Export limit exceeded: 412929 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412929 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98868 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: reject a kset that overruns its segment cache_replay(), the writeback worker and the GC worker read a kset of get_kset_onmedia_size() bytes and advance the position by it. A forged key_num makes that size exceed the segment's remaining space, so the advance walks past the segment and trips the cache_pos_advance() BUG_ON. Reject a kset whose on-media size exceeds cache_seg_remain() before use. | ||||
| CVE-2026-98787 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix missing migration protection in __rhtab_map_lookup_and_delete_batch() bpf_mem_cache_free_rcu() uses this_cpu_ptr() which requires migration to be disabled. All callers of rhtab_delete_elem() disable migration except __rhtab_map_lookup_and_delete_batch(), which calls it under rcu_read_lock() only. On CONFIG_PREEMPT_RCU, rcu_read_lock() does not disable preemption or migration, so the task can migrate between CPUs during the delete loop, causing this_cpu_ptr() to trigger: BUG: using smp_processor_id() in preemptible [00000000] code Fix by wrapping the delete loop in migrate_disable()/migrate_enable() in __rhtab_map_lookup_and_delete_batch(), matching the migration protection that the other callers already provide. | ||||
| CVE-2026-98788 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: futex: Fix private hash use-after-free on resize poll_state_synchronize_rcu(mm->futex.phash.batches) is used by futex_ref_drop() to check that a grace period has passed since the current hash was published. This relies on batches referencing a grace period which started after the hash pointer was assigned. __futex_pivot_hash() sets mmph->batches before it replaces mmph->hash: scoped_guard(rcu) { mmph->batches = get_state_synchronize_rcu(); rcu_assign_pointer(mmph->hash, new); } The scoped_guard(rcu) doesn't stop new grace periods from starting, and if one starts between those two assignments, futex_ref_drop() can move forward while a reader still holds a pointer to the old hash. Fix things by setting mmph->batches after assigning mmph->hash. The scoped_guard(rcu) isn't needed, so let's drop that as well. | ||||
| CVE-2026-98789 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix objects stuck in free_by_rcu_ttrace do_call_rcu_ttrace() returns early when call_rcu_ttrace_in_progress is set and leaves the objects in free_by_rcu_ttrace. __free_rcu() frees waiting_for_gp_ttrace only and clears the flag. Hence the objects that free_bulk() or __free_by_rcu() added while RCU tasks trace GP was in flight stay in free_by_rcu_ttrace until free_bulk() or alloc_bulk() is called for the same bpf_mem_cache again, which may never happen. The number of such objects is not bounded. Turn call_rcu_ttrace_in_progress into three states: 0 - idle 1 - __free_rcu() is queued 2 - __free_rcu() is queued and free_by_rcu_ttrace got more objects since do_call_rcu_ttrace() sets 2. __free_rcu() does cmpxchg(1 -> 0) and starts the next GP when it fails. It cannot clear the flag first and check free_by_rcu_ttrace later, since bpf_mem_alloc_destroy() frees bpf_mem_cache without waiting for RCU callbacks when the flag is zero. Now __free_rcu() queues itself, so the one that didn't see 'draining' may do call_rcu_tasks_trace() after rcu_barrier_tasks_trace() in free_mem_alloc(). Queue it under rcu_read_lock() and do synchronize_rcu() before the barriers. Calling rcu_barrier_tasks_trace() twice works too, but creating and destroying hash maps in a loop on many cpus slows down to one free_mem_alloc() per GP and kworkers pile up. | ||||
| CVE-2026-98797 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: cap skb->queue_mapping when the tx queue is picked skbedit can set skb->queue_mapping and raise the per-CPU skip_txqueue flag so __dev_queue_xmit() honours the mapping. __dev_queue_xmit() cleared the flag before sch_handle_egress() and only read it afterwards, so the flag was not confined to the xmit that set it: a nested xmit (mirred redirect or mirror, or a drop after skbedit) could set the flag and the outer xmit would consume it for an skb that never went through skbedit. A forwarded packet still carries the ingress NIC's rx_queue + 1 in skb->queue_mapping, so the outer device then indexes its tx queue state with that stale value. Taprio's child array q->qdiscs[] is sized to the device's queue count, so taprio_enqueue() indexes past its allocation and dereferences the result as a struct Qdisc *. We (ab)use the skb->nf_skip_egress which means "skip netfilter egress for this packet" to tag to "am I in tc egress?". Despite the overload I dont see it as a conflict since the marker is set only around the single sch_handle_egress() call and ingress path is guarded by tc_at_ingress. I will send a followup(net-next) patch once this hits net-next to rename the skb->nf_skip_egress bit/flag to skb->skip_egress Arm the flag only from the egress classifier that can use it: raise skip_txqueue from tcf_skbedit_act() only when it runs inside sch_handle_egress(), thanks to skb->nf_skip_egress. An egress qdisc classifier runs in q->enqueue(), after the tx queue has been picked, so a mapping it sets cannot affect the current packet; arming the flag there only pollutes it for a later xmit. Then own the flag for the xmit frame the egress hook runs in: save the incoming value and clear it just before sch_handle_egress(), and restore it after the hook - on the consumed (drop) path, or, in the same call that reads it, on the surviving path. The save and the restores stay inside the egress_needed_key static branch, so a packet pays for them only when egress hooks are active (2f1e85b1aee4). Store the value netdev_cap_txqueue() selected back into skb->queue_mapping in netdev_tx_queue_mapping(), as netdev_core_pick_tx() already does, so the skip_txqueue path never hands a later reader on the xmit path a mapping the device cannot serve. A store made still later in the same frame, by a tc BPF program attached to a transmit qdisc, is outside this path and is not re-capped; a separate followup will resolve that path. netdev_xmit_skip_txqueue() returns the previous flag value so the save-and-clear is one call, and a no-op stub is provided when CONFIG_NET_EGRESS is disabled. skb->nf_skip_egress is compiled under CONFIG_NET_EGRESS rather than CONFIG_NETFILTER_SKIP_EGRESS, so skb_at_tc_egress() is valid whenever the egress path is built. A local user in a network namespace can redirect a packet from a device with more TX queues to one with fewer after setting a mapping valid only on the larger device. That reaches these reads and, under KASAN, faults with "slab-out-of-bounds in taprio_enqueue". Conditions to recreate the bug: the report's own trigger is a local user with CAP_NET_ADMIN in a network namespace, so no eBPF program is needed. With CONFIG_NET_SCH_TAPRIO=y, CONFIG_NET_ACT_SKBEDIT=y, CONFIG_NET_ACT_MIRRED=y, CONFIG_NET_CLS_MATCHALL=y, CONFIG_NET_SCH_PRIO=y and KASAN enabled, create qa (3 queues), qb (2 queues) and qc (1 queue) as dummy devices; put a taprio root on qb (num_tc 1, queues 2@0) and clsact on all three; then add an egress matchall filter on every device. On qa: "action skbedit queue_mapping 2 pipe action mirred egress redirect dev qb". On qb: "action mirred egress mirror dev qc". On qc: "action skbedit queue_mapping 0 pipe". Send one packet out qa. qc's skbedit sets the flag while qb's outer xmit is in flight; without the fix qb consumes it and reads its two-entry taprio child array with the forwarded packet's stale mapping. A qc whose skb ---truncated--- | ||||
| CVE-2026-98799 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Skip detached progs in trampoline images that are still in use bpf_tramp_image_put() makes sure a trampoline image is not freed while a task may still be running in it, but nothing similar is done for the progs called by that image. Detach drops the last prog reference right away and the prog is freed after grace periods, on the basis that a task still in the traced function skips the fexit progs once the nop at ip_after_call is patched to a jump. That leaves out a task sleeping in a sleepable prog that runs before the detached one, which no grace period waits for: CPU 0 CPU 1 in image I, sleeping in prog S detach P from I's trampoline -> new image, bpf_tramp_image_put(I) bpf_prog_put(P), last ref grace periods, P freed back from S __bpf_prog_enter(P) call P->bpf_func If S and P are fexit progs the task is already past the patched jump, and fentry only images don't have one. On x86 this is an int3 in poisoned bpf_prog_pack memory: Oops: int3: 0000 [#1] SMP NOPTI CPU: 18 UID: 0 PID: 94573 Comm: x169 Not tainted 6.18.44 #1 PREEMPT(lazy) RIP: 0010:0xffffffffc0601d8d Call Trace: <TASK> ? bpf_trampoline_6442515411+0x1a4/0x21b bpf_lsm_bprm_committed_creds+0x5/0x10 security_bprm_committed_creds+0x5f/0x70 begin_new_exec+0x2d6/0x410 ... We hit this in production when progs attached through trampolines got detached while their hooks were busy, and it was independently found with a fuzzer and KASAN. Have the JITs emit a patchable nop in front of each prog call sequence and record it in the image. When a prog is detached, patch its nop to a jump over the call sequence. Progs that stay attached keep running for the tasks that are in the image, and ip_after_call isn't needed anymore. The task can be in any image that isn't freed yet, not only in the current one. It sleeps in image I1 that calls S, P and Q, then P is detached and the trampoline moves to image I2, then Q is detached and its call is still in I1. So the trampoline keeps a list of its images until they are freed, and detaching a prog patches its nop in all of them. Images hold a reference on the trampoline for that long. On riscv and loongarch a jump of any range takes several instructions, and a task preempted in the middle of them could resume into half of the new sequence. The nop is a single instruction there, patched to a near branch through arch_bpf_trampoline_skip(). With the extra nops, BPF_MAX_TRAMP_LINKS progs no longer fit in a page on x86 and arm64 (and already didn't on powerpc), so lower the limit there like s390 does. | ||||
| CVE-2026-98803 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix rx Scatter-Gather support When a received frame is larger than dma_buf_sz, the DMA scatters it across multiple RX descriptors (rx Scatter-Gather). The secondary RX buffer (sec_page) was only allocated and programmed when split-header (SPH) was active, so for regular frames buffer2 was neither allocated nor backed by a valid mapping. As soon as an incoming frame overflowed buffer1, the DMA wrote the overflow into the unmapped secondary-buffer address, triggering an SMMU translation fault on IOMMU-based platforms: arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x7f0011, cbfrsynra=0x1c90, cb=11 arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x1c90 arm-smmu 15000000.iommu: FSYNR0 = 007f0011 [S1CBNDX=127 WNR PLVL=1] Enable scatter-gather for non-SPH frames on cores that can program an independent secondary RX buffer (GMAC4/XGMAC): allocate and mark buffer2 as valid in stmmac_init_rx_buffers() and stmmac_rx_refill(), and account for it in the buffer length computation. Legacy cores have no set_sec_addr op, so they keep buffer2 disabled. Since buffer2 is handed to the DMA at page offset 0, the page pool sync window is widened to cover both buffers in every mode: offset is set to 0 and max_len to dma_buf_sz + stmmac_rx_offset(). The FCS can straddle the buffer1/buffer2 boundary and a descriptor boundary, so it is now stripped from the tail of the assembled frame with pskb_trim() instead of from a single buffer, avoiding an unsigned underflow for frames that overflow a buffer by 1..3 bytes. For single-buffer frames the XDP program must not see the FCS, so it is removed from the XDP buffer before the program runs. Native XDP currently only supports single-buffer (linear) frames. An oversized frame accepted by the MAC (jumbo enabled) is received via buffer2; the XDP program only sees buffer1, so on a TX/REDIRECT verdict the frame is forwarded truncated. XDP multi-buffer support to handle this case is planned as a follow-up. AF_XDP zero-copy RX is not covered by this change: a ZC queue still programs buffer2 at DMA address 0 (and XGMAC has no buffer2-valid bit), so an oversized frame overflowing buffer1 can still trigger the same SMMU translation fault. Handling is planned as a follow-up. | ||||
| CVE-2026-98806 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix aura BPID assignment when CONFIG_DCB is enabled Previously, BPID assignment under CONFIG_DCB assumed `queue_to_pfc_map` was always initialized. For SDP VFs this leads to invalid memory access as it was not initialized. This patch adds a NULL check for `queue_to_pfc_map` before dereferencing it. Also, simplifies the logic by always assigning a default BPID first, then conditionally overriding it if CONFIG_DCB is enabled and the map exists. | ||||
| CVE-2026-98807 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds when handling team device events The mlx5_handle_changeupper_event() and mlx5_handle_changeinfodata_event() functions check for LAG masters (which includes both bonding and team devices) but only call bonding-specific APIs. When processing team device events, calling bond_slave_get_rcu() and bond_is_slave_inactive() on team_port structures causes KASAN to detect an out-of-bounds memory access since team_port is smaller than bond slave. Fix this by wrapping the bond-specific API calls with a check for bonding devices. This allows the function to still process LAG events for both bonding and teams but only calls bond-specific functions when dealing with actual bonding devices. For mlx5_handle_changeinfodata_event(), keep the explicit bond check as mlx5 doesn't handle state information for team ports anyway. Tested with Mellanox ConnectX-5 on Linux 7.2.0-rc6: - Bonding: PASS (no regressions) - Team device: PASS (no KASAN errors) | ||||
| CVE-2026-98810 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix slab-out-of-bounds read in ieee80211_monitor_select_queue() ieee80211_monitor_select_queue() validates the skb length using skb->len before dereferencing pointers into skb->data to access the 802.11 header. However, skb->len includes data in both the linear head buffer and non-linear fragments/pages. When AF_PACKET sends a packet large enough to become non-linear, the 802.11 header at skb->data + len_rthdr may extend past the linear head buffer even though skb->len appears sufficient. This leads to a slab-out-of-bounds read when accessing hdr->frame_control, as the kernel reads beyond the allocated skb head buffer: BUG: KASAN: slab-out-of-bounds in ieee80211_monitor_select_queue+0x1ed/0x220 syzbot has hit the same issues. Fix this by checking skb_headlen(skb) (which gives the length of the linear data region) instead of skb->len before dereferencing skb->data pointers. This ensures the required bytes are actually present in the linear portion of the skb. Apply the same fix to ieee80211_validate_radiotap_len() which has the same class of bug: it uses skb->len to validate accesses to skb->data, and to the corresponding checks in ieee80211_monitor_start_xmit(): for drivers advertising NETIF_F_SG the skb is not linearized before ndo_start_xmit, so the 802.11 header can be read past the linear buffer there as well. | ||||
| CVE-2026-98816 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overflow of jump offset in constant blinding bpf_jit_blind_insn() rewrites 'if rX op imm goto off' into: AX = imm ^ rnd AX ^= rnd if rX op AX goto off and subtracts 2 from off when the jump is backward. off is s16, so -32767 and -32768 wrap and the jump goes 32767 insns forward, past the end of the prog. The jump is inside the patch, hence bpf_adj_branches() doesn't check it. The kernel crashes when such prog runs with bpf_jit_harden=2. Return -ERANGE in such case. bpf_jit_blind_constants() fails the same way when blinding of other insns moves a jump out of range. | ||||
| CVE-2026-98818 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not wake up kswapd in __kfree_rcu_sheaf() Since kfree_rcu() can be called under pi_lock (a raw spinlock in the scheduler), kfree_rcu() itself should never allocate memory with __GFP_KSWAPD_RECLAIM as waking up kswapd ends up acquiring pi_lock, which leads to a deadlock. Reproducing the issue even intentionally was not straightforward. The set_cpus_allowed_force() path that is called under pi_lock is exercised very rarely, and competing tasks that allocate memory will most likely wake kswapd up. Therefore the existence of the deadlock was verified with a modified kernel that has a lockdep map for waking up kswapd: ====================================================== WARNING: possible circular locking dependency detected 7.2.0-rc1-slab-for-next+ #10 Not tainted ------------------------------------------------------ git/6660 is trying to acquire lock: ffff8e524533c550 (&p->pi_lock){-.-.}-{2:2}, at: _raw_spin_lock_irqsave+0x12/0x20 but task is already holding lock: ffff8e57bffff1a0 (&pgdat->kswapd_wait){....}-{3:3}, at: _raw_spin_lock_irqsave+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&pgdat->kswapd_wait){....}-{3:3}: __lock_acquire+0x5a4/0xc50 lock_acquire.part.0+0xb7/0x240 lock_acquire+0x70/0x170 __raw_spin_lock_irqsave+0x44/0x80 _raw_spin_lock_irqsave+0x12/0x20 __wake_up_common_lock+0x31/0xa0 __wake_up+0x20/0x40 kswapd_wakeup_wake+0x7e/0x110 wakeup_kswapd+0x295/0x320 wake_all_kswapds+0xac/0x1a0 __alloc_pages_slowpath.constprop.0+0x282/0xf80 __alloc_frozen_pages_noprof+0x32a/0x360 alloc_slab_page+0x2e/0x160 allocate_slab+0x82/0x420 new_slab+0x52/0xb0 refill_objects+0x13d/0x190 refill_sheaf+0x5d/0xd0 __pcs_replace_empty_main+0x230/0xb10 [...] -> #1 (kswapd_wakeup){-.-.}-{0:0}: __lock_acquire+0x5a4/0xc50 lock_sync.part.0+0x75/0x100 lock_sync+0x36/0x70 might_wakeup_kswapd+0x61/0xa0 __kfree_rcu_sheaf+0x33/0xd90 kvfree_call_rcu+0x1d4/0x3b0 set_cpus_allowed_force+0x163/0x220 cpuset_cpus_allowed_fallback+0x18b/0x240 select_fallback_rq+0x1e6/0x250 [...] -> #0 (&p->pi_lock){-.-.}-{2:2}: check_prev_add+0xe6/0xe00 validate_chain+0x51e/0x6e0 __lock_acquire+0x5a4/0xc50 lock_acquire.part.0+0xb7/0x240 lock_acquire+0x70/0x170 __raw_spin_lock_irqsave+0x44/0x80 _raw_spin_lock_irqsave+0x12/0x20 try_to_wake_up+0x77/0xa90 default_wake_function+0x27/0x60 autoremove_wake_function+0x23/0xb0 __wake_up_common+0xb8/0x170 __wake_up_common_lock+0x51/0xa0 __wake_up+0x20/0x40 kswapd_wakeup_wake+0x7e/0x110 wakeup_kswapd+0x295/0x320 wake_all_kswapds+0xac/0x1a0 __alloc_pages_slowpath.constprop.0+0x282/0xf80 __alloc_frozen_pages_noprof+0x32a/0x360 alloc_slab_page+0x2e/0x160 allocate_slab+0x82/0x420 new_slab+0x52/0xb0 refill_objects+0x13d/0x190 refill_sheaf+0x5d/0xd0 __pcs_replace_empty_main+0x230/0xb10 [...] other info that might help us debug this: Chain exists of: &p->pi_lock --> kswapd_wakeup --> &pgdat->kswapd_wait Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pgdat->kswapd_wait); lock(kswapd_wakeup); lock(&pgdat->kswapd_wait); lock(&p->pi_lock); *** DEADLOCK *** 3 locks held by git/6660: #0: ffff8e519f0e9e20 (&type->i_mutex_dir_key#6){++++}-{4:4}, at: lookup_slow+0x2d/0x60 #1: ffffffff8a31c460 (kswapd_wakeup){-.-.}- ---truncated--- | ||||
| CVE-2026-98824 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate TX status rate metadata minstrel_ht_tx_status() converts the HT/VHT rate reported in a TX status into a group and rate index and uses those to index the minstrel_ht rate tables. The existing validation only checked that an entry was present and had tries recorded; it did not check that the reported MCS, spatial stream count and bandwidth are representable by the tables, so malformed metadata passed to minstrel_ht_get_stats() or minstrel_ht_ri_get_stats() could be used as an out-of-bounds index. Validate the rate metadata in the common TX status path instead of only in minstrel_ht, since the values are used by more than rate control. The legacy ieee80211_tx_rate array and the rate_info based entries are sanitized in ieee80211_tx_status_ext() and ieee80211_tx_rate_update() before any consumer runs: an entry that does not describe a valid rate for its encoding is dropped. minstrel_ht keeps the checks that depend on its own tables, i.e. the supported number of spatial streams, the MCS group size and the supported bandwidths. This does not take away the driver's responsibility to report sane values, it only prevents a single bad report from corrupting mac80211 state. No WARN_ON() is added: with panic_on_warn a driver bug would otherwise turn into a denial of service. | ||||
| CVE-2026-98828 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: reject short WMI command responses ath9k_wmi_rsp_callback() removes the validated WMI header and copies the number of bytes expected by the waiting command into its response buffer. A device response shorter than that expectation can therefore be read beyond the skb payload. Record -EMSGSIZE for a short response, complete the waiter, and return the stored status from the command path. This also prevents callers from consuming stale response bytes as a successful reply. | ||||
| CVE-2026-97772 | 1 Microsoft | 14 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 11 more | 2026-10-18 | 8.8 High |
| Double free in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-97805 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-18 | 9.8 Critical |
| Out-of-bounds read in Windows Partition Management Driver allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-97806 | 1 Microsoft | 17 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 14 more | 2026-10-18 | 7.8 High |
| Use after free in Windows Broadcast DVR User Service allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-33555 | 1 Haproxy | 1 Haproxy | 2026-10-18 | 4 Medium |
| An issue was discovered in HAProxy before 3.3.6. The HTTP/3 parser does not check that the received body length matches a previously announced content-length when the stream is closed via a frame with an empty payload. This can cause desynchronization issues with the backend server and could be used for request smuggling. The earliest affected version is 2.6. | ||||
| CVE-2026-98740 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Drop __init from ECC setup paths for re-probe safety Sashiko reports: "Does suppressing sysfs unbinding fully prevent the execution of freed __init memory? If altr_sysmgr_regmap_lookup_by_phandle() returns -EPROBE_DEFER, the probe is deferred until after __init memory is freed." The a10 EDAC .setup callbacks (sdmmc, ethernet, nand, dma, usb, qspi) and their helpers (altr_init_a10_ecc_device_type, altr_init_a10_ecc_block) were marked __init. These run from the probe path, which may execute after init memory is freed -- e.g. a probe deferred via -EPROBE_DEFER that only succeeds once a late/module dependency appears, or a manual unbind/rebind. Calling __init code then dereferences freed memory. Remove __init so these functions remain valid at runtime. | ||||
| CVE-2026-98832 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: save IRQ state in blkg_tryget_closest() bio_set_dev() associates the bio with a blkg through bio_associate_blkg(). If the blkg lookup misses, blkg_tryget_closest() takes q->queue_lock with spin_lock_irq() and releases it with spin_unlock_irq(), which unconditionally enables local interrupts. Callers may call bio_set_dev() with interrupts already disabled, e.g. dm-thin's pool_map() does so while holding pool->lock taken with spin_lock_irq(). The nested spin_unlock_irq() then enables interrupts while pool->lock is still held, so an I/O completion softirq can run on the same CPU, re-acquire pool->lock (thin_endio(), or overwrite_endio() -> complete_mapping_preparation()) and deadlock. lockdep reports this as inconsistent SOFTIRQ-ON-W to IN-SOFTIRQ-W usage. Commit 3a762de55b4e ("block: save irq state in blkg_lookup_create()") fixed the same problem while the lock lived in blkg_lookup_create(), but commit 9327a865e395 ("blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()") moved the locking into blkg_tryget_closest() and reverted it to spin_lock_irq(). Save and restore the caller's IRQ state instead. | ||||