Export limit exceeded: 25952 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25952 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-71195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix regmap max_register The max_register field is assigned the size of the register memory region instead of the offset of the last register. The result is that reading from the regmap via debugfs can cause a segmentation fault: tail /sys/kernel/debug/regmap/xdma.1.auto/registers Unable to handle kernel paging request at virtual address ffff800082f70000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault [...] Call trace: regmap_mmio_read32le+0x10/0x30 _regmap_bus_reg_read+0x74/0xc0 _regmap_read+0x68/0x198 regmap_read+0x54/0x88 regmap_read_debugfs+0x140/0x380 regmap_map_read_file+0x30/0x48 full_proxy_read+0x68/0xc8 vfs_read+0xcc/0x310 ksys_read+0x7c/0x120 __arm64_sys_read+0x24/0x40 invoke_syscall.constprop.0+0x64/0x108 do_el0_svc+0xb0/0xd8 el0_svc+0x38/0x130 el0t_64_sync_handler+0x120/0x138 el0t_64_sync+0x194/0x198 Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- note: tail[1217] exited with irqs disabled note: tail[1217] exited with preempt_count 1 Segmentation fault | ||||
| CVE-2025-71196 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: stm32-usphyc: Fix off by one in probe() The "index" variable is used as an index into the usbphyc->phys[] array which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys then it is one element out of bounds. The "index" comes from the device tree so it's data that we trust and it's unlikely to be wrong, however it's obviously still worth fixing the bug. Change the > to >=. | ||||
| CVE-2025-71198 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection The st_lsm6dsx_acc_channels array of struct iio_chan_spec has a non-NULL event_spec field, indicating support for IIO events. However, event detection is not supported for all sensors, and if userspace tries to configure accelerometer wakeup events on a sensor device that does not support them (e.g. LSM6DS0), st_lsm6dsx_write_event() dereferences a NULL pointer when trying to write to the wakeup register. Define an additional struct iio_chan_spec array whose members have a NULL event_spec field, and use this array instead of st_lsm6dsx_acc_channels for sensors without event detection capability. | ||||
| CVE-2025-40001 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mvsas: Fix use-after-free bugs in mvs_work_queue During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) mvs_pci_remove() | mvs_free() | mvs_work_queue() cancel_delayed_work() | kfree(mvi) | | mvi-> // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work item completes before the mvs_info is deallocated. This bug was found by static analysis. | ||||
| CVE-2025-39992 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: swap: check for stable address space before operating on the VMA It is possible to hit a zero entry while traversing the vmas in unuse_mm() called from swapoff path and accessing it causes the OOPS: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000446--> Loading the memory from offset 0x40 on the XA_ZERO_ENTRY as address. Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault The issue is manifested from the below race between the fork() on a process and swapoff: fork(dup_mmap()) swapoff(unuse_mm) --------------- ----------------- 1) Identical mtree is built using __mt_dup(). 2) copy_pte_range()--> copy_nonpresent_pte(): The dst mm is added into the mmlist to be visible to the swapoff operation. 3) Fatal signal is sent to the parent process(which is the current during the fork) thus skip the duplication of the vmas and mark the vma range with XA_ZERO_ENTRY as a marker for this process that helps during exit_mmap(). 4) swapoff is tried on the 'mm' added to the 'mmlist' as part of the 2. 5) unuse_mm(), that iterates through the vma's of this 'mm' will hit the non-NULL zero entry and operating on this zero entry as a vma is resulting into the oops. The proper fix would be around not exposing this partially-valid tree to others when droping the mmap lock, which is being solved with [1]. A simpler solution would be checking for MMF_UNSTABLE, as it is set if mm_struct is not fully initialized in dup_mmap(). Thanks to Liam/Lorenzo/David for all the suggestions in fixing this issue. | ||||
| CVE-2025-40030 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: check the return value of pinmux_ops::get_function_name() While the API contract in docs doesn't specify it explicitly, the generic implementation of the get_function_name() callback from struct pinmux_ops - pinmux_generic_get_function_name() - can fail and return NULL. This is already checked in pinmux_check_ops() so add a similar check in pinmux_func_name_to_selector() instead of passing the returned pointer right down to strcmp() where the NULL can get dereferenced. This is normal operation when adding new pinfunctions. | ||||
| CVE-2025-40032 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be NULL even after EPF initialization. Then it is prudent to check that they have non-NULL values before releasing the channels. Add the checks in pci_epf_test_clean_dma_chan(). Without the checks, NULL pointer dereferences happen and they can lead to a kernel panic in some cases: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Call trace: dma_release_channel+0x2c/0x120 (P) pci_epf_test_epc_deinit+0x94/0xc0 [pci_epf_test] pci_epc_deinit_notify+0x74/0xc0 tegra_pcie_ep_pex_rst_irq+0x250/0x5d8 irq_thread_fn+0x34/0xb8 irq_thread+0x18c/0x2e8 kthread+0x14c/0x210 ret_from_fork+0x10/0x20 [mani: trimmed the stack trace] | ||||
| CVE-2025-40034 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI/AER: Avoid NULL pointer dereference in aer_ratelimit() When platform firmware supplies error information to the OS, e.g., via the ACPI APEI GHES mechanism, it may identify an error source device that doesn't advertise an AER Capability and therefore dev->aer_info, which contains AER stats and ratelimiting data, is NULL. pci_dev_aer_stats_incr() already checks dev->aer_info for NULL, but aer_ratelimit() did not, leading to NULL pointer dereferences like this one from the URL below: {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 {1}[Hardware Error]: event severity: corrected {1}[Hardware Error]: device_id: 0000:00:00.0 {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2020 {1}[Hardware Error]: aer_cor_status: 0x00001000, aer_cor_mask: 0x00002000 BUG: kernel NULL pointer dereference, address: 0000000000000264 RIP: 0010:___ratelimit+0xc/0x1b0 pci_print_aer+0x141/0x360 aer_recover_work_func+0xb5/0x130 [8086:2020] is an Intel "Sky Lake-E DMI3 Registers" device that claims to be a Root Port but does not advertise an AER Capability. Add a NULL check in aer_ratelimit() to avoid the NULL pointer dereference. Note that this also prevents ratelimiting these events from GHES. [bhelgaas: add crash details to commit log] | ||||
| CVE-2025-40036 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix possible map leak in fastrpc_put_args copy_to_user() failure would cause an early return without cleaning up the fdlist, which has been updated by the DSP. This could lead to map leak. Fix this by redirecting to a cleanup path on failure, ensuring that all mapped buffers are properly released before returning. | ||||
| CVE-2025-40050 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer In check_alu_op(), the verifier currently calls check_reg_arg() and adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations. However, if the destination register holds a pointer, these scalar adjustments are unnecessary and potentially incorrect. This patch adds a check to skip the adjustment logic when the destination register contains a pointer. | ||||
| CVE-2025-40055 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix double free in user_cluster_connect() user_cluster_disconnect() frees "conn->cc_private" which is "lc" but then the error handling frees "lc" a second time. Set "lc" to NULL on this path to avoid a double free. | ||||
| CVE-2025-40060 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: coresight: trbe: Return NULL pointer for allocation failures When the TRBE driver fails to allocate a buffer, it currently returns the error code "-ENOMEM". However, the caller etm_setup_aux() only checks for a NULL pointer, so it misses the error. As a result, the driver continues and eventually causes a kernel panic. Fix this by returning a NULL pointer from arm_trbe_alloc_buffer() on allocation failures. This allows that the callers can properly handle the failure. | ||||
| CVE-2025-40062 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs When the initialization of qm->debug.acc_diff_reg fails, the probe process does not exit. However, after qm->debug.qm_diff_regs is freed, it is not set to NULL. This can lead to a double free when the remove process attempts to free it again. Therefore, qm->debug.qm_diff_regs should be set to NULL after it is freed. | ||||
| CVE-2025-40076 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq() Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because the object of type struct irq_domain_info passed to: msi_create_parent_irq_domain() -> irq_domain_instantiate()() -> __irq_domain_instantiate() has no reference to the parent IRQ domain. Using msi->domain->parent as an argument for generic_handle_domain_irq() leads to below error: "Unable to handle kernel NULL pointer dereference at virtual address" This error was identified while switching the upcoming RZ/G3S PCIe host controller driver to msi_create_parent_irq_domain() (which was using a similar pattern to handle MSIs (see link section)), but it was not tested on hardware using the pcie-rcar-host controller driver due to lack of hardware. [mani: reworded subject and description] | ||||
| CVE-2025-40089 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Add check for no entries in cxl_feature_info cxl EDAC calls cxl_feature_info() to get the feature information and if the hardware has no Features support, cxlfs may be passed in as NULL. [ 51.957498] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 51.965571] #PF: supervisor read access in kernel mode [ 51.971559] #PF: error_code(0x0000) - not-present page [ 51.977542] PGD 17e4f6067 P4D 0 [ 51.981384] Oops: Oops: 0000 [#1] SMP NOPTI [ 51.986300] CPU: 49 UID: 0 PID: 3782 Comm: systemd-udevd Not tainted 6.17.0dj test+ #64 PREEMPT(voluntary) [ 51.997355] Hardware name: <removed> [ 52.009790] RIP: 0010:cxl_feature_info+0xa/0x80 [cxl_core] Add a check for cxlfs before dereferencing it and return -EOPNOTSUPP if there is no cxlfs created due to no hardware support. | ||||
| CVE-2025-40107 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled This issue is similar to the vulnerability in the `mcp251x` driver, which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from sleep before interface was brought up"). In the `hi311x` driver, when the device resumes from sleep, the driver schedules `priv->restart_work`. However, if the network interface was not previously enabled, the `priv->wq` (workqueue) is not allocated and initialized, leading to a null pointer dereference. To fix this, we move the allocation and initialization of the workqueue from the `hi3110_open` function to the `hi3110_can_probe` function. This ensures that the workqueue is properly initialized before it is used during device resume. And added logic to destroy the workqueue in the error handling paths of `hi3110_can_probe` and in the `hi3110_can_remove` function to prevent resource leaks. | ||||
| CVE-2025-40120 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock Prevent USB runtime PM (autosuspend) for AX88772* in bind. usbnet enables runtime PM (autosuspend) by default, so disabling it via the usb_driver flag is ineffective. On AX88772B, autosuspend shows no measurable power saving with current driver (no link partner, admin up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering the PHY off on admin-down, not from USB autosuspend. The real hazard is that with runtime PM enabled, ndo_open() (under RTNL) may synchronously trigger autoresume (usb_autopm_get_interface()) into asix_resume() while the USB PM lock is held. Resume paths then invoke phylink/phylib and MDIO, which also expect RTNL, leading to possible deadlocks or PM lock vs MDIO wake issues. To avoid this, keep the device runtime-PM active by taking a usage reference in ax88772_bind() and dropping it in unbind(). A non-zero PM usage count blocks runtime suspend regardless of userspace policy (.../power/control - pm_runtime_allow/forbid), making this approach robust against sysfs overrides. Holding a runtime-PM usage ref does not affect system-wide suspend; system sleep/resume callbacks continue to run as before. | ||||
| CVE-2025-40125 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx In __blk_mq_update_nr_hw_queues() the return value of blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx fails, later changing the number of hw_queues or removing disk will trigger the following warning: kernfs: can not remove 'nr_tags', no directory WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160 Call Trace: remove_files.isra.1+0x38/0xb0 sysfs_remove_group+0x4d/0x100 sysfs_remove_groups+0x31/0x60 __kobject_del+0x23/0xf0 kobject_del+0x17/0x40 blk_mq_unregister_hctx+0x5d/0x80 blk_mq_sysfs_unregister_hctxs+0x94/0xd0 blk_mq_update_nr_hw_queues+0x124/0x760 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x92/0x120 [null_blk] kobjct_del() was called unconditionally even if sysfs creation failed. Fix it by checkig the kobject creation statusbefore deleting it. | ||||
| CVE-2025-40134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix NULL pointer dereference in __dm_suspend() There is a race condition between dm device suspend and table load that can lead to null pointer dereference. The issue occurs when suspend is invoked before table load completes: BUG: kernel NULL pointer dereference, address: 0000000000000054 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50 Call Trace: <TASK> blk_mq_quiesce_queue+0x2c/0x50 dm_stop_queue+0xd/0x20 __dm_suspend+0x130/0x330 dm_suspend+0x11a/0x180 dev_suspend+0x27e/0x560 ctl_ioctl+0x4cf/0x850 dm_ctl_ioctl+0xd/0x20 vfs_ioctl+0x1d/0x50 __se_sys_ioctl+0x9b/0xc0 __x64_sys_ioctl+0x19/0x30 x64_sys_call+0x2c4a/0x4620 do_syscall_64+0x9e/0x1b0 The issue can be triggered as below: T1 T2 dm_suspend table_load __dm_suspend dm_setup_md_queue dm_mq_init_request_queue blk_mq_init_allocated_queue => q->mq_ops = set->ops; (1) dm_stop_queue / dm_wait_for_completion => q->tag_set NULL pointer! (2) => q->tag_set = set; (3) Fix this by checking if a valid table (map) exists before performing request-based suspend and waiting for target I/O. When map is NULL, skip these table-dependent suspend steps. Even when map is NULL, no I/O can reach any target because there is no table loaded; I/O submitted in this state will fail early in the DM layer. Skipping the table-dependent suspend logic in this case is safe and avoids NULL pointer dereferences. | ||||
| CVE-2025-40137 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate first page in error path of f2fs_truncate() syzbot reports a bug as below: loop0: detected capacity change from 0 to 40427 F2FS-fs (loop0): Wrong SSA boundary, start(3584) end(4096) blocks(3072) F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (loop0): invalid crc value F2FS-fs (loop0): f2fs_convert_inline_folio: corrupted inline inode ino=3, i_addr[0]:0x1601, run fsck to fix. ------------[ cut here ]------------ kernel BUG at fs/inode.c:753! RIP: 0010:clear_inode+0x169/0x190 fs/inode.c:753 Call Trace: <TASK> evict+0x504/0x9c0 fs/inode.c:810 f2fs_fill_super+0x5612/0x6fa0 fs/f2fs/super.c:5047 get_tree_bdev_flags+0x40e/0x4d0 fs/super.c:1692 vfs_get_tree+0x8f/0x2b0 fs/super.c:1815 do_new_mount+0x2a2/0x9e0 fs/namespace.c:3808 do_mount fs/namespace.c:4136 [inline] __do_sys_mount fs/namespace.c:4347 [inline] __se_sys_mount+0x317/0x410 fs/namespace.c:4324 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f During f2fs_evict_inode(), clear_inode() detects that we missed to truncate all page cache before destorying inode, that is because in below path, we will create page #0 in cache, but missed to drop it in error path, let's fix it. - evict - f2fs_evict_inode - f2fs_truncate - f2fs_convert_inline_inode - f2fs_grab_cache_folio : create page #0 in cache - f2fs_convert_inline_folio : sanity check failed, return -EFSCORRUPTED - clear_inode detects that inode->i_data.nrpages is not zero | ||||