Export limit exceeded: 15013 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15013 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98237 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: mhi_wwan_mbim: guard against a cyclic NDP chain The NDP traversal in mhi_mbim_rx() only stops when wNextNdpIndex is zero. Nothing requires the offsets to advance, so a modem that points an NDP at itself, or at an earlier NDP, keeps the loop spinning forever on one CPU. Break out when the next NDP offset is not larger than the current one. Verified in a QEMU guest with a fault injector feeding the driver's receive callback an NTB whose single NDP points at itself: the unpatched driver spins in mhi_mbim_rx() with one CPU pinned at 100% and the thread never returns. With this check the loop terminates within one iteration. Changes in v2: move the non-increasing check to the wNextNdpIndex retrieval site, as suggested by Loic Poulain, instead of tracking the previous offset in a separate variable. | ||||
| CVE-2026-98263 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rt712-sdca-dmic: fix uninitialized stream_config->type stream_config is not initialized before being passed to sdw_stream_add_slave(). The type field may contain garbage and is later copied to stream->type by sdw_config_stream(). Zero-initialize stream_config so type defaults to SDW_STREAM_PCM. While at it, use snd_sdw_params_to_config() helper instead of open-coding the same logic. | ||||
| CVE-2026-98274 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: psp: avoid conflicts with skb->decrypted and sk_validate_xmit_skb() PSP conflicts with TLS ULP in its usage of both skb->decrypted and sk->sk_validate_xmit_skb(). Make PSP mutually exclusive with TLS ULP, the only other user of either of these. As other users of skb->decrypted come along, they can be added to sk_has_decrypt_user(). It would make sense to also assert that sk->sk_validate_xmit_skb() is also NULL in both of these setup paths for similar future proofing, but the PSP listener/sk_clone() path is still broken and it could be seen as a regression to not allow rx assoc to run on a child of a listener socket with PSP tx assoc state. Include all TCP ULPs in the sk_has_decrypt_user() check, even though TLS is the only one that conflicts with PSP via the decrypted bit. This is intentional because PSP was not designed to be used with ULPs. It is best to close off surface area that may make bugs reachable, until someone wishes to design and test an actual user of PSP with ULPs. | ||||
| CVE-2026-98207 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: spi: reset bytes_xfered before retrying CRC failures mmc_spi_data_do() updates data->bytes_xfered after each block has been transferred successfully. If a later block in the same data request fails with a CRC error, data->bytes_xfered may therefore contain the number of bytes completed before the failing block. mmc_spi_request() has a private recovery path for such CRC failures. It sends STOP_TRANSMISSION, clears data->error and jumps back to crc_recover to issue the same command and data request again. However, it does not clear data->bytes_xfered before the retry. If the retry succeeds, the request is completed with the bytes from the failed attempt still included in data->bytes_xfered. For a multi-block request this can make the completed request report more bytes than were transferred by the successful retry, and can even exceed the request size when most blocks completed before the CRC error. This is most likely to be observed on MMC-over-SPI systems where long multi-block transfers occasionally hit a data CRC error but the mmc_spi-internal retry succeeds. The data itself is retried, but the completion accounting is not. Clear data->bytes_xfered together with data->error before repeating the request so the final completion reports only the bytes transferred by the successful attempt. | ||||
| CVE-2026-106408 | 1 Google | 1 Chrome | 2026-10-07 | 6.5 Medium |
| Protection mechanism failure in Mobile in Google Chrome on on iOS prior to 155.0.8059.39 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-106361 | 1 Google | 1 Chrome | 2026-10-07 | N/A |
| Incorrect provision of specified functionality in Mobile in Google Chrome on on iOS prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to bypass web origin policy via crafted network traffic. (Chromium security severity: Medium) | ||||
| CVE-2026-98226 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter, and is meant to sit above any value that counter can reach. However, it is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system with 4 KiB pages the flag collides with the usage count once that count reaches 4 TiB. swap_usage_in_pages() masks bit 30 out, so whenever the real count has that bit set, every caller of it reads 4 TiB low: * /proc/swaps understates Used by 4 TiB. * A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its "if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff tears the device down while pages are still swapped out. Nothing in the rest of swapoff aborts the teardown, so those pages are lost. Independently of swapoff, the collision also corrupts the counter and the plist. On a device in normal use, a free that leaves bit 30 set in the count makes swap_usage_sub() see the flag where there is only count, and call add_to_avail_list(). It clears the bit with fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below the real one, and calls plist_add() on a device that is already listed, tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking the node a second time. Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on atomic_long_t instead. Note that the usage counter field itself is of this same type, so it is still a valid bit. | ||||
| CVE-2026-98262 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ata: libahci: clear PxCLBU and PxFBU for AHCI_HFLAG_32BIT_ONLY A user reported that commit 105c42566a55 ("ata: ahci: force 32-bit DMA for JMicron JMB582/JMB585") made the JMicron JMB585 unusable on his board. The failure is seen as soon as the ahci driver is probed, and booting with iommu=off does not solve the problem. Looking at the AHCI specification, PxCLBU and PxFBU are both read only '0' for HBAs that do not support 64-bit addressing. For HBAs that do support 64-bit addressing, the registers are read write, with a reset value that is Implementation Specific. When using the AHCI_HFLAG_32BIT_ONLY flag, the HBA does support 64-bit addressing, and a 32-bit DMA mask is set by simply clearing HOST_CAP_64. Thus, in this case, we need to explicitly clear the registers to 0. | ||||
| CVE-2026-98275 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Ack RX overrun interrupt correctly The RX overrun interrupt is reported in interrupt status register 4, but gmac_irq() acknowledges it using the RX descriptor error bit from status register 0. For GMAC0 this writes the GMAC1 overrun bit, while for GMAC1 the shift leaves no bit in the 32-bit register. Acknowledge the same per-port RX overrun bit that was detected. | ||||
| CVE-2026-98267 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: 9p: Fix v9fs_issue_write() to update i_size and remote_i_size Fix v9fs_issue_write() to update i_size and remote_i_size to the new size of the server file if we made it larger, using the start fpos and the count returned by p9_client_write() to calculate the new minimum file size. This assumes that if the 9P server makes a short write (say it hits ENOSPC), a reduced count is returned. | ||||
| CVE-2026-98303 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup When the forward output route cannot be used in icmp_route_lookup(), it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr, the original packet's source address. ip_route_input() only returns an error for truly invalid packets. For unreachable addresses it will succeed and return an input route whose dst.output is set to ip_rt_bug(). The existing check only rejects RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned and later used for output, syzkaller triggering a WARN_ON_ONCE() in ip_rt_bug() as bellow: ------------[ cut here ]------------ WARNING: net/ipv4/route.c:1273 at ip_rt_bug+0x14/0x20 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: ip_push_pending_frames+0xfa/0x100 __icmp_send+0x905/0xf10 ip_options_compile+0xc0/0xd0 ip_rcv_finish_core+0x321/0xae0 ip_rcv+0x1de/0x260 __netif_receive_skb_one_core+0x11a/0x130 netif_receive_skb+0x7b/0x260 tun_get_user+0x11bf/0x1c10 ------------[ cut here ]------------ Reject input route that is RTN_UNREACHABLE to fix it. The net warning is only printed for RTN_LOCAL, as RTN_UNREACHABLE is not the result of a race condition. | ||||
| CVE-2026-98269 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: abort transaction on failure to update inode for hole punching and reflinking If we fail to update the inode we error out without aborting the transaction, which can result in a persistent inconsistency if after the failure the transaction is committed, as we have dropped file extent items from a range and either punched a hole or insert a new file extent item for that range (for reflinks). So add the missing transaction abort. | ||||
| CVE-2026-98322 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_nat: fully initialise new_addr in netmap setup nft_nat_setup_netmap() builds the mapped address in an on-stack union nf_inet_addr. For an IPv4 mapping it writes only the 4-byte .ip member and the loop runs a single 32-bit iteration, but it then copies the whole 16-byte union into range->min_addr and range->max_addr, so the upper 12 bytes reach nf_nat_setup_info() uninitialised. KMSAN reports an uninit-value in nf_nat_setup_info() reached from nft_nat_eval(). The IPv6 path fills all 16 bytes and is not affected. Zero-initialise new_addr. | ||||
| CVE-2026-98336 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't offload TC setup on AP_VLAN interfaces AP_VLAN interfaces are purely virtual, so don't try to offload TC setup to drivers. We can't really use the AP interface either since we may not know it all the time, and it could technically even change. Just reject the TC offload so things get done in software. | ||||
| CVE-2026-106322 | 1 Google | 1 Chrome | 2026-10-07 | N/A |
| Open redirect in AppManifest in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-106384 | 1 Google | 1 Chrome | 2026-10-07 | 5.3 Medium |
| Missing authorization in SiteIsolation in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-106449 | 1 Yawkat | 1 Lz4-java | 2026-10-07 | 3.7 Low |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.4, net.jpountz.lz4.LZ4BlockInputStream configured with stopOnEmptyBlock set to false handles each well-formed empty LZ4Block by recursively calling refill(), allowing a long sequence of empty blocks in an attacker-controlled compressed stream to exhaust the decoding thread's stack and throw StackOverflowError. The default stopOnEmptyBlock setting is true and is not affected, and the issue does not cause memory corruption. This issue is fixed in version 1.11.4. | ||||
| CVE-2026-106555 | 1 Openbsd | 1 Openssh | 2026-10-07 | 2.2 Low |
| In sshd in OpenSSH before 10.6, GSSAPIAuthentication authentication state can incorrectly be persisted across authentication attempts. | ||||
| CVE-2026-106586 | 1 Openbsd | 1 Openssh | 2026-10-07 | 2.5 Low |
| In sshd in OpenSSH before 10.6, the restrict keyword (in authorized_keys) was supposed to be applicable to tunnel forwarding but was not, a different vulnerability than CVE-2026-73283. | ||||
| CVE-2026-106439 | 2026-10-06 | 7.8 High | ||
| Hydra is a framework for elegantly configuring complex applications. From 1.3.4 until 1.3.7 and 1.4.0.dev10, Hydra stores legacy instantiate target blocklists and related execution-policy collections in mutable module-level state. An attacker who controls multiple sibling target entries can resolve hydra._internal.target_policy.UNCONTROLLED_EXECUTION_TARGETS.discard through instantiate(), remove a denied target, and then invoke that target because sibling nodes are processed in insertion order against the same modified policy. The mutation persists in process-global state and can enable code execution with the application's privileges, while a narrow execution whitelist supplied by trusted Python code is not bypassed by the reported direct mutation path. This issue is fixed in versions 1.3.7 and 1.4.0.dev10. | ||||