Export limit exceeded: 25983 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25983 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40157 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller When loading the i10nm_edac driver on some Intel Granite Rapids servers, a call trace may appear as follows: UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:453:16 shift exponent -66 is negative ... __ubsan_handle_shift_out_of_bounds+0x1e3/0x390 skx_get_dimm_info.cold+0x47/0xd40 [skx_edac_common] i10nm_get_dimm_config+0x23e/0x390 [i10nm_edac] skx_register_mci+0x159/0x220 [skx_edac_common] i10nm_init+0xcb0/0x1ff0 [i10nm_edac] ... This occurs because some BIOS may disable a memory controller if there aren't any memory DIMMs populated on this memory controller. The DIMMMTR register of this disabled memory controller contains the invalid value ~0, resulting in the call trace above. Fix this call trace by skipping DIMM enumeration on a disabled memory controller. | ||||
| CVE-2025-68227 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix proto fallback detection with BPF The sockmap feature allows bpf syscall from userspace, or based on bpf sockops, replacing the sk_prot of sockets during protocol stack processing with sockmap's custom read/write interfaces. ''' tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot ''' When the server has MPTCP enabled but the client sends a TCP SYN without MPTCP, subflow_syn_recv_sock() performs a fallback on the subflow, replacing the subflow sk's sk_prot with the native sk_prot. ''' subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override() ''' Then, this subflow can be normally used by sockmap, which replaces the native sk_prot with sockmap's custom sk_prot. The issue occurs when the user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops(). Here, it uses sk->sk_prot to compare with the native sk_prot, but this is incorrect when sockmap is used, as we may incorrectly set sk->sk_socket->ops. This fix uses the more generic sk_family for the comparison instead. Additionally, this also prevents a WARNING from occurring: result from ./scripts/decode_stacktrace.sh: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \ (net/mptcp/protocol.c:4005) Modules linked in: ... PKRU: 55555554 Call Trace: <TASK> do_accept (net/socket.c:1989) __sys_accept4 (net/socket.c:2028 net/socket.c:2057) __x64_sys_accept (net/socket.c:2067) x64_sys_call (arch/x86/entry/syscall_64.c:41) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f87ac92b83d ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-68222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc s32_pinctrl_desc is allocated with devm_kmalloc(), but not all of its fields are initialized. Notably, num_custom_params is used in pinconf_generic_parse_dt_config(), resulting in intermittent allocation errors, such as the following splat when probing i2c-imx: WARNING: CPU: 0 PID: 176 at mm/page_alloc.c:4795 __alloc_pages_noprof+0x290/0x300 [...] Hardware name: NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) (DT) [...] Call trace: __alloc_pages_noprof+0x290/0x300 (P) ___kmalloc_large_node+0x84/0x168 __kmalloc_large_node_noprof+0x34/0x120 __kmalloc_noprof+0x2ac/0x378 pinconf_generic_parse_dt_config+0x68/0x1a0 s32_dt_node_to_map+0x104/0x248 dt_to_map_one_config+0x154/0x1d8 pinctrl_dt_to_map+0x12c/0x280 create_pinctrl+0x6c/0x270 pinctrl_get+0xc0/0x170 devm_pinctrl_get+0x50/0xa0 pinctrl_bind_pins+0x60/0x2a0 really_probe+0x60/0x3a0 [...] __platform_driver_register+0x2c/0x40 i2c_adap_imx_init+0x28/0xff8 [i2c_imx] [...] This results in later parse failures that can cause issues in dependent drivers: s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property [...] pca953x 0-0022: failed writing register: -6 i2c i2c-0: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property i2c i2c-1: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property i2c i2c-2: IMX I2C adapter registered Fix this by initializing s32_pinctrl_desc with devm_kzalloc() instead of devm_kmalloc() in s32_pinctrl_probe(), which sets the previously uninitialized fields to zero. | ||||
| CVE-2025-68219 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix memory leak in smb3_fs_context_parse_param error path Add proper cleanup of ctx->source and fc->source to the cifs_parse_mount_err error handler. This ensures that memory allocated for the source strings is correctly freed on all error paths, matching the cleanup already performed in the success path by smb3_cleanup_fs_context_contents(). Pointers are also set to NULL after freeing to prevent potential double-free issues. This change fixes a memory leak originally detected by syzbot. The leak occurred when processing Opt_source mount options if an error happened after ctx->source and fc->source were successfully allocated but before the function completed. The specific leak sequence was: 1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory 2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory 3. A subsequent error jumps to cifs_parse_mount_err 4. The old error handler freed passwords but not the source strings, causing the memory to leak. This issue was not addressed by commit e8c73eb7db0a ("cifs: client: fix memory leak in smb3_fs_context_parse_param"), which only fixed leaks from repeated fsconfig() calls but not this error path. Patch updated with minor change suggested by kernel test robot | ||||
| CVE-2025-68213 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix possible vport_config NULL pointer deref in remove Attempting to remove the driver will cause a crash in cases where the vport failed to initialize. Following trace is from an instance where the driver failed during an attempt to create a VF: [ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated [ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms) [ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028 ... [ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf] ... [ 1723.364973] Call Trace: [ 1723.365475] <TASK> [ 1723.365972] pci_device_remove+0x42/0xb0 [ 1723.366481] device_release_driver_internal+0x1a9/0x210 [ 1723.366987] pci_stop_bus_device+0x6d/0x90 [ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20 [ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120 [ 1723.368309] sriov_disable+0x34/0xe0 [ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf] [ 1723.368982] sriov_numvfs_store+0xda/0x1c0 Avoid the NULL pointer dereference by adding NULL pointer check for vport_config[i], before freeing user_config.q_coalesce. | ||||
| CVE-2025-40153 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: hugetlb: avoid soft lockup when mprotect to large memory area When calling mprotect() to a large hugetlb memory area in our customer's workload (~300GB hugetlb memory), soft lockup was observed: watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916] CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7 Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mte_clear_page_tags+0x14/0x24 lr : mte_sync_tags+0x1c0/0x240 sp : ffff80003150bb80 x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000 x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458 x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000 x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2c x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000 x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000 Call trace: mte_clear_page_tags+0x14/0x24 set_huge_pte_at+0x25c/0x280 hugetlb_change_protection+0x220/0x430 change_protection+0x5c/0x8c mprotect_fixup+0x10c/0x294 do_mprotect_pkey.constprop.0+0x2e0/0x3d4 __arm64_sys_mprotect+0x24/0x44 invoke_syscall+0x50/0x160 el0_svc_common+0x48/0x144 do_el0_svc+0x30/0xe0 el0_svc+0x30/0xf0 el0t_64_sync_handler+0xc4/0x148 el0t_64_sync+0x1a4/0x1a8 Soft lockup is not triggered with THP or base page because there is cond_resched() called for each PMD size. Although the soft lockup was triggered by MTE, it should be not MTE specific. The other processing which takes long time in the loop may trigger soft lockup too. So add cond_resched() for hugetlb to avoid soft lockup. | ||||
| CVE-2025-68204 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: arm: scmi: Fix genpd leak on provider registration failure If of_genpd_add_provider_onecell() fails during probe, the previously created generic power domains are not removed, leading to a memory leak and potential kernel crash later in genpd_debug_add(). Add proper error handling to unwind the initialized domains before returning from probe to ensure all resources are correctly released on failure. Example crash trace observed without this fix: | Unable to handle kernel paging request at virtual address fffffffffffffc70 | CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc1 #405 PREEMPT | Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : genpd_debug_add+0x2c/0x160 | lr : genpd_debug_init+0x74/0x98 | Call trace: | genpd_debug_add+0x2c/0x160 (P) | genpd_debug_init+0x74/0x98 | do_one_initcall+0xd0/0x2d8 | do_initcall_level+0xa0/0x140 | do_initcalls+0x60/0xa8 | do_basic_setup+0x28/0x40 | kernel_init_freeable+0xe8/0x170 | kernel_init+0x2c/0x140 | ret_from_fork+0x10/0x20 | ||||
| CVE-2025-68202 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix unsafe locking in the scx_dump_state() For built with CONFIG_PREEMPT_RT=y kernels, the dump_lock will be converted sleepable spinlock and not disable-irq, so the following scenarios occur: inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq_work/0/27 [HC0[0]:SC0[0]:HE1:SE1] takes: (&rq->__lock){?...}-{2:2}, at: raw_spin_rq_lock_nested+0x2b/0x40 {IN-HARDIRQ-W} state was registered at: lock_acquire+0x1e1/0x510 _raw_spin_lock_nested+0x42/0x80 raw_spin_rq_lock_nested+0x2b/0x40 sched_tick+0xae/0x7b0 update_process_times+0x14c/0x1b0 tick_periodic+0x62/0x1f0 tick_handle_periodic+0x48/0xf0 timer_interrupt+0x55/0x80 __handle_irq_event_percpu+0x20a/0x5c0 handle_irq_event_percpu+0x18/0xc0 handle_irq_event+0xb5/0x150 handle_level_irq+0x220/0x460 __common_interrupt+0xa2/0x1e0 common_interrupt+0xb0/0xd0 asm_common_interrupt+0x2b/0x40 _raw_spin_unlock_irqrestore+0x45/0x80 __setup_irq+0xc34/0x1a30 request_threaded_irq+0x214/0x2f0 hpet_time_init+0x3e/0x60 x86_late_time_init+0x5b/0xb0 start_kernel+0x308/0x410 x86_64_start_reservations+0x1c/0x30 x86_64_start_kernel+0x96/0xa0 common_startup_64+0x13e/0x148 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&rq->__lock); <Interrupt> lock(&rq->__lock); *** DEADLOCK *** stack backtrace: CPU: 0 UID: 0 PID: 27 Comm: irq_work/0 Call Trace: <TASK> dump_stack_lvl+0x8c/0xd0 dump_stack+0x14/0x20 print_usage_bug+0x42e/0x690 mark_lock.part.44+0x867/0xa70 ? __pfx_mark_lock.part.44+0x10/0x10 ? string_nocheck+0x19c/0x310 ? number+0x739/0x9f0 ? __pfx_string_nocheck+0x10/0x10 ? __pfx_check_pointer+0x10/0x10 ? kvm_sched_clock_read+0x15/0x30 ? sched_clock_noinstr+0xd/0x20 ? local_clock_noinstr+0x1c/0xe0 __lock_acquire+0xc4b/0x62b0 ? __pfx_format_decode+0x10/0x10 ? __pfx_string+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_vsnprintf+0x10/0x10 lock_acquire+0x1e1/0x510 ? raw_spin_rq_lock_nested+0x2b/0x40 ? __pfx_lock_acquire+0x10/0x10 ? dump_line+0x12e/0x270 ? raw_spin_rq_lock_nested+0x20/0x40 _raw_spin_lock_nested+0x42/0x80 ? raw_spin_rq_lock_nested+0x2b/0x40 raw_spin_rq_lock_nested+0x2b/0x40 scx_dump_state+0x3b3/0x1270 ? finish_task_switch+0x27e/0x840 scx_ops_error_irq_workfn+0x67/0x80 irq_work_single+0x113/0x260 irq_work_run_list.part.3+0x44/0x70 run_irq_workd+0x6b/0x90 ? __pfx_run_irq_workd+0x10/0x10 smpboot_thread_fn+0x529/0x870 ? __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x305/0x3f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x40/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> This commit therefore use rq_lock_irqsave/irqrestore() to replace rq_lock/unlock() in the scx_dump_state(). | ||||
| CVE-2025-68200 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Add bpf_prog_run_data_pointers() syzbot found that cls_bpf_classify() is able to change tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop(). WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline] WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214 struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block"), which added a wrong interaction with db58ba459202 ("bpf: wire in data and data_end for cls_act_bpf"). drop_reason was added later. Add bpf_prog_run_data_pointers() helper to save/restore the net_sched storage colliding with BPF data_meta/data_end. | ||||
| CVE-2025-68197 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix null pointer dereference in bnxt_bs_trace_check_wrap() With older FW, we may get the ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER for FW trace data type that has not been initialized. This will result in a crash in bnxt_bs_trace_type_wrap(). Add a guard to check for a valid magic_byte pointer before proceeding. | ||||
| CVE-2025-68177 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq/longhaul: handle NULL policy in longhaul_exit longhaul_exit() was calling cpufreq_cpu_get(0) without checking for a NULL policy pointer. On some systems, this could lead to a NULL dereference and a kernel warning or panic. This patch adds a check using unlikely() and returns early if the policy is NULL. Bugzilla: #219962 | ||||
| CVE-2025-68173 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix softlockup in ftrace_module_enable A soft lockup was observed when loading amdgpu module. If a module has a lot of tracable functions, multiple calls to kallsyms_lookup can spend too much time in RCU critical section and with disabled preemption, causing kernel panic. This is the same issue that was fixed in commit d0b24b4e91fc ("ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY kernels") and commit 42ea22e754ba ("ftrace: Add cond_resched() to ftrace_graph_set_hash()"). Fix it the same way by adding cond_resched() in ftrace_module_enable. | ||||
| CVE-2025-68169 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netpoll: Fix deadlock in memory allocation under spinlock Fix a AA deadlock in refill_skbs() where memory allocation while holding skb_pool->lock can trigger a recursive lock acquisition attempt. The deadlock scenario occurs when the system is under severe memory pressure: 1. refill_skbs() acquires skb_pool->lock (spinlock) 2. alloc_skb() is called while holding the lock 3. Memory allocator fails and calls slab_out_of_memory() 4. This triggers printk() for the OOM warning 5. The console output path calls netpoll_send_udp() 6. netpoll_send_udp() attempts to acquire the same skb_pool->lock 7. Deadlock: the lock is already held by the same CPU Call stack: refill_skbs() spin_lock_irqsave(&skb_pool->lock) <- lock acquired __alloc_skb() kmem_cache_alloc_node_noprof() slab_out_of_memory() printk() console_flush_all() netpoll_send_udp() skb_dequeue() spin_lock_irqsave(&skb_pool->lock) <- deadlock attempt This bug was exposed by commit 248f6571fd4c51 ("netpoll: Optimize skb refilling on critical path") which removed refill_skbs() from the critical path (where nested printk was being deferred), letting nested printk being called from inside refill_skbs() Refactor refill_skbs() to never allocate memory while holding the spinlock. Another possible solution to fix this problem is protecting the refill_skbs() from nested printks, basically calling printk_deferred_{enter,exit}() in refill_skbs(), then, any nested pr_warn() would be deferred. I prefer this approach, given I _think_ it might be a good idea to move the alloc_skb() from GFP_ATOMIC to GFP_KERNEL in the future, so, having the alloc_skb() outside of the lock will be necessary step. There is a possible TOCTOU issue when checking for the pool length, and queueing the new allocated skb, but, this is not an issue, given that an extra SKB in the pool is harmless and it will be eventually used. | ||||
| CVE-2025-40359 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix KASAN global-out-of-bounds warning When running "perf mem record" command on CWF, the below KASAN global-out-of-bounds warning is seen. ================================================================== BUG: KASAN: global-out-of-bounds in cmt_latency_data+0x176/0x1b0 Read of size 4 at addr ffffffffb721d000 by task dtlb/9850 Call Trace: kasan_report+0xb8/0xf0 cmt_latency_data+0x176/0x1b0 setup_arch_pebs_sample_data+0xf49/0x2560 intel_pmu_drain_arch_pebs+0x577/0xb00 handle_pmi_common+0x6c4/0xc80 The issue is caused by below code in __grt_latency_data(). The code tries to access x86_hybrid_pmu structure which doesn't exist on non-hybrid platform like CWF. WARN_ON_ONCE(hybrid_pmu(event->pmu)->pmu_type == hybrid_big) So add is_hybrid() check before calling this WARN_ON_ONCE to fix the global-out-of-bounds access issue. | ||||
| CVE-2025-40346 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arch_topology: Fix incorrect error check in topology_parse_cpu_capacity() Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity() which causes the code to proceed with NULL clock pointers. The current logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both valid pointers and NULL, leading to potential NULL pointer dereference in clk_get_rate(). Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns: "The error code within @ptr if it is an error pointer; 0 otherwise." This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed) when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be called when of_clk_get() returns NULL. Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid pointers, preventing potential NULL pointer dereference in clk_get_rate(). | ||||
| CVE-2025-40188 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pwm: berlin: Fix wrong register in suspend/resume The 'enable' register should be BERLIN_PWM_EN rather than BERLIN_PWM_ENABLE, otherwise, the driver accesses wrong address, there will be cpu exception then kernel panic during suspend/resume. | ||||
| CVE-2025-37186 | 2 Hp, Linux | 2 Aruba Virtual Intranet Access, Linux | 2026-04-15 | 7.8 High |
| A local privilege-escalation vulnerability has been discovered in the HPE Aruba Networking Virtual Intranet Access (VIA) client. Successful exploitation of this vulnerability could allow a local attacker to achieve arbitrary code execution with root privileges. | ||||
| CVE-2025-68233 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Add call to put_pid() Add a call to put_pid() corresponding to get_task_pid(). host1x_memory_context_alloc() does not take ownership of the PID so we need to free it here to avoid leaking. [mperttunen@nvidia.com: reword commit message] | ||||
| CVE-2025-40191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix kfd process ref leaking when userptr unmapping kfd_lookup_process_by_pid hold the kfd process reference to ensure it doesn't get destroyed while sending the segfault event to user space. Calling kfd_lookup_process_by_pid as function parameter leaks the kfd process refcount and miss the NULL pointer check if app process is already destroyed. | ||||
| CVE-2025-40193 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xtensa: simdisk: add input size check in proc_write_simdisk A malicious user could pass an arbitrarily bad value to memdup_user_nul(), potentially causing kernel crash. This follows the same pattern as commit ee76746387f6 ("netdevsim: prevent bad user input in nsim_dev_health_break_write()") | ||||