Export limit exceeded: 26033 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26033 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53834 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ina2xx: avoid NULL pointer dereference on OF device match The affected lines were resulting in a NULL pointer dereference on our platform because the device tree contained the following list of compatible strings: power-sensor@40 { compatible = "ti,ina232", "ti,ina231"; ... }; Since the driver doesn't declare a compatible string "ti,ina232", the OF matching succeeds on "ti,ina231". But the I2C device ID info is populated via the first compatible string, cf. modalias population in of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy I2C device ID table either, the struct i2c_device_id *id pointer in the probe function is NULL. Fix this by using the already populated type variable instead, which points to the proper driver data. Since the name is also wanted, add a generic one to the ina2xx_config table. | ||||
| CVE-2023-53833 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix NULL ptr deref by checking new_crtc_state intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't obtained previously with intel_atomic_get_crtc_state, so we must check it for NULLness here, just as in many other places, where we can't guarantee that intel_atomic_get_crtc_state was called. We are currently getting NULL ptr deref because of that, so this fix was confirmed to help. (cherry picked from commit 1d5b09f8daf859247a1ea65b0d732a24d88980d8) | ||||
| CVE-2023-53832 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix null-ptr-deref in raid10_sync_request init_resync() inits mempool and sets conf->have_replacemnt at the beginning of sync, close_sync() frees the mempool when sync is completed. After [1] recovery might be skipped and init_resync() is called but close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio. The following is one way to reproduce the issue. 1) create a array, wait for resync to complete, mddev->recovery_cp is set to MaxSector. 2) recovery is woken and it is skipped. conf->have_replacement is set to 0 in init_resync(). close_sync() not called. 3) some io errors and rdev A is set to WantReplacement. 4) a new device is added and set to A's replacement. 5) recovery is woken, A have replacement, but conf->have_replacemnt is 0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref occurs. Fix it by not calling init_resync() if recovery skipped. [1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled") | ||||
| CVE-2023-53831 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: read sk->sk_family once in sk_mc_loop() syzbot is playing with IPV6_ADDRFORM quite a lot these days, and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop() We have many more similar issues to fix. WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260 Modules linked in: CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Workqueue: events_power_efficient gc_worker RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782 Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48 RSP: 0018:ffffc90000388530 EFLAGS: 00010246 RAX: ffffffff846d9b55 RBX: 0000000000000011 RCX: ffff88814f884980 RDX: 0000000000000102 RSI: ffffffff87ae5160 RDI: 0000000000000011 RBP: ffffc90000388550 R08: 0000000000000003 R09: ffffffff846d9a65 R10: 0000000000000002 R11: ffff88814f884980 R12: dffffc0000000000 R13: ffff88810dbee000 R14: 0000000000000010 R15: ffff888150084000 FS: 0000000000000000(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 000000014ee5b000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> [<ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83 [<ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff852071cf>] dst_output include/net/dst.h:444 [inline] [<ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline] [<ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342 [<ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline] [<ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415 [<ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125 [<ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247 [<ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599 [<ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline] [<ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683 [<ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695 | ||||
| CVE-2023-53830 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Fix memory leak when showing current settings When retriving a item string with tlmi_setting(), the result has to be freed using kfree(). In current_value_show() however, malformed item strings are not freed, causing a memory leak. Fix this by eliminating the early return responsible for this. | ||||
| CVE-2023-53837 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: fix NULL-deref on snapshot tear down In case of early initialisation errors and on platforms that do not use the DPU controller, the deinitilisation code can be called with the kms pointer set to NULL. Patchwork: https://patchwork.freedesktop.org/patch/525099/ | ||||
| CVE-2022-50810 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: devices: fix missing put_device in mport_cdev_open When kfifo_alloc fails, the refcount of chdev->dev is left incremental. We should use put_device(&chdev->dev) to decrease the ref count of chdev->dev to avoid refcount leak. | ||||
| CVE-2022-50847 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: it6505: Initialize AUX channel in it6505_i2c_probe During device boot, the HPD interrupt could be triggered before the DRM subsystem registers it6505 as a DRM bridge. In such cases, the driver tries to access AUX channel and causes NULL pointer dereference. Initializing the AUX channel earlier to prevent such error. | ||||
| CVE-2023-53821 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_vti: fix slab-use-after-free in decode_session6 When ipv6_vti device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when ipv6_vti device sends IPv6 packets. The stack information is as follows: BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890 Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xd9/0x150 print_address_description.constprop.0+0x2c/0x3c0 kasan_report+0x11d/0x130 decode_session6+0x103f/0x1890 __xfrm_decode_session+0x54/0xb0 vti6_tnl_xmit+0x3e6/0x1ee0 dev_hard_start_xmit+0x187/0x700 sch_direct_xmit+0x1a3/0xc30 __qdisc_run+0x510/0x17a0 __dev_queue_xmit+0x2215/0x3b10 neigh_connected_output+0x3c2/0x550 ip6_finish_output2+0x55a/0x1550 ip6_finish_output+0x6b9/0x1270 ip6_output+0x1f1/0x540 ndisc_send_skb+0xa63/0x1890 ndisc_send_rs+0x132/0x6f0 addrconf_rs_timer+0x3f1/0x870 call_timer_fn+0x1a0/0x580 expire_timers+0x29b/0x4b0 run_timer_softirq+0x326/0x910 __do_softirq+0x1d4/0x905 irq_exit_rcu+0xb7/0x120 sysvec_apic_timer_interrupt+0x97/0xc0 </IRQ> Allocated by task 9176: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x7f/0x90 kmem_cache_alloc_node+0x1cd/0x410 kmalloc_reserve+0x165/0x270 __alloc_skb+0x129/0x330 netlink_sendmsg+0x9b1/0xe30 sock_sendmsg+0xde/0x190 ____sys_sendmsg+0x739/0x920 ___sys_sendmsg+0x110/0x1b0 __sys_sendmsg+0xf7/0x1c0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 9176: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2b/0x40 ____kasan_slab_free+0x160/0x1c0 slab_free_freelist_hook+0x11b/0x220 kmem_cache_free+0xf0/0x490 skb_free_head+0x17f/0x1b0 skb_release_data+0x59c/0x850 consume_skb+0xd2/0x170 netlink_unicast+0x54f/0x7f0 netlink_sendmsg+0x926/0xe30 sock_sendmsg+0xde/0x190 ____sys_sendmsg+0x739/0x920 ___sys_sendmsg+0x110/0x1b0 __sys_sendmsg+0xf7/0x1c0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff88802e08ed00 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 194 bytes inside of freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80) As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets. | ||||
| CVE-2023-53820 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: loop: loop_set_status_from_info() check before assignment In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should be checked before reassignment, because if an overflow error occurs, the original correct value will be changed to the wrong value, and it will not be changed back. More, the original patch did not solve the problem, the value was set and ioctl returned an error, but the subsequent io used the value in the loop driver, which still caused an alarm: loop_handle_cmd do_req_filebacked loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset; lo_rw_aio cmd->iocb.ki_pos = pos | ||||
| CVE-2023-53813 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix rbtree traversal bug in ext4_mb_use_preallocated During allocations, while looking for preallocations(PA) in the per inode rbtree, we can't do a direct traversal of the tree because ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted and that can cause direct traversal to skip some entries. This was leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy our request and ultimately tried to create a new PA that would overlap with the missed one. To makes sure we handle that case while still keeping the performance of the rbtree, we make use of the fact that the only pa that could possibly overlap the original goal start is the one that satisfies the below conditions: 1. It must have it's logical start immediately to the left of (ie less than) original logical start. 2. It must not be deleted To find this pa we use the following traversal method: 1. Descend into the rbtree normally to find the immediate neighboring PA. Here we keep descending irrespective of if the PA is deleted or if it overlaps with our request etc. The goal is to find an immediately adjacent PA. 2. If the found PA is on right of original goal, use rb_prev() to find the left adjacent PA. 3. Check if this PA is deleted and keep moving left with rb_prev() until a non deleted PA is found. 4. This is the PA we are looking for. Now we can check if it can satisfy the original request and proceed accordingly. This approach also takes care of having deleted PAs in the tree. (While we are at it, also fix a possible overflow bug in calculating the end of a PA) [1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/ | ||||
| CVE-2023-53812 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: fix decoder disable pm crash Can't call pm_runtime_disable when the architecture support sub device for 'dev->pm.dev' is NUll, or will get below crash log. [ 10.771551] pc : _raw_spin_lock_irq+0x4c/0xa0 [ 10.771556] lr : __pm_runtime_disable+0x30/0x130 [ 10.771558] sp : ffffffc01e4cb800 [ 10.771559] x29: ffffffc01e4cb800 x28: ffffffdf082108a8 [ 10.771563] x27: ffffffc01e4cbd70 x26: ffffff8605df55f0 [ 10.771567] x25: 0000000000000002 x24: 0000000000000002 [ 10.771570] x23: ffffff85c0dc9c00 x22: 0000000000000001 [ 10.771573] x21: 0000000000000001 x20: 0000000000000000 [ 10.771577] x19: 00000000000000f4 x18: ffffffdf2e9fbe18 [ 10.771580] x17: 0000000000000000 x16: ffffffdf2df13c74 [ 10.771583] x15: 00000000000002ea x14: 0000000000000058 [ 10.771587] x13: ffffffdf2de1b62c x12: ffffffdf2e9e30e4 [ 10.771590] x11: 0000000000000000 x10: 0000000000000001 [ 10.771593] x9 : 0000000000000000 x8 : 00000000000000f4 [ 10.771596] x7 : 6bff6264632c6264 x6 : 0000000000008000 [ 10.771600] x5 : 0080000000000000 x4 : 0000000000000001 [ 10.771603] x3 : 0000000000000008 x2 : 0000000000000001 [ 10.771608] x1 : 0000000000000000 x0 : 00000000000000f4 [ 10.771613] Call trace: [ 10.771617] _raw_spin_lock_irq+0x4c/0xa0 [ 10.771620] __pm_runtime_disable+0x30/0x130 [ 10.771657] mtk_vcodec_probe+0x69c/0x728 [mtk_vcodec_dec 800cc929d6631f79f9b273254c8db94d0d3500dc] [ 10.771662] platform_drv_probe+0x9c/0xbc [ 10.771665] really_probe+0x13c/0x3a0 [ 10.771668] driver_probe_device+0x84/0xc0 [ 10.771671] device_driver_attach+0x54/0x78 | ||||
| CVE-2023-53811 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Cap MSIX used to online CPUs + 1 The irdma driver can use a maximum number of msix vectors equal to num_online_cpus() + 1 and the kernel warning stack below is shown if that number is exceeded. The kernel throws a warning as the driver tries to update the affinity hint with a CPU mask greater than the max CPU IDs. Fix this by capping the MSIX vectors to num_online_cpus() + 1. WARNING: CPU: 7 PID: 23655 at include/linux/cpumask.h:106 irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma] RIP: 0010:irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma] Call Trace: irdma_rt_init_hw+0xa62/0x1290 [irdma] ? irdma_alloc_local_mac_entry+0x1a0/0x1a0 [irdma] ? __is_kernel_percpu_address+0x63/0x310 ? rcu_read_lock_held_common+0xe/0xb0 ? irdma_lan_unregister_qset+0x280/0x280 [irdma] ? irdma_request_reset+0x80/0x80 [irdma] ? ice_get_qos_params+0x84/0x390 [ice] irdma_probe+0xa40/0xfc0 [irdma] ? rcu_read_lock_bh_held+0xd0/0xd0 ? irdma_remove+0x140/0x140 [irdma] ? rcu_read_lock_sched_held+0x62/0xe0 ? down_write+0x187/0x3d0 ? auxiliary_match_id+0xf0/0x1a0 ? irdma_remove+0x140/0x140 [irdma] auxiliary_bus_probe+0xa6/0x100 __driver_probe_device+0x4a4/0xd50 ? __device_attach_driver+0x2c0/0x2c0 driver_probe_device+0x4a/0x110 __driver_attach+0x1aa/0x350 bus_for_each_dev+0x11d/0x1b0 ? subsys_dev_iter_init+0xe0/0xe0 bus_add_driver+0x3b1/0x610 driver_register+0x18e/0x410 ? 0xffffffffc0b88000 irdma_init_module+0x50/0xaa [irdma] do_one_initcall+0x103/0x5f0 ? perf_trace_initcall_level+0x420/0x420 ? do_init_module+0x4e/0x700 ? __kasan_kmalloc+0x7d/0xa0 ? kmem_cache_alloc_trace+0x188/0x2b0 ? kasan_unpoison+0x21/0x50 do_init_module+0x1d1/0x700 load_module+0x3867/0x5260 ? layout_and_allocate+0x3990/0x3990 ? rcu_read_lock_held_common+0xe/0xb0 ? rcu_read_lock_sched_held+0x62/0xe0 ? rcu_read_lock_bh_held+0xd0/0xd0 ? __vmalloc_node_range+0x46b/0x890 ? lock_release+0x5c8/0xba0 ? alloc_vm_area+0x120/0x120 ? selinux_kernel_module_from_file+0x2a5/0x300 ? __inode_security_revalidate+0xf0/0xf0 ? __do_sys_init_module+0x1db/0x260 __do_sys_init_module+0x1db/0x260 ? load_module+0x5260/0x5260 ? do_syscall_64+0x22/0x450 do_syscall_64+0xa5/0x450 entry_SYSCALL_64_after_hwframe+0x66/0xdb | ||||
| CVE-2022-50764 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6/sit: use DEV_STATS_INC() to avoid data-races syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. | ||||
| CVE-2023-53802 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function It is stated that ath9k_htc_rx_msg() either frees the provided skb or passes its management to another callback function. However, the skb is not freed in case there is no another callback function, and Syzkaller was able to cause a memory leak. Also minor comment fix. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2023-53801 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/sprd: Release dma buffer to avoid memory leak When attaching to a domain, the driver would alloc a DMA buffer which is used to store address mapping table, and it need to be released when the IOMMU domain is freed. | ||||
| CVE-2023-53799 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: api - Use work queue in crypto_destroy_instance The function crypto_drop_spawn expects to be called in process context. However, when an instance is unregistered while it still has active users, the last user may cause the instance to be freed in atomic context. Fix this by delaying the freeing to a work queue. | ||||
| CVE-2023-53791 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md: fix warning for holder mismatch from export_rdev() Commit a1d767191096 ("md: use mddev->external to select holder in export_rdev()") fix the problem that 'claim_rdev' is used for blkdev_get_by_dev() while 'rdev' is used for blkdev_put(). However, if mddev->external is changed from 0 to 1, then 'rdev' is used for blkdev_get_by_dev() while 'claim_rdev' is used for blkdev_put(). And this problem can be reporduced reliably by following: New file: mdadm/tests/23rdev-lifetime devname=${dev0##*/} devt=`cat /sys/block/$devname/dev` pid="" runtime=2 clean_up_test() { pill -9 $pid echo clear > /sys/block/md0/md/array_state } trap 'clean_up_test' EXIT add_by_sysfs() { while true; do echo $devt > /sys/block/md0/md/new_dev done } remove_by_sysfs(){ while true; do echo remove > /sys/block/md0/md/dev-${devname}/state done } echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed" add_by_sysfs & pid="$pid $!" remove_by_sysfs & pid="$pid $!" sleep $runtime exit 0 Test cmd: ./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime Test result: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 960 at block/bdev.c:618 blkdev_put+0x27c/0x330 Modules linked in: multipath md_mod loop CPU: 0 PID: 960 Comm: test Not tainted 6.5.0-rc2-00121-g01e55c376936-dirty #50 RIP: 0010:blkdev_put+0x27c/0x330 Call Trace: <TASK> export_rdev.isra.23+0x50/0xa0 [md_mod] mddev_unlock+0x19d/0x300 [md_mod] rdev_attr_store+0xec/0x190 [md_mod] sysfs_kf_write+0x52/0x70 kernfs_fop_write_iter+0x19a/0x2a0 vfs_write+0x3b5/0x770 ksys_write+0x74/0x150 __x64_sys_write+0x22/0x30 do_syscall_64+0x40/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix the problem by recording if 'rdev' is used as holder. | ||||
| CVE-2023-53789 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Improve page fault error reporting If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ #89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> [joro: Edit commit message] | ||||
| CVE-2022-50846 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path which will call mmc_free_host(). | ||||