Export limit exceeded: 417396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417396 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63857 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Do not read uninitialized fragment address in airoha_dev_xmit() The transmit loop in airoha_dev_xmit() reads fragment address and length during its final iteration, when the loop index equals skb_shinfo(skb)->nr_frags, at which point the fragment data is uninitialized. While these values are never consumed, the read itself is unsafe and may trigger a page fault. Fix this by avoiding the fragment read on the last iteration. Additionally, move the skb pointer from the first to the last used packet descriptor, so that airoha_qdma_tx_napi_poll() defers freeing the skb until the final descriptor is processed. | ||||
| CVE-2026-63811 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: read COW data with the original inode during atomic write When updating an atomic-write file, f2fs_write_begin() may read the previously written data back from the COW inode: prepare_atomic_write_begin() locates the block in the COW inode and sets use_cow, and the read bio is then built with the COW inode: f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode, ...); and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption (STEP_DECRYPT) for the bio based on that inode via fscrypt_inode_uses_fs_layer_crypto(). However, the folio being filled belongs to the original inode (folio->mapping->host == inode), and the data stored in the COW block was encrypted (or left as plaintext) using the original inode's context, not the COW inode's -- see f2fs_encrypt_one_page(), which keys off fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise operates on folio->mapping->host. The COW inode is created as a tmpfile in the parent directory and inherits its encryption policy from there. With test_dummy_encryption the newly created COW inode gets the dummy policy and becomes encrypted, while a pre-existing regular file -- created before the policy applied, e.g. already present in the on-disk image -- stays unencrypted. The read path then sets STEP_DECRYPT based on the encrypted COW inode and calls fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted original inode) has a NULL ->i_crypt_info, dereferencing it: Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310 Workqueue: f2fs_post_read_wq f2fs_post_read_work Call Trace: fscrypt_decrypt_bio+0x1eb/0x340 f2fs_post_read_work+0xba/0x140 process_one_work+0x91c/0x1a40 worker_thread+0x677/0xe90 kthread+0x2bc/0x3a0 The COW inode is only needed to locate the on-disk block, and that block address is already resolved into @blkaddr by prepare_atomic_write_begin() via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads from that physical @blkaddr directly, so the inode argument only selects the post-read crypto context, not which block is fetched. Reading with @inode therefore returns the same (latest, not-yet-committed) COW data, while making both the fs-layer decryption decision and the inline crypto path use the correct (original inode's) key. With the COW inode no longer used at the read site, the use_cow flag has no remaining consumer; drop it from f2fs_write_begin() and prepare_atomic_write_begin(). | ||||
| CVE-2026-53321 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/napi: cap busy_poll_to 10 msec Currently there's no cap on the maximum amount of time that napi is allowed to poll if no events are found, which can lead to kernel complaints on a task being stuck as there's no conditional rescheduling done within that loop. Just cap it to 10 msec in total, that's already way above any kind of sane value that will reap any benefits, yet low enough that it's nowhere near being able to trigger preemption complaints. | ||||
| CVE-2026-53285 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED [Why] dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(), which disables local softirqs. The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path, which calls BUG_ON(in_interrupt()) because it's invoked within the FPU-enabled (softirq disabled) region, leading to a kernel crash. [How] Wrap the dc_state_create_phantom_plane() call with the DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during this memory allocation. (cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) | ||||
| CVE-2026-53277 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation walk_s1() and kvm_walk_nested_s2() expect to be called while holding kvm->srcu to guard against memslot changes. While this is generally the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the respective walkers without taking kvm->srcu. Fix by acquiring kvm->srcu prior to the table walk in both instances. | ||||
| CVE-2026-53226 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: rockchip: fix generic IRQ chip leak on remove The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe. However, on driver remove/teardown, the generic chips are not automatically freed when the IRQ domain is removed because the domain flags do not include IRQ_DOMAIN_FLAG_DESTROY_GC. This causes both the domain generic chips structure and the associated generic chips to be leaked. Additionally, the generic chips remain on the global gc_list and may later be visited by generic IRQ chip suspend, resume, or shutdown callbacks after the GPIO bank has been removed, potentially resulting in a use-after-free and kernel crash. Fix the resource leak by explicitly calling irq_domain_remove_generic_chips() before removing the IRQ domain in rockchip_gpio_remove(). | ||||
| CVE-2026-53179 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read. | ||||
| CVE-2026-53178 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction Add guards to ensure ie_length is large enough before subtracting fixed IE offsets to prevent unsigned integer underflow. | ||||
| CVE-2026-53156 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmem: core: fix use-after-free bugs in error paths Fix several instances of error paths in which we call __nvmem_device_put() - which may end up freeing the underlying memory and other resources - and then keep on using the nvmem structure. Always put the reference to the nvmem device as the last step before returning the error code. | ||||
| CVE-2026-53120 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] | ||||
| CVE-2026-53118 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vdpa: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] | ||||
| CVE-2026-53115 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] | ||||
| CVE-2026-53113 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix memory leaks in beacon template setup The functions ath11k_mac_setup_bcn_tmpl_ema() and ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates but fail to free it when parameter setup returns an error. Since beacon templates must be released during normal execution, they must also be released in the error handling paths to prevent memory leaks. Fix this by using unified exit paths with proper cleanup in the respective error paths. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-53109 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pgtable-frag: Fix bad page state in pte_frag_destroy powerpc uses pt_frag_refcount as a reference counter for tracking it's pte and pmd page table fragments. For PTE table, in case of Hash with 64K pagesize, we have 16 fragments of 4K size in one 64K page. Patch series [1] "mm: free retracted page table by RCU" added pte_free_defer() to defer the freeing of PTE tables when retract_page_tables() is called for madvise MADV_COLLAPSE on shmem range. [1]: https://lore.kernel.org/all/7cd843a9-aa80-14f-5eb2-33427363c20@google.com/ pte_free_defer() sets the active flag on the corresponding fragment's folio & calls pte_fragment_free(), which reduces the pt_frag_refcount. When pt_frag_refcount reaches 0 (no active fragment using the folio), it checks if the folio active flag is set, if set, it calls call_rcu to free the folio, it the active flag is unset then it calls pte_free_now(). Now, this can lead to following problem in a corner case... [ 265.351553][ T183] BUG: Bad page state in process a.out pfn:20d62 [ 265.353555][ T183] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20d62 [ 265.355457][ T183] flags: 0x3ffff800000100(active|node=0|zone=0|lastcpupid=0x7ffff) [ 265.358719][ T183] raw: 003ffff800000100 0000000000000000 5deadbeef0000122 0000000000000000 [ 265.360177][ T183] raw: 0000000000000000 c0000000119caf58 00000000ffffffff 0000000000000000 [ 265.361438][ T183] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set [ 265.362572][ T183] Modules linked in: [ 265.364622][ T183] CPU: 0 UID: 0 PID: 183 Comm: a.out Not tainted 6.18.0-rc3-00141-g1ddeaaace7ff-dirty #53 VOLUNTARY [ 265.364785][ T183] Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries [ 265.364908][ T183] Call Trace: [ 265.364955][ T183] [c000000011e6f7c0] [c000000001cfaa18] dump_stack_lvl+0x130/0x148 (unreliable) [ 265.365202][ T183] [c000000011e6f7f0] [c000000000794758] bad_page+0xb4/0x1c8 [ 265.365384][ T183] [c000000011e6f890] [c00000000079c020] __free_frozen_pages+0x838/0xd08 [ 265.365554][ T183] [c000000011e6f980] [c0000000000a70ac] pte_frag_destroy+0x298/0x310 [ 265.365729][ T183] [c000000011e6fa30] [c0000000000aa764] arch_exit_mmap+0x34/0x218 [ 265.365912][ T183] [c000000011e6fa80] [c000000000751698] exit_mmap+0xb8/0x820 [ 265.366080][ T183] [c000000011e6fc30] [c0000000001b1258] __mmput+0x98/0x300 [ 265.366244][ T183] [c000000011e6fc80] [c0000000001c81f8] do_exit+0x470/0x1508 [ 265.366421][ T183] [c000000011e6fd70] [c0000000001c95e4] do_group_exit+0x88/0x148 [ 265.366602][ T183] [c000000011e6fdc0] [c0000000001c96ec] pid_child_should_wake+0x0/0x178 [ 265.366780][ T183] [c000000011e6fdf0] [c00000000003a270] system_call_exception+0x1b0/0x4e0 [ 265.366958][ T183] [c000000011e6fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec The bad page state error occurs when such a folio gets freed (with active flag set), from do_exit() path in parallel. ... this can happen when the pte fragment was allocated from this folio, but when all the fragments get freed, the pte_frag_refcount still had some unused fragments. Now, if this process exits, with such folio as it's cached pte_frag in mm->context, then during pte_frag_destroy(), we simply call pagetable_dtor() and pagetable_free(), meaning it doesn't clear the active flag. This, can lead to the above bug. Since we are anyway in do_exit() path, then if the refcount is 0, then I guess it should be ok to simply clear the folio active flag before calling pagetable_dtor() & pagetable_free(). | ||||
| CVE-2026-53104 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix memory leak destroying device All MT76 rx queues have an associated page_pool even if the queue is not associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the page_pool running mt76_dma_cleanup routine during module unload. Moreover returns pages to the page pool if WED is not enabled for WED RRO queues. | ||||
| CVE-2026-53103 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix potential deadlock in mt7925_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() -> mt7925_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership. | ||||
| CVE-2026-53097 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work() When the mt7996 pci chip is detaching, the mt7996_crash_data is released in mt7996_coredump_unregister(). However, the work item dump_work may still be running or pending, leading to UAF bugs when the already freed crash_data is dereferenced again in mt7996_mac_dump_work(). The race condition can occur as follows: CPU 0 (removal path) | CPU 1 (workqueue) mt7996_pci_remove() | mt7996_sys_recovery_set() mt7996_unregister_device() | mt7996_reset() mt7996_coredump_unregister() | queue_work() vfree(dev->coredump.crash_data) | mt7996_mac_dump_work() | crash_data-> // UAF Fix this by ensuring dump_work is properly canceled before the crash_data is deallocated. Add cancel_work_sync() in mt7996_unregister_device() to synchronize with any pending or executing dump work. | ||||
| CVE-2026-53091 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: pull headers in qdisc_pkt_len_segs_init() Most ndo_start_xmit() methods expects headers of gso packets to be already in skb->head. net/core/tso.c users are particularly at risk, because tso_build_hdr() does a memcpy(hdr, skb->data, hdr_len); qdisc_pkt_len_segs_init() already does a dissection of gso packets. Use pskb_may_pull() instead of skb_header_pointer() to make sure drivers do not have to reimplement this. Some malicious packets could be fed, detect them so that we can drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. | ||||
| CVE-2026-52983 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix BQL imbalance in TX path Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight packets are accounted only for the AIROHA_NUM_TX_RING netdev TX queues. The queue index is computed as: qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx) txq = netdev_get_tx_queue(dev, qid); However, airoha_qdma_tx_napi_poll() accounts completions across all netdev TX queues (num_tx_queues), leading to inconsistent BQL accounting. Also reset all netdev TX queues in the ndo_stop callback. | ||||
| CVE-2026-46325 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix iova-to-va conversion for MR page sizes != PAGE_SIZE The current implementation incorrectly handles memory regions (MRs) with page sizes different from the system PAGE_SIZE. The core issue is that rxe_set_page() is called with mr->page_size step increments, but the page_list stores individual struct page pointers, each representing PAGE_SIZE of memory. ib_sg_to_page() has ensured that when i>=1 either a) SG[i-1].dma_end and SG[i].dma_addr are contiguous or b) SG[i-1].dma_end and SG[i].dma_addr are mr->page_size aligned. This leads to incorrect iova-to-va conversion in scenarios: 1) page_size < PAGE_SIZE (e.g., MR: 4K, system: 64K): ibmr->iova = 0x181800 sg[0]: dma_addr=0x181800, len=0x800 sg[1]: dma_addr=0x173000, len=0x1000 Access iova = 0x181800 + 0x810 = 0x182010 Expected VA: 0x173010 (second SG, offset 0x10) Before fix: - index = (0x182010 >> 12) - (0x181800 >> 12) = 1 - page_offset = 0x182010 & 0xFFF = 0x10 - xarray[1] stores system page base 0x170000 - Resulting VA: 0x170000 + 0x10 = 0x170010 (wrong) 2) page_size > PAGE_SIZE (e.g., MR: 64K, system: 4K): ibmr->iova = 0x18f800 sg[0]: dma_addr=0x18f800, len=0x800 sg[1]: dma_addr=0x170000, len=0x1000 Access iova = 0x18f800 + 0x810 = 0x190010 Expected VA: 0x170010 (second SG, offset 0x10) Before fix: - index = (0x190010 >> 16) - (0x18f800 >> 16) = 1 - page_offset = 0x190010 & 0xFFFF = 0x10 - xarray[1] stores system page for dma_addr 0x170000 - Resulting VA: system page of 0x170000 + 0x10 = 0x170010 (wrong) Yi Zhang reported a kernel panic[1] years ago related to this defect. Solution: 1. Replace xarray with pre-allocated rxe_mr_page array for sequential indexing (all MR page indices are contiguous) 2. Each rxe_mr_page stores both struct page* and offset within the system page 3. Handle MR page_size != PAGE_SIZE relationships: - page_size > PAGE_SIZE: Split MR pages into multiple system pages - page_size <= PAGE_SIZE: Store offset within system page 4. Add boundary checks and compatibility validation This ensures correct iova-to-va conversion regardless of MR page size and system PAGE_SIZE relationship, while improving performance through array-based sequential access. Tests on 4K and 64K PAGE_SIZE hosts: - rdma-core/pytests $ ./build/bin/run_tests.py --dev eth0_rxe - blktest: $ TIMEOUT=30 QUICK_RUN=1 USE_RXE=1 NVMET_TRTYPES=rdma ./check nvme srp rnbd [1] https://lore.kernel.org/all/CAHj4cs9XRqE25jyVw9rj9YugffLn5+f=1znaBEnu1usLOciD+g@mail.gmail.com/T/ | ||||