| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036. |
| A vulnerability in the web functionality of the Cisco Prime LAN Management Solution could allow an authenticated, remote attacker to hijack another user's administrative session, aka a Session Fixation Vulnerability. The vulnerability is due to the reuse of a preauthentication session token as part of the postauthentication session. An attacker could exploit this vulnerability by obtaining the presession token ID. An exploit could allow an attacker to hijack an existing user's session. Known Affected Releases 4.2(5). Cisco Bug IDs: CSCvf58392. |
| IBM Tivoli Endpoint Manager (IBM BigFix Platform 9.2 and 9.5) does not perform an authentication check for a critical resource or functionality allowing anonymous users access to protected areas. IBM X-Force ID: 123862. |
| A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751. |
| An issue was discovered in ABOOT in OnePlus 3 and 3T OxygenOS before 4.0.2. The attacker can reboot the device into the fastboot mode, which could be done without any authentication. A physical attacker can press the "Volume Up" button during device boot, where an attacker with ADB access can issue the adb reboot bootloader command. Then, the attacker can put the platform's SELinux in permissive mode, which severely weakens it, by issuing: fastboot oem selinux permissive. |
| It was found that Keycloak oauth would permit an authenticated resource to obtain an access/refresh token pair from the authentication server, permitting indefinite usage in the case of permission revocation. An attacker on an already compromised resource could use this flaw to grant himself continued permissions and possibly conduct further attacks. |
| On TP-Link NC250 devices with firmware through 1.2.1 build 170515, anyone can view video and audio without authentication via an rtsp://admin@yourip:554/h264_hd.sdp URL. |
| The Basic authentication code in WEBrick library in Ruby before 2.2.8, 2.3.x before 2.3.5, and 2.4.x through 2.4.1 allows remote attackers to inject terminal emulator escape sequences into its log and possibly execute arbitrary commands via a crafted user name. |
| The lockscreen on Elephone P9000 devices (running Android 6.0) allows physically proximate attackers to bypass a wrong-PIN lockout feature by pressing backspace after each PIN guess. |
| A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2. |
| Vulnerability in web application Kind Editor v4.1.12, kindeditor/php/upload_json.php does not check authentication before allow users to upload files. |
| Revive Adserver before 3.2.3 suffers from Improper Restriction of Excessive Authentication Attempts. The login page of Revive Adserver is vulnerable to password-guessing attacks. An account lockdown feature was considered, but rejected to avoid introducing service disruptions to regular users during such attacks. A random delay has instead been introduced as a countermeasure in case of password failures, along with a system to discourage parallel brute forcing. These systems will effectively allow the valid users to log in to the adserver, even while an attack is in progress. |
| An issue was discovered in Moxa OnCell OnCellG3470A-LTE, AWK-1131A/3131A/4131A Series, AWK-3191 Series, AWK-5232/6232 Series, AWK-1121/1127 Series, WAC-1001 V2 Series, WAC-2004 Series, AWK-3121-M12-RTG Series, AWK-3131-M12-RCC Series, AWK-5232-M12-RCC Series, TAP-6226 Series, AWK-3121/4121 Series, AWK-3131/4131 Series, and AWK-5222/6222 Series. Any user is able to download log files by accessing a specific URL. |
| An issue was discovered in Kabona AB WebDatorCentral (WDC) application prior to Version 3.4.0. WDC does not limit authentication attempts that may allow a brute force attack method. |
| An Improper Authentication issue was discovered in JanTek JTC-200, all versions. The improper authentication could provide an undocumented BusyBox Linux shell accessible over the TELNET service without any authentication. |
| Insufficient authentication vulnerability in Junos Space before 15.2R2 allows remote network based users with access to Junos Space web interface to perform certain administrative tasks without authentication. |
| The Toshiba FlashAir SD-WD/WC series Class 6 model with firmware version 1.00.04 and later, FlashAir SD-WD/WC series Class 10 model W-02 with firmware version 2.00.02 and later, FlashAir SD-WE series Class 10 model W-03, FlashAir Class 6 model with firmware version 1.00.04 and later, FlashAir II Class 10 model W-02 series with firmware version 2.00.02 and later, FlashAir III Class 10 model W-03 series, FlashAir Class 6 model with firmware version 1.00.04 and later, FlashAir W-02 series Class 10 model with firmware version 2.00.02 and later, FlashAir W-03 series Class 10 model does not require authentication on accepting a connection from STA side LAN when "Internet pass-thru Mode" is enabled, which allows attackers with access to STA side LAN can obtain files or data. |
| The telnetd service in FreeBSD 9.3, 10.1, 10.2, 10.3, and 11.0 allows remote attackers to inject arguments to login and bypass authentication via vectors involving a "sequence of memory allocation failures." |
| Cybozu Garoon before 4.2.2 allows remote attackers to bypass login authentication via vectors related to API use. |
| Improper Authentication vulnerability in the "LDAP / SSO Authentication" (ig_ldap_sso_auth) extension 2.0.0 for TYPO3. |
