Export limit exceeded: 414399 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25995 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25995 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25995 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40185 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: ice_adapter: release xa entry on adapter allocation failure When ice_adapter_new() fails, the reserved XArray entry created by xa_insert() is not released. This causes subsequent insertions at the same index to return -EBUSY, potentially leading to NULL pointer dereferences. Reorder the operations as suggested by Przemek Kitszel: 1. Check if adapter already exists (xa_load) 2. Reserve the XArray slot (xa_reserve) 3. Allocate the adapter (ice_adapter_new) 4. Store the adapter (xa_store) | ||||
| CVE-2025-40109 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: rng - Ensure set_ent is always present Ensure that set_ent is always set since only drbg provides it. | ||||
| CVE-2025-40184 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix debug checking for np-guests using huge mappings When running with transparent huge pages and CONFIG_NVHE_EL2_DEBUG then the debug checking in assert_host_shared_guest() fails on the launch of an np-guest. This WARN_ON() causes a panic and generates the stack below. In __pkvm_host_relax_perms_guest() the debug checking assumes the mapping is a single page but it may be a block map. Update the checking so that the size is not checked and just assumes the correct size. While we're here make the same fix in __pkvm_host_mkyoung_guest(). Info: # lkvm run -k /share/arch/arm64/boot/Image -m 704 -c 8 --name guest-128 Info: Removed ghost socket file "/.lkvm//guest-128.sock". [ 1406.521757] kvm [141]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:1088! [ 1406.521804] kvm [141]: nVHE call trace: [ 1406.521828] kvm [141]: [<ffff8000811676b4>] __kvm_nvhe_hyp_panic+0xb4/0xe8 [ 1406.521946] kvm [141]: [<ffff80008116d12c>] __kvm_nvhe_assert_host_shared_guest+0xb0/0x10c [ 1406.522049] kvm [141]: [<ffff80008116f068>] __kvm_nvhe___pkvm_host_relax_perms_guest+0x48/0x104 [ 1406.522157] kvm [141]: [<ffff800081169df8>] __kvm_nvhe_handle___pkvm_host_relax_perms_guest+0x64/0x7c [ 1406.522250] kvm [141]: [<ffff800081169f0c>] __kvm_nvhe_handle_trap+0x8c/0x1a8 [ 1406.522333] kvm [141]: [<ffff8000811680fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4 [ 1406.522454] kvm [141]: ---[ end nVHE call trace ]--- [ 1406.522477] kvm [141]: Hyp Offset: 0xfffece8013600000 [ 1406.522554] Kernel panic - not syncing: HYP panic: [ 1406.522554] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800 [ 1406.522554] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000 [ 1406.522554] VCPU:0000000000000000 [ 1406.523337] CPU: 3 UID: 0 PID: 141 Comm: kvm-vcpu-0 Not tainted 6.16.0-rc7 #97 PREEMPT [ 1406.523485] Hardware name: FVP Base RevC (DT) [ 1406.523566] Call trace: [ 1406.523629] show_stack+0x18/0x24 (C) [ 1406.523753] dump_stack_lvl+0xd4/0x108 [ 1406.523899] dump_stack+0x18/0x24 [ 1406.524040] panic+0x3d8/0x448 [ 1406.524184] nvhe_hyp_panic_handler+0x10c/0x23c [ 1406.524325] kvm_handle_guest_abort+0x68c/0x109c [ 1406.524500] handle_exit+0x60/0x17c [ 1406.524630] kvm_arch_vcpu_ioctl_run+0x2e0/0x8c0 [ 1406.524794] kvm_vcpu_ioctl+0x1a8/0x9cc [ 1406.524919] __arm64_sys_ioctl+0xac/0x104 [ 1406.525067] invoke_syscall+0x48/0x10c [ 1406.525189] el0_svc_common.constprop.0+0x40/0xe0 [ 1406.525322] do_el0_svc+0x1c/0x28 [ 1406.525441] el0_svc+0x38/0x120 [ 1406.525588] el0t_64_sync_handler+0x10c/0x138 [ 1406.525750] el0t_64_sync+0x1ac/0x1b0 [ 1406.525876] SMP: stopping secondary CPUs [ 1406.525965] Kernel Offset: disabled [ 1406.526032] CPU features: 0x0000,00000080,8e134ca1,9446773f [ 1406.526130] Memory Limit: none [ 1406.959099] ---[ end Kernel panic - not syncing: HYP panic: [ 1406.959099] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800 [ 1406.959099] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000 [ 1406.959099] VCPU:0000000000000000 ] | ||||
| CVE-2025-40195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mount: handle NULL values in mnt_ns_release() When calling in listmount() mnt_ns_release() may be passed a NULL pointer. Handle that case gracefully. | ||||
| CVE-2025-40197 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mc: Clear minor number before put device The device minor should not be cleared after the device is released. | ||||
| CVE-2025-39995 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer. The following is the trace captured by KASAN. BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __pfx_sched_balance_find_src_group+0x10/0x10 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? tmigr_update_events+0x280/0x740 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x98/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_node_track_caller_noprof+0x198/0x430 devm_kmalloc+0x7b/0x1e0 tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 release_nodes+0xa4/0x100 devres_release_group+0x1b2/0x380 i2c_device_probe+0x694/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace timer_delete() with timer_delete_sync() and cancel_delayed_work() with cancel_delayed_work_sync() to ensure proper termination of timer and work items before resource cleanup. This bug was initially identified through static analysis. For reproduction and testing, I created a functional emulation of the tc358743 device via a kernel module and introduced faults through the debugfs interface. | ||||
| CVE-2025-40200 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: reject negative file sizes in squashfs_read_inode() Syskaller reports a "WARNING in ovl_copy_up_file" in overlayfs. This warning is ultimately caused because the underlying Squashfs file system returns a file with a negative file size. This commit checks for a negative file size and returns EINVAL. [phillip@squashfs.org.uk: only need to check 64 bit quantity] | ||||
| CVE-2025-68316 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix invalid probe error return value After DME Link Startup, the error return value is set to the MIPI UniPro GenericErrorCode which can be 0 (SUCCESS) or 1 (FAILURE). Upon failure during driver probe, the error code 1 is propagated back to the driver probe function which must return a negative value to indicate an error, but 1 is not negative, so the probe is considered to be successful even though it failed. Subsequently, removing the driver results in an oops because it is not in a valid state. This happens because none of the callers of ufshcd_init() expect a non-negative error code. Fix the return value and documentation to match actual usage. | ||||
| CVE-2025-40229 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix potential memory leak by cleaning ops_filter in damon_destroy_scheme Currently, damon_destroy_scheme() only cleans up the filter list but leaves ops_filter untouched, which could lead to memory leaks when a scheme is destroyed. This patch ensures both filter and ops_filter are properly freed in damon_destroy_scheme(), preventing potential memory leaks. | ||||
| CVE-2025-40207 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-subdev: Fix alloc failure check in v4l2_subdev_call_state_try() v4l2_subdev_call_state_try() macro allocates a subdev state with __v4l2_subdev_state_alloc(), but does not check the returned value. If __v4l2_subdev_state_alloc fails, it returns an ERR_PTR, and that would cause v4l2_subdev_call_state_try() to crash. Add proper error handling to v4l2_subdev_call_state_try(). | ||||
| CVE-2025-40210 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND" I've found that pynfs COMP6 now leaves the connection or lease in a strange state, which causes CLOSE9 to hang indefinitely. I've dug into it a little, but I haven't been able to root-cause it yet. However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"). Tianshuo Han also reports a potential vulnerability when decoding an NFSv4 COMPOUND. An attacker can place an arbitrarily large op count in the COMPOUND header, which results in: [ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0 when NFSD attempts to allocate the COMPOUND op array. Let's restore the operation-per-COMPOUND limit, but increased to 200 for now. | ||||
| CVE-2025-40108 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: Fix blocked task Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for serial driver") and its dependent commit 86fa39dd6fb7 ("serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the first one causes regression - hang task on Qualcomm RB1 board (QRB2210) and unable to use serial at all during normal boot: INFO: task kworker/u16:0:12 blocked for more than 42 seconds. Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010 Workqueue: async async_run_entry_fn Call trace: __switch_to+0xe8/0x1a0 (T) __schedule+0x290/0x7c0 schedule+0x34/0x118 rpm_resume+0x14c/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c __pm_runtime_resume+0x50/0x9c __driver_probe_device+0x58/0x120 driver_probe_device+0x3c/0x154 __driver_attach_async_helper+0x4c/0xc0 async_run_entry_fn+0x34/0xe0 process_one_work+0x148/0x290 worker_thread+0x2c4/0x3e0 kthread+0x118/0x1c0 ret_from_fork+0x10/0x20 The issue was reported on 12th of August and was ignored by author of commits introducing issue for two weeks. Only after complaining author produced a fix which did not work, so if original commits cannot be reliably fixed for 5 weeks, they obviously are buggy and need to be dropped. | ||||
| CVE-2025-68344 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: wavefront: Fix integer overflow in sample size validation The wavefront_send_sample() function has an integer overflow issue when validating sample size. The header->size field is u32 but gets cast to int for comparison with dev->freemem Fix by using unsigned comparison to avoid integer overflow. | ||||
| CVE-2025-68323 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: fix use-after-free caused by uec->work The delayed work uec->work is scheduled in gaokun_ucsi_probe() but never properly canceled in gaokun_ucsi_remove(). This creates use-after-free scenarios where the ucsi and gaokun_ucsi structure are freed after ucsi_destroy() completes execution, while the gaokun_ucsi_register_worker() might be either currently executing or still pending in the work queue. The already-freed gaokun_ucsi or ucsi structure may then be accessed. Furthermore, the race window is 3 seconds, which is sufficiently long to make this bug easily reproducible. The following is the trace captured by KASAN: ================================================================== BUG: KASAN: slab-use-after-free in __run_timers+0x5ec/0x630 Write of size 8 at addr ffff00000ec28cc8 by task swapper/0/0 ... Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x78/0x90 print_report+0x114/0x580 kasan_report+0xa4/0xf0 __asan_report_store8_noabort+0x20/0x2c __run_timers+0x5ec/0x630 run_timer_softirq+0xe8/0x1cc handle_softirqs+0x294/0x720 __do_softirq+0x14/0x20 ____do_softirq+0x10/0x1c call_on_irq_stack+0x30/0x48 do_softirq_own_stack+0x1c/0x28 __irq_exit_rcu+0x27c/0x364 irq_exit_rcu+0x10/0x1c el1_interrupt+0x40/0x60 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 arch_local_irq_enable+0x4/0x8 (P) do_idle+0x334/0x458 cpu_startup_entry+0x60/0x70 rest_init+0x158/0x174 start_kernel+0x2f8/0x394 __primary_switched+0x8c/0x94 Allocated by task 72 on cpu 0 at 27.510341s: kasan_save_stack+0x2c/0x54 kasan_save_track+0x24/0x5c kasan_save_alloc_info+0x40/0x54 __kasan_kmalloc+0xa0/0xb8 __kmalloc_node_track_caller_noprof+0x1c0/0x588 devm_kmalloc+0x7c/0x1c8 gaokun_ucsi_probe+0xa0/0x840 auxiliary_bus_probe+0x94/0xf8 really_probe+0x17c/0x5b8 __driver_probe_device+0x158/0x2c4 driver_probe_device+0x10c/0x264 __device_attach_driver+0x168/0x2d0 bus_for_each_drv+0x100/0x188 __device_attach+0x174/0x368 device_initial_probe+0x14/0x20 bus_probe_device+0x120/0x150 device_add+0xb3c/0x10fc __auxiliary_device_add+0x88/0x130 ... Freed by task 73 on cpu 1 at 28.910627s: kasan_save_stack+0x2c/0x54 kasan_save_track+0x24/0x5c __kasan_save_free_info+0x4c/0x74 __kasan_slab_free+0x60/0x8c kfree+0xd4/0x410 devres_release_all+0x140/0x1f0 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x344/0x460 device_release_driver+0x18/0x24 bus_remove_device+0x198/0x274 device_del+0x310/0xa84 ... The buggy address belongs to the object at ffff00000ec28c00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 200 bytes inside of freed 512-byte region The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ec28 head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff) page_type: f5(slab) raw: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000 head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 03fffe0000000002 fffffdffc03b0a01 00000000ffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff00000ec28b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff00000ec28c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff00000ec28c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff00000ec28d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff00000ec28d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================ ---truncated--- | ||||
| CVE-2025-39996 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove The original code uses cancel_delayed_work() in flexcop_pci_remove(), which does not guarantee that the delayed work item irq_check_work has fully completed if it was already running. This leads to use-after-free scenarios where flexcop_pci_remove() may free the flexcop_device while irq_check_work is still active and attempts to dereference the device. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) flexcop_pci_remove() | flexcop_pci_irq_check_work() cancel_delayed_work() | flexcop_device_kfree(fc_pci->fc_dev) | | fc = fc_pci->fc_dev; // UAF This is confirmed by a KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff8880093aa8c8 by task bash/135 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 run_timer_softirq+0xd1/0x190 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 1: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x1be/0x460 flexcop_device_kmalloc+0x54/0xe0 flexcop_pci_probe+0x1f/0x9d0 local_pci_probe+0xdc/0x190 pci_device_probe+0x2fe/0x470 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __driver_attach+0xd2/0x310 bus_for_each_dev+0xed/0x170 bus_add_driver+0x208/0x500 driver_register+0x132/0x460 do_one_initcall+0x89/0x300 kernel_init_freeable+0x40d/0x720 kernel_init+0x1a/0x150 ret_from_fork+0x10c/0x1a0 ret_from_fork_asm+0x1a/0x30 Freed by task 135: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 flexcop_device_kfree+0x32/0x50 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0xf8/0x210 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device_locked+0x15/0x30 remove_store+0xcc/0xe0 kernfs_fop_write_iter+0x2c3/0x440 vfs_write+0x871/0xd70 ksys_write+0xee/0x1c0 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work has finished before the device memory is deallocated. This bug was initially identified through static analysis. To reproduce and test it, I simulated the B2C2 FlexCop PCI device in QEMU and introduced artificial delays within the flexcop_pci_irq_check_work() function to increase the likelihood of triggering the bug. | ||||
| CVE-2025-40221 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: pci: mg4b: fix uninitialized iio scan data Fix potential leak of uninitialized stack data to userspace by ensuring that the `scan` structure is zeroed before use. | ||||
| CVE-2025-40222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: sh-sci: fix RSCI FIFO overrun handling The receive error handling code is shared between RSCI and all other SCIF port types, but the RSCI overrun_reg is specified as a memory offset, while for other SCIF types it is an enum value used to index into the sci_port_params->regs array, as mentioned above the sci_serial_in() function. For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call inside the sci_handle_fifo_overrun() function to index outside the bounds of the regs array, which currently has a size of 20, as specified by SCI_NR_REGS. Because of this, we end up accessing memory outside of RSCI's rsci_port_params structure, which, when interpreted as a plat_sci_reg, happens to have a non-zero size, causing the following WARN when sci_serial_in() is called, as the accidental size does not match the supported register sizes. The existence of the overrun_reg needs to be checked because SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not present in the regs array. Avoid calling sci_getreg() for port types which don't use standard register handling. Use the ops->read_reg() and ops->write_reg() functions to properly read and write registers for RSCI, and change the type of the status variable to accommodate the 32-bit CSR register. sci_getreg() and sci_serial_in() are also called with overrun_reg in the sci_mpxed_interrupt() interrupt handler, but that code path is not used for RSCI, as it does not have a muxed interrupt. ------------[ cut here ]------------ Invalid register access WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sci_serial_in+0x38/0xac lr : sci_serial_in+0x38/0xac sp : ffff800080003e80 x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80 x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000 x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48 x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48 x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80 Call trace: sci_serial_in+0x38/0xac (P) sci_handle_fifo_overrun.isra.0+0x70/0x134 sci_er_interrupt+0x50/0x39c __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x44/0xb0 handle_fasteoi_irq+0xf4/0x1a0 handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x140 call_on_irq_stack+0x30/0x48 do_interrupt_handler+0x80/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 default_idle_call+0x28/0x58 (P) do_idle+0x1f8/0x250 cpu_startup_entry+0x34/0x3c rest_init+0xd8/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-68325 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop In cake_drop(), qdisc_tree_reduce_backlog() is used to update the qlen and backlog of the qdisc hierarchy. Its caller, cake_enqueue(), assumes that the parent qdisc will enqueue the current packet. However, this assumption breaks when cake_enqueue() returns NET_XMIT_CN: the parent qdisc stops enqueuing current packet, leaving the tree qlen/backlog accounting inconsistent. This mismatch can lead to a NULL dereference (e.g., when the parent Qdisc is qfq_qdisc). This patch computes the qlen/backlog delta in a more robust way by observing the difference before and after the series of cake_drop() calls, and then compensates the qdisc tree accounting if cake_enqueue() returns NET_XMIT_CN. To ensure correct compensation when ACK thinning is enabled, a new variable is introduced to keep qlen unchanged. | ||||
| CVE-2025-40220 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix livelock in synchronous file put from fuseblk workers I observed a hang when running generic/323 against a fuseblk server. This test opens a file, initiates a lot of AIO writes to that file descriptor, and closes the file descriptor before the writes complete. Unsurprisingly, the AIO exerciser threads are mostly stuck waiting for responses from the fuseblk server: # cat /proc/372265/task/372313/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_do_getattr+0xfc/0x1f0 [fuse] [<0>] fuse_file_read_iter+0xbe/0x1c0 [fuse] [<0>] aio_read+0x130/0x1e0 [<0>] io_submit_one+0x542/0x860 [<0>] __x64_sys_io_submit+0x98/0x1a0 [<0>] do_syscall_64+0x37/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 But the /weird/ part is that the fuseblk server threads are waiting for responses from itself: # cat /proc/372210/task/372232/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_file_put+0x9a/0xd0 [fuse] [<0>] fuse_release+0x36/0x50 [fuse] [<0>] __fput+0xec/0x2b0 [<0>] task_work_run+0x55/0x90 [<0>] syscall_exit_to_user_mode+0xe9/0x100 [<0>] do_syscall_64+0x43/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 The fuseblk server is fuse2fs so there's nothing all that exciting in the server itself. So why is the fuse server calling fuse_file_put? The commit message for the fstest sheds some light on that: "By closing the file descriptor before calling io_destroy, you pretty much guarantee that the last put on the ioctx will be done in interrupt context (during I/O completion). Aha. AIO fgets a new struct file from the fd when it queues the ioctx. The completion of the FUSE_WRITE command from userspace causes the fuse server to call the AIO completion function. The completion puts the struct file, queuing a delayed fput to the fuse server task. When the fuse server task returns to userspace, it has to run the delayed fput, which in the case of a fuseblk server, it does synchronously. Sending the FUSE_RELEASE command sychronously from fuse server threads is a bad idea because a client program can initiate enough simultaneous AIOs such that all the fuse server threads end up in delayed_fput, and now there aren't any threads left to handle the queued fuse commands. Fix this by only using asynchronous fputs when closing files, and leave a comment explaining why. | ||||
| CVE-2025-23345 | 3 Linux, Microsoft, Nvidia | 3 Linux, Windows, Display Driver | 2026-04-15 | 4.4 Medium |
| NVIDIA Display Driver for Windows and Linux contains a vulnerability in a video decoder, where an attacker might cause an out-of-bounds read. A successful exploit of this vulnerability might lead to information disclosure or denial of service. | ||||