Export limit exceeded: 417396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417396 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46282 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: frequency: admv1013: fix NULL pointer dereference on str When device_property_read_string() fails, str is left uninitialized but the code falls through to strcmp(str, ...), dereferencing a garbage pointer. Replace manual read/strcmp with device_property_match_property_string() and consolidate the SE mode enums into a single sequential enum, mapping to hardware register values via a switch consistent with other bitfields in the driver. Several cleanup patches have been applied to this driver recently so this will need a manual backport. | ||||
| CVE-2026-46272 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: coresight: tmc-etr: Fix race condition between sysfs and perf mode When trying to run perf and sysfs mode simultaneously, the WARN_ON() in tmc_etr_enable_hw() is triggered sometimes: WARNING: CPU: 42 PID: 3911571 at drivers/hwtracing/coresight/coresight-tmc-etr.c:1060 tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] [..snip..] Call trace: tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] (P) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] (L) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] coresight_enable_path+0x1c8/0x218 [coresight] coresight_enable_sysfs+0xa4/0x228 [coresight] enable_source_store+0x58/0xa8 [coresight] dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x120/0x1b8 vfs_write+0x2c8/0x388 ksys_write+0x74/0x108 __arm64_sys_write+0x24/0x38 el0_svc_common.constprop.0+0x64/0x148 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x1ac/0x1b0 ---[ end trace 0000000000000000 ]--- Since the enablement of sysfs mode is separeted into two critical regions, one for sysfs buffer allocation and another for hardware enablement, it's possible to race with the perf mode. Fix this by double check whether the perf mode's been used before enabling the hardware in sysfs mode. mode: [sysfs mode] [perf mode] tmc_etr_get_sysfs_buffer() spin_lock(&drvdata->spinlock) [sysfs buffer allocation] spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() drvdata->etr_buf = etr_perf->etr_buf spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() WARN_ON(drvdata->etr_buf) // WARN sicne etr_buf initialized at the perf side spin_unlock(&drvdata->spinlock) With this fix, we retain the check for CS_MODE_PERF in get_etr_sysfs_buf. This ensures we verify whether the perf mode's already running before we actually allocate the buffer. Then we can save the time of allocating/freeing the sysfs buffer if race with the perf mode. | ||||
| CVE-2026-46256 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages LOCALIO is an NFS loopback mount optimization that avoids using the network for READ, WRITE and COMMIT if the NFS client and server are determined to be on the same system. But because LOCALIO is still fundamentally "just NFS loopback mount" it is susceptible to recursion deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then back into NFS via nfs_writepages. Fix LOCALIO's potential for direct reclaim deadlock by ensuring that all its page cache allocations are done from GFP_NOFS context. Thanks to Ben Coddington for pointing out commit ad22c7a043c2 ("xfs: prevent stack overflows from page cache allocation"). | ||||
| CVE-2026-46245 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dc_link NULL handling in HPD init amdgpu_dm_hpd_init() may see connectors without a valid dc_link. The code already checks dc_link for the polling decision, but later unconditionally dereferences it when setting up HPD interrupts. Assign dc_link early and skip connectors where it is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init() error: we previously assumed 'dc_link' could be null (see line 931) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c 923 /* 924 * Analog connectors may be hot-plugged unlike other connector 925 * types that don't support HPD. Only poll analog connectors. 926 */ 927 use_polling |= 928 amdgpu_dm_connector->dc_link && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed 929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id); 930 931 dc_link = amdgpu_dm_connector->dc_link; dc_link assigned here. 932 933 /* 934 * Get a base driver irq reference for hpd ints for the lifetime 935 * of dm. Note that only hpd interrupt types are registered with 936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on 937 * hpd_rx isn't available. DM currently controls hpd_rx 938 * explicitly with dc_interrupt_set() 939 */ --> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) { ^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here. 941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1; 942 /* 943 * TODO: There's a mismatch between mode_info.num_hpd 944 * and what bios reports as the # of connectors with hpd | ||||
| CVE-2026-46228 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: ch341: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the controller and driver data lifetime so that they are released on driver unbind. Note that this also makes sure that the SPI controller is placed correctly under the USB interface in the device tree. | ||||
| CVE-2026-46171 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: kvm: fix vector context allocation leak When the second kzalloc (host_context.vector.datap) fails in kvm_riscv_vcpu_alloc_vector_context, the first allocation (guest_context.vector.datap) is leaked. Free it before returning. | ||||
| CVE-2026-46130 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity-fec: fix reading parity bytes split across blocks (take 3) fec_decode_bufs() assumes that the parity bytes of the first RS codeword it decodes are never split across parity blocks. This assumption is false. Consider v->fec->block_size == 4096 && v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs << DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes. Considering that the parity data for each message block starts on a block boundary, the byte alignment in the parity data will iterate through 272*i mod 4096 until the 3 parity blocks have been consumed. On the 16th call (i=15), the alignment will be 4080 bytes into the first block. Only 16 bytes remain in that block, but 17 parity bytes will be needed. The code reads out-of-bounds from the parity block buffer. Fortunately this doesn't normally happen, since it can occur only for certain non-default values of fec_roots *and* when the maximum number of buffers couldn't be allocated due to low memory. For example with block_size=4096 only the following cases are affected: fec_roots=17: nbufs in [1, 3, 5, 15] fec_roots=19: nbufs in [1, 229] fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195] fec_roots=23: nbufs in [1, 89] Regardless, fix it by refactoring how the parity blocks are read. | ||||
| CVE-2026-46076 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs] | ||||
| CVE-2026-46066 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix num_ops off-by-one when crypto allocation fails move_dirty_folio_in_page_array() may fail if the file is encrypted, the dirty folio is not the first in the batch, and it fails to allocate a bounce buffer to hold the ciphertext. When that happens, ceph_process_folio_batch() simply redirties the folio and flushes the current batch -- it can retry that folio in a future batch. However, if this failed folio is not contiguous with the last folio that did make it into the batch, then ceph_process_folio_batch() has already incremented `ceph_wbc->num_ops`; because it doesn't follow through and add the discontiguous folio to the array, ceph_submit_write() -- which expects that `ceph_wbc->num_ops` accurately reflects the number of contiguous ranges (and therefore the required number of "write extent" ops) in the writeback -- will panic the kernel: BUG_ON(ceph_wbc->op_idx + 1 != req->r_num_ops); This issue can be reproduced on affected kernels by writing to fscrypt-enabled CephFS file(s) with a 4KiB-written/4KiB-skipped/repeat pattern (total filesize should not matter) and gradually increasing the system's memory pressure until a bounce buffer allocation fails. Fix this crash by decrementing `ceph_wbc->num_ops` back to the correct value when move_dirty_folio_in_page_array() fails, but the folio already started counting a new (i.e. still-empty) extent. The defect corrected by this patch has existed since 2022 (see first `Fixes:`), but another bug blocked multi-folio encrypted writeback until recently (see second `Fixes:`). The second commit made it into 6.18.16, 6.19.6, and 7.0-rc1, unmasking the panic in those versions. This patch therefore fixes a regression (panic) introduced by cac190c7674f. | ||||
| CVE-2026-46044 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi:ssif: Clean up kthread on errors If an error occurs after the ssif kthread is created, but before the main IPMI code starts the ssif interface, the ssif kthread will not be stopped. So make sure the kthread is stopped on an error condition if it is running. | ||||
| CVE-2026-46014 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Add missing save/restore handling of LBR MSRs MSR_IA32_DEBUGCTLMSR and LBR MSRs are currently not enumerated by KVM_GET_MSR_INDEX_LIST, and LBR MSRs cannot be set with KVM_SET_MSRS. So save/restore is completely broken. Fix it by adding the MSRs to msrs_to_save_base, and allowing writes to LBR MSRs from userspace only (as they are read-only MSRs) if LBR virtualization is enabled. Additionally, to correctly restore L1's LBRs while L2 is running, make sure the LBRs are copied from the captured VMCB01 save area in svm_copy_vmrun_state(). Note, for VMX, this also fixes a flaw where MSR_IA32_DEBUGCTLMSR isn't reported as an MSR to save/restore. Note #2, over-reporting MSR_IA32_LASTxxx on Intel is ok, as KVM already handles unsupported reads and writes thanks to commit b5e2fec0ebc3 ("KVM: Ignore DEBUGCTL MSRs with no effect") (kvm_do_msr_access() will morph the unsupported userspace write into a nop). [sean: guard with lbrv checks, massage changelog] | ||||
| CVE-2026-46008 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix damos_walk() vs kdamond_fn() exit race When kdamond_fn() main loop is finished, the function cancels remaining damos_walk() request and unset the damon_ctx->kdamond so that API callers and API functions themselves can show the context is terminated. damos_walk() adds the caller's request to the queue first. After that, it shows if the kdamond of the damon_ctx is still running (damon_ctx->kdamond is set). Only if the kdamond is running, damos_walk() starts waiting for the kdamond's handling of the newly added request. The damos_walk() requests registration and damon_ctx->kdamond unset are protected by different mutexes, though. Hence, damos_walk() could race with damon_ctx->kdamond unset, and result in deadlocks. For example, let's suppose kdamond successfully finished the damow_walk() request cancelling. Right after that, damos_walk() is called for the context. It registers the new request, and shows the context is still running, because damon_ctx->kdamond unset is not yet done. Hence the damos_walk() caller starts waiting for the handling of the request. However, the kdamond is already on the termination steps, so it never handles the new request. As a result, the damos_walk() caller thread infinitely waits. Fix this by introducing another damon_ctx field, namely walk_control_obsolete. It is protected by the damon_ctx->walk_control_lock, which protects damos_walk() request registration. Initialize (unset) it in kdamond_fn() before letting damon_start() returns and set it just before the cancelling of the remaining damos_walk() request is executed. damos_walk() reads the obsolete field under the lock and avoids adding a new request. After this change, only requests that are guaranteed to be handled or cancelled are registered. Hence the after-registration DAMON context termination check is no longer needed. Remove it together. The issue is found by sashiko [1]. | ||||
| CVE-2026-45973 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR hang in LAG error state unload During firmware reset in LAG mode, a race condition causes the driver to hang indefinitely while waiting for UMR completion during device unload. See [1]. In LAG mode the bond device is only registered on the master, so it never sees sys_error events from the slave. During firmware reset this causes UMR waits to hang forever on unload as the slave is dead but the master hasn't entered error state yet, so UMR posts succeed but completions never arrive. Fix this by adding a sys_error notifier that gets registered before MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device(). This ensures error events reach the bond device throughout teardown. [1] Call Trace: __schedule+0x2bd/0x760 schedule+0x37/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.isra.6+0x2b5/0x4a0 __mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib] ? __xa_erase+0x4a/0xa0 ? _cond_resched+0x15/0x30 ? wait_for_completion+0x31/0x100 ib_dereg_mr_user+0x48/0xc0 [ib_core] ? rdmacg_uncharge_hierarchy+0xa0/0x100 destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs] uverbs_destroy_uobject+0x37/0x150 [ib_uverbs] __uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs] uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] remove_client_context+0x8b/0xd0 [ib_core] disable_device+0x8c/0x130 [ib_core] __ib_unregister_device+0x10d/0x180 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] __mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib] auxiliary_bus_remove+0x1e/0x30 device_release_driver_internal+0x103/0x1f0 bus_remove_device+0xf7/0x170 device_del+0x181/0x410 mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core] mlx5_disable_lag+0x253/0x260 [mlx5_core] mlx5_lag_disable_change+0x89/0xc0 [mlx5_core] mlx5_eswitch_disable+0x67/0xa0 [mlx5_core] mlx5_unload+0x15/0xd0 [mlx5_core] mlx5_unload_one+0x71/0xc0 [mlx5_core] mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core] process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40 | ||||
| CVE-2026-45956 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl() vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to obtain a struct vidi_context pointer. However, drm_dev->dev is the exynos-drm master device, and the driver_data contained therein is not the vidi component device, but a completely different device. This can lead to various bugs, ranging from null pointer dereferences and garbage value accesses to, in unlucky cases, out-of-bounds errors, use-after-free errors, and more. To resolve this issue, we need to store/delete the vidi device pointer in exynos_drm_private->vidi_dev during bind/unbind, and then read this exynos_drm_private->vidi_dev within ioctl() to obtain the correct struct vidi_context pointer. | ||||
| CVE-2026-45932 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tcx/netkit detach permissions when prog fd isn't given This commit fixes a security issue where BPF_PROG_DETACH on tcx or netkit devices could be executed by any user when no program fd was provided, bypassing permission checks. The fix adds a capability check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case. | ||||
| CVE-2026-45901 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: revert commit_mutex usage in reset path It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set' rule run at the same time. Previous patches made it safe to run individual reset handlers concurrently so commit_mutex is no longer required to prevent this. | ||||
| CVE-2026-45861 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in qd_put Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously") started freeing quota data objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>. | ||||
| CVE-2026-43485 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/gsp: drop WARN_ON in ACPI probes These WARN_ONs seem to trigger a lot, and we don't seem to have a plan to fix them, so just drop them, as they are most likely harmless. | ||||
| CVE-2026-43465 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. The issue was discovered by the drivers/net/xdp.py selftest, more specifically the test_xdp_native_tx_mb: - The mlx5 driver allocates a page_pool page and initializes it with a frag counter of 64 (pp_ref_count=64) and the internal frag counter to 0. - The test sends one packet with no payload. - On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP buffer with the packet data starting in the first fragment which is the page mentioned above. - The XDP program runs and calls bpf_xdp_pull_data() which moves the header into the linear part of the XDP buffer. As the packet doesn't contain more data, the program drops the tail fragment since it no longer contains any payload (pp_ref_count=63). - mlx5 device skips counting this fragment. Internal frag counter remains 0. - mlx5 releases all 64 fragments of the page but page pp_ref_count is 63 => negative reference counting error. Resulting splat during the test: WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] Modules linked in: [...] CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] [...] Call Trace: <TASK> mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core] mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core] mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core] mlx5e_close_rq+0x78/0xa0 [mlx5_core] mlx5e_close_queues+0x46/0x2a0 [mlx5_core] mlx5e_close_channel+0x24/0x90 [mlx5_core] mlx5e_close_channels+0x5d/0xf0 [mlx5_core] mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core] mlx5e_change_mtu+0x11d/0x490 [mlx5_core] mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core] netif_set_mtu_ext+0xfc/0x240 do_setlink.isra.0+0x226/0x1100 rtnl_newlink+0x7a9/0xba0 rtnetlink_rcv_msg+0x220/0x3c0 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1e8/0x240 ___sys_sendmsg+0x7c/0xb0 [...] __sys_sendmsg+0x5f/0xb0 do_syscall_64+0x55/0xc70 The problem applies for XDP_PASS as well which is handled in a different code path in the driver. This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | ||||
| CVE-2026-43464 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. Such issue can be observed with the test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of 3600 and shrinking by 256 bytes (an upcoming selftest patch): the last fragment gets released by the XDP code but doesn't get tracked by the driver. This results in a negative pp_ref_count during page release and the following splat: WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137 Modules linked in: [...] CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core] [...] Call Trace: <TASK> mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core] mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core] mlx5e_close_rq+0x50/0x60 [mlx5_core] mlx5e_close_queues+0x36/0x2c0 [mlx5_core] mlx5e_close_channel+0x1c/0x50 [mlx5_core] mlx5e_close_channels+0x45/0x80 [mlx5_core] mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core] mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core] netif_set_mtu_ext+0xf1/0x230 do_setlink.isra.0+0x219/0x1180 rtnl_newlink+0x79f/0xb60 rtnetlink_rcv_msg+0x213/0x3a0 netlink_rcv_skb+0x48/0xf0 netlink_unicast+0x24a/0x350 netlink_sendmsg+0x1ee/0x410 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x232/0x280 ___sys_sendmsg+0x78/0xb0 __sys_sendmsg+0x5f/0xb0 [...] do_syscall_64+0x57/0xc50 This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | ||||