Export limit exceeded: 29046 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 408530 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408530 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-101986 | 2026-10-15 | 9.8 Critical | ||
| An Improper Authentication vulnerability in J-Web of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network attacker to bypass J-Web authentication and execute CGI content with elevated privileges via a crafted HTTP request. | ||||
| CVE-2026-101983 | 2026-10-15 | 9.8 Critical | ||
| A Stack-based Buffer Overflow vulnerability in the httpd process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network attacker to cause remote code execution and denial of service via a J-Web virtual-domain configured. | ||||
| CVE-2026-101967 | 2026-10-15 | 8.8 High | ||
| An OS Command Injection vulnerability in the bootzd zero-touch provisioning daemon of Juniper Networks Junos OS Evolved allows an unauthenticated attacker on the management LAN to execute commands as root via crafted DHCP response. | ||||
| CVE-2026-101965 | 2026-10-15 | 8.8 High | ||
| An Use of Externally-Controlled Format String vulnerability in the gRPC daemon of Juniper Networks Junos OS Evolved allows an authenticated network attacker to cause telemetry-service disruption, information disclosure, or potential root-level code execution via a crafted message to the gNMI service. | ||||
| CVE-2026-101956 | 2026-10-15 | 9.8 Critical | ||
| An Improper Authentication vulnerability in the J-Web web management component of Juniper Networks Junos OS allows an unauthenticated remote attacker to execute arbitrary Junos commands with root privileges via the exposed J-Web web interface. | ||||
| CVE-2026-98389 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip gfx switch_power_profile during GPU reset During resume from GPU reset, the gfx idle work may invoke switch_power_profile before the reset completes. This causes the following assert error because the register access occurs without first releasing the GPU reset semaphore: [ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0 [ 1576.768940] Call Trace: [ 1576.768944] <TASK> [ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu] [ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu] [ 1576.769437] smu_cmn_send_smc_msg_with_params_ext+0xba/0x120 [amdgpu] [ 1576.769721] smu_cmn_send_smc_msg_with_param+0x33/0x40 [amdgpu] [ 1576.769993] smu_v13_0_0_set_power_profile_mode+0x192/0x2b0 [amdgpu] [ 1576.770267] smu_bump_power_profile_mode+0x5d/0x80 [amdgpu] [ 1576.770538] smu_switch_power_profile+0xa4/0xf0 [amdgpu] [ 1576.770839] amdgpu_dpm_switch_power_profile+0x6f/0x90 [amdgpu] [ 1576.771210] amdgpu_gfx_profile_idle_work_handler+0xe9/0x130 [amdgpu] [ 1576.771460] process_one_work+0x23e/0x6f0 [ 1576.771491] worker_thread+0x1c4/0x380 [ 1576.771506] kthread+0x10c/0x150 [ 1576.771512] ? __pfx_worker_thread+0x10/0x10 [ 1576.771518] ? __pfx_kthread+0x10/0x10 [ 1576.771530] ret_from_fork+0x314/0x390 [ 1576.771537] ? __pfx_kthread+0x10/0x10 [ 1576.771546] ret_from_fork_asm+0x1a/0x30 (cherry picked from commit d93b1ff538ce9750c01e0dd0aa62575579c0fc08) | ||||
| CVE-2026-98390 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Avoid divide by zero on virtualized systems On a virtualized system, the number of nodes does not have a relationship to the number of roots. A Xen PVH dom0 can calculate roots_per_node as 0, which crashes with a divide by zero in: if (count++ % roots_per_node) because the underlying topology code on Xen ends up making num_nodes 2 and num_roots 1 and the integer division result is 0. The issue is seen with Xen, but it could affect other systems. Set roots_per_node to 1 in this case. Print a firmware bug when this is performed for non-virtualized systems. [ bp: Massage commit message. ] | ||||
| CVE-2026-98392 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one Valid indices into txq->urbd0s/tfds/bufs are 0..txq->count-1, so tfd_index == txq->count is already out of range. Change the guard in btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'. This issue was reported by Claude Mythos. | ||||
| CVE-2026-98396 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare() KUAP means kernel cannot touch user memory unless it explicitly is enabled. In the kernel it should stay AMR_KUAP_BLOCKED. While returning to userspace just before RFI, kernel should restore the user AMR value back. Looks like GENERIC_ENTRY might be treating arch_exit_to_user_mode_prepare() as the last architecture step before returning to userspace. commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature") therefore called kuap_user_restore() from that hook. But on PowerPC that is too early. After irqentry_exit() / syscall_exit_to_user_mode() we still run platform specific exit routines. e.g. code snippets showing both exception handling and system call handling as the callers of function arch_exit_to_user_mode_prepare() which does kuap_user_restore(). The below path shows that calling kuap_user_restore() is too early when called from arch_exit_to_user_mode_prepare(). Exception handling in exceptions-64s.S ======================================= bl CFUNC(do_page_fault) ..DEFINE_INTERRUPT_HANDLER_ASYNC(do_page_fault) arch_interrupt_async_enter_prepare(regs); state = irqentry_enter(regs); instrumentation_begin(); irq_enter_rcu(); handler(regs); nap_adjust_return(regs); irq_exit_rcu(); instrumentation_end(); arch_interrupt_async_exit_prepare(regs); irqentry_exit(regs, state); <<< too early irqentry_exit_to_user_mode() __exit_to_user_mode_prepare(regs, EXIT_TO_USER_MODE_WORK_IRQ); arch_exit_to_user_mode_prepare(regs, ti_work); <<< too early b interrupt_return_srr .. bl CFUNC(interrupt_exit_user_prepare) <<< already calls kuap_user_restore prep_irq_for_enabled_exit() retry can run kernel code with IRQs on. So only when that routine is fully finished is when the user KUAP should be fully restored which interrupt_exit_user_prepare() already takes care of before returning. Similarly for system call handling in interrupt_64.S ====================================================== bl CFUNC(system_call_exception) .Lsyscall_exit: addi r4,r1,STACK_INT_FRAME_REGS li r5,0 /* !scv */ bl CFUNC(syscall_exit_prepare) .. kuap_assert_locked(); syscall_exit_to_user_mode(regs); <<< too early syscall_exit_to_user_mode_prepare(regs); <<< too early kuap_user_restore(regs); <<< already calls syscall_exit_prepare(), which can enable IRQs, replay a pending interrupt, and only then rfi. Those functions already restore KUAP immediately before rfi. Note that if we restore the user AMR too early like in the current code as shown from the code snippets above, then we get the following warning when CONFIG_PPC_KUAP_DEBUG is enabled: WARNING: arch/powerpc/include/asm/book3s/64/kup.h:293 at interrupt_exit_user_prepare+0x1a0/0x1c0 Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) TRAP: 0700 LR: c00000000000d8d4 CTR: c0000000021fe500 MSR: <SF,EE,ME,IR,DR,RI,LE> CR: 44000804 XER: 20040000 interrupt_exit_user_prepare+0x1a0/0x1c0 interrupt_return_srr_user+0x8/0x12c | ||||
| CVE-2026-98409 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: rtd119x: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic. | ||||
| CVE-2026-98412 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: sequencing: fix NULL-pointer dereference in pwrseq_unit_new() If memory allocation fails in pwrseq_unit_setup_deps(), pwrseq_unit_put() is called to release the partially initialized unit. However, we've never initialized unit->list and pwrseq_unit_release() will unconditionally call list_del() on it. Initialize unit->list right after allocating the unit struct. | ||||
| CVE-2026-98417 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: xfrm: reject unrepresentable espintcp transport headers ESP-in-TCP can hand xfrm packets whose transport header offset no longer fits after the stream parser trims the TCP envelope. The plain transport header reset truncates that offset and triggers the skb warning path. Use the careful transport-header helper and drop the skb through the existing XFRM error path when the offset cannot be represented. | ||||
| CVE-2026-98419 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix out-of-bounds write in reset_per_cpu_data() In reset_per_cpu_data(), al is computed as: al = sizeof(struct net_dm_alert_msg); al += dm_hit_limit * sizeof(struct net_dm_drop_point); al += sizeof(struct nlattr); skb = genlmsg_new(al, GFP_KERNEL); ... nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg)); ... msg = nla_data(nla); memset(msg, 0, al); Because al includes sizeof(struct nlattr) (the 4-byte attribute header), genlmsg_new() allocates al bytes of tailroom starting at nla. However, msg points to nla_data(nla), which is located sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al) therefore writes al bytes starting from msg, exceeding the allocated buffer by sizeof(struct nlattr) (4 bytes) and corrupting skb_shared_info. Fix this by letting al represent only the payload length, allocating the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing al bytes from msg. | ||||
| CVE-2026-98426 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix IRQ leak using wrong index in MSI-X error path mwifiex_pcie_request_irq() registers each MSI-X vector with a per-index dev_id (&card->msix_ctx[i]). On a request_irq() failure the cleanup loop "for (j = 0; j < i; j++)" frees msix_entries[j].vector but passes the failed index's &card->msix_ctx[i] as the dev_id. free_irq() matches on (irq, dev_id), so it fails to find the action registered with &card->msix_ctx[j]: the already-requested IRQ j is not freed (leaked) and free_irq() warns about freeing a non-existent IRQ. Use &card->msix_ctx[j]. | ||||
| CVE-2026-98399 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block Unlike kdump, which passes the re-IPL parameter block through os_info, the stand-alone dump passes it through the IPL parm block address and checksum in lowcore. Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case reipl_type_init() selects IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless, dump_reipl_run() unconditionally dereferences it when preparing the lowcore fields. This may happen to work by chance when address zero contains readable lowcore data. A zero IPL parameter block address is then stored in lowcore, causing the stand-alone dumper to enter disabled wait after completing the dump. Explicitly store a zero IPL parameter block address and checksum when no re-IPL parameter block is available. This does not change the behavior: the stand-alone dumper completes the dump and halts, while valid re-IPL parameter blocks continue to be handled as before. | ||||
| CVE-2026-98400 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in kdump without re-IPL parm block Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case, reipl_type_init() selects IPL_TYPE_UNKNOWN, and reipl_block_actual remains NULL. kdump passes the re-IPL parameter block to the dump kernel through os_info. Before commit 3b9678472bab ("s390/ipl: correct kdump reipl block checksum calculation"), the os_info entry was added only for IPL types which initialized reipl_block_actual. That commit moved the os_info update to machine_crash_shutdown(), making it unconditional. As a result, set_os_info_reipl_block() dereferences reipl_block_actual for IPL_TYPE_UNKNOWN. This may happen to work by chance when address zero contains readable lowcore data and the resulting empty os_info entry is ignored by the dump kernel. Skip the os_info update when no re-IPL parameter block is available. Kdump then collect the dump and reboot without setting re-IPL parameter block. | ||||
| CVE-2026-98402 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: icmp: avoid invalid transport header access in icmp_send tracepoint syzbot reported a WARNING triggered by DEBUG_NET_WARN_ON_ONCE(): WARNING: at skb_transport_header include/linux/skbuff.h:3087 [inline] WARNING: at udp_hdr include/linux/udp.h:23 [inline] WARNING: at do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline] WARNING: at trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11 Call trace: skb_transport_header include/linux/skbuff.h:3087 [inline] udp_hdr include/linux/udp.h:23 [inline] do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline] trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11 __traceiter_icmp_send include/trace/events/icmp.h:11 [inline] __do_trace_icmp_send include/trace/events/icmp.h:11 [inline] trace_icmp_send+0x320/0x49c include/trace/events/icmp.h:11 __icmp_send+0xcfc/0x11d8 net/ipv4/icmp.c:1013 ipv4_send_dest_unreach net/ipv4/route.c:1280 [inline] ipv4_link_failure+0x57c/0x8dc net/ipv4/route.c:1287 dst_link_failure include/net/dst.h:438 [inline] vti_tunnel_xmit+0xe40/0x17a4 net/ipv4/ip_vti.c:307 TP_fast_assign() unconditionally calls udp_hdr(skb) before checking whether the packet is UDP. Furthermore, __icmp_send() can be invoked from paths (e.g., link failures, ARP errors, forwarding, AF_PACKET) where skb->transport_header was never initialized (~0U). Under CONFIG_DEBUG_NET=y, calling skb_transport_header(skb) triggers DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)). Fix this by: 1. Only parsing transport info when iph->protocol == IPPROTO_UDP. 2. Using skb_header_pointer() at skb_network_offset(skb) + (iph->ihl << 2) to safely fetch the UDP header without assuming transport_header is set. | ||||
| CVE-2026-98404 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix a NULL vs ERR_PTR() bug in virtio_gpu_user_framebuffer_create() Smatch complains that returning a NULL here will lead to a NULL pointer dereference in drm_mode_addfb2(). Return an error pointer instead. | ||||
| CVE-2026-98407 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: fix heap OOB write on key removal When a key is removed (data == NULL), rsi_hal_load_key() runs: memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ); set_key is a struct rsi_set_key *, so the subscript is scaled by sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is skb->data + 2560, and the memset writes 144 zero bytes starting 2.4KB past the end of the 160-byte skb data buffer, corrupting unrelated heap objects. The intended byte offset would have been (u8 *)set_key + FRAME_DESC_SZ. The write fires on every DISABLE_KEY callback, so plain disconnects, roams and interface teardowns trigger it on real networks. The memset is redundant: the whole buffer is zeroed right after allocation, so the frame sent to the device is byte-identical without it. Drop the else branch; normal operation is unaffected. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-98408 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: rzv2h: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic. | ||||