| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails
Re-pend GET_NESTED_STATE_PAGES before exiting to userspace if getting the
nested pages fails in the KVM_RUN path. If userspace re-runs the vCPU, and
vmcs02 holds valid PFNs from the *previous* run of L2, then KVM could
re-enter L2 with stale, unpinned PFNs mapped into e.g. the vAPIC page.
Note, both SVM and VMX (as of commit 11722439fb20 ("KVM: nVMX: Ensure
KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit") ensure the request
is cleared on VM-Exit (including the "forced" case), i.e. there is no risk
of double-mapping due to emulated VMLAUNCH/VMRESUME/VMRUN *and* the request
trying to map the nested pages. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: bound the logical key offset from persistent memory
cache_key_decode() takes a key's logical off from the cache device and
later indexes req_key_tree->subtrees[] by it in get_subtree(). An off
past the device forms a subtree pointer outside the array, which
rb_insert() writes through during replay.
Reject a key of zero length, or whose off+len (computed in 64 bits)
exceeds the device size, before it is used. |
| Release of invalid pointer or reference in Windows Management Instrumentation allows an authorized attacker to elevate privileges locally. |
| Double free in OpenSSH for Windows allows an authorized attacker to elevate privileges locally. |
| Omnigent 0.3.0 before 0.14.0 contains a path traversal vulnerability that allows authenticated users to escape the workspace by setting os_env.cwd on nested sub-agents. Attackers can upload a bundle whose sub-agent uses an absolute or parent-traversing working directory, bypassing root-only validation in bundles.py, to read and write host files as the runner user. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: cancel deferred work items in thread exit
If there are deferred work items on the thread todo list, then they are
not cleaned up in the Thread::release() method. Thus, update the code to
clean up the work items even if they are deferred.
This can happen if the thread dies while it has an active outgoing
transaction. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: guard dc_sink dereferences in MST mode validation
dm_dp_mst_is_port_support_mode() reads
aconnector->dc_sink->dsc_caps... for the DSC branch-throughput check,
and get_conv_frl_bw()'s HDMI-PCON FRL-bandwidth path reads
aconnector->dc_sink->edid_caps.max_frl_rate, both without a NULL
check. dc_sink is cleared asynchronously on MST unplug, and both
functions run from paths that the driver's own comments document as
racing that teardown: the connector probe worker's ->mode_valid
callback and a compositor's atomic check, neither of which holds the
MST manager lock that the teardown path uses. The former does have an
existing dsc_aux NULL check, but dsc_aux isn't reliably cleared in
every path that clears dc_sink, so it doesn't cover this.
Fail the port-support check and skip the FRL conversion path when the
sink is already gone.
(cherry picked from commit 7c3db8da4e039698ae198c870712428644e965c7) |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: ensure packet data is writable before modifying SRH and IPv6 DA
advance_nextseg() modifies the SRH Segments Left field and the IPv6
destination address without ensuring the packet data is writable.
seg6_next_csid_advance_arg() has the same problem when it advances the
NEXT-C-SID argument in the destination address.
The skb may be cloned, for example by an AF_PACKET socket receiving on
the ingress device. advance_nextseg() and seg6_next_csid_advance_arg()
then write into the packet data shared with the clone. A read from that
socket can return the modified packet instead of the received one. The
simplified path below shows this for advance_nextseg():
__netif_receive_skb_one_core
__netif_receive_skb_core
deliver_skb [orig: users=2, cloned=0]
packet_rcv
skb_clone clone queued to the AF_PACKET socket
consume_skb(orig) [orig: users=1, cloned=1]
ipv6_rcv
ip6_rcv_core skb_share_check: no-op [orig: users=1]
[...]
input_action_end_core
advance_nextseg writes into the data shared with the clone
Call skb_ensure_writable() in advance_nextseg() and in
seg6_next_csid_advance_arg() before they modify the packet data.
skb_ensure_writable() may reallocate skb->head, which invalidates the
pointers into the packet data taken before the call.
advance_nextseg() now returns a valid SRH pointer, or NULL if
skb_ensure_writable() fails.
seg6_next_csid_advance_arg() takes the pointer to the destination
address from the skb after skb_ensure_writable().
On failure, the callers drop the packet with SKB_DROP_REASON_NOMEM. |
| In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix use-after-free in page_pool_recycle_ring_bulk()
With CONFIG_PAGE_POOL_STATS=y, page_pool_recycle_ring_bulk() updates
the recycle stats after dropping the producer lock. If it just recycled
the last inflight netmems of a pool being destroyed, page_pool_release()
can pass its producer-lock barrier and free the pool before
recycle_stat_add() runs.
Commit fcc680a647ba7 ("page_pool: allow mixing PPs within one bulk")
moved this stat update after the unlock. Commit 271683bb2cf32
("page_pool: Fix use-after-free in page_pool_recycle_in_ring") later
added the barrier, but only fixed page_pool_recycle_in_ring(). Move
the update back under the lock. |
| Time-of-check time-of-use (toctou) race condition in Reliable Multicast Transport Driver (RMCAST) allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix command effects log lifetime for multipath heads
KASAN reported a use-after-free when an I/O passthrough command was sent
through a multipath namespace head after the controller path that first
created the head had been removed:
BUG: KASAN: slab-use-after-free in nvme_command_effects+0x192/0x200 [nvme_core]
Read of size 4 at addr ffff888141b14400 by task nvme/19811
nvme_command_effects+0x192/0x200 [nvme_core]
nvme_cmd_allowed+0x7e/0x1b0 [nvme_core]
nvme_user_cmd.constprop.0+0x1b5/0x450 [nvme_core]
nvme_ns_head_chr_ioctl+0xf4/0x2a0 [nvme_core]
Move the log cache to the subsystem, with one entry per command set. Both
controllers and namespace heads hold subsystem references, keeping their
log pointers valid until subsystem release. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix cdev lifetime
Sashiko bot reported a potential problem for the cdev lifetime in [0]
- the code there is heavily based on the NVMe code.
Currently the NS head .open and .release file_operations methods take and
put a reference to the nvme_ns_head to ensure that this structure does not
disappear while we open fds for that cdev.
In multipath mode, when we teardown the NS head, we call nvme_cdev_del() ->
cdev_device_del() -> cdev_del(). However after cdev_del() returns, cdevs
already open will remain and their fops will still be callable. As such,
we can still reference the cdev after the nvme_ns_head reference count
drops to 0 (and is freed).
This can be shown with an application which delays between opening the cdev
and issuing the ioctl while the NS head is being torn down:
# ./ioctl_file /dev/ng1n1 &
# waiting 10 seconds ....
# ./ini_nvme_teardown.sh
[ 21.221718] nvme nvme1: Removing ctrl: NQN "nvme-test-target"
[ 21.274609] nvme nvme2: Removing ctrl: NQN "nvme-test-target"
# now going to issue ioctl ....
[ 26.549285] ==================================================================
[ 26.550841] BUG: KASAN: slab-use-after-free in cdev_put.part.0+0x3d/0x40
[ 26.552352] Read of size 8 at addr ffff88811e7fa170 by task ioctl_file/237
[ 26.553805]
[ 26.554227] CPU: 3 UID: 0 PID: 237 Comm: ioctl_file Not tainted 7.2.0-rc1-00004-g6852a10e32d4 #921 PREEMPT(lazy)
[ 26.554236] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 26.554241] Call Trace:
[ 26.554245] <TASK>
[ 26.554248] dump_stack_lvl+0x68/0xa0
[ 26.554266] print_report+0x10d/0x5d0
[ 26.554276] ? __virt_addr_valid+0x21d/0x3f0
[ 26.554287] ? cdev_put.part.0+0x3d/0x40
[ 26.554292] kasan_report+0x96/0xd0
[ 26.554300] ? cdev_put.part.0+0x3d/0x40
[ 26.554307] cdev_put.part.0+0x3d/0x40
[ 26.554313] __fput+0x7bc/0xa70
[ 26.554322] fput_close_sync+0xd8/0x190
[ 26.554328] ? __pfx_fput_close_sync+0x10/0x10
[ 26.554337] __x64_sys_close+0x79/0xd0
[ 26.554344] do_syscall_64+0x117/0x6b0
[ 26.554351] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 26.554358] RIP: 0033:0x7f938c067727
[ 26.554364] Code: 48 89 fa 4c 89 df e8 28 ad 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5bf
[ 26.554369] RSP: 002b:00007fff49f05980 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
[ 26.554376] RAX: ffffffffffffffda RBX: 00007f938bfd7780 RCX: 00007f938c067727
[ 26.554380] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
[ 26.554383] RBP: 00007fff49f05a10 R08: 0000000000000000 R09: 0000000000000000
[ 26.554386] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 26.554389] R13: 00007fff49f05b40 R14: 00007f938c207000 R15: 000055c148471d78
[ 26.554397] </TASK>
[ 26.554399]
[ 26.575612] Allocated by task 100:
[ 26.575871] kasan_save_stack+0x24/0x50
[ 26.576157] kasan_save_track+0x14/0x30
[ 26.576418] __kasan_kmalloc+0x7f/0x90
[ 26.576668] __kmalloc_noprof+0x281/0x6c0
[ 26.576938] nvme_alloc_ns+0x7f7/0x3170
[ 26.577206] nvme_scan_ns+0x508/0x880
[ 26.577449] async_run_entry_fn+0x8c/0x350
[ 26.577723] process_scheduled_works+0xb6f/0x1a00
[ 26.578034] worker_thread+0x4ad/0xb40
[ 26.578283] kthread+0x34f/0x450
[ 26.578501] ret_from_fork+0x563/0x800
[ 26.578752] ret_from_fork_asm+0x1a/0x30
[ 26.579012]
[ 26.579124] Freed by task 237:
[ 26.579335] kasan_save_stack+0x24/0x50
[ 26.579596] kasan_save_track+0x14/0x30
[ 26.579855] kasan_save_free_info+0x3a/0x60
[ 26.580131] __kasan_slab_free+0x43/0x70
[ 26.580388] kfree+0x321/0x500
[ 26.580591] nvme_ns_head_chr_release+0x39/0x50
[ 26.580883] __fput+0x352/0xa70
[ 26.581095] fput_close_sync+0xd8/0x190
[ 26.581350] __x64_sys_close+0x79/0xd0
[ 26.581595] do_syscall_64+0x117/0x6b0
[ 26.581842] entry_SYSCAL
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Add better pm_runtime error handling in func probe
Add a common error path in probe that balances the runtime PM reference. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: set RQF_USE_SCHED when the operation is known
The cached requests are allocated for one operation but can be handed
out for another. A passthrough command has RQF_USE_SCHED cleared, so
using those flags for a subsequent read/write bio will insert it into
the scheduler without ->prepare_request() and frees it without
->finish_request(). For kyber, this leaks the domain token acquired at
dispatch and stalls the queue.
Don't set RQF_USE_SCHED based on the first operation the batch happened
to be allocated for. Instead, set it after the request is claimed by an
operation. Introduce a helper function, blk_mq_rq_late_init() for this,
and absorb blk_mq_rq_time_init() since the two run together. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: cast size to ssize_t when checking hid_bpf_hw_request
As reported by Sashiko:
If a transport driver encounters a hardware error and returns a negative
error code such as -EPIPE, ret is implicitly promoted to size_t when
compared against size. This causes the negative error code to evaluate
as a large positive number, making the (ret > size) condition true.
This silently converts the hardware error into a success return value
and copies the unmodified buffer back, which could leave BPF programs
operating on uninitialized or stale data.
Fix this by casting size into ssize_t to return the actual negative
error code. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't run ops.dequeue() with a DSQ lock held
ops.dequeue() is invoked with the source user DSQ's lock still held on
the consume and move paths (scx_consume_dispatch_q(),
move_task_between_dsqs()). A BPF scheduler which locks the source user
DSQ from ops.dequeue() - e.g. by iterating it with bpf_iter_scx_dsq -
self-deadlocks.
ops.dequeue() can only call the "any" kfuncs and none of them can lock a
builtin DSQ, so the global and bypass paths can't deadlock; however,
all DSQ locks share one lockdep class, so iterating any user DSQ from
ops.dequeue() on those paths trips the recursion check.
Move the invocation after the DSQ unlock on all three paths.
SCX_TASK_IN_CUSTODY is cleared under the lock serializing the transfer
so that the callback is invoked exactly once. |
| Missing Authorization vulnerability in Arraytics Booktics booktics allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Booktics: from n/a through 1.0.28. |
| Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Pixelite Events Manager events-manager allows Leveraging Race Conditions.This issue affects Events Manager: from n/a through 7.4.7. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: vmgenid: set driver_data before registering notification handlers
Both probe paths register their notification handler before assigning
driver_data, which the handler dereferences.
In the devicetree path, the notification IRQ can fire as soon as
devm_request_irq() registers the handler: the interrupt may already be
pending at probe time, for example when a VMM injects the
generation-changed notification while restoring a guest from a snapshot
that was taken before the driver had probed (Firecracker does exactly
this on snapshot restore). The IRQ is also requested with IRQF_SHARED,
so another device sharing the line can trigger the handler just as
early. The handler then calls vmgenid_notify(), which dereferences the
still-NULL driver_data and panics:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.38+ #1 PREEMPT(none)
Hardware name: linux,dummy-virt (DT)
pc : vmgenid_notify.isra.0+0x24/0x8c
lr : vmgenid_of_irq_handler+0x14/0x34
Call trace:
vmgenid_notify.isra.0+0x24/0x8c (P)
vmgenid_of_irq_handler+0x14/0x34
__handle_irq_event_percpu+0x44/0x1bc
handle_irq_event+0x4c/0xb4
handle_fasteoi_irq+0xf8/0x1f8
The ACPI path has the same ordering problem: the handler is installed
with acpi_install_notify_handler() before driver_data is assigned.
ACPI notifications are dispatched asynchronously from a workqueue, so
the window is narrow, but a notification arriving between the two calls
hits the same NULL dereference.
Assign driver_data before registering the handlers. The state is fully
initialized at that point, so the handlers are safe to run. Should
registration fail, the probe error path leaves no dangling pointer
behind: the driver core clears driver_data in device_unbind_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: clear post-EOF pagecache when extending a file via write
Fix netfs to erase the contents of a hole created after the EOF by an
ordinary write if dirty data has been previously left there by writes
through an mmapped region. Neither the buffered nor the unbuffered/DIO
write path clears that stale pagecache.
Zero the tail of the folio straddling the EOF before an extending
write. That is the only folio that can hold data written past the EOF
through an mmap, as pages wholly beyond the EOF can't be faulted in.
The folio is zeroed rather than dropped so a concurrent extending write
can't lose data.
Both write paths downgrade the i_rwsem to shared, so extending writes
can run concurrently and the i_size read by the caller may be stale by
the time the folio is locked. Re-read i_size under the folio lock and
clamp the zeroed range up to it, so a racing write that already put
data into the folio isn't clobbered.
Wait for any writeback on the folio to finish before zeroing it so that
the pagecache isn't modified while it may still be read by the transport
during transmission. Honour IOCB_NOWAIT by returning -EAGAIN rather
than blocking on the folio lock, on writeback, or in folio_mkclean()'s
rmap walk when the folio is mapped.
truncate_pagecache() can't be used here: it must be called with the
i_rwsem held exclusively, but these write paths only hold it shared,
and it would block unconditionally, breaking IOCB_NOWAIT.
Callers that hold i_rwsem exclusively for the whole resize (truncate,
setattr, fallocate, clone) exclude any genuine concurrent buffered
writer, so staleness can instead be decided from the folio's dirty
state, as pagecache_isize_extended() already does for filesystems that
serialise writes against truncate/setattr via a single i_rwsem.
Export netfs_clear_stale_post_isize() helper to handle such case.
The helper is required by the CIFS client to fix generic/363. |
