Export limit exceeded: 413956 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413956 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98815 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix cdev lifetime Sashiko bot reported a potential problem for the cdev lifetime in [0] - the code there is heavily based on the NVMe code. Currently the NS head .open and .release file_operations methods take and put a reference to the nvme_ns_head to ensure that this structure does not disappear while we open fds for that cdev. In multipath mode, when we teardown the NS head, we call nvme_cdev_del() -> cdev_device_del() -> cdev_del(). However after cdev_del() returns, cdevs already open will remain and their fops will still be callable. As such, we can still reference the cdev after the nvme_ns_head reference count drops to 0 (and is freed). This can be shown with an application which delays between opening the cdev and issuing the ioctl while the NS head is being torn down: # ./ioctl_file /dev/ng1n1 & # waiting 10 seconds .... # ./ini_nvme_teardown.sh [ 21.221718] nvme nvme1: Removing ctrl: NQN "nvme-test-target" [ 21.274609] nvme nvme2: Removing ctrl: NQN "nvme-test-target" # now going to issue ioctl .... [ 26.549285] ================================================================== [ 26.550841] BUG: KASAN: slab-use-after-free in cdev_put.part.0+0x3d/0x40 [ 26.552352] Read of size 8 at addr ffff88811e7fa170 by task ioctl_file/237 [ 26.553805] [ 26.554227] CPU: 3 UID: 0 PID: 237 Comm: ioctl_file Not tainted 7.2.0-rc1-00004-g6852a10e32d4 #921 PREEMPT(lazy) [ 26.554236] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 26.554241] Call Trace: [ 26.554245] <TASK> [ 26.554248] dump_stack_lvl+0x68/0xa0 [ 26.554266] print_report+0x10d/0x5d0 [ 26.554276] ? __virt_addr_valid+0x21d/0x3f0 [ 26.554287] ? cdev_put.part.0+0x3d/0x40 [ 26.554292] kasan_report+0x96/0xd0 [ 26.554300] ? cdev_put.part.0+0x3d/0x40 [ 26.554307] cdev_put.part.0+0x3d/0x40 [ 26.554313] __fput+0x7bc/0xa70 [ 26.554322] fput_close_sync+0xd8/0x190 [ 26.554328] ? __pfx_fput_close_sync+0x10/0x10 [ 26.554337] __x64_sys_close+0x79/0xd0 [ 26.554344] do_syscall_64+0x117/0x6b0 [ 26.554351] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 26.554358] RIP: 0033:0x7f938c067727 [ 26.554364] Code: 48 89 fa 4c 89 df e8 28 ad 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5bf [ 26.554369] RSP: 002b:00007fff49f05980 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 [ 26.554376] RAX: ffffffffffffffda RBX: 00007f938bfd7780 RCX: 00007f938c067727 [ 26.554380] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 [ 26.554383] RBP: 00007fff49f05a10 R08: 0000000000000000 R09: 0000000000000000 [ 26.554386] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 [ 26.554389] R13: 00007fff49f05b40 R14: 00007f938c207000 R15: 000055c148471d78 [ 26.554397] </TASK> [ 26.554399] [ 26.575612] Allocated by task 100: [ 26.575871] kasan_save_stack+0x24/0x50 [ 26.576157] kasan_save_track+0x14/0x30 [ 26.576418] __kasan_kmalloc+0x7f/0x90 [ 26.576668] __kmalloc_noprof+0x281/0x6c0 [ 26.576938] nvme_alloc_ns+0x7f7/0x3170 [ 26.577206] nvme_scan_ns+0x508/0x880 [ 26.577449] async_run_entry_fn+0x8c/0x350 [ 26.577723] process_scheduled_works+0xb6f/0x1a00 [ 26.578034] worker_thread+0x4ad/0xb40 [ 26.578283] kthread+0x34f/0x450 [ 26.578501] ret_from_fork+0x563/0x800 [ 26.578752] ret_from_fork_asm+0x1a/0x30 [ 26.579012] [ 26.579124] Freed by task 237: [ 26.579335] kasan_save_stack+0x24/0x50 [ 26.579596] kasan_save_track+0x14/0x30 [ 26.579855] kasan_save_free_info+0x3a/0x60 [ 26.580131] __kasan_slab_free+0x43/0x70 [ 26.580388] kfree+0x321/0x500 [ 26.580591] nvme_ns_head_chr_release+0x39/0x50 [ 26.580883] __fput+0x352/0xa70 [ 26.581095] fput_close_sync+0xd8/0x190 [ 26.581350] __x64_sys_close+0x79/0xd0 [ 26.581595] do_syscall_64+0x117/0x6b0 [ 26.581842] entry_SYSCAL ---truncated--- | ||||
| CVE-2026-98818 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not wake up kswapd in __kfree_rcu_sheaf() Since kfree_rcu() can be called under pi_lock (a raw spinlock in the scheduler), kfree_rcu() itself should never allocate memory with __GFP_KSWAPD_RECLAIM as waking up kswapd ends up acquiring pi_lock, which leads to a deadlock. Reproducing the issue even intentionally was not straightforward. The set_cpus_allowed_force() path that is called under pi_lock is exercised very rarely, and competing tasks that allocate memory will most likely wake kswapd up. Therefore the existence of the deadlock was verified with a modified kernel that has a lockdep map for waking up kswapd: ====================================================== WARNING: possible circular locking dependency detected 7.2.0-rc1-slab-for-next+ #10 Not tainted ------------------------------------------------------ git/6660 is trying to acquire lock: ffff8e524533c550 (&p->pi_lock){-.-.}-{2:2}, at: _raw_spin_lock_irqsave+0x12/0x20 but task is already holding lock: ffff8e57bffff1a0 (&pgdat->kswapd_wait){....}-{3:3}, at: _raw_spin_lock_irqsave+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&pgdat->kswapd_wait){....}-{3:3}: __lock_acquire+0x5a4/0xc50 lock_acquire.part.0+0xb7/0x240 lock_acquire+0x70/0x170 __raw_spin_lock_irqsave+0x44/0x80 _raw_spin_lock_irqsave+0x12/0x20 __wake_up_common_lock+0x31/0xa0 __wake_up+0x20/0x40 kswapd_wakeup_wake+0x7e/0x110 wakeup_kswapd+0x295/0x320 wake_all_kswapds+0xac/0x1a0 __alloc_pages_slowpath.constprop.0+0x282/0xf80 __alloc_frozen_pages_noprof+0x32a/0x360 alloc_slab_page+0x2e/0x160 allocate_slab+0x82/0x420 new_slab+0x52/0xb0 refill_objects+0x13d/0x190 refill_sheaf+0x5d/0xd0 __pcs_replace_empty_main+0x230/0xb10 [...] -> #1 (kswapd_wakeup){-.-.}-{0:0}: __lock_acquire+0x5a4/0xc50 lock_sync.part.0+0x75/0x100 lock_sync+0x36/0x70 might_wakeup_kswapd+0x61/0xa0 __kfree_rcu_sheaf+0x33/0xd90 kvfree_call_rcu+0x1d4/0x3b0 set_cpus_allowed_force+0x163/0x220 cpuset_cpus_allowed_fallback+0x18b/0x240 select_fallback_rq+0x1e6/0x250 [...] -> #0 (&p->pi_lock){-.-.}-{2:2}: check_prev_add+0xe6/0xe00 validate_chain+0x51e/0x6e0 __lock_acquire+0x5a4/0xc50 lock_acquire.part.0+0xb7/0x240 lock_acquire+0x70/0x170 __raw_spin_lock_irqsave+0x44/0x80 _raw_spin_lock_irqsave+0x12/0x20 try_to_wake_up+0x77/0xa90 default_wake_function+0x27/0x60 autoremove_wake_function+0x23/0xb0 __wake_up_common+0xb8/0x170 __wake_up_common_lock+0x51/0xa0 __wake_up+0x20/0x40 kswapd_wakeup_wake+0x7e/0x110 wakeup_kswapd+0x295/0x320 wake_all_kswapds+0xac/0x1a0 __alloc_pages_slowpath.constprop.0+0x282/0xf80 __alloc_frozen_pages_noprof+0x32a/0x360 alloc_slab_page+0x2e/0x160 allocate_slab+0x82/0x420 new_slab+0x52/0xb0 refill_objects+0x13d/0x190 refill_sheaf+0x5d/0xd0 __pcs_replace_empty_main+0x230/0xb10 [...] other info that might help us debug this: Chain exists of: &p->pi_lock --> kswapd_wakeup --> &pgdat->kswapd_wait Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pgdat->kswapd_wait); lock(kswapd_wakeup); lock(&pgdat->kswapd_wait); lock(&p->pi_lock); *** DEADLOCK *** 3 locks held by git/6660: #0: ffff8e519f0e9e20 (&type->i_mutex_dir_key#6){++++}-{4:4}, at: lookup_slow+0x2d/0x60 #1: ffffffff8a31c460 (kswapd_wakeup){-.-.}- ---truncated--- | ||||
| CVE-2026-98828 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: reject short WMI command responses ath9k_wmi_rsp_callback() removes the validated WMI header and copies the number of bytes expected by the waiting command into its response buffer. A device response shorter than that expectation can therefore be read beyond the skb payload. Record -EMSGSIZE for a short response, complete the waiter, and return the stored status from the command path. This also prevents callers from consuming stale response bytes as a successful reply. | ||||
| CVE-2026-109740 | 1 Mozilla | 1 Firefox | 2026-10-19 | 9.6 Critical |
| Sandbox escape due to incorrect boundary conditions in the Widget: Win32 component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-98802 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: seg6: ensure packet data is writable before modifying SRH and IPv6 DA advance_nextseg() modifies the SRH Segments Left field and the IPv6 destination address without ensuring the packet data is writable. seg6_next_csid_advance_arg() has the same problem when it advances the NEXT-C-SID argument in the destination address. The skb may be cloned, for example by an AF_PACKET socket receiving on the ingress device. advance_nextseg() and seg6_next_csid_advance_arg() then write into the packet data shared with the clone. A read from that socket can return the modified packet instead of the received one. The simplified path below shows this for advance_nextseg(): __netif_receive_skb_one_core __netif_receive_skb_core deliver_skb [orig: users=2, cloned=0] packet_rcv skb_clone clone queued to the AF_PACKET socket consume_skb(orig) [orig: users=1, cloned=1] ipv6_rcv ip6_rcv_core skb_share_check: no-op [orig: users=1] [...] input_action_end_core advance_nextseg writes into the data shared with the clone Call skb_ensure_writable() in advance_nextseg() and in seg6_next_csid_advance_arg() before they modify the packet data. skb_ensure_writable() may reallocate skb->head, which invalidates the pointers into the packet data taken before the call. advance_nextseg() now returns a valid SRH pointer, or NULL if skb_ensure_writable() fails. seg6_next_csid_advance_arg() takes the pointer to the destination address from the skb after skb_ensure_writable(). On failure, the callers drop the packet with SKB_DROP_REASON_NOMEM. | ||||
| CVE-2026-98803 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix rx Scatter-Gather support When a received frame is larger than dma_buf_sz, the DMA scatters it across multiple RX descriptors (rx Scatter-Gather). The secondary RX buffer (sec_page) was only allocated and programmed when split-header (SPH) was active, so for regular frames buffer2 was neither allocated nor backed by a valid mapping. As soon as an incoming frame overflowed buffer1, the DMA wrote the overflow into the unmapped secondary-buffer address, triggering an SMMU translation fault on IOMMU-based platforms: arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x7f0011, cbfrsynra=0x1c90, cb=11 arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x1c90 arm-smmu 15000000.iommu: FSYNR0 = 007f0011 [S1CBNDX=127 WNR PLVL=1] Enable scatter-gather for non-SPH frames on cores that can program an independent secondary RX buffer (GMAC4/XGMAC): allocate and mark buffer2 as valid in stmmac_init_rx_buffers() and stmmac_rx_refill(), and account for it in the buffer length computation. Legacy cores have no set_sec_addr op, so they keep buffer2 disabled. Since buffer2 is handed to the DMA at page offset 0, the page pool sync window is widened to cover both buffers in every mode: offset is set to 0 and max_len to dma_buf_sz + stmmac_rx_offset(). The FCS can straddle the buffer1/buffer2 boundary and a descriptor boundary, so it is now stripped from the tail of the assembled frame with pskb_trim() instead of from a single buffer, avoiding an unsigned underflow for frames that overflow a buffer by 1..3 bytes. For single-buffer frames the XDP program must not see the FCS, so it is removed from the XDP buffer before the program runs. Native XDP currently only supports single-buffer (linear) frames. An oversized frame accepted by the MAC (jumbo enabled) is received via buffer2; the XDP program only sees buffer1, so on a TX/REDIRECT verdict the frame is forwarded truncated. XDP multi-buffer support to handle this case is planned as a follow-up. AF_XDP zero-copy RX is not covered by this change: a ZC queue still programs buffer2 at DMA address 0 (and XGMAC has no buffer2-valid bit), so an oversized frame overflowing buffer1 can still trigger the same SMMU translation fault. Handling is planned as a follow-up. | ||||
| CVE-2026-98820 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: set RQF_USE_SCHED when the operation is known The cached requests are allocated for one operation but can be handed out for another. A passthrough command has RQF_USE_SCHED cleared, so using those flags for a subsequent read/write bio will insert it into the scheduler without ->prepare_request() and frees it without ->finish_request(). For kyber, this leaks the domain token acquired at dispatch and stalls the queue. Don't set RQF_USE_SCHED based on the first operation the batch happened to be allocated for. Instead, set it after the request is claimed by an operation. Introduce a helper function, blk_mq_rq_late_init() for this, and absorb blk_mq_rq_time_init() since the two run together. | ||||
| CVE-2026-98821 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: reject polled dio with user integrity metadata IOCB_HAS_METADATA leaves iocb->private as a uio_meta, while iocb_bio_iopoll() expects a bio. Since 2729a60bbfb9, metadata I/O always uses __blkdev_direct_IO(), which never publishes the bio for polling, so IOPOLL calls bio_poll() on the uio_meta. Reproducer: io_uring IOPOLL plus a PI attribute on an integrity device (scsi_debug dif=1 dix=1). KASAN reports: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004 KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] RIP: 0010:bio_poll+0x9d/0x4b0 Call Trace: iocb_bio_iopoll+0x5b/0x80 io_uring_classic_poll+0xf3/0x140 io_do_iopoll+0x4e3/0xc00 io_iopoll_check+0x275/0x560 __do_sys_io_uring_enter+0x2e5/0x720 Return -EOPNOTSUPP when HIPRI is combined with user metadata. | ||||
| CVE-2026-69880 | 1 Microsoft | 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more | 2026-10-19 | 7.8 High |
| Access of resource using incompatible type ('type confusion') in Desktop Window Manager allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-69882 | 1 Microsoft | 12 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 9 more | 2026-10-19 | 7.8 High |
| Untrusted search path in Windows Update allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-69883 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-19 | 9.8 Critical |
| Use after free in Windows iSCSI allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-69991 | 1 Microsoft | 22 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 19 more | 2026-10-19 | 7.5 High |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-77474 | 2026-10-19 | 7.1 High | ||
| destructive_command_guard (dcg) is a command-line safety tool that blocks destructive shell commands before AI coding agents run them. Prior to 0.6.6, nested or unclosed substitutions are recursively rescanned after an inner scan returns unterminated, producing exponential-time work. The affected scanners are reached through split_command_segments in src/packs/mod.rs. a destructive command followed by nested or unclosed $( or $(( sequences. nested or unclosed $( and $(( sequences cause repeated rescanning of the remaining command suffix. a hung PreToolUse hook fails open, allowing the destructive command to proceed. This issue is fixed in version 0.6.6. | ||||
| CVE-2026-68906 | 1 Mz-automation | 1 Libiec61850 | 2026-10-19 | N/A |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, parseUserInformation in src/mms/iso_acse/acse.c checks len for zero before validating the negative bufPos returned by BerDecoder_decodeLength for a truncated long-form length. The continue path therefore swallows the error, reads buffer[-1], resets parsing to the beginning, and repeats the same malformed state. An unauthenticated remote peer can send a malformed AARE PDU during association to cause an infinite CPU loop under a normal allocator or a one-byte out-of-bounds read and process abort when the preceding byte is inaccessible. This issue is fixed in version 1.6.2. | ||||
| CVE-2026-59967 | 1 Tandoorrecipes | 1 Recipes | 2026-10-19 | 5.4 Medium |
| Tandoor Recipes is an application for managing recipes, planning meals, and building shopping lists. Prior to 2.6.10, looks up BookmarkletImport by sequential primary key within the active Space without restricting created_by to the requesting user when an authenticated member of a shared Space submits another member's pending bookmarklet identifier to POST /api/recipe-from-source/. Request processing uses api/recipe-from-source/, BookmarkletImport, filter, delete. The attack works because the endpoint parses and returns the victim's stored URL and captured page content, then unconditionally deletes the victim's pending import. This can disclose authenticated or private captured page content and destroy another Space member's pending import. This issue is fixed in version 2.6.10. | ||||
| CVE-2026-112140 | 1 Llsourcell | 1 Doctor-dignity | 2026-10-19 | 6.3 Medium |
| A vulnerability was found in llSourcell Doctor-Dignity up to 3f2ffb6c892f13b50a708d05900d3227acb40ded. This impacts the function _get_lib_module of the file python/mlc_chat/chat_module.py. The manipulation of the argument model_lib results in code injection. The attack may be launched remotely. The exploit has been made public and could be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-112107 | 1 Ztxz16 | 1 Fastllm | 2026-10-19 | 6.3 Medium |
| A flaw has been found in ztxz16 fastllm up to 1.8.2. Affected by this issue is the function SafeTensorItem::CreateBuffer of the file src/model.cpp of the component Safetensors Weight Loading. This manipulation of the argument data_offsets causes buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-112103 | 1 F3-factory | 1 Fatfree-core | 2026-10-19 | 3.7 Low |
| A vulnerability has been found in f3-factory fatfree-core up to 3.9.2. This vulnerability affects the function _curl of the file web.php of the component HTTP Client. Such manipulation leads to improper certificate validation. The attack may be performed from remote. Attacks of this nature are highly complex. It is stated that the exploitability is difficult. Upgrading to version 3.9.3 is able to resolve this issue. The name of the patch is a2c755c8dc9ad0eb7d5fd261b09aff90f649433c. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. | ||||
| CVE-2026-111620 | 2 O2oa, Zoneland | 2 O2oa, O2oa | 2026-10-19 | 5.3 Medium |
| O2OA through 10.0.2-ce contains an authorization bypass vulnerability in x_processplatform_assemble_surface that allows authenticated users to download attachments from other works. ActionDownloadWithWork and ActionDownloadWithWorkStream never verify that the requested attachment id belongs to the referenced work or draft, so any visitable work or owned draft can be supplied. Attackers who know an attachment UUID can request it through jaxrs/attachment/download/{id}/work/{workId} to read documents attached to other users' processes. | ||||
| CVE-2026-111610 | 1 B3log | 1 Solo | 2026-10-19 | 5.4 Medium |
| B3log Solo through 4.4.0 contains a missing authorization vulnerability in ArticleConsole that allows authenticated authors to access other authors' articles by omitting per-author ownership checks. Attackers can query the console articles status endpoint to list other authors' drafts, probe draft content via the k parameter, and use push2rhy to push others' articles to the Rhythm community. | ||||