| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| WarehousePG (WHPG) 6.27.1 through 6.27.7 and 7.2.1 through 7.6.1 are affected by an out-of-bounds write vulnerability (CWE-787) in gpfdist, the file server used to load and unload external tables. When gpfdist attaches a request to a session, it sizes two internal arrays from the client-supplied X-GP-SEGMENT-COUNT header and writes to them at the index given by the X-GP-SEGMENT-ID header, without checking that the index is non-negative and smaller than the count (CWE-129). gpfdist does not authenticate callers unless gpfdists is used with client certificate verification, so an attacker who can reach the gpfdist port can crash it with a single HTTP request, failing every external table load or unload that uses that gpfdist instance. gpfdist is normally reachable only from the cluster's internal network. |
| Cesanta Mongoose 7.22 before 7.24 with the built-in TLS stack contains an out-of-bounds read in mg_timegm() that allows remote attackers to crash the process via crafted X.509 certificate validity months. Attackers can present a certificate with month '00' or out-of-range values during the handshake, before signature verification, causing an unchecked dm array index and denial of service. |
| HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, the experimental CRAM v4 functions cram_xpack_decode_char and cram_xrle_decode_char do not validate that attacker-controlled decode sizes remain within their expanded input arrays. Crafted CRAM data can therefore make either decoder read beyond the supplied input buffer, potentially disclosing process-state information or crashing the process through invalid memory access. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24. |
| HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, the CRAM BETA decoder functions cram_beta_decode_long, cram_beta_decode_int, and cram_beta_decode_char, and the experimental CRAM v4 XPACK functions cram_xpack_decode_long and cram_xpack_decode_int, have bounds-checking flaws caused by integer overflow after a multiplication. The resulting incorrect bounds check can allow decoding to read beyond the supplied input buffer, potentially leaking process-state information or crashing the process. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24. |
| Go-Guerrilla SMTP Daemon is a lightweight SMTP server written in Go. In 1.6.7 and earlier, according to the repository advisory's structured affected range, server.go defines the seven-byte cmdXCLIENT token, but the XCLIENT handler slices input[8:] after matching only that seven-byte verb, so a bare command causes an out-of-bounds panic in handleClient and terminates the daemon because that connection goroutine does not recover the panic. The issue is reachable by an unauthenticated client when the non-default xclient_on setting is enabled; no HELO command is required. The repository fix is present in version 1.6.7-1. |
| rclone versions >= v1.72.0 and <= v1.74.4 (fixed in v1.75.0) contain multiple denial-of-service vulnerabilities in the archive backend's SquashFS parser, which relies on the github.com/diskfs/go-diskfs dependency. The parser fails to validate attacker-controlled superblock and metadata values before use. An attacker who can place or modify a SquashFS image in storage exposed through an rclone :archive: remote can craft a malicious image that triggers an integer division-by-zero panic (zero block size), an out-of-bounds slice panic (out-of-range inode metadata offset), or a non-progress CPU loop (truncated metadata stream). Variants 1 and 2 terminate the rclone process and, via 'rclone serve sftp', can crash the entire SFTP server; variant 3 causes sustained CPU consumption. Parsing is lazy, so a victim or remote client must address or descend into the malicious archive object to trigger it. |
| Contrast before 1.21.0 contains a panic vulnerability in the transit-engine endpoint's ciphertextContainer.UnmarshalJSON function that fails to validate decoded ciphertext length before slicing. An authenticated workload with a valid mesh certificate can trigger a runtime panic by submitting a short base64-encoded ciphertext, causing log spam and request failures without crashing the process. |
| A flaw was found in the file-xmc plugin in GIMP. When processing a specially crafted XMC image file, the plugin does not properly validate the comment subtype before using it as an array index. This missing validation leads to out-of-bounds memory access, invalid free and use-after-free issues. This vulnerability can result in an application crash, leading to a denial of service, or potentially allow for arbitrary code execution. |
| Microsoft jxrlib through 1.1 and the mircomir jxrlib fork before 1.3.1 contain a global buffer over-read vulnerability in initLookupTables() in image/decode/strdec.c caused by an unchecked bit depth index. Attackers can supply a crafted JPEG XR file with an out-of-range bit depth in the image header to read beyond the cbChannels array, causing crashes or memory disclosure. |
| Missing protection mechanism for alternate hardware interface vulnerability in Johnson Controls iSTAR Ultra, Johnson Controls iSTAR Ultra SE, Johnson Controls iSTAR Ultra G2, Johnson Controls iSTAR Ultra G2 SE, and Johnson Controls iSTAR Edge G2 allows CAPEC‑554: Functionality Bypass.
This issue affects iSTAR Ultra: before 6.9.2.CU02; iSTAR Ultra SE: before 6.9.2.CU02; iSTAR Ultra G2: before 6.9.2.CU02; iSTAR Ultra G2 SE: before 6.9.2.CU02; iSTAR Edge G2: before 6.9.2.CU02. |
| Missing protection mechanism for alternate hardware interface vulnerability in Johnson Controls iSTAR Ultra and Johnson Controls iSTAR Ultra SE allows CAPEC‑554: Functionality Bypass.
This issue affects iSTAR Ultra: before 6.9.2.CU02; iSTAR Ultra SE: before 6.9.2.CU02. |
| MCUboot's Zephyr serial-recovery upload handler bs_upload() in boot/boot_serial/src/boot_serial.c decodes the host-supplied image field of an MCUmgr image-upload request into img_num (a full 32-bit value) and latches it on the off == 0 packet without any range check. It then passes img_num straight to flash_area_id_from_multi_image_slot(img_num, 0), which on the Zephyr port resolves to __flash_area_ids_for_slot() in boot/zephyr/include/sysflash/sysflash.h and indexes the static const int all_slots[] table as all_slots[img_num 2]. That table holds only MCUBOOT_IMAGE_NUMBER 2 entries, so any img_num >= MCUBOOT_IMAGE_NUMBER is an out-of-bounds read.
The path is reachable by anyone with access to the serial / SMP recovery console, which is unauthenticated by design, and the bad value is supplied before any image signature is verified. The defect is specific to the default non-direct upload path (MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD disabled) on the Zephyr port with the array-backed slot layout (not CONFIG_SINGLE_APPLICATION_SLOT). It is not gated on a multi-image configuration: MCUBOOT_IMAGE_NUMBER defaults to 1, so even a default single-image build is affected for any image >= 1. The MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD path is safe (its flash_area_id_from_direct_image() switch returns -EINVAL for unknown indices).
flash_area_id_from_multi_image_slot() takes a signed int image_index while img_num is uint32_t, so the attacker controls the sign of the index as well as its magnitude: an image of 0xFFFFFFFE converts to -2 and reads all_slots[-4], off the front of the table, while large positive values read off the end (CWE-192). (0xFFFFFFFF itself is the "no image given" sentinel and selects image 0.) Either way the index multiply img * 2 is performed in int, so a wild offset yields a bus/hard fault, giving a reliable denial of service of the bootloader during recovery. For moderately out-of-range indices the read returns adjacent .rodata as a garbage flash-area id that is handed to flash_area_open(); this normally fails with MGMT_ERR_EINVAL, but if the garbage id happens to match a valid non-image partition, the subsequent erase/write can target a partition outside the image set (CWE-787). The attacker-supplied value is never echoed back, so there is no information disclosure. The fix is to reject img_num >= BOOT_IMAGE_NUMBER on the off == 0 packet, before the slot lookup. The comparison must be made on the unsigned img_num: an equivalent guard applied after the conversion to int would not reject the negative case above. __flash_area_ids_for_slot() should bounds-check its own arguments as defence in depth.
This vulnerability was reported independently twice: by NVIDIA Project Vanessa on 2026-06-22, and by Kai Phan (@kaimandalic) on 2026-07-19 as GHSA-8v33-88p6-jffj, which is closed as a duplicate of this advisory. Both original reports are reproduced in full below. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, in the official apps/epics client tool on v1.6.0-rc1 (not in the generic BACnet RPM ACK decoder alone) a malicious BACnet/IP endpoint can reply to the EPICS tool’s legitimate ReadPropertyMultiple request with a syntactically valid ReadPropertyMultiple-ACK that contains more heading properties than the tool’s fixed local storage can hold. The response is decoded successfully and later consumed by ProcessRPMData(), which writes property values into a fixed global array using an unbounded linear index. This results in a reproducible global-buffer-overflow in apps/epics/main.c. This is a network-reachable memory corruption in the official epics tool’s response-processing path. The root cause is that apps/epics treats a remotely supplied variable-length RPM property list as if it were a trusted, fixed-size local heading-property set. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-based out-of-bounds write exists in the Notification Class object implementation when handling AddListElement for the recipient-list property. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0. |
| Improper validation of array index in the MigTD's virtio-serial driver for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with a privileged user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Incorrect handling of unauthenticated downlink RRC Setup messages can cause the baseband to crash |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/IOV: Skip VF Resizable BAR restore on read error
sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register
to decide how many VF BARs to restore (nbars) and which VF BAR each
iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[],
which has only PCI_SRIOV_NUM_BARS (6) entries.
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN
reports this as:
UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]'
Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding
during a failed GC6 power state exit. The subsequent pci_restore_state()
invoked sriov_restore_vf_rebar_state() while config reads returned
0xffffffff, triggering the splat.
Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE.
No further VF BARs are touched, which is safe because a config read that
returns PCI_ERROR_RESPONSE indicates the device is unreachable and
restoration is pointless. This mirrors the guard in
pci_restore_rebar_state(). |
| Fraunhofer HHI VVdeC before 3.2.1 contains an out-of-bounds read vulnerability that allows attackers to crash the decoder by supplying bitstreams with overlapping slice CTU coverage. Attackers can code a CTU in a second slice so a bi-predicted BDOF coding unit carries a negative reference index, causing Slice::getRefPic to read outside m_apcRefPicList and crash decoding. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, udptl_rx_packet() used a peer-controlled FEC entry count directly to fill five-entry FEC arrays in a mod_spandsp T.38 session. A larger count wrote sender-controlled error-recovery data beyond those arrays and persisted the oversized count for a later reconstruction pass. Any peer able to deliver UDPTL to an established T.38 fax session can reach the parser, including deployments using fax applications or a T.38 gateway. The memory corruption can crash FreeSWITCH and end every active call, although remote code execution has not been demonstrated. This issue is fixed in version 1.11.2. |
| ASN1SCC is an open source ASN.1 compiler for embedded systems. Prior to 4.7.0.1, the ACN runtime function Acn_Dec_String_CharIndex_private in asn1crt/asn1crt_encoding_acn.c and the generated uPER decoder InternalItem_string_with_alpha_decode in StgC/uper_c.stg do not validate a decoded character index before reading allowedCharSet. For string alphabets whose size is not a power of two, a crafted message can select an unused encoded index, read a small bounded window of adjacent static program constants, and return the byte as a successfully decoded character. The full 128-character IA5String alphabet is not affected. This issue is fixed in version 4.7.0.1. |