Export limit exceeded: 25940 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25940 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46031 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Reinstate disabling of BHs around IRQ handler If the driver executes ks8851_irq() AND a TX packet has been sent, then the driver enables TX queue via netif_wake_queue() which schedules TX softirq to queue packets for this device. If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to allocate SKBs for the received packets. If netdev_alloc_skb_ip_align() is called with BH enabled, then local_bh_enable() at the end of netdev_alloc_skb_ip_align() will trigger the pending softirq processing, which may ultimately call the .xmit callback ks8851_start_xmit_par(). The ks8851_start_xmit_par() will try to lock struct ks8851_net_par .lock spinlock, which is already locked by ks8851_irq() from which ks8851_start_xmit_par() was called. This leads to a deadlock, which is reported by the kernel, including a trace listed below. If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0 ("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock can also be triggered without received packet in the RX FIFO. The pending softirqs will be processed on return from spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the deadlock as well. Fix the problem by disabling BH around critical sections, including the IRQ handler, thus preventing the net_tx_action() softirq from triggering during these critical sections. The net_tx_action() softirq is triggered once BH are re-enabled and at the end of the IRQ handler, once all the other IRQ handler actions have been completed. __schedule from schedule_rtlock+0x1c/0x34 schedule_rtlock from rtlock_slowlock_locked+0x548/0x904 rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8 ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44 netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188 dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c sch_direct_xmit from __qdisc_run+0x1f8/0x4ec __qdisc_run from qdisc_run+0x1c/0x28 qdisc_run from net_tx_action+0x1f0/0x268 net_tx_action from handle_softirqs+0x1a4/0x270 handle_softirqs from __local_bh_enable_ip+0xcc/0xe0 __local_bh_enable_ip from __alloc_skb+0xd8/0x128 __alloc_skb from __netdev_alloc_skb+0x3c/0x19c __netdev_alloc_skb from ks8851_irq+0x388/0x4d4 ks8851_irq from irq_thread_fn+0x24/0x64 irq_thread_fn from irq_thread+0x178/0x28c irq_thread from kthread+0x12c/0x138 kthread from ret_from_fork+0x14/0x28 | ||||
| CVE-2026-46034 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Fix NULL pointer dereference in interrupt trigger path Add validation to ensure MSI is configured before accessing cdx_irqs array in vfio_cdx_set_msi_trigger(). Without this check, userspace can trigger a NULL pointer dereference by calling VFIO_DEVICE_SET_IRQS with VFIO_IRQ_SET_DATA_BOOL or VFIO_IRQ_SET_DATA_NONE flags before ever setting up interrupts via VFIO_IRQ_SET_DATA_EVENTFD. The vfio_cdx_msi_enable() function allocates the cdx_irqs array and sets config_msi to 1 only when called through the EVENTFD path. The trigger loop (for DATA_BOOL/DATA_NONE) assumed this had already been done, but there was no enforcement of this call ordering. This matches the protection used in the PCI VFIO driver where vfio_pci_set_msi_trigger() checks irq_is() before the trigger loop. | ||||
| CVE-2026-46035 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, alloc_frozen_pages_nolock() called from NMI context can re-enter rmqueue() and acquire the zone lock that the interrupted context is already holding, corrupting the freelists. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: <NMI> dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 rmqueue.isra.0+0x2a9/0xa70 get_page_from_freelist+0xeb/0x450 alloc_frozen_pages_nolock_noprof+0x111/0x1e0 allocate_slab+0x42a/0x500 ___slab_alloc+0xa7/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] </NMI> Fix this by returning NULL early when invoked from NMI on a UP kernel. | ||||
| CVE-2025-68295 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix memory leak in cifs_construct_tcon() When having a multiuser mount with domain= specified and using cifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname, so it needs to be freed before leaving cifs_construct_tcon(). This fixes the following memory leak reported by kmemleak: mount.cifs //srv/share /mnt -o domain=ZELDA,multiuser,... su - testuser cifscreds add -d ZELDA -u testuser ... ls /mnt/1 ... umount /mnt echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8881203c3f08 (size 8): comm "ls", pid 5060, jiffies 4307222943 hex dump (first 8 bytes): 5a 45 4c 44 41 00 cc cc ZELDA... backtrace (crc d109a8cf): __kmalloc_node_track_caller_noprof+0x572/0x710 kstrdup+0x3a/0x70 cifs_sb_tlink+0x1209/0x1770 [cifs] cifs_get_fattr+0xe1/0xf50 [cifs] cifs_get_inode_info+0xb5/0x240 [cifs] cifs_revalidate_dentry_attr+0x2d1/0x470 [cifs] cifs_getattr+0x28e/0x450 [cifs] vfs_getattr_nosec+0x126/0x180 vfs_statx+0xf6/0x220 do_statx+0xab/0x110 __x64_sys_statx+0xd5/0x130 do_syscall_64+0xbb/0x380 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2025-68312 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usbnet: Prevents free active kevent The root cause of this issue are: 1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0); put the kevent work in global workqueue. However, the kevent has not yet been scheduled when the usbnet device is unregistered. Therefore, executing free_netdev() results in the "free active object (kevent)" error reported here. 2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(), if the usbnet device is up, ndo_stop() is executed to cancel the kevent. However, because the device is not up, ndo_stop() is not executed. The solution to this problem is to cancel the kevent before executing free_netdev(). | ||||
| CVE-2025-68229 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show() If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and we attempt to dereference it in tcm_loop_tpg_address_show() we will get a segfault, see below for an example. So, check tl_hba->sh before dereferencing it. Unable to allocate struct scsi_host BUG: kernel NULL pointer dereference, address: 0000000000000194 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop] ... Call Trace: <TASK> configfs_read_iter+0x12d/0x1d0 [configfs] vfs_read+0x1b5/0x300 ksys_read+0x6f/0xf0 ... | ||||
| CVE-2025-71089 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu: disable SVA when CONFIG_X86 is set Patch series "Fix stale IOTLB entries for kernel address space", v7. This proposes a fix for a security vulnerability related to IOMMU Shared Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel page table entries. When a kernel page table page is freed and reallocated for another purpose, the IOMMU might still hold stale, incorrect entries. This can be exploited to cause a use-after-free or write-after-free condition, potentially leading to privilege escalation or data corruption. This solution introduces a deferred freeing mechanism for kernel page table pages, which provides a safe window to notify the IOMMU to invalidate its caches before the page is reused. This patch (of 8): In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware shares and walks the CPU's page tables. The x86 architecture maps the kernel's virtual address space into the upper portion of every process's page table. Consequently, in an SVA context, the IOMMU hardware can walk and cache kernel page table entries. The Linux kernel currently lacks a notification mechanism for kernel page table changes, specifically when page table pages are freed and reused. The IOMMU driver is only notified of changes to user virtual address mappings. This can cause the IOMMU's internal caches to retain stale entries for kernel VA. Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when kernel page table pages are freed and later reallocated. The IOMMU could misinterpret the new data as valid page table entries. The IOMMU might then walk into attacker-controlled memory, leading to arbitrary physical memory DMA access or privilege escalation. This is also a Write-After-Free issue, as the IOMMU will potentially continue to write Accessed and Dirty bits to the freed memory while attempting to walk the stale page tables. Currently, SVA contexts are unprivileged and cannot access kernel mappings. However, the IOMMU will still walk kernel-only page tables all the way down to the leaf entries, where it realizes the mapping is for the kernel and errors out. This means the IOMMU still caches these intermediate page table entries, making the described vulnerability a real concern. Disable SVA on x86 architecture until the IOMMU can receive notification to flush the paging cache before freeing the CPU kernel page table pages. | ||||
| CVE-2026-46020 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp Patch series "mm/damon/core: validate damos_quota_goal->nid". node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The node id is used for si_meminfo_node() and NODE_DATA() without proper validation. As a result, privileged users can trigger an out of bounds memory access using DAMON_SYSFS. Fix the issues. The issue was originally reported [1] with a fix by another author. The original author announced [2] that they will stop working including the fix that was still in the review stage. Hence I'm restarting this. This patch (of 2): Users can set damos_quota_goal->nid with arbitrary value for node_mem_{used,free}_bp. But DAMON core is using those for si_meminfo_node() without the validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo ./damo start --damos_action stat \ --damos_quota_goal node_mem_used_bp 50% -1 \ --damos_quota_interval 1s $ sudo dmesg [...] [ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 Fix this issue by adding the validation of the given node. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio. | ||||
| CVE-2026-46025 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix damon_call() vs kdamond_fn() exit race Patch series "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit race". damon_call() and damos_walk() can leak memory and/or deadlock when they race with kdamond terminations. Fix those. This patch (of 2); When kdamond_fn() main loop is finished, the function cancels all remaining damon_call() requests and unset the damon_ctx->kdamond so that API callers and API functions themselves can know the context is terminated. damon_call() adds the caller's request to the queue first. After that, it shows if the kdamond of the damon_ctx is still running (damon_ctx->kdamond is set). Only if the kdamond is running, damon_call() starts waiting for the kdamond's handling of the newly added request. The damon_call() requests registration and damon_ctx->kdamond unset are protected by different mutexes, though. Hence, damon_call() could race with damon_ctx->kdamond unset, and result in deadlocks. For example, let's suppose kdamond successfully finished the damon_call() requests cancelling. Right after that, damon_call() is called for the context. It registers the new request, and shows the context is still running, because damon_ctx->kdamond unset is not yet done. Hence the damon_call() caller starts waiting for the handling of the request. However, the kdamond is already on the termination steps, so it never handles the new request. As a result, the damon_call() caller threads infinitely waits. Fix this by introducing another damon_ctx field, namely call_controls_obsolete. It is protected by the damon_ctx->call_controls_lock, which protects damon_call() requests registration. Initialize (unset) it in kdamond_fn() before letting damon_start() returns and set it just before the cancelling of remaining damon_call() requests is executed. damon_call() reads the obsolete field under the lock and avoids adding a new request. After this change, only requests that are guaranteed to be handled or cancelled are registered. Hence the after-registration DAMON context termination check is no longer needed. Remove it together. Note that the deadlock will not happen when damon_call() is called for repeat mode request. In tis case, damon_call() returns instead of waiting for the handling when the request registration succeeds and it shows the kdamond is running. However, if the request also has dealloc_on_cancel, the request memory would be leaked. The issue is found by sashiko [1]. | ||||
| CVE-2026-46028 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - snapshot IV for async AEAD requests AF_ALG AEAD AIO requests currently use the socket-wide IV buffer during request processing. For async requests, later socket activity can update that shared state before the original request has fully completed, which can lead to inconsistent IV handling. Snapshot the IV into per-request storage when preparing the AEAD request, so in-flight operations no longer depend on mutable socket state. | ||||
| CVE-2026-46029 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab: return NULL early from kmalloc_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, kmalloc_nolock() called from NMI context can re-enter the slab allocator and acquire n->list_lock that the interrupted context is already holding, corrupting slab state. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: <NMI> dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 get_from_partial_node+0x120/0x4d0 ___slab_alloc+0x8a/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] </NMI> Fix this by returning NULL early when invoked from NMI on a UP kernel. | ||||
| CVE-2026-46001 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data() Fix two bugs in pt5161l_read_block_data(): 1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24], but i2c_smbus_read_block_data() can return up to I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into the caller's buffer before the return value can be checked, so the post-read length validation does not prevent a stack overrun if a device returns more than 24 bytes. Resize the buffer to I2C_SMBUS_BLOCK_MAX. 2. Unexpected positive return on length mismatch: When all three retries are exhausted because the device returns data with an unexpected length, i2c_smbus_read_block_data() returns a positive byte count. The function returns this directly, and callers treat any non-negative return as success, processing stale or incomplete buffer contents. Return -EIO when retries are exhausted with a positive return value, preserving the negative error code on I2C failure. | ||||
| CVE-2026-46002 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext2: reject inodes with zero i_nlink and valid mode in ext2_iget() ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is zero or i_dtime is set, treating them as deleted. However, the case of i_nlink == 0 with a non-zero mode and zero dtime slips through. Since ext2 has no orphan list, such a combination can only result from filesystem corruption - a legitimate inode deletion always sets either i_dtime or clears i_mode before freeing the inode. A crafted image can exploit this gap to present such an inode to the VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via ext2_unlink(), ext2_rename() and ext2_rmdir(): WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295 vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477 do_unlinkat+0x53e/0x730 fs/namei.c:4541 __x64_sys_unlink+0xc6/0x110 fs/namei.c:4587 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rename+0x35e/0x850 fs/ext2/namei.c:374 vfs_rename+0xf2f/0x2060 fs/namei.c:5021 do_renameat2+0xbe2/0xd50 fs/namei.c:5178 __x64_sys_rename+0x7e/0xa0 fs/namei.c:5223 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311 vfs_rmdir+0x204/0x690 fs/namei.c:4348 do_rmdir+0x372/0x3e0 fs/namei.c:4407 __x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Extend the existing i_nlink == 0 check to also catch this case, reporting the corruption via ext2_error() and returning -EFSCORRUPTED. This rejects the inode at load time and prevents it from reaching any of the namei.c paths. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-46004 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Handle probe errors properly The probe procedure of setup_card() in caiaq driver doesn't treat the error cases gracefully, e.g. the error from snd_card_register() calls snd_card_free() but continues. This would lead to a UAF for the further calls like snd_usb_caiaq_control_init(), as Berk suggested in another patch in the link below. However, the problem is not only that; in general, this function drops the all error handlings (as it's a void function) although its caller can propagate an error to snd_probe(), which eventually calls snd_card_free() as a proper error path. That said, we should treat each error case in setup_card(), and just return the error code promptly, which is then handled later as a fatal error in snd_probe(). This patch achieves it by changing the setup_card() to return an error code. Also, the superfluous snd_card_free() call is removed, too. Note that card->private_free can be set still safely at returning an error. All called functions in card_free() have checks of the unassigned resources or NULL checks. | ||||
| CVE-2026-46010 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix error handling in rxgk_extract_token() Fix a missing bit of error handling in rxgk_extract_token(): in the event that rxgk_decrypt_skb() returns -ENOMEM, it should just return that rather than continuing on (for anything else, it generates an abort). | ||||
| CVE-2026-46011 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: fix use-after-free in release path due to uncancelled work The mtk_jpeg_release() function frees the context structure (ctx) without first cancelling any pending or running work in ctx->jpeg_work. This creates a race window where the workqueue callback may still be accessing the context memory after it has been freed. Race condition: CPU 0 (release) CPU 1 (workqueue) ---------------- ------------------ close() mtk_jpeg_release() mtk_jpegenc_worker() ctx = work->data // accessing ctx kfree(ctx) // freed! access ctx // UAF! The work is queued via queue_work() during JPEG encode/decode operations (via mtk_jpeg_device_run). If the device is closed while work is pending or running, the work handler will access freed memory. Fix this by calling cancel_work_sync() BEFORE acquiring the mutex. This ordering is critical: if cancel_work_sync() is called after mutex_lock(), and the work handler also tries to acquire the same mutex, it would cause a deadlock. Note: The open error path does NOT need cancel_work_sync() because INIT_WORK() only initializes the work structure - it does not schedule it. Work is only scheduled later during ioctl operations. | ||||
| CVE-2026-46012 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix memory leaks in rxkad_verify_response() Fix rxkad_verify_response() to free the ticket and the server key under all circumstances by initialising the ticket pointer to NULL and then making all paths through the function after the first allocation has been done go through a single common epilogue that just releases everything - where all the releases skip on a NULL pointer. | ||||
| CVE-2026-46013 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/memfd_luo: fix physical address conversion in put_folios cleanup In memfd_luo_retrieve_folios()'s put_folios cleanup path: 1. kho_restore_folio() expects a phys_addr_t (physical address) but receives a raw PFN (pfolio->pfn). This causes kho_restore_page() to check the wrong physical address (pfn << PAGE_SHIFT instead of the actual physical address). 2. This loop lacks the !pfolio->pfn check that exists in the main retrieval loop and memfd_luo_discard_folios(), which could incorrectly process sparse file holes where pfn=0. Fix by converting PFN to physical address with PFN_PHYS() and adding the !pfolio->pfn check, matching the pattern used elsewhere in this file. This issue was identified by the AI review. https://sashiko.dev/#/patchset/20260323110747.193569-1-duanchenghao@kylinos.cn | ||||
| CVE-2026-46016 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: xlnx: Only access buffer information if IPI is buffered In the receive callback check if message is NULL to prevent possibility of crash by NULL pointer dereferencing. | ||||
| CVE-2026-46017 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: fix deferred split queue races during migration migrate_folio_move() records the deferred split queue state from src and replays it on dst. Replaying it after remove_migration_ptes(src, dst, 0) makes dst visible before it is requeued, so a concurrent rmap-removal path can mark dst partially mapped and trip the WARN in deferred_split_folio(). Move the requeue before remove_migration_ptes() so dst is back on the deferred split queue before it becomes visible again. Because migration still holds dst locked at that point, teach deferred_split_scan() to requeue a folio when folio_trylock() fails. Otherwise a fully mapped underused folio can be dequeued by the shrinker and silently lost from split_queue. [ziy@nvidia.com: move the comment] | ||||