Export limit exceeded: 419424 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 419424 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 108594 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (108594 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90103 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix LAYOUTSTATS send buffer exhaustion encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE), i.e. 256 bytes, for the layoutupdate4 body written by the layout driver. The flexfiles record can exceed that. ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4, an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4 and the bool add a further 144, so the body passes 256 bytes before the netaddr4 is encoded at all. encode_layoutstats() additionally writes the deviceid4 and the layoutupdate4 lou_type word, neither of which the macro accounts for. The filehandle and the address are both chosen by the server, through LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the end of the send buffer. xdr_reserve_space() returns NULL once that happens, and the two ff_layout_encode_io_latency() calls run with dss_info->mirror->lock held, so a NULL return there leaves the lock permanently held. Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the reservation. | ||||
| CVE-2026-90143 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: kcm: Hold RCU read lock while running BPF parser kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which prevents CPU migration, but does not establish an RCU read-side critical section. Consequently, BPF map operations can trigger WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser program. Hold the RCU read lock while running the program. | ||||
| CVE-2026-90309 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold CQ references when processing EQ events EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or error callbacks outside the xarray lock. erdma_destroy_cq() can erase the CQ from the xarray and free its queue buffer and doorbell record while a previously scheduled EQ handler is still using the CQ. Add a CQ refcount and take a reference under the xarray lock with refcount_inc_not_zero(). Remove the CQ from the xarray before dropping the destroy-path reference, then wait for in-flight EQ users before releasing CQ resources. | ||||
| CVE-2026-90120 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Check get_logical_index() return value in MADT IAFFID parsing In gic_acpi_parse_iaffid() a given MADT GICC entry might not correspond to a logical cpu recognized by the kernel, resulting in the cpu variable initialization to an error value. Currently, the get_logical_index() return value is not checked for failure, which might result in out-of-bounds memory corruption while trying to index a per_cpu variable array. Add a check to evaluate get_logical_index() return value. | ||||
| CVE-2026-90379 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash When an AER error occurs and the bus is hung, the register reads return 0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in an invalid memory access when accessing q->desc[] or q->entry[]. Unable to handle kernel paging request at virtual address ffffffc01099eac0 pc : mt76_dma_add_buf+0x124/0x188 [mt76] lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76] sp : ffffffc016d9bbf0 x29: ffffffc016d9bc10 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffb7855e50b8 x25: ffffffb80d04f000 x24: 0000000000000000 x23: 0000000000000ec0 x22: ffffffb796803648 x21: ffffffb796801f80 x20: ffffffb7968035f8 x19: 0000000000000ec0 x18: 0000000000000000 x17: 000000004ec00000 x16: 000000000ec00000 x15: ffffffc01099eac0 x14: 000000004ec00000 x13: 00000000ffc5a000 x12: ffffffc016d9bc32 x11: 00000000ffffffff x10: 0000000000000002 x9 : 0000000000000000 x8 : 000000000000b4ac x7 : 0000000000000a20 x6 : ffffffb6c1806400 x5 : 0000000000000000 x4 : ffffffb80d04f000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : 000000000ec04000 x0 : ffffffb7968035f8 Call trace: mt76_dma_add_buf+0x124/0x188 [mt76 (HASH:1029 4)] mt76_dma_rx_reset+0xe8/0xfc [mt76 (HASH:1029 4)] mt7921_wpdma_reset+0x188/0x1b0 [mt7921e (HASH:ee48 5)] mt7921e_mac_reset+0x128/0x418 [mt7921e (HASH:ee48 5)] mt7921_mac_reset_work+0xac/0x1a8 [mt7921_common (HASH:f721 6)] process_one_work+0x188/0x514 worker_thread+0x12c/0x300 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Fix the invalid memory access by validating the DMA index read from the hardware before it is used as a queue index. An out-of-range value, such as the 0xFFFFFFFF returned while the bus is hung, is now clamped so it can no longer corrupt q->head or q->tail. In addition, check the bus_hung flag in mt7921_mac_reset_work() before attempting the reset sequence, reject MCU messages while the bus is hung, and install no-op bus operations when an unrecoverable AER error is detected, preventing further invalid hardware accesses. Due to hardware limitations - such as the lack of a connected hardware reset pin or the absence of host re-probe functionality - affected Wi-Fi devices may not fully recover to a normal operational state after certain errors, even with AER enabled. | ||||
| CVE-2026-93177 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm/powerplay: bounds-check voltage index in Vega10 lookup vddInd, vddciInd and mvddInd from VBIOS-parsed tables index into vddc, vddci and vddmem lookup tables without bounds checks across nine sites. Return -EINVAL when any index is out of range. | ||||
| CVE-2026-85680 | 2 Ultimatemember, Wordpress | 2 Ultimate Member, Wordpress | 2026-09-20 | 8.8 High |
| The Ultimate Member WordPress plugin before 2.13.1 does not escape a value derived from user supplied profile names before outputting it in the page title, and decodes HTML entities in it after its own sanitisation has already run, allowing unauthenticated attackers who register an account to store JavaScript that will execute when any visitor, including an administrator, views their profile. | ||||
| CVE-2026-90223 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound SNL TLV parsing to the skb and add length checks nfc_llcp_recv_snl() walked the SNL TLV list using a u16 offset/length pair derived from skb->len, without bounding reads to the actual skb data. Three problems followed: - For a short frame (skb->len < LLCP_HEADER_SIZE), tlv_len underflowed. - The per-TLV header (type, length) was read without checking that two bytes remained. - A declared TLV length could run past the end of the buffer, and an SDREQ with length == 0 made "service_name_len = length - 1" underflow (size_t), driving an out-of-bounds read in the following strncmp() / nfc_llcp_sock_from_sn(). The SDRES case likewise read tlv[2]/tlv[3] without a length check. A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP. Walk the TLV list by pointer, bounded by skb_tail_pointer() over the linear skb data, and validate each TLV declared length before use. Add explicit length checks for SDREQ (>= 1) and SDRES (exactly 2). Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-90227 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed() Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a partition device or write through a read-only file descriptor. Pass flags and open_for_write through and reject disallowed commands with -EACCES. | ||||
| CVE-2026-90255 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix the SCO setup context lifetime hci_setup_sync() queues a conn_handle_t with a NULL destroy callback, so the context is only freed if hci_enhanced_setup_sync() actually runs. An entry that is cancelled instead is leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when there is no destroy callback, and hci_cmd_sync_clear() cancels every pending entry when the controller is unregistered. The context also stores a bare hci_conn pointer, so the connection can be freed while the work is queued. The dequeue in hci_conn_del() does not cover it either, as it matches on entry->data == conn and entry->data is the wrapper here. Same problem as commit 2f5d635ad590 ("Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks"). Hold the connection and release both from a destroy callback. The submission failure path drops both, since hci_cmd_sync_submit() does not call the destroy callback when it fails to queue. | ||||
| CVE-2026-13354 | 2 Gabe Livan, Wordpress | 2 Asset Cleanup: Page Speed Booster, Wordpress | 2026-09-20 | 7.2 High |
| The Asset CleanUp: Page Speed Booster plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content in all versions up to, and including, 1.4.0.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is only exploitable on instances where combine_loaded_css has been enabled. | ||||
| CVE-2026-90131 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: serialize resident iomap reads with mrec_lock ntfs_read_iomap_begin_resident() walks the MFT record through ntfs_attr_lookup() -> ntfs_attr_find() without taking ni->mrec_lock, while ntfs_attr_record_resize(), ntfs_make_room_for_attr() and ntfs_resident_attr_record_add() memmove() the same base_ni->mrec buffer under that lock. map_mft_record() only takes a reference and does not serialize, so the reader can observe torn attribute length and offset fields while a writer is relocating the records. KCSAN reports the race between the mmap read fault path and both link() and unlink(): BUG: KCSAN: data-race in ntfs_attr_find / ntfs_attr_record_resize write to 0xffff888100af1018 of 4 bytes by task 96 on cpu 1: ntfs_attr_record_resize+0xd2/0x130 ntfs_attr_record_rm+0xad/0x530 ntfs_delete+0x224/0x640 ntfs_unlink+0x14d/0x280 vfs_unlink+0x157/0x520 read to 0xffff888100af1018 of 4 bytes by task 95 on cpu 0: ntfs_attr_find+0x104/0x5b0 ntfs_attr_lookup+0x39c/0x10c0 ntfs_read_iomap_begin_resident+0xc6/0x230 ntfs_read_iomap_begin+0x5d/0xa0 iomap_iter+0x2e2/0x6e0 iomap_read_folio+0x147/0x2a0 ntfs_read_folio+0x108/0x170 filemap_read_folio+0x35/0x100 filemap_fault+0x993/0x1000 value changed: 0x00000250 -> 0x000001f0 The address is mrec + 0x18, i.e. mft_record.bytes_in_use, and the change is the 96 bytes of one $FILE_NAME attribute being removed. Keep base_ni->mrec_lock from the resident read iomap lookup through iomap_end(). This protects both the attribute walk and the subsequent copy from iomap->inline_data, which points into the MFT record. The non-resident path is left alone: ntfs_lookup() already holds the directory inode's mrec_lock when it reads an index folio through read_mapping_folio(), and taking the lock in the shared wrapper deadlocks there with recursive locking on mrec_lock. The comment above the read_mapping_folio() call in fs/ntfs/dir.c notes the same hazard. The seek path uses the same lookup helper but does not dereference iomap->inline_data. Release the lock before returning from that path, whereas the regular read path records base_ni in iomap->private and releases the lock from its iomap_end() callback. Tested with a reproducer that faults in a 16-byte resident file while another thread runs link()/unlink() on it. Before: 40 KCSAN reports in about one second. After: no reports in 180 seconds over 206,090 read iterations and 423,540 link/unlink cycles. A PROVE_LOCKING build shows no lockdep splat with the same reproducer running for 60 seconds. | ||||
| CVE-2026-90132 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: reject unprivileged writes to reserved $LX* xattrs Reject setxattr of the reserved $LXUID, $LXGID, $LXMOD and $LXDEV names from userspace unless the caller has CAP_SYS_ADMIN. | ||||
| CVE-2026-90133 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib() ntfs_ir_to_ib copies all entries from index_root into a freshly allocated index_block_size-byte buffer without verifying that the entries fit in the available space. The entries in index_root may be larger than the usable entry space in the index block. This can cause OOB writes past the end of the allocation. The validator ntfs_index_root_inconsistent() checks that entries are self-consistent within the IR value, but never cross-checks them against index_block_size. There is no bounds check in ntfs_ir_to_ib() before the memcpy. Fixing this at the sink in ntfs_ir_to_ib() since ntfs_index_root_inconsistent() validates the logical consistency of index_root as a structure and a root with large entries is a structurally valid root. The bug is a size conflict of ntfs_ir_to_ib(). Also, the validator is called once per inode load in ntfs_read_locked_inode() while ntfs_ir_to_ib() is only called during a reparent, a check there adds no overhead to the common path. Moreover, even a future call path that bypasses the validator would still be protected. With NULL as first parameter of ntfs_error(), the volume error flag is never set by this call, so the device name will be absent from the error message. In any case, that the caller, ntfs_ir_reparent(), prints an error message that includes the device name on NULL returns. I think this is the best solution available without adding 'struct super_block *sb' as a parameter to ntfs_ir_to_ib(). This heap out-of-bounds write is triggered by a crafted filesystem image, which is not in the kernel threat model, anyway, fixing memory errors would be nice to keep things secure. | ||||
| CVE-2026-90141 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: fix integer overflow in ftp helper port/address parsing ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16 (hport) and into unsigned char (p[]) without checking for overflow. A crafted FTP PASV/EPSV response with an over-long port or address octet wraps the value, so the helper configures the data connection with a truncated port/address. The netfilter conntrack FTP helper had the same defect, fixed in commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16 overflows"). Apply the equivalent fix here: widen the port accumulator to u32 and reject values above 65535, and reject address octets above 255. | ||||
| CVE-2026-90371 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix RXDMAD_C buffer recycling race The RXDMAD_C buffers come from the RRO data queues' page pools, which are bound to a different NAPI, so the direct page-pool recycle used here could race the owning NAPI; take the non-direct path as is already done for WED RX queues. | ||||
| CVE-2026-86814 | 2 Userswp, Wordpress | 2 Userswp, Wordpress | 2026-09-20 | 8.1 High |
| The UsersWP WordPress plugin before 1.5.10 does not verify that a social login provider has confirmed ownership of an email address before using it to resolve an existing account, allowing unauthenticated attackers to log in as any user, including administrators, whose email address they can assert through a provider account of their own. | ||||
| CVE-2026-90191 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: riscv-sbi-mpxy: validate RPMI notification lengths The SBI return value controls how many bytes are copied from shared memory into the RPMI notification buffer. It is not validated against the negotiated shared-memory size before that copy. The event walker also uses a reversed loop condition and can inspect a short event record. Validate the complete notification length before copying it, iterate only while a full event header remains, and stop when a declared event payload extends beyond the copied notification data. | ||||
| CVE-2026-90172 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: destroy QP before mem pools on accept failure On the rdma_accept_failed error path of smbdirect_accept_connect_request(), the receive io posted just above is owned by the QP (recv_io is set to NULL after a successful post). The error path fell through to smbdirect_connection_destroy_mem_pools() before smbdirect_connection_destroy_qp(), so the mem pools and the recv_io slab cache were destroyed while that recv_io was still outstanding on the QP. The drain in smbdirect_connection_destroy_qp() (ib_drain_qp()) is what runs the recv completion that returns the recv_io to the free list, so destroying the pools first leaves the object outstanding at kmem_cache_destroy() time ("Slab cache still has objects") and later frees it into an already-destroyed mempool (mempool_free_bulk NULL-pointer dereference). Give rdma_accept_failed its own teardown that drains the QP first, then destroys the mem pools, and returns. The remaining labels (post_recv_io_failed onward) run before the recv_io was ever posted, so they keep the mem-pools-then-qp order. The outstanding recv_io at kmem_cache_destroy() time: [ 3487.344647] ============================================================================= [ 3487.349942] BUG smbdirect_recv_io_cache_ffff88811ba99000 (Not tainted): Objects remaining on __kmem_cache_shutdown() [ 3487.356078] ----------------------------------------------------------------------------- [ 3487.356078] [ 3487.356738] Object 0xffff8881511c3440 @offset=13376 [ 3487.358464] Allocated in mempool_alloc_noprof+0x18c/0x290 age=1194 cpu=6 pid=22254 [ 3487.361197] mempool_alloc_noprof+0x18c/0x290 [ 3487.361542] smbdirect_connection_create_mem_pools+0x405/0x780 [ 3487.361972] smbdirect_accept_connect_request+0x5a8/0x1b80 [ 3487.362359] smbdirect_listen_rdma_event_handler+0x1579/0x1b90 [ 3487.362779] cma_cm_event_handler+0x9c/0x230 [ 3487.363096] cma_ib_req_handler+0x2682/0x45d0 [ 3487.363414] cm_process_work+0x56/0x3d0 [ 3487.363676] cm_work_handler+0x8a0e/0xd000 [ 3487.367496] process_scheduled_works+0xa07/0x13a0 [ 3487.367859] worker_thread+0x7c9/0xc80 [ 3487.368148] kthread+0x341/0x430 [ 3487.368407] ret_from_fork+0x3a8/0x7a0 [ 3487.368704] ret_from_fork_asm+0x1a/0x30 [ 3487.370307] Slab 0xffffea0005447000 objects=19 used=1 fp=0xffff8881511c0040 flags=0x100000000000240(workingset|head|node=0|zone=2) [ 3487.372840] ------------[ cut here ]------------ [ 3487.373195] WARNING: mm/slub.c:1244 at __slab_err+0x1a/0x30, CPU#6: kworker/6:84/22254 [ 3487.373759] Modules linked in: [ 3487.373993] CPU: 6 UID: 0 PID: 22254 Comm: kworker/6:84 Tainted: G B 7.1.0-next-20260623+ #88 PREEMPT(lazy) [ 3487.374778] Tainted: [B]=BAD_PAGE [ 3487.377830] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 3487.378515] Workqueue: ib_cm cm_work_handler [ 3487.378820] RIP: 0010:__slab_err+0x1a/0x30 [ 3487.379129] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 e8 36 00 00 00 bf 05 00 00 00 be 01 00 00 00 e8 f7 75 45 00 90 <0f> 0b 90 c3 cc cc cc cc cc 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 [ 3487.383255] RSP: 0018:ffff888220fc7050 EFLAGS: 00010093 [ 3487.383643] RAX: ffffffff8168e60a RBX: ffff88810955e640 RCX: ffff88821c381d80 [ 3487.384158] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff870fa080 [ 3487.384662] RBP: ffff888220fc7068 R08: ffffffff870fa087 R09: 1ffffffff0e1f410 [ 3487.385192] R10: dffffc0000000000 R11: fffffbfff0e1f411 R12: ffffea0005447210 [ 3487.385674] R13: ffffea0005447000 R14: ffff888220fc7068 R15: ffff88812a8ab300 [ 3487.388932] FS: 0000000000000000(0000) GS:ffff888427e76000(0000) knlGS:0000000000000000 [ 3487.389529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3487.389934] CR2: 00007ffcf2d84fd8 CR3: 0000000111d64006 CR4: 0000000000f72ef0 [ 3487.390440] PKRU: 55555554 [ 3487.390641] Call Trace: [ 3487.390826] <TASK> [ 3 ---truncated--- | ||||
| CVE-2026-90294 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: delay the final Login Response until the session is registered isert_put_login_tx() puts the final Login Response on the wire before __transport_register_session(), which iscsi_post_login_handler() reaches only after iscsi_target_do_login() returns. An initiator that issues a SCSI command as soon as it sees that response can have it executed against an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses on the NULL dereference. Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 0 UID: 0 PID: 178 Comm: kworker/0:1H Not tainted 7.2.0-rc5-V2CTL-gf5098b6bae76 #10 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ib-comp-wq ib_cq_poll_work RIP: 0010:target_submit+0xbe/0x390 Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 89 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d 7c 24 78 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5a 02 00 00 48 8d 7b 78 4d 8b 6c 24 78 48 b8 00 RSP: 0018:ffff8881058cfa78 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff88810c78c6f0 RCX: ffffffff964bb363 RDX: 000000000000000f RSI: 00000000fffffe00 RDI: 0000000000000078 RBP: 1ffff11020b19f52 R08: 0000000000000001 R09: ffffed1020b19f52 R10: 0000000000000003 R11: ffff88810596c000 R12: 0000000000000000 R13: ffff88810c61b000 R14: ffff88810c6a3400 R15: ffff88810c61b044 FS: 0000000000000000(0000) GS:ffff8881822b2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1f1b83c000 CR3: 000000006fe72001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? __pfx__raw_spin_lock_bh+0x10/0x10 ? __pfx_target_submit+0x10/0x10 ? mutex_lock+0x81/0xe0 ? __pfx_mutex_lock+0x10/0x10 ? iscsit_execute_cmd+0x650/0x850 iscsit_sequence_cmd+0x186/0x3d0 iscsit_process_scsi_cmd+0x87/0x300 isert_recv_done+0x1002/0x2390 ? __pfx_isert_recv_done+0x10/0x10 ? rxe_poll_cq+0x253/0x3d0 ? finish_task_switch.isra.0+0x1dc/0xa70 __ib_process_cq+0xe1/0x390 ib_cq_poll_work+0x46/0x150 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Delay the final Login Response instead. isert_get_rx_pdu() runs from iscsi_target_rx_thread() after conn->rx_login_comp, completed by iscsi_post_login_handler() after __transport_register_session(); iscsi-TCP and cxgbit already take PDUs from that thread, isert alone does not. The buffers are still posted first, so the initiator's first command does not meet an empty receive queue and nothing depends on RNR flow control, and the header and payload live in isert_conn, not in the struct iscsi_login that iscsi_target_nego_release() frees first. Over rxe, 400 login cycles per run, the oops appeared in 10 of 20 unpatched runs and in none of 20 runs with this patch. An initiator that never waits is handled by the next patch. Not tested: iWARP, discovery sessions over iSER, and real HCAs. | ||||