Export limit exceeded: 417330 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417330 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-47790 | 1 Qnap Systems | 1 Quftp Service | 2026-10-24 | N/A |
| A cross-site scripting (XSS) vulnerability has been reported to affect QuFTP Service. If a remote attacker gains a user account, they can then exploit the vulnerability to inject malicious code. We have already fixed the vulnerability in the following version: QuFTP Service 1.4.6 and later QuFTP Service 1.5.5 and later QuFTP Service 1.6.5 and later | ||||
| CVE-2026-99020 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594-regulator: Fix n_linear_ranges for TPS65224 BUCK2-4 The TPS65224 BUCK2, BUCK3 and BUCK4 descriptors pass 4 as n_linear_ranges, but tps65224_bucks_2_3_4_ranges[] only has two entries, covering selectors 0x00-0x45. The linear range helpers loop over n_linear_ranges entries, so any lookup of a selector above 0x45 reads past the end of the array and treats whatever follows it as two more ranges. This happens on the normal registration path when the core checks the voltage constraints against every selector. TPS652G1 uses the same descriptors and is affected too. Use ARRAY_SIZE() so the count always matches the table. | ||||
| CVE-2026-98789 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix objects stuck in free_by_rcu_ttrace do_call_rcu_ttrace() returns early when call_rcu_ttrace_in_progress is set and leaves the objects in free_by_rcu_ttrace. __free_rcu() frees waiting_for_gp_ttrace only and clears the flag. Hence the objects that free_bulk() or __free_by_rcu() added while RCU tasks trace GP was in flight stay in free_by_rcu_ttrace until free_bulk() or alloc_bulk() is called for the same bpf_mem_cache again, which may never happen. The number of such objects is not bounded. Turn call_rcu_ttrace_in_progress into three states: 0 - idle 1 - __free_rcu() is queued 2 - __free_rcu() is queued and free_by_rcu_ttrace got more objects since do_call_rcu_ttrace() sets 2. __free_rcu() does cmpxchg(1 -> 0) and starts the next GP when it fails. It cannot clear the flag first and check free_by_rcu_ttrace later, since bpf_mem_alloc_destroy() frees bpf_mem_cache without waiting for RCU callbacks when the flag is zero. Now __free_rcu() queues itself, so the one that didn't see 'draining' may do call_rcu_tasks_trace() after rcu_barrier_tasks_trace() in free_mem_alloc(). Queue it under rcu_read_lock() and do synchronize_rcu() before the barriers. Calling rcu_barrier_tasks_trace() twice works too, but creating and destroying hash maps in a loop on many cpus slows down to one free_mem_alloc() per GP and kworkers pile up. | ||||
| CVE-2026-98808 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: systemport: Fix buffer overflow in bcm_sysport_get_stats() When running on SYSTEMPORT Lite, certain statistics are unsupported and skipped during bcm_sysport_get_stats(). The variable 'j' tracks the compacted index into the destination data buffer, whereas 'i' iterates over all elements in bcm_sysport_gstrings_stats. Because the buffer allocated by ethtool is sized only according to bcm_sysport_get_sset_count(), storing values at data[i] instead of data[j] writes past the allocated array bounds, leading to memory corruption. Fix this by writing to data[j] instead of data[i]. | ||||
| CVE-2026-98820 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: set RQF_USE_SCHED when the operation is known The cached requests are allocated for one operation but can be handed out for another. A passthrough command has RQF_USE_SCHED cleared, so using those flags for a subsequent read/write bio will insert it into the scheduler without ->prepare_request() and frees it without ->finish_request(). For kyber, this leaks the domain token acquired at dispatch and stalls the queue. Don't set RQF_USE_SCHED based on the first operation the batch happened to be allocated for. Instead, set it after the request is claimed by an operation. Introduce a helper function, blk_mq_rq_late_init() for this, and absorb blk_mq_rq_time_init() since the two run together. | ||||
| CVE-2026-98822 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: prevent AP VLAN tx from other interfaces Since the station lookup was factored out of ieee80211_build_hdr(), ieee80211_lookup_ra_sta() uses sta_info_get_bss() for all AP and AP VLAN frames, not only for control port frames. A unicast frame sent on one interface thus matches a station of a different VLAN of the same BSS and is transmitted to it. Only match stations of the interface the frame is sent on, except for control port frames, since those may be sent for VLAN stations directly on the BSS interface. | ||||
| CVE-2026-98832 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: save IRQ state in blkg_tryget_closest() bio_set_dev() associates the bio with a blkg through bio_associate_blkg(). If the blkg lookup misses, blkg_tryget_closest() takes q->queue_lock with spin_lock_irq() and releases it with spin_unlock_irq(), which unconditionally enables local interrupts. Callers may call bio_set_dev() with interrupts already disabled, e.g. dm-thin's pool_map() does so while holding pool->lock taken with spin_lock_irq(). The nested spin_unlock_irq() then enables interrupts while pool->lock is still held, so an I/O completion softirq can run on the same CPU, re-acquire pool->lock (thin_endio(), or overwrite_endio() -> complete_mapping_preparation()) and deadlock. lockdep reports this as inconsistent SOFTIRQ-ON-W to IN-SOFTIRQ-W usage. Commit 3a762de55b4e ("block: save irq state in blkg_lookup_create()") fixed the same problem while the lock lived in blkg_lookup_create(), but commit 9327a865e395 ("blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()") moved the locking into blkg_tryget_closest() and reverted it to spin_lock_irq(). Save and restore the caller's IRQ state instead. | ||||
| CVE-2026-115929 | 1 Mongodb | 1 Compass | 2026-10-24 | 6.8 Medium |
| MongoDB Compass relies on Electron, a third-party runtime that carries its own TLS root certificate store. This root certificate store has the recoverable eMudhra intermediate CA certificates. Issue is resolved by updating to Compass 1.53.1, which includes Electron 44.9.1. | ||||
| CVE-2026-98093 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_micfil: balance mclk enable/disable hw_params() enables mclk unconditionally and hw_free() disables it unconditionally, but the PCM core does not guarantee 1:1 pairing: hw_free() can run without hw_params(), and hw_params() can be called multiple times from the SETUP state. This triggers an "already disabled" WARN() in the first case and leaks an enable reference in the second, leaving the clock ungateable. Guard both sides with the existing mclk_flag, as fsl_sai.c does with mclk_streams. | ||||
| CVE-2023-7356 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID. | ||||
| CVE-2026-110371 | 2 Wordpress-extensions, Wpchill | 2 Strong Testimonials, Strong Testimonials | 2026-10-24 | 4.3 Medium |
| Missing Authorization vulnerability in WP Chill Strong Testimonials strong-testimonials allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Strong Testimonials: from n/a through 3.3.12. | ||||
| CVE-2026-110381 | 2 Nsquared, Wordpress-extensions | 2 Simply Schedule Appointments, Simply Schedule Appointments | 2026-10-24 | 6.3 Medium |
| Authorization Bypass Through User-Controlled Key vulnerability in NSquared Simply Schedule Appointments simply-schedule-appointments allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Simply Schedule Appointments: from n/a through 1.6.12.35. | ||||
| CVE-2026-96333 | 2 Liquid Web / Stellarwp, Wordpress-extensions | 2 Givewp, Givewp | 2026-10-24 | 7.5 High |
| Authentication Bypass by Spoofing vulnerability in Liquid Web / StellarWP GiveWP give allows Identity Spoofing.This issue affects GiveWP: from n/a through 4.16.8.1. | ||||
| CVE-2026-108438 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-10-24 | 6.5 Medium |
| Use after free in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-106110 | 1 Sixlabors | 1 Imagesharp | 2026-10-24 | 7.5 High |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, the TIFF CCITT Group 3 encoder allocates an undersized compressed-data buffer for narrow 1-bit images. TiffCcittCompressor.Initialize does not reserve enough space for the row data and T4 end-of-line codes, and T4BitCompressor.CompressStrip reaches unchecked writes when TiffCompression.CcittGroup3Fax is selected directly or inherited from decoded TIFF metadata. An attacker-controlled encode or decode-and-re-encode flow can write beyond the logical output span, corrupt process memory, and terminate the process. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106111 | 1 Sixlabors | 1 Imagesharp | 2026-10-24 | 5.9 Medium |
| ImageSharp is a 2D graphics library. From 4.0.0 until 4.1.2, ExrBaseDecompressor.UndoZipCompression accepts a nonempty ZIP or ZIPS inflate result that is shorter than the EXR block's required size. ZipExrCompression.Decompress reconstructs the returned prefix while ExrDecoderCore processes the full expected block from a buffer obtained through Configuration.Default, allowing bytes retained from a completed prior ImageSharp operation to appear in decoded pixels. Applications that expose pixels or output from the later attacker-controlled EXR decode can disclose process-local image data. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106112 | 1 Sixlabors | 1 Imagesharp | 2026-10-24 | 7.5 High |
| ImageSharp is a 2D graphics library. From 4.0.0 until 4.1.2, ICC LUT16 conversion accepts more than four output channels even though ClutCalculator.Calculate and LutEntryCalculator.CalculateLut store intermediate and output values in Vector4. When DecoderOptions.ColorProfileHandling is set to Convert, a malformed embedded profile can direct interpolation and output-LUT operations to write one float per declared channel beyond the four-float destination. This can corrupt memory and terminate the process; the default Preserve mode does not run ICC conversion. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106113 | 1 Sixlabors | 1 Imagesharp | 2026-10-24 | 7.5 High |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, decoding an attacker-supplied 32-bit floating-point TIFF as Image<HalfVector4> and applying HistogramEqualization can produce a non-finite or out-of-range luminance in ColorNumerics.GetBT709Luminance. GrayscaleLevelsRowOperation.Invoke uses the resulting value as an unchecked histogram offset, causing an unsafe out-of-range access and process termination. Adaptive Histogram Equalization and AutoLevel are not affected by this report. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-91423 | 1 Oracle | 1 Siebel Crm Deployment | 2026-10-24 | 6 Medium |
| Vulnerability in the Siebel CRM Deployment product of Oracle Siebel CRM (component: Server Infrastructure). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Siebel CRM Deployment executes to compromise Siebel CRM Deployment. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Siebel CRM Deployment accessible data as well as unauthorized access to critical data or complete access to all Siebel CRM Deployment accessible data. CVSS 3.1 Base Score 6.0 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N). | ||||
| CVE-2026-91439 | 1 Oracle | 1 Siebel Crm Deployment | 2026-10-24 | 5.5 Medium |
| Vulnerability in the Siebel CRM Deployment product of Oracle Siebel CRM (component: Server Infrastructure). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Siebel CRM Deployment executes to compromise Siebel CRM Deployment. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Siebel CRM Deployment accessible data. CVSS 3.1 Base Score 5.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). | ||||