Export limit exceeded: 424397 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 424397 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (424397 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53711 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a potential data corruption We must ensure that the subrequests are joined back into the head before we can retransmit a request. If the head was not on the commit lists, because the server wrote it synchronously, we still need to add it back to the retransmission list. Add a call that mirrors the effect of nfs_cancel_remove_inode() for O_DIRECT. | ||||
| CVE-2023-53705 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix out-of-bounds access in ipv6_find_tlv() optlen is fetched without checking whether there is more than one byte to parse. It can lead to out-of-bounds access. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2023-54223 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix invalid buffer access for legacy rq The below crash can be encountered when using xdpsock in rx mode for legacy rq: the buffer gets released in the XDP_REDIRECT path, and then once again in the driver. This fix sets the flag to avoid releasing on the driver side. XSK handling of buffers for legacy rq was relying on the caller to set the skip release flag. But the referenced fix started using fragment counts for pages instead of the skip flag. Crash log: general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28 Code: ... RSP: 0018:ffff88810082fc98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901 RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006 R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000 R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00 FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x32/0x80 ? exc_general_protection+0x192/0x390 ? asm_exc_general_protection+0x22/0x30 ? 0xffffffffa000b514 ? bpf_prog_03b13f331978c78c+0xf/0x28 mlx5e_xdp_handle+0x48/0x670 [mlx5_core] ? dev_gro_receive+0x3b5/0x6e0 mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core] mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core] mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core] mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core] __napi_poll+0x25/0x1a0 net_rx_action+0x28a/0x300 __do_softirq+0xcd/0x279 ? sort_range+0x20/0x20 run_ksoftirqd+0x1a/0x20 smpboot_thread_fn+0xa2/0x130 kthread+0xc9/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2023-54210 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor() KASAN reports that there's a use-after-free in hci_remove_adv_monitor(). Trawling through the disassembly, you can see that the complaint is from the access in bt_dev_dbg() under the HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because msft_remove_monitor() can end up freeing the monitor structure. Specifically: hci_remove_adv_monitor() -> msft_remove_monitor() -> msft_remove_monitor_sync() -> msft_le_cancel_monitor_advertisement_cb() -> hci_free_adv_monitor() Let's fix the problem by just stashing the relevant data when it's still valid. | ||||
| CVE-2023-54198 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tty: fix out-of-bounds access in tty_driver_lookup_tty() When specifying an invalid console= device like console=tty3270, tty_driver_lookup_tty() returns the tty struct without checking whether index is a valid number. To reproduce: qemu-system-x86_64 -enable-kvm -nographic -serial mon:stdio \ -kernel ../linux-build-x86/arch/x86/boot/bzImage \ -append "console=ttyS0 console=tty3270" This crashes with: [ 0.770599] BUG: kernel NULL pointer dereference, address: 00000000000000ef [ 0.771265] #PF: supervisor read access in kernel mode [ 0.771773] #PF: error_code(0x0000) - not-present page [ 0.772609] Oops: 0000 [#1] PREEMPT SMP PTI [ 0.774878] RIP: 0010:tty_open+0x268/0x6f0 [ 0.784013] chrdev_open+0xbd/0x230 [ 0.784444] ? cdev_device_add+0x80/0x80 [ 0.784920] do_dentry_open+0x1e0/0x410 [ 0.785389] path_openat+0xca9/0x1050 [ 0.785813] do_filp_open+0xaa/0x150 [ 0.786240] file_open_name+0x133/0x1b0 [ 0.786746] filp_open+0x27/0x50 [ 0.787244] console_on_rootfs+0x14/0x4d [ 0.787800] kernel_init_freeable+0x1e4/0x20d [ 0.788383] ? rest_init+0xc0/0xc0 [ 0.788881] kernel_init+0x11/0x120 [ 0.789356] ret_from_fork+0x22/0x30 | ||||
| CVE-2023-54202 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix race condition UAF in i915_perf_add_config_ioctl Userspace can guess the id value and try to race oa_config object creation with config remove, resulting in a use-after-free if we dereference the object after unlocking the metrics_lock. For that reason, unlocking the metrics_lock must be done after we are done dereferencing the object. [tursulin: Manually added stable tag.] (cherry picked from commit 49f6f6483b652108bcb73accd0204a464b922395) | ||||
| CVE-2026-98098 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in tipc_named_node_up() on empty publication list User-space applications can bind a large number of service addresses to one or more sockets. Each binding of a local-scope service address inserts one entry (publication) into the TIPC name table. If the number of these publications exceeds TIPC_MAX_PUBL (65535), protocol service types (such as node state and link state) are no longer inserted into the name table. This causes two issues: 1. User-space applications subscribing to node or link up/down events stop receiving notifications. 2. A NULL pointer dereference can occur: BUG: kernel NULL pointer dereference, address: 00000000000000d0 ... CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full) ... RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221) ... Call Trace: <IRQ> tipc_node_write_unlock (net/tipc/node.c:428) tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189) tipc_udp_recv (net/tipc/udp_media.c:389) Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute) -----------------------------|----------------------------- | ... | list_for_each_entry(publ, pls, binding_node) { | ... | __skb_queue_tail(list, skb); | ... | } | ... | hdr = buf_msg(skb_peek_tail(list)); ... | tipc_nametbl_publish(); | If 'tipc_nametbl_publish()' (Thread 1) fails because the number of local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference. Fix these issues by allowing protocol service types (node state, link state, and topology server) to be inserted into the name table unconditionally. This ensures that users subscribing to these types always receive notifications. In addition, the maximum number of local user publications is reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size calculated in tipc_link_set_queue_limits() remains valid. | ||||
| CVE-2026-98097 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: Dont send random pad bytes in RESET/ACTIVATE messages The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer. Replace the strcpy(data, l->if_name) with memcpy() so that the pad bytes are actually written (l->if_name[] is zero padded) rather than sending random bytes from the skb to the remote system. Replace two other strcpy() with strscpy(). | ||||
| CVE-2026-111381 | 1 Freerdp | 1 Freerdp | 2026-10-28 | 7.3 High |
| FreeRDP before 3.32.0 contains a heap buffer overflow vulnerability in persistent_cache_read_entry_v2 that allows local attackers to corrupt heap memory via integer wraparound in bitmap size calculation. Attackers can craft a persistent cache v2 file with oversized width and height values that causes mismatched entry size accounting and fixed 16 KiB reads, leading to crashes or code execution when loaded. | ||||
| CVE-2026-113943 | 1 Apple | 1 Macos | 2026-10-28 | 6.5 Medium |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. Mounting a maliciously crafted disk image may cause unexpected system termination or corrupt kernel memory. | ||||
| CVE-2026-87357 | 1 Oracle | 1 Order Capture | 2026-10-28 | 7.2 High |
| Vulnerability in the Order Capture product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Order Capture. Successful attacks of this vulnerability can result in takeover of Order Capture. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-116171 | 1 B3log | 1 Siyuan | 2026-10-28 | 4.4 Medium |
| SiYuan 3.5.4 before 3.8.7 on Windows contains a sensitive-path denylist bypass in IsSensitivePath because the Windows extended-length prefix (\\?\) survives filepath.Clean and matches no forbidden prefix. Authenticated API callers can prepend the prefix to localPath in /api/import/importStdMd to copy workspace conf files, including the API token and TLS private keys, into assets served to unauthenticated clients. | ||||
| CVE-2026-98113 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: rate limit unmapped SID errors A client can include many structurally valid but unmapped SIDs in a DACL. Logging every mapping failure lets one request generate hundreds of kernel error messages. Rate limit the message to prevent an authenticated client from flooding the kernel log. | ||||
| CVE-2026-98112 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix listener task lifetime on netdev events The listener thread exits when its listening socket is shutdown. The netdevice notifier shuts down the socket before calling kthread_stop(), so the task_struct can be freed before kthread_stop() gets its reference. Create the listener in a stopped state and hold an extra task_struct reference until kthread_stop_put() completes. Also stop and release listeners before freeing their interface records during TCP teardown. | ||||
| CVE-2026-98111 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate version TLV value lengths btintel_parse_version_tlv() verifies that a complete TLV is present in the response, but it does not ensure that the value is long enough for the specific TLV type. A short value can therefore cause an out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(), or memcpy(). Reject values shorter than the minimum required by each known TLV type. Also reject responses that do not contain the Command Complete Status field. | ||||
| CVE-2026-98110 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: bound firmware ID by TLV length The firmware ID is treated as a NUL-terminated string even though the TLV length is its only boundary. If the value does not contain a NUL terminator, snprintf() can read beyond the received response. Limit the conversion to the advertised TLV value length. | ||||
| CVE-2026-63939 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Compute the correct max length of the in-GHCB scratch area When setting the length of the GHCB scratch area, and the area is in the GHCB shared buffer, set the effective length of the scratch area to the max possible size given the start of the guest-provided pointer, and the end of the shared buffer. The code was "fine" when first introduced, as KVM doesn't consult the length of the buffer when emulating MMIO, because the passed in @len always specifies the *max* size required. But for PSC requests, the incoming @len is just the minimum length (to process the header), and KVM needs to know the full size of the scratch area to avoid buffer overflows (spoiler alert). Opportunistically rename @len => @min_len to better reflect its role. | ||||
| CVE-2026-96626 | 1 Getarcaneapp | 1 Arcane | 2026-10-28 | 8.5 High |
| Arcane is an interface for managing Docker containers, images, networks, and volumes. Prior to 2.5.0, UpdateRegistry and TestRegistry in backend/api/services/container_registry_service.go allow the registry URL to change while preserving the stored encrypted token. When a holder of registries:update and registries:test repoints a generic registry URL without supplying a replacement token, TestRegistry decrypts the preserved token and RegistryLogin sends it to the attacker-controlled host because normalizeRegistryServerAddressInternal does not restrict the destination. This exposes the stored container-registry PAT or password and can enable image access or tampering. This issue is fixed in version 2.5.0. | ||||
| CVE-2026-91351 | 1 Oracle | 1 Outside In Technology | 2026-10-28 | 6.1 Medium |
| Vulnerability in the Oracle Outside In Technology product of Oracle Fusion Middleware (component: Outside In Clean Content SDK). The supported version that is affected is 8.5.8. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Outside In Technology executes to compromise Oracle Outside In Technology. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Outside In Technology accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Outside In Technology. CVSS 3.1 Base Score 6.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:L). | ||||
| CVE-2026-91338 | 1 Oracle | 1 Isupport | 2026-10-28 | 7.1 High |
| Vulnerability in the iSupport product of Oracle E-Business Suite (component: Internal operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise iSupport. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all iSupport accessible data as well as unauthorized read access to a subset of iSupport accessible data. CVSS 3.1 Base Score 7.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:N). | ||||