref_inc() references are stored directly in the given page. On release the folio page will be dereferenced too many times. This was found while doing kTLS testing with sendfile() + ZC when the served file was read from NFS on a kernel with NFS large folios support (commit 49b29a573da8 ("nfs: add support for large folios")). | ||||
| CVE-2024-53135 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are myriad bugs in the implementation, some of which are fatal to the guest, and others which put the stability and health of the host at risk. For guest fatalities, the most glaring issue is that KVM fails to ensure tracing is disabled, and *stays* disabled prior to VM-Enter, which is necessary as hardware disallows loading (the guest's) RTIT_CTL if tracing is enabled (enforced via a VMX consistency check). Per the SDM: If the logical processor is operating with Intel PT enabled (if IA32_RTIT_CTL.TraceEn = 1) at the time of VM entry, the "load IA32_RTIT_CTL" VM-entry control must be 0. On the host side, KVM doesn't validate the guest CPUID configuration provided by userspace, and even worse, uses the guest configuration to decide what MSRs to save/load at VM-Enter and VM-Exit. E.g. configuring guest CPUID to enumerate more address ranges than are supported in hardware will result in KVM trying to passthrough, save, and load non-existent MSRs, which generates a variety of WARNs, ToPA ERRORs in the host, a potential deadlock, etc. | ||||
| CVE-2024-53125 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: sync_linked_regs() must preserve subreg_def Range propagation must not affect subreg_def marks, otherwise the following example is rewritten by verifier incorrectly when BPF_F_TEST_RND_HI32 flag is set: 0: call bpf_ktime_get_ns call bpf_ktime_get_ns 1: r0 &= 0x7fffffff after verifier r0 &= 0x7fffffff 2: w1 = w0 rewrites w1 = w0 3: if w0 < 10 goto +0 --------------> r11 = 0x2f5674a6 (r) 4: r1 >>= 32 r11 <<= 32 (r) 5: r0 = r1 r1 |= r11 (r) 6: exit; if w0 < 0xa goto pc+0 r1 >>= 32 r0 = r1 exit (or zero extension of w1 at (2) is missing for architectures that require zero extension for upper register half). The following happens w/o this patch: - r0 is marked as not a subreg at (0); - w1 is marked as subreg at (2); - w1 subreg_def is overridden at (3) by copy_register_state(); - w1 is read at (5) but mark_insn_zext() does not mark (2) for zero extension, because w1 subreg_def is not set; - because of BPF_F_TEST_RND_HI32 flag verifier inserts random value for hi32 bits of (2) (marked (r)); - this random value is read at (5). | ||||
| CVE-2024-53122 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: cope racing subflow creation in mptcp_rcv_space_adjust Additional active subflows - i.e. created by the in kernel path manager - are included into the subflow list before starting the 3whs. A racing recvmsg() spooling data received on an already established subflow would unconditionally call tcp_cleanup_rbuf() on all the current subflows, potentially hitting a divide by zero error on the newly created ones. Explicitly check that the subflow is in a suitable state before invoking tcp_cleanup_rbuf(). | ||||
| CVE-2024-50275 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-10-15 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64/sve: Discard stale CPU state when handling SVE traps The logic for handling SVE traps manipulates saved FPSIMD/SVE state incorrectly, and a race with preemption can result in a task having TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state is stale (e.g. with SVE traps enabled). This has been observed to result in warnings from do_sve_acc() where SVE traps are not expected while TIF_SVE is set: | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ Warnings of this form have been reported intermittently, e.g. https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/ https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/ The race can occur when the SVE trap handler is preempted before and after manipulating the saved FPSIMD/SVE state, starting and ending on the same CPU, e.g. | void do_sve_acc(unsigned long esr, struct pt_regs *regs) | { | // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled | // task->fpsimd_cpu is 0. | // per_cpu_ptr(&fpsimd_last_state, 0) is task. | | ... | | // Preempted; migrated from CPU 0 to CPU 1. | // TIF_FOREIGN_FPSTATE is set. | | get_cpu_fpsimd_context(); | | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ | | sve_init_regs() { | if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { | ... | } else { | fpsimd_to_sve(current); | current->thread.fp_type = FP_STATE_SVE; | } | } | | put_cpu_fpsimd_context(); | | // Preempted; migrated from CPU 1 to CPU 0. | // task->fpsimd_cpu is still 0 | // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then: | // - Stale HW state is reused (with SVE traps enabled) | // - TIF_FOREIGN_FPSTATE is cleared | // - A return to userspace skips HW state restore | } Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set by calling fpsimd_flush_task_state() to detach from the saved CPU state. This ensures that a subsequent context switch will not reuse the stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the new state to be reloaded from memory prior to a return to userspace. | ||||
| CVE-2024-50082 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race We're seeing crashes from rq_qos_wake_function that look like this: BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ... So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock). p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash. What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this: rq_qos_wait() rq_qos_wake_function() ============================================================== prepare_to_wait_exclusive() data->got_token = true; list_del_init(&curr->entry); if (data.got_token) break; finish_wait(&rqw->wait, &data.wq); ^- returns immediately because list_empty_careful(&wq_entry->entry) is true ... return, go do something else ... wake_up_process(data->task) (NO LONGER VALID!)-^ Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue. The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order. Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait(). | ||||
| CVE-2024-49568 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: check v2_ext_offset/eid_cnt/ism_gid_cnt when receiving proposal msg When receiving proposal msg in server, the fields v2_ext_offset/ eid_cnt/ism_gid_cnt in proposal msg are from the remote client and can not be fully trusted. Especially the field v2_ext_offset, once exceed the max value, there has the chance to access wrong address, and crash may happen. This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt before using them. | ||||
| CVE-2023-7324 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses Sanitize possible addl_desc_ptr out-of-bounds accesses in ses_enclosure_data_process(). | ||||
| CVE-2023-54318 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add While doing smcr_port_add, there maybe linkgroup add into or delete from smc_lgr_list.list at the same time, which may result kernel crash. So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add. The crash calltrace show below: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 559726 Comm: kworker/0:92 Kdump: loaded Tainted: G Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 449e491 04/01/2014 Workqueue: events smc_ib_port_event_work [smc] RIP: 0010:smcr_port_add+0xa6/0xf0 [smc] RSP: 0000:ffffa5a2c8f67de0 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffff9935e0650000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff9935e0654290 RDI: ffff9935c8560000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9934c0401918 R10: 0000000000000000 R11: ffffffffb4a5c278 R12: ffff99364029aae4 R13: ffff99364029aa00 R14: 00000000ffffffed R15: ffff99364029ab08 FS: 0000000000000000(0000) GS:ffff994380600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000f06a10003 CR4: 0000000002770ef0 PKRU: 55555554 Call Trace: smc_ib_port_event_work+0x18f/0x380 [smc] process_one_work+0x19b/0x340 worker_thread+0x30/0x370 ? process_one_work+0x340/0x340 kthread+0x114/0x130 ? __kthread_cancel_work+0x50/0x50 ret_from_fork+0x1f/0x30 | ||||
| CVE-2023-54317 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm flakey: don't corrupt the zero page When we need to zero some range on a block device, the function __blkdev_issue_zero_pages submits a write bio with the bio vector pointing to the zero page. If we use dm-flakey with corrupt bio writes option, it will corrupt the content of the zero page which results in crashes of various userspace programs. Glibc assumes that memory returned by mmap is zeroed and it uses it for calloc implementation; if the newly mapped memory is not zeroed, calloc will return non-zeroed memory. Fix this bug by testing if the page is equal to ZERO_PAGE(0) and avoiding the corruption in this case. | ||||
| CVE-2023-54308 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ymfpci: Create card with device-managed snd_devm_card_new() snd_card_ymfpci_remove() was removed in commit c6e6bb5eab74 ("ALSA: ymfpci: Allocate resources with device-managed APIs"), but the call to snd_card_new() was not replaced with snd_devm_card_new(). Since there was no longer a call to snd_card_free, unloading the module would eventually result in Oops: [697561.532887] BUG: unable to handle page fault for address: ffffffffc0924480 [697561.532893] #PF: supervisor read access in kernel mode [697561.532896] #PF: error_code(0x0000) - not-present page [697561.532899] PGD ae1e15067 P4D ae1e15067 PUD ae1e17067 PMD 11a8f5067 PTE 0 [697561.532905] Oops: 0000 [#1] PREEMPT SMP NOPTI [697561.532909] CPU: 21 PID: 5080 Comm: wireplumber Tainted: G W OE 6.2.7 #1 [697561.532914] Hardware name: System manufacturer System Product Name/TUF GAMING X570-PLUS, BIOS 4408 10/28/2022 [697561.532916] RIP: 0010:try_module_get.part.0+0x1a/0xe0 [697561.532924] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 49 89 fc bf 01 00 00 00 e8 56 3c f8 ff <41> 83 3c 24 02 0f 84 96 00 00 00 41 8b 84 24 30 03 00 00 85 c0 0f [697561.532927] RSP: 0018:ffffbe9b858c3bd8 EFLAGS: 00010246 [697561.532930] RAX: ffff9815d14f1900 RBX: ffff9815c14e6000 RCX: 0000000000000000 [697561.532933] RDX: 0000000000000000 RSI: ffffffffc055092c RDI: ffffffffb3778c1a [697561.532935] RBP: ffffbe9b858c3be8 R08: 0000000000000040 R09: ffff981a1a741380 [697561.532937] R10: ffffbe9b858c3c80 R11: 00000009d56533a6 R12: ffffffffc0924480 [697561.532939] R13: ffff9823439d8500 R14: 0000000000000025 R15: ffff9815cd109f80 [697561.532942] FS: 00007f13084f1f80(0000) GS:ffff9824aef40000(0000) knlGS:0000000000000000 [697561.532945] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [697561.532947] CR2: ffffffffc0924480 CR3: 0000000145344000 CR4: 0000000000350ee0 [697561.532949] Call Trace: [697561.532951] <TASK> [697561.532955] try_module_get+0x13/0x30 [697561.532960] snd_ctl_open+0x61/0x1c0 [snd] [697561.532976] snd_open+0xb4/0x1e0 [snd] [697561.532989] chrdev_open+0xc7/0x240 [697561.532995] ? fsnotify_perm.part.0+0x6e/0x160 [697561.533000] ? __pfx_chrdev_open+0x10/0x10 [697561.533005] do_dentry_open+0x169/0x440 [697561.533009] vfs_open+0x2d/0x40 [697561.533012] path_openat+0xa9d/0x10d0 [697561.533017] ? debug_smp_processor_id+0x17/0x20 [697561.533022] ? trigger_load_balance+0x65/0x370 [697561.533026] do_filp_open+0xb2/0x160 [697561.533032] ? _raw_spin_unlock+0x19/0x40 [697561.533036] ? alloc_fd+0xa9/0x190 [697561.533040] do_sys_openat2+0x9f/0x160 [697561.533044] __x64_sys_openat+0x55/0x90 [697561.533048] do_syscall_64+0x3b/0x90 [697561.533052] entry_SYSCALL_64_after_hwframe+0x72/0xdc [697561.533056] RIP: 0033:0x7f1308a40db4 [697561.533059] Code: 24 20 eb 8f 66 90 44 89 54 24 0c e8 46 68 f8 ff 44 8b 54 24 0c 44 89 e2 48 89 ee 41 89 c0 bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 32 44 89 c7 89 44 24 0c e8 78 68 f8 ff 8b 44 [697561.533062] RSP: 002b:00007ffcce664450 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [697561.533066] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1308a40db4 [697561.533068] RDX: 0000000000080000 RSI: 00007ffcce664690 RDI: 00000000ffffff9c [697561.533070] RBP: 00007ffcce664690 R08: 0000000000000000 R09: 0000000000000012 [697561.533072] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000080000 [697561.533074] R13: 00007f13054b069b R14: 0000565209f83200 R15: 0000000000000000 [697561.533078] </TASK> | ||||
| CVE-2023-54306 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: tls: avoid hanging tasks on the tx_lock syzbot sent a hung task report and Eric explains that adversarial receiver may keep RWIN at 0 for a long time, so we are not guaranteed to make forward progress. Thread which took tx_lock and went to sleep may not release tx_lock for hours. Use interruptible sleep where possible and reschedule the work if it can't take the lock. Testing: existing selftest passes | ||||
| CVE-2023-54292 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix data race on CQP request done KCSAN detects a data race on cqp_request->request_done memory location which is accessed locklessly in irdma_handle_cqp_op while being updated in irdma_cqp_ce_handler. Annotate lockless intent with READ_ONCE/WRITE_ONCE to avoid any compiler optimizations like load fusing and/or KCSAN warning. [222808.417128] BUG: KCSAN: data-race in irdma_cqp_ce_handler [irdma] / irdma_wait_event [irdma] [222808.417532] write to 0xffff8e44107019dc of 1 bytes by task 29658 on cpu 5: [222808.417610] irdma_cqp_ce_handler+0x21e/0x270 [irdma] [222808.417725] cqp_compl_worker+0x1b/0x20 [irdma] [222808.417827] process_one_work+0x4d1/0xa40 [222808.417835] worker_thread+0x319/0x700 [222808.417842] kthread+0x180/0x1b0 [222808.417852] ret_from_fork+0x22/0x30 [222808.417918] read to 0xffff8e44107019dc of 1 bytes by task 29688 on cpu 1: [222808.417995] irdma_wait_event+0x1e2/0x2c0 [irdma] [222808.418099] irdma_handle_cqp_op+0xae/0x170 [irdma] [222808.418202] irdma_cqp_cq_destroy_cmd+0x70/0x90 [irdma] [222808.418308] irdma_puda_dele_rsrc+0x46d/0x4d0 [irdma] [222808.418411] irdma_rt_deinit_hw+0x179/0x1d0 [irdma] [222808.418514] irdma_ib_dealloc_device+0x11/0x40 [irdma] [222808.418618] ib_dealloc_device+0x2a/0x120 [ib_core] [222808.418823] __ib_unregister_device+0xde/0x100 [ib_core] [222808.418981] ib_unregister_device+0x22/0x40 [ib_core] [222808.419142] irdma_ib_unregister_device+0x70/0x90 [irdma] [222808.419248] i40iw_close+0x6f/0xc0 [irdma] [222808.419352] i40e_client_device_unregister+0x14a/0x180 [i40e] [222808.419450] i40iw_remove+0x21/0x30 [irdma] [222808.419554] auxiliary_bus_remove+0x31/0x50 [222808.419563] device_remove+0x69/0xb0 [222808.419572] device_release_driver_internal+0x293/0x360 [222808.419582] driver_detach+0x7c/0xf0 [222808.419592] bus_remove_driver+0x8c/0x150 [222808.419600] driver_unregister+0x45/0x70 [222808.419610] auxiliary_driver_unregister+0x16/0x30 [222808.419618] irdma_exit_module+0x18/0x1e [irdma] [222808.419733] __do_sys_delete_module.constprop.0+0x1e2/0x310 [222808.419745] __x64_sys_delete_module+0x1b/0x30 [222808.419755] do_syscall_64+0x39/0x90 [222808.419763] entry_SYSCALL_64_after_hwframe+0x63/0xcd [222808.419829] value changed: 0x01 -> 0x03 | ||||
| CVE-2023-54285 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iomap: Fix possible overflow condition in iomap_write_delalloc_scan folio_next_index() returns an unsigned long value which left shifted by PAGE_SHIFT could possibly cause an overflow on 32-bit system. Instead use folio_pos(folio) + folio_size(folio), which does this correctly. | ||||
| CVE-2023-54280 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential race when tree connecting ipc Protect access of TCP_Server_Info::hostname when building the ipc tree name as it might get freed in cifsd thread and thus causing an use-after-free bug in __tree_connect_dfs_target(). Also, while at it, update status of IPC tcon on success and then avoid any extra tree connects. | ||||
| CVE-2023-54269 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: double free xprt_ctxt while still in use When an RPC request is deferred, the rq_xprt_ctxt pointer is moved out of the svc_rqst into the svc_deferred_req. When the deferred request is revisited, the pointer is copied into the new svc_rqst - and also remains in the svc_deferred_req. In the (rare?) case that the request is deferred a second time, the old svc_deferred_req is reused - it still has all the correct content. However in that case the rq_xprt_ctxt pointer is NOT cleared so that when xpo_release_xprt is called, the ctxt is freed (UDP) or possible added to a free list (RDMA). When the deferred request is revisited for a second time, it will reference this ctxt which may be invalid, and the free the object a second time which is likely to oops. So change svc_defer() to *always* clear rq_xprt_ctxt, and assert that the value is now stored in the svc_deferred_req. | ||||
| CVE-2023-54262 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Don't clone flow post action attributes second time The code already clones post action attributes in mlx5e_clone_flow_attr_for_post_act(). Creating another copy in mlx5e_tc_post_act_add() is a erroneous leftover from original implementation. Instead, assign handle->attribute to post_attr provided by the caller. Note that cloning the attribute second time is not just wasteful but also causes issues like second copy not being properly updated in neigh update code which leads to following use-after-free: Feb 21 09:02:00 c-237-177-40-045 kernel: BUG: KASAN: use-after-free in mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_report+0xbb/0x1a0 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_stack+0x1e/0x40 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_set_track+0x21/0x30 Feb 21 09:02:00 c-237-177-40-045 kernel: __kasan_kmalloc+0x7a/0x90 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_stack+0x1e/0x40 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_set_track+0x21/0x30 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_free_info+0x2a/0x40 Feb 21 09:02:00 c-237-177-40-045 kernel: ____kasan_slab_free+0x11a/0x1b0 Feb 21 09:02:00 c-237-177-40-045 kernel: page dumped because: kasan: bad access detected Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 8833): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0xf2ff71), err(-22) Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_core 0000:08:00.0 enp8s0f0: Failed to add post action rule Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_core 0000:08:00.0: mlx5e_tc_encap_flows_add:190:(pid 8833): Failed to update flow post acts, -22 Feb 21 09:02:00 c-237-177-40-045 kernel: Call Trace: Feb 21 09:02:00 c-237-177-40-045 kernel: <TASK> Feb 21 09:02:00 c-237-177-40-045 kernel: dump_stack_lvl+0x57/0x7d Feb 21 09:02:00 c-237-177-40-045 kernel: print_report+0x170/0x471 Feb 21 09:02:00 c-237-177-40-045 kernel: ? mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_report+0xbb/0x1a0 Feb 21 09:02:00 c-237-177-40-045 kernel: ? mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: ? __module_address.part.0+0x62/0x200 Feb 21 09:02:00 c-237-177-40-045 kernel: ? mlx5_cmd_stub_create_flow_table+0xd0/0xd0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: ? __raw_spin_lock_init+0x3b/0x110 Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_cmd_create_fte+0x80/0xb0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: add_rule_fg+0xe80/0x19c0 [mlx5_core] -- Feb 21 09:02:00 c-237-177-40-045 kernel: Allocated by task 13476: Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_stack+0x1e/0x40 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_set_track+0x21/0x30 Feb 21 09:02:00 c-237-177-40-045 kernel: __kasan_kmalloc+0x7a/0x90 Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_packet_reformat_alloc+0x7b/0x230 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_tc_tun_create_header_ipv4+0x977/0xf10 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_attach_encap+0x15b4/0x1e10 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: post_process_attr+0x305/0xa30 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_tc_add_fdb_flow+0x4c0/0xcf0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_configure_flower+0xcaa/0x4b90 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_rep_setup_tc_cls_flower+0x99/0x1b0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_rep_setup_tc_cb+0x133/0x1e0 [mlx5_core] -- Feb 21 09:02:00 c-237-177-40-045 kernel: Freed by task 8833: Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_s ---truncated--- | ||||
| CVE-2023-54258 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential oops in cifs_oplock_break With deferred close we can have closes that race with lease breaks, and so with the current checks for whether to send the lease response, oplock_response(), this can mean that an unmount (kill_sb) can occur just before we were checking if the tcon->ses is valid. See below: [Fri Aug 4 04:12:50 2023] RIP: 0010:cifs_oplock_break+0x1f7/0x5b0 [cifs] [Fri Aug 4 04:12:50 2023] Code: 7d a8 48 8b 7d c0 c0 e9 02 48 89 45 b8 41 89 cf e8 3e f5 ff ff 4c 89 f7 41 83 e7 01 e8 82 b3 03 f2 49 8b 45 50 48 85 c0 74 5e <48> 83 78 60 00 74 57 45 84 ff 75 52 48 8b 43 98 48 83 eb 68 48 39 [Fri Aug 4 04:12:50 2023] RSP: 0018:ffffb30607ddbdf8 EFLAGS: 00010206 [Fri Aug 4 04:12:50 2023] RAX: 632d223d32612022 RBX: ffff97136944b1e0 RCX: 0000000080100009 [Fri Aug 4 04:12:50 2023] RDX: 0000000000000001 RSI: 0000000080100009 RDI: ffff97136944b188 [Fri Aug 4 04:12:50 2023] RBP: ffffb30607ddbe58 R08: 0000000000000001 R09: ffffffffc08e0900 [Fri Aug 4 04:12:50 2023] R10: 0000000000000001 R11: 000000000000000f R12: ffff97136944b138 [Fri Aug 4 04:12:50 2023] R13: ffff97149147c000 R14: ffff97136944b188 R15: 0000000000000000 [Fri Aug 4 04:12:50 2023] FS: 0000000000000000(0000) GS:ffff9714f7c00000(0000) knlGS:0000000000000000 [Fri Aug 4 04:12:50 2023] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Fri Aug 4 04:12:50 2023] CR2: 00007fd8de9c7590 CR3: 000000011228e000 CR4: 0000000000350ef0 [Fri Aug 4 04:12:50 2023] Call Trace: [Fri Aug 4 04:12:50 2023] <TASK> [Fri Aug 4 04:12:50 2023] process_one_work+0x225/0x3d0 [Fri Aug 4 04:12:50 2023] worker_thread+0x4d/0x3e0 [Fri Aug 4 04:12:50 2023] ? process_one_work+0x3d0/0x3d0 [Fri Aug 4 04:12:50 2023] kthread+0x12a/0x150 [Fri Aug 4 04:12:50 2023] ? set_kthread_struct+0x50/0x50 [Fri Aug 4 04:12:50 2023] ret_from_fork+0x22/0x30 [Fri Aug 4 04:12:50 2023] </TASK> To fix this change the ordering of the checks before sending the oplock_response to first check if the openFileList is empty. | ||||
| CVE-2023-54254 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Don't leak a resource on eviction error On eviction errors other than -EMULTIHOP we were leaking a resource. Fix. v2: - Avoid yet another goto (Andi Shyti) | ||||