Export limit exceeded: 26045 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 415092 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25952 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25952 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-22995 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: fix use-after-free in ublk_partition_scan_work A race condition exists between the async partition scan work and device teardown that can lead to a use-after-free of ub->ub_disk: 1. ublk_ctrl_start_dev() schedules partition_scan_work after add_disk() 2. ublk_stop_dev() calls ublk_stop_dev_unlocked() which does: - del_gendisk(ub->ub_disk) - ublk_detach_disk() sets ub->ub_disk = NULL - put_disk() which may free the disk 3. The worker ublk_partition_scan_work() then dereferences ub->ub_disk leading to UAF Fix this by using ublk_get_disk()/ublk_put_disk() in the worker to hold a reference to the disk during the partition scan. The spinlock in ublk_get_disk() synchronizes with ublk_detach_disk() ensuring the worker either gets a valid reference or sees NULL and exits early. Also change flush_work() to cancel_work_sync() to avoid running the partition scan work unnecessarily when the disk is already detached. | ||||
| CVE-2026-23002 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: lib/buildid: use __kernel_read() for sleepable context Prevent a "BUG: unable to handle kernel NULL pointer dereference in filemap_read_folio". For the sleepable context, convert freader to use __kernel_read() instead of direct page cache access via read_cache_folio(). This simplifies the faultable code path by using the standard kernel file reading interface which handles all the complexity of reading file data. At the moment we are not changing the code for non-sleepable context which uses filemap_get_folio() and only succeeds if the target folios are already in memory and up-to-date. The reason is to keep the patch simple and easier to backport to stable kernels. Syzbot repro does not crash the kernel anymore and the selftests run successfully. In the follow up we will make __kernel_read() with IOCB_NOWAIT work for non-sleepable contexts. In addition, I would like to replace the secretmem check with a more generic approach and will add fstest for the buildid code. | ||||
| CVE-2026-23006 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tlv320adcx140: fix null pointer The "snd_soc_component" in "adcx140_priv" was only used once but never set. It was only used for reaching "dev" which is already present in "adcx140_priv". | ||||
| CVE-2026-23009 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xhci: sideband: don't dereference freed ring when removing sideband endpoint xhci_sideband_remove_endpoint() incorrecly assumes that the endpoint is running and has a valid transfer ring. Lianqin reported a crash during suspend/wake-up stress testing, and found the cause to be dereferencing a non-existing transfer ring 'ep->ring' during xhci_sideband_remove_endpoint(). The endpoint and its ring may be in unknown state if this function is called after xHCI was reinitialized in resume (lost power), or if device is being re-enumerated, disconnected or endpoint already dropped. Fix this by both removing unnecessary ring access, and by checking ep->ring exists before dereferencing it. Also make sure endpoint is running before attempting to stop it. Remove the xhci_initialize_ring_info() call during sideband endpoint removal as is it only initializes ring structure enqueue, dequeue and cycle state values to their starting values without changing actual hardware enqueue, dequeue and cycle state. Leaving them out of sync is worse than leaving it as it is. The endpoint will get freed in after this in most usecases. If the (audio) class driver want's to reuse the endpoint after offload then it is up to the class driver to ensure endpoint is properly set up. | ||||
| CVE-2026-23015 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mpsse: fix reference leak in gpio_mpsse_probe() error paths The reference obtained by calling usb_get_dev() is not released in the gpio_mpsse_probe() error paths. Fix that by using device managed helper functions. Also remove the usb_put_dev() call in the disconnect function since now it will be released automatically. | ||||
| CVE-2026-23020 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: 3com: 3c59x: fix possible null dereference in vortex_probe1() pdev can be null and free_ring: can be called in 1297 with a null pdev. | ||||
| CVE-2026-23022 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix memory leak in idpf_vc_core_deinit() Make sure to free hw->lan_regs. Reported by kmemleak during reset: unreferenced object 0xff1b913d02a936c0 (size 96): comm "kworker/u258:14", pid 2174, jiffies 4294958305 hex dump (first 32 bytes): 00 00 00 c0 a8 ba 2d ff 00 00 00 00 00 00 00 00 ......-......... 00 00 40 08 00 00 00 00 00 00 25 b3 a8 ba 2d ff ..@.......%...-. backtrace (crc 36063c4f): __kmalloc_noprof+0x48f/0x890 idpf_vc_core_init+0x6ce/0x9b0 [idpf] idpf_vc_event_task+0x1fb/0x350 [idpf] process_one_work+0x226/0x6d0 worker_thread+0x19e/0x340 kthread+0x10f/0x250 ret_from_fork+0x251/0x2b0 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-23043 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix NULL pointer dereference in do_abort_log_replay() Coverity reported a NULL pointer dereference issue (CID 1666756) in do_abort_log_replay(). When btrfs_alloc_path() fails in replay_one_buffer(), wc->subvol_path is NULL, but btrfs_abort_log_replay() calls do_abort_log_replay() which unconditionally dereferences wc->subvol_path when attempting to print debug information. Fix this by adding a NULL check before dereferencing wc->subvol_path in do_abort_log_replay(). | ||||
| CVE-2026-23044 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PM: hibernate: Fix crash when freeing invalid crypto compressor When crypto_alloc_acomp() fails, it returns an ERR_PTR value, not NULL. The cleanup code in save_compressed_image() and load_compressed_image() unconditionally calls crypto_free_acomp() without checking for ERR_PTR, which causes crypto_acomp_tfm() to dereference an invalid pointer and crash the kernel. This can be triggered when the compression algorithm is unavailable (e.g., CONFIG_CRYPTO_LZO not enabled). Fix by adding IS_ERR_OR_NULL() checks before calling crypto_free_acomp() and acomp_request_free(), similar to the existing kthread_stop() check. [ rjw: Added 2 empty code lines ] | ||||
| CVE-2026-23046 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix device mismatch in devm_kzalloc/devm_kfree Initial rss_hdr allocation uses virtio_device->device, but virtnet_set_queues() frees using net_device->device. This device mismatch causing below devres warning [ 3788.514041] ------------[ cut here ]------------ [ 3788.514044] WARNING: drivers/base/devres.c:1095 at devm_kfree+0x84/0x98, CPU#16: vdpa/1463 [ 3788.514054] Modules linked in: octep_vdpa virtio_net virtio_vdpa [last unloaded: virtio_vdpa] [ 3788.514064] CPU: 16 UID: 0 PID: 1463 Comm: vdpa Tainted: G W 6.18.0 #10 PREEMPT [ 3788.514067] Tainted: [W]=WARN [ 3788.514069] Hardware name: Marvell CN106XX board (DT) [ 3788.514071] pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) [ 3788.514074] pc : devm_kfree+0x84/0x98 [ 3788.514076] lr : devm_kfree+0x54/0x98 [ 3788.514079] sp : ffff800084e2f220 [ 3788.514080] x29: ffff800084e2f220 x28: ffff0003b2366000 x27: 000000000000003f [ 3788.514085] x26: 000000000000003f x25: ffff000106f17c10 x24: 0000000000000080 [ 3788.514089] x23: ffff00045bb8ab08 x22: ffff00045bb8a000 x21: 0000000000000018 [ 3788.514093] x20: ffff0004355c3080 x19: ffff00045bb8aa00 x18: 0000000000080000 [ 3788.514098] x17: 0000000000000040 x16: 000000000000001f x15: 000000000007ffff [ 3788.514102] x14: 0000000000000488 x13: 0000000000000005 x12: 00000000000fffff [ 3788.514106] x11: ffffffffffffffff x10: 0000000000000005 x9 : ffff800080c8c05c [ 3788.514110] x8 : ffff800084e2eeb8 x7 : 0000000000000000 x6 : 000000000000003f [ 3788.514115] x5 : ffff8000831bafe0 x4 : ffff800080c8b010 x3 : ffff0004355c3080 [ 3788.514119] x2 : ffff0004355c3080 x1 : 0000000000000000 x0 : 0000000000000000 [ 3788.514123] Call trace: [ 3788.514125] devm_kfree+0x84/0x98 (P) [ 3788.514129] virtnet_set_queues+0x134/0x2e8 [virtio_net] [ 3788.514135] virtnet_probe+0x9c0/0xe00 [virtio_net] [ 3788.514139] virtio_dev_probe+0x1e0/0x338 [ 3788.514144] really_probe+0xc8/0x3a0 [ 3788.514149] __driver_probe_device+0x84/0x170 [ 3788.514152] driver_probe_device+0x44/0x120 [ 3788.514155] __device_attach_driver+0xc4/0x168 [ 3788.514158] bus_for_each_drv+0x8c/0xf0 [ 3788.514161] __device_attach+0xa4/0x1c0 [ 3788.514164] device_initial_probe+0x1c/0x30 [ 3788.514168] bus_probe_device+0xb4/0xc0 [ 3788.514170] device_add+0x614/0x828 [ 3788.514173] register_virtio_device+0x214/0x258 [ 3788.514175] virtio_vdpa_probe+0xa0/0x110 [virtio_vdpa] [ 3788.514179] vdpa_dev_probe+0xa8/0xd8 [ 3788.514183] really_probe+0xc8/0x3a0 [ 3788.514186] __driver_probe_device+0x84/0x170 [ 3788.514189] driver_probe_device+0x44/0x120 [ 3788.514192] __device_attach_driver+0xc4/0x168 [ 3788.514195] bus_for_each_drv+0x8c/0xf0 [ 3788.514197] __device_attach+0xa4/0x1c0 [ 3788.514200] device_initial_probe+0x1c/0x30 [ 3788.514203] bus_probe_device+0xb4/0xc0 [ 3788.514206] device_add+0x614/0x828 [ 3788.514209] _vdpa_register_device+0x58/0x88 [ 3788.514211] octep_vdpa_dev_add+0x104/0x228 [octep_vdpa] [ 3788.514215] vdpa_nl_cmd_dev_add_set_doit+0x2d0/0x3c0 [ 3788.514218] genl_family_rcv_msg_doit+0xe4/0x158 [ 3788.514222] genl_rcv_msg+0x218/0x298 [ 3788.514225] netlink_rcv_skb+0x64/0x138 [ 3788.514229] genl_rcv+0x40/0x60 [ 3788.514233] netlink_unicast+0x32c/0x3b0 [ 3788.514237] netlink_sendmsg+0x170/0x3b8 [ 3788.514241] __sys_sendto+0x12c/0x1c0 [ 3788.514246] __arm64_sys_sendto+0x30/0x48 [ 3788.514249] invoke_syscall.constprop.0+0x58/0xf8 [ 3788.514255] do_el0_svc+0x48/0xd0 [ 3788.514259] el0_svc+0x48/0x210 [ 3788.514264] el0t_64_sync_handler+0xa0/0xe8 [ 3788.514268] el0t_64_sync+0x198/0x1a0 [ 3788.514271] ---[ end trace 0000000000000000 ]--- Fix by using virtio_device->device consistently for allocation and deallocation | ||||
| CVE-2026-23047 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: make calc_target() set t->paused, not just clear it Currently calc_target() clears t->paused if the request shouldn't be paused anymore, but doesn't ever set t->paused even though it's able to determine when the request should be paused. Setting t->paused is left to __submit_request() which is fine for regular requests but doesn't work for linger requests -- since __submit_request() doesn't operate on linger requests, there is nowhere for lreq->t.paused to be set. One consequence of this is that watches don't get reestablished on paused -> unpaused transitions in cases where requests have been paused long enough for the (paused) unwatch request to time out and for the subsequent (re)watch request to enter the paused state. On top of the watch not getting reestablished, rbd_reregister_watch() gets stuck with rbd_dev->watch_mutex held: rbd_register_watch __rbd_register_watch ceph_osdc_watch linger_reg_commit_wait It's waiting for lreq->reg_commit_wait to be completed, but for that to happen the respective request needs to end up on need_resend_linger list and be kicked when requests are unpaused. There is no chance for that if the request in question is never marked paused in the first place. The fact that rbd_dev->watch_mutex remains taken out forever then prevents the image from getting unmapped -- "rbd unmap" would inevitably hang in D state on an attempt to grab the mutex. | ||||
| CVE-2026-23049 | 1 Linux | 1 Linux Kernel | 2026-04-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panel-simple: fix connector type for DataImage SCF0700C48GGU18 panel The connector type for the DataImage SCF0700C48GGU18 panel is missing and devm_drm_panel_bridge_add() requires connector type to be set. This leads to a warning and a backtrace in the kernel log and panel does not work: " WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8 " The warning is triggered by a check for valid connector type in devm_drm_panel_bridge_add(). If there is no valid connector type set for a panel, the warning is printed and panel is not added. Fill in the missing connector type to fix the warning and make the panel operational once again. | ||||
| CVE-2026-23051 | 1 Linux | 1 Linux Kernel | 2026-04-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix drm panic null pointer when driver not support atomic When driver not support atomic, fb using plane->fb rather than plane->state->fb. (cherry picked from commit 2f2a72de673513247cd6fae14e53f6c40c5841ef) | ||||
| CVE-2026-23056 | 1 Linux | 1 Linux Kernel | 2026-04-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: uacce: implement mremap in uacce_vm_ops to return -EPERM The current uacce_vm_ops does not support the mremap operation of vm_operations_struct. Implement .mremap to return -EPERM to remind users. The reason we need to explicitly disable mremap is that when the driver does not implement .mremap, it uses the default mremap method. This could lead to a risk scenario: An application might first mmap address p1, then mremap to p2, followed by munmap(p1), and finally munmap(p2). Since the default mremap copies the original vma's vm_private_data (i.e., q) to the new vma, both munmap operations would trigger vma_close, causing q->qfr to be freed twice(qfr will be set to null here, so repeated release is ok). | ||||
| CVE-2026-23063 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: uacce: ensure safe queue release with state management Directly calling `put_queue` carries risks since it cannot guarantee that resources of `uacce_queue` have been fully released beforehand. So adding a `stop_queue` operation for the UACCE_CMD_PUT_Q command and leaving the `put_queue` operation to the final resource release ensures safety. Queue states are defined as follows: - UACCE_Q_ZOMBIE: Initial state - UACCE_Q_INIT: After opening `uacce` - UACCE_Q_STARTED: After `start` is issued via `ioctl` When executing `poweroff -f` in virt while accelerator are still working, `uacce_fops_release` and `uacce_remove` may execute concurrently. This can cause `uacce_put_queue` within `uacce_fops_release` to access a NULL `ops` pointer. Therefore, add state checks to prevent accessing freed pointers. | ||||
| CVE-2026-23068 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-sprd-adi: Fix double free in probe error path The driver currently uses spi_alloc_host() to allocate the controller but registers it using devm_spi_register_controller(). If devm_register_restart_handler() fails, the code jumps to the put_ctlr label and calls spi_controller_put(). However, since the controller was registered via a devm function, the device core will automatically call spi_controller_put() again when the probe fails. This results in a double-free of the spi_controller structure. Fix this by switching to devm_spi_alloc_host() and removing the manual spi_controller_put() call. | ||||
| CVE-2026-23080 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback mcba_usb_read_bulk_callback(), the URBs are processed and resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor. | ||||
| CVE-2026-23093 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbd: fix dma_unmap_sg() nents The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned. | ||||
| CVE-2026-23094 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: uacce: fix isolate sysfs check condition uacce supports the device isolation feature. If the driver implements the isolate_err_threshold_read and isolate_err_threshold_write callback functions, uacce will create sysfs files now. Users can read and configure the isolation policy through sysfs. Currently, sysfs files are created as long as either isolate_err_threshold_read or isolate_err_threshold_write callback functions are present. However, accessing a non-existent callback function may cause the system to crash. Therefore, intercept the creation of sysfs if neither read nor write exists; create sysfs if either is supported, but intercept unsupported operations at the call site. | ||||
| CVE-2026-2317 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-18 | 6.5 Medium |
| Inappropriate implementation in Animation in Google Chrome prior to 145.0.7632.45 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) | ||||