Export limit exceeded: 105662 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (105662 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97425 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix buffer overflow during vBIOS update Clamp the buffer postion to write by setting the bin attribute to the maximum buffer size so that VFS layer will block the out-of-bounds accessing. | ||||
| CVE-2026-97421 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Be careful about boundary conditions in ib_umem_find_best_pgsz() Several corner cases, especially important on 32 bits: - umem->iova is u64, the function argument should pass in u64 or iova will be truncated - Check that the length is not too large for the iova - Check that lengths > 4G don't overflow the GENMASK | ||||
| CVE-2026-97417 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack() The timestamp-only fast path dereferences the option stream as *(__be32 *)ptr, which assumes 4-byte alignment that the TCP option stream does not guarantee. Use get_unaligned_be32() instead, which reads the value safely and already returns host byte order, so the htonl() on the comparison constant can be dropped. This matches the existing get_unaligned_be32() use later in the same function. | ||||
| CVE-2026-97415 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: tree-checker: validate names in ROOT_REF and ROOT_BACKREF ROOT_REF and ROOT_BACKREF items contain a struct btrfs_root_ref followed by the subvolume name. Several readers assume that this layout is already valid and then use the on-disk name length directly. A corrupted item can therefore make those readers address bytes outside the item, and BTRFS_IOC_GET_SUBVOL_INFO can copy too many bytes into its fixed-size UAPI name buffer. Validate ROOT_REF and ROOT_BACKREF items in tree-checker before any reader uses them. Reject records that do not contain a non-empty name, whose name_len does not exactly describe the remaining item payload, or whose name exceeds BTRFS_NAME_LEN. For BTRFS_IOC_GET_SUBVOL_INFO, copy only the validated on-disk name_len instead of deriving the copy length from the item size. The ioctl result is zeroed when allocated. That leaves the existing trailing zero byte untouched. | ||||
| CVE-2026-97409 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-fc: Do not cancel requests in io target before it is initialized A new nvme-fc controller in CONNECTING state sees admin request timeout schedules ctrl->ioerr_work to abort inflight requests. This ends up calling __nvme_fc_abort_outstanding_ios() which aborts requests in both admin and io tagsets. In case fc_ctrl->tag_set was not initialized we see the warning below. This is because ctrl.queue_count is initialized early in nvme_fc_alloc_ctrl(). nvme nvme0: NVME-FC{0}: starting error recovery Connectivity Loss INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe lpfc 0000:ab:00.0: queue 0 connect admin queue failed (-6). you didn't initialize this object before use? turning off the locking correctness validator. Workqueue: nvme-reset-wq nvme_fc_ctrl_ioerr_work [nvme_fc] Call Trace: <TASK> dump_stack_lvl+0x57/0x80 register_lock_class+0x567/0x580 __lock_acquire+0x330/0xb90 lock_acquire.part.0+0xad/0x210 blk_mq_tagset_busy_iter+0xf9/0xc00 __nvme_fc_abort_outstanding_ios+0x23f/0x320 [nvme_fc] nvme_fc_ctrl_ioerr_work+0x172/0x210 [nvme_fc] process_one_work+0x82c/0x1450 worker_thread+0x5ee/0xfd0 kthread+0x3a0/0x750 ret_from_fork+0x439/0x670 ret_from_fork_asm+0x1a/0x30 </TASK> Update the check in __nvme_fc_abort_outstanding_ios() confirm that io tagset was created before iterating over busy requests. Also make sure to cancel ctrl->ioerr_work before removing io tagset. | ||||
| CVE-2026-93830 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: xgmac2: disable RBUE in default RX interrupt mask Enabling the RX Buffer Unavailable (RBUE) interrupt is counterproductive and can trigger a MAC interrupt storm under heavy RX pressure. When the DMA runs out of RX descriptors it fires RBUE continuously until software refills the ring. However, RBUE is redundant: the normal RX completion interrupt (RIE) already triggers NAPI, which processes completed descriptors and refills the ring, causing the DMA to resume. The RBUE handler itself only sets handle_rx - the same outcome as RIE. On Agilex5 under heavy RX pressure, the MAC interrupt (which includes RBUE) was observed firing 1,821,811,555 times against only 2,618,627 actual RX completions - a ~695x ratio - confirming the severity of the storm. RBUE does not provide OOM recovery. If page_pool is exhausted, stmmac_rx_refill() cannot advance the DMA tail pointer, the DMA stays suspended, and RBUE fires again on the next NAPI completion - a storm with no forward progress. This patch trades that storm for a clean stall with the same RX outcome. Proper OOM recovery is a pre-existing gap outside the scope of this fix. Note: as a consequence of disabling RBUE, the rx_buf_unav_irq ethtool counter will always read 0 on XGMAC2 devices. This behaviour is already inconsistent across DWMAC core versions. Remove RBUE from XGMAC_DMA_INT_DEFAULT_EN and XGMAC_DMA_INT_DEFAULT_RX to prevent the interrupt storm while keeping normal RX handling intact. | ||||
| CVE-2026-93826 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: hidpp: fix potential UAF in hidpp_connect_event() If input_register_device() fails, we call input_free_device(), but keep stale pointer to the old device in hidpp->input, which could potentially lead to UAF. Fix that by resetting it to NULL before returning from hidpp_connect_event(). | ||||
| CVE-2026-93816 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: validate inline dentry name lengths before conversion Inline dentry conversion copies names out of the inline dentry area before checking that each recorded name length fits in the available filename slots. A corrupted image can therefore make the conversion path read past the inline filename storage while building the regular dentry block. Validate each inline dentry name length against the inline filename area before copying it. | ||||
| CVE-2026-93813 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: tree-checker: validate INODE_REF's namelen [BUG] A crafted btrfs image can trigger the following crash: BUG: unable to handle page fault for address: ffffd1dc42884000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page CPU: 9 UID: 0 PID: 1034 Comm: poc Not tainted 7.1.0-rc4-custom+ #383 PREEMPT(full) 46af0a92938a63be7132e0dfd71e62327c51d5c2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:memcpy+0xc/0x10 Call Trace: <TASK> read_extent_buffer+0xe4/0x100 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f] btrfs_get_name+0x15e/0x1e0 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f] reconnect_path+0x165/0x390 exportfs_decode_fh_raw+0x337/0x400 ? drop_caches_sysctl_handler+0xb0/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:memcpy+0xc/0x10 Kernel panic - not syncing: Fatal exception [CAUSE] TThe crafted image has the following corrupted INODE_REF item: item 9 key (258 INODE_REF 257) itemoff 11544 itemsize 4106 index 2 namelen 4096 name: d\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000 The itemsize matches the namelen, but the namelen is 4096, way larger than normal name length limit (BTRFS_NAME_LEN, 255). Meanwhile the memory of the @name is only 255 byte sized, this will cause out-of-boundary access, and cause the above crash. [FIX] Add extra namelen verification for INODE_REF, just like what we have done in ROOT_REF checks. Now the crafted image can be rejected gracefully: BTRFS critical (device dm-2): corrupt leaf: root=5 block=30572544 slot=14 ino=259, invalid inode ref name length, has 4096 expect [1, 255] BTRFS error (device dm-2): read time tree block corruption detected on logical 30572544 mirror 2 [ Rebase, add a Link: tag, add an simple cause analyze ] | ||||
| CVE-2026-93812 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr ndr_encode_v4_ntacl() allocates sd_ndr.data via kzalloc() at entry. If any subsequent ndr_write_*() call returns error during encoding, the allocated sd_ndr.data won't be freed and causes memory leak. Move kfree(sd_ndr.data) into out label to ensure the buffer gets released on all success and error return paths. | ||||
| CVE-2026-93810 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix double fput Fix a double fput() in error handling in cachefiles_create_tmpfile(). | ||||
| CVE-2026-93806 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate assoc response length before status and IE access cfg80211_rx_assoc_resp() initialises the status and response-IE fields of cfg80211_connect_resp_params from the management frame before proving that the frame is long enough for those offsets. S1G and regular association responses also have different IE offsets, but the S1G path only patched resp_ie after the unsafe initialiser had already run. Defer resp_ie, resp_ie_len, and status to after the link-iteration loop. Use a bool to remember whether the frame is S1G, then validate the appropriate minimum length and set all three fields in a single if/else block. Funnel short-frame and SME-reject cleanup through a shared free_bss label for the abandon paths. | ||||
| CVE-2026-93800 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free on reloc root after error in insert_dirty_subvol() If during relocation we fail in insert_dirty_subvol() because btrfs_update_reloc_root() returned an error, we will leave a root's reloc_root field pointing to a reloc root that was freed instead of NULL, resulting later in a use-after-free, or double free attempt during unmount. The sequence of steps is this: 1) During relocation the call to btrfs_update_reloc_root() in insert_dirty_subvol() fails, so insert_dirty_subvol() returns the error to merge_reloc_root() without adding the root to the list rc->dirty_subvol_roots; 2) Then merge_reloc_root() aborts the current transaction because insert_dirty_subvol() returned an error; 3) Up the call chain, merge_reloc_roots() gets the error, adds the reloc root for root X to the local reloc_roots list and jumps to the 'out' label, where it calls free_reloc_roots() to free all the reloc roots in the local reloc_roots list. This frees the reloc root for root X; 4) We go up the call chain to relocate_block_group() which calls clean_dirty_subvols() to go over dirty roots and set their ->reloc_root field to NULL, but root X is not in the dirty_subvol_roots list, so its ->reloc_root still points to a reloc root; 5) Relocation finishes, with an error and a transaction abort, but the ->reloc_root field for root X still points to the reloc root that was freed in step 3; 6) When unmounting the fs we end up calling: btrfs_free_fs_roots() btrfs_drop_and_free_fs_root() --> calls btrfs_put_root() against root X's ->reloc_root which is not NULL and points to the already freed reloc root in step 4 above Resulting in a use-after-free to a double free attempt. Syzbot reported this with the following dmesg/syslog: [ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5) [ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure [ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5 [ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction. [ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0 [ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure [ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly [ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure [ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1 [ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30 [ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30 [ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409 [ 106.682946][ T5338] ================================================================== [ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250 [ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338 [ 106.693173][ T5338] [ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) [ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 106.694300][ T5338] Call Trace: [ 106.694308][ T5338] <TASK> [ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150 [ 106.694331][ T5338] print_address_description+0x55/0x1e0 [ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250 [ 106.694358][ T5338] print_report+0x58/0x70 [ 106. ---truncated--- | ||||
| CVE-2026-93799 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: validate sta_id in BA window status notif BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the firmware notification and uses it to index fw_id_to_mac_id[] without bounds checking. Validate sta_id before array access to prevent out-of-bounds indexing. | ||||
| CVE-2026-93798 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix reloc root cleanup in merge_reloc_roots() If the root we got has zero root refs in its root item, we are resetting the root's ->reloc_root without using barriers like we do everywhere else. Sashiko complained about this while reviewing another patch, and it's correct (see the Link tag below). Also, we should not clear BTRFS_ROOT_DEAD_RELOC_TREE from the root unless the root points to the reloc root we have. Fix this by using clear_reloc_root(), which issues the memory barrier after setting the root's ->reloc_root to NULL and before clearing the bit BTRFS_ROOT_DEAD_RELOC_TREE from the root. | ||||
| CVE-2026-93790 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix out-of-bounds tid_data access in BA notif mvmsta->tid_data was indexed by the TFD loop counter 'i' instead of the actual TID value 'tid'. This writes lq_color into a random tid_data slot unrelated to the BA entry. Since multi-TID blockack is not really in use, 'i' was always 0 and no harm was done. Add a out-of-bound check before accessing the array. | ||||
| CVE-2026-93787 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: bound dirent name against end of SMB response in cifs_filldir cifs_filldir() copies the entry name out of an SMB1 TRANS2_FIND_FIRST / FIND_NEXT response using a length (de.namelen) supplied by the server. The kmalloc'd SMB response buffer is bounded, but nothing checks that de.name + de.namelen still lies inside that buffer before the eventual filldir64() -> verify_dirent_name() -> memchr() reads namelen bytes. A hostile SMB1 server that returns an oversized FileNameLength in a directory entry therefore causes memchr() to read past the end of the response slab buffer. Reachable from any user who can list a directory on a CIFS mount served by an attacker-controlled server (getdents64() on the mounted directory): BUG: KASAN: slab-out-of-bounds in memchr+0x71/0x80 Read of size 1 at addr ffff88800e0640cc by task poc/115 Call Trace: dump_stack_lvl+0x64/0x80 print_report+0xce/0x620 kasan_report+0xec/0x120 memchr+0x71/0x80 filldir64+0x4c/0x6a0 cifs_filldir.constprop.0+0x9bb/0x1e00 cifs_readdir+0x2101/0x3380 iterate_dir+0x19c/0x520 __x64_sys_getdents64+0x126/0x210 do_syscall_64+0x107/0x5a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Pass the end-of-response pointer down to cifs_filldir() and reject entries whose name would extend past that boundary. This bug was discovered by Artiphishell's vTriage pipeline, which generated a userspace reproducer (an emulated hostile SMB1 server plus a getdents64() client) that reliably triggers the KASAN report on an unpatched kernel. The fix below was drafted with the Claude coding assistant; a userspace reproducer is available on request. | ||||
| CVE-2026-93786 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: preserve VFS inherited POSIX ACL mask The VFS initializes a child's POSIX ACL from the parent's default ACL and the requested creation mode. Do not mutate the parent ACL or overwrite the child's VFS-computed access and default ACLs afterwards. This preserves restrictive ACL_MASK entries and prevents SMB object creation from widening effective permissions. | ||||
| CVE-2026-93782 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: flush backend after device ioctls vhost-scsi translates guest response descriptors into userspace iovecs when commands are submitted. Target-core completes those commands asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while an in-flight command still retains response iovecs translated through the old table. If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command completion can write the response to an unrelated userspace object. Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device ioctl. This waits for in-flight commands that can still use the old response iovecs before the ioctl returns. | ||||
| CVE-2026-93287 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: smbus: reject oversized block transfers in the common path The SMBus block transfer length data->block[0] is validated in i2c_smbus_xfer_emulated() but that check runs too late for tracepoints and is skipped entirely when the adapter provides a native smbus_xfer implementation. This allows user-controlled oversized block lengths to reach tracepoint memcpy calls and driver callbacks unchecked. Add an early validation in __i2c_smbus_xfer() that rejects block transfers whose caller-supplied length is zero or exceeds I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driver callback runs. data->block[0] is filled in by the device on SMBus block reads, so the check is scoped to operations where the length is actually supplied by the caller. This is consistent with the existing -EINVAL convention in the emulated path and protects all downstream consumers at once: the smbus_write tracepoint, all native smbus_xfer driver implementations, and the emulated path. Two distinct bugs are fixed by this change: Bug 1: smbus_write tracepoint OOB (include/trace/events/smbus.h) trace_smbus_write() fires before any validation and copies data->block[0]+1 bytes into a 34-byte event buffer. With block[0]=0xfe the tracepoint copies 255 bytes, overflowing by 221. BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_smbus_write+0x27c/0x530 Read of size 255 at addr ffff88800d98fcf8 by task poc_smbus/91 Call Trace: <TASK> __asan_memcpy+0x23/0x80 trace_event_raw_event_smbus_write+0x27c/0x530 __i2c_smbus_xfer+0x43a/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Bug 2: i2c-stub I2C_SMBUS_I2C_BLOCK_DATA OOB (drivers/i2c/i2c-stub.c) stub_xfer() implements .smbus_xfer directly and only clamps block[0] against 256-command, not I2C_SMBUS_BLOCK_MAX. With block[0]=0xff and command=0 the loop accesses block[1+i] for i up to 254, far past the 34-byte union. UBSAN: array-index-out-of-bounds in drivers/i2c/i2c-stub.c:223:44 index 34 is out of range for type '__u8 [34]' Call Trace: <TASK> __ubsan_handle_out_of_bounds+0xd7/0x120 stub_xfer+0x1971/0x198f [i2c_stub] __i2c_smbus_xfer+0x306/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Both traces reproduced on v7.0-rc6+i2c/for-current with KASAN+UBSAN. | ||||