Export limit exceeded: 410510 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25719 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25719 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68359 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-smart2) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop(). | ||||
| CVE-2026-68357 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: pretimeout: Fix UAF in watchdog_unregister_governor() When a watchdog governor is unregistered, it updates existing watchdog devices that were using this governor by falling back to `default_gov`. If the governor being unregistered is currently set as `default_gov`, the `default_gov` is never cleared. This leads to 2 use-after-free issues: 1. New watchdog devices registered after this point will inherit the dangling `default_gov`. 2. Existing watchdog devices using the unregistered governor will have their `wdd->gov` reassigned to the dangling `default_gov`. Fix the UAF by clearing `default_gov` if it matches the governor being unregistered. | ||||
| CVE-2026-68355 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix potential buffer underflow in ath11k_hal_rx_msdu_list_get() When the first entry in msdu_details has a zero buffer address, the code accesses msdu_details[i - 1] with i == 0, causing a buffer underflow. Fix similarly to ath12k_wifi7_hal_rx_msdu_list_get() by adding a separate check for i == 0 before the main condition to prevent the out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-68351 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: bound memcpy length in cmd callback to prevent OOB read When the firmware sends a command response with a length mismatch, carl9170_cmd_callback() logs the mismatch and calls carl9170_restart() but then falls through to memcpy(ar->readbuf, buffer + 4, len - 4). Since len comes from the firmware and can exceed ar->readlen, this copies more data than the readbuf was allocated for. Bound the memcpy to min(len - 4, ar->readlen) so that the response is still completed -- avoiding repeated restarts from queued garbage -- while preventing an overread past the response buffer. | ||||
| CVE-2026-68350 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix OOB read from off-by-two in TX status handler The bounds check in carl9170_tx_process_status() uses `i > ((cmd->hdr.len / 2) + 1)` which is off by two, allowing 2 extra iterations past valid _tx_status entries when the firmware- controlled hdr.ext exceeds hdr.len/2. Fix by using the correct comparison `i >= (cmd->hdr.len / 2)`. | ||||
| CVE-2026-68349 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix buffer overflow in rx_stream failover path The failover continuation in carl9170_rx_stream() copies the full tlen from the second USB transfer instead of capping at rx_failover_missing bytes. When both transfers are near maximum size, the total exceeds the 65535-byte failover SKB, triggering skb_over_panic. Limit the copy size to the missing byte count. [Fix checkpatch CHECK:PARENTHESIS_ALIGNMENT] | ||||
| CVE-2026-68344 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: atm: ueagle-atm: reject descriptors that confuse probe and disconnect uea_probe() distinguishes a pre-firmware device from a post-firmware one using the USB id (UEA_IS_PREFIRM()), and stores a different object as the interface data in each case: a 'struct completion' for a pre-firmware device (to be waited on in .disconnect()), or a 'struct usbatm_data' for a post-firmware one. uea_disconnect() instead tells the two apart by the number of interfaces of the active configuration (a pre-firmware device exposes a single interface, ADI930 has 2 and eagle has 3), and casts the interface data accordingly. Because the two handlers use different criteria, a crafted device that advertises a pre-firmware id together with a multi-interface descriptor (or a post-firmware id with a single interface) makes them disagree: the small 'struct completion' stored by uea_probe() is then passed to usbatm_usb_disconnect(), which casts it to 'struct usbatm_data' and takes instance->serialize, reading past the end of the allocation: BUG: KASAN: slab-out-of-bounds in __mutex_lock+0x152a/0x1b80 Read of size 8 at addr ffff8880470e2c60 by task kworker/1:2/982 ... __mutex_lock+0x152a/0x1b80 usbatm_usb_disconnect+0x70/0x820 uea_disconnect+0x133/0x2c0 usb_unbind_interface+0x1dd/0x9e0 ... which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes to the right of allocated 96-byte region [ffff8880470e2c00, ffff8880470e2c60) Reject such inconsistent descriptors in uea_probe() so that both handlers always make the same pre/post-firmware decision. | ||||
| CVE-2026-68340 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: occ: validate poll response sensor blocks The OCC poll response parser walks a counted list of sensor data blocks. It used the static backing-array capacity as the parse boundary, but a transport response makes only data_length bytes current and valid. A truncated response can therefore make the parser consume a block header or block extent outside the current response. Use data_length as the parent boundary, prove the fixed poll header and each current block header before reading them, and prove the complete block before advancing. Keep parsed sensor metadata local until the complete response has passed validation, then publish it. Propagate malformed-response errors before publishing the OCC as active. | ||||
| CVE-2026-68336 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix devconf_all NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the devconf_all is never initialized because inet6_init() exits before addrconf_init() is called which initializes it. bond_send_validate(), however, will still call bond_ns_send_all() even ipv6 is indeed disabled. It will lead to NULL derefence of net->ipv6.devconf_all in ip6_pol_route(). BUG: kernel NULL pointer dereference, address: 000000000000000c [...] Workqueue: bond0 bond_arp_monitor [bonding] RIP: 0010:ip6_pol_route+0x69/0x480 [...] Call Trace: <TASK> ? srso_return_thunk+0x5/0x5f ? __pfx_ip6_pol_route_output+0x10/0x10 fib6_rule_lookup+0xfe/0x260 ? wakeup_preempt+0x8a/0x90 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? sched_balance_rq+0x369/0x810 ip6_route_output_flags+0xd7/0x170 bond_ns_send_all+0xde/0x280 [bonding] bond_ab_arp_probe+0x296/0x320 [bonding] ? srso_return_thunk+0x5/0x5f bond_activebackup_arp_mon+0xb4/0x2c0 [bonding] process_one_work+0x196/0x370 worker_thread+0x1af/0x320 ? srso_return_thunk+0x5/0x5f ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x199/0x260 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Fix this by adding ipv6_mod_enabled() condition check in the caller. | ||||
| CVE-2026-68333 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The switch port connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only closes the MAC and frees the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference before freeing the dpaa2_mac object. | ||||
| CVE-2026-68331 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The Ethernet connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only disconnects and closes the MAC before freeing the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference after closing the MAC and before freeing the dpaa2_mac object. | ||||
| CVE-2026-68328 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfp: Check resource mutex allocation nfp_cpp_resource_find() allocates a CPP mutex handle for the matching resource-table entry and then reports success. nfp_resource_try_acquire() immediately passes that handle to nfp_cpp_mutex_trylock(). However, nfp_cpp_mutex_alloc() returns NULL on failure. If that happens for a matching table entry, the resource lookup still returns success and the following trylock dereferences a NULL mutex pointer while opening the resource. nfp_resource_acquire() already treats failure to allocate the table mutex as -ENOMEM. Do the same for the resource mutex and fail the lookup before publishing the rest of the resource handle. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68327 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wan: wanxl: Only reset hardware after BAR mapping wanxl_pci_init_one() stores the freshly allocated card in driver data before the PLX BAR is mapped. Several early probe failures then unwind through wanxl_pci_remove_one(), including failure to allocate the coherent status area or to restore the DMA mask. wanxl_pci_remove_one() unconditionally calls wanxl_reset(), and wanxl_reset() dereferences card->plx. On those early failures card->plx is still NULL, so the error path can dereference a NULL MMIO pointer. Only issue the hardware reset once the BAR mapping exists. The remaining cleanup in wanxl_pci_remove_one() already checks whether later resources were allocated. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68325 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Bound the early ACPI HID map The ivrs_acpihid command-line parser appends entries to a fixed four-element early_acpihid_map array. Unlike the sibling IOAPIC and HPET parsers, it does not reject a fifth entry before incrementing the map size. Check the capacity at the common found label before parsing the HID and UID or writing the entry. | ||||
| CVE-2026-68324 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/intel: Fix out-of-bounds memset in dmar_latency_disable() dmar_latency_disable() intends to zero out only the single latency_statistic entry for the given type, but the memset size was computed as sizeof(*lstat) * DMAR_LATENCY_NUM, which clears the entire array starting from &lstat[type]. When type > 0, this writes beyond the end of the allocated array, corrupting adjacent memory. Fix by using sizeof(*lstat) to clear only the target entry. | ||||
| CVE-2026-68322 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rds: Fix inet6_addr_lst NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, inet6_addr_lst is never initialized because inet6_init() exits before addrconf_init() is called to initialize it. An attempt to bind an RDS socket to an ipv6 address results in a crash in __ipv6_chk_addr_and_flags() KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:__ipv6_chk_addr_and_flags+0x1df/0x7e0 Call Trace: <TASK> ipv6_chk_addr+0x3b/0x50 rds_tcp_laddr_check+0x155/0x3b0 [rds_tcp] rds_trans_get_preferred+0x15d/0x2d0 [rds] ? trace_hardirqs_on+0x2d/0x110 rds_bind+0x1433/0x1d60 [rds] ? rds_remove_bound+0xd50/0xd50 [rds] ? aa_af_perm+0x250/0x250 ? __might_fault+0xde/0x190 ? __sys_bind+0x1dc/0x210 __sys_bind+0x1dc/0x210 ? __ia32_sys_socketpair+0x100/0x100 ? restore_fpregs_from_fpstate+0x53/0x100 __x64_sys_bind+0x73/0xb0 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f47f8269ea9 </TASK> The following code reproduces the issue: struct sockaddr_in6 addr; s = socket(PF_RDS, SOCK_SEQPACKET, 0); memset(&addr, 0, sizeof(addr)); inet_pton(AF_INET6, ADDRESS, &addr.sin6_addr); addr.sin6_family = AF_INET6; addr.sin6_port = htons(PORT); bind(s, &addr, sizeof(addr)); Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-68313 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix infinite loop in __tipc_nl_compat_dumpit cmd->dumpit callback can return a negative errno, causing an infinite loop due to the while(len) condition. As the loop never terminates, genl_mutex is never released, and other tasks waiting on it starve in D state. Check dumpit's return value, propagate it and jump to err_out on error. | ||||
| CVE-2026-68310 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: guard HE capability lookups mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after checking HE support, then dereference the HE PHY capability returned by mt76_connac_get_he_phy_cap(). That helper can return NULL when no capability entry matches the vif type. Fetch the capability before appending the TLV and skip the HE-specific setup when no matching capability is available. | ||||
| CVE-2026-68309 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it. | ||||
| CVE-2026-68304 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix 802.1X-SHA256 call trace warning Based on wpa_auth as 1x_256 mode, need to set up "use_fwsup" with BRCMF_PROFILE_FWSUP_1X. Or it will happen trace warning when call brcmf_cfg80211_set_pmk(). [ 4481.831101] ------------[ cut here ]------------ [ 4481.831102] WARNING: CPU: 1 PID: 2997 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7242 brcmf_cfg80211_set_pmk+0x77/0xd0 [brcmfmac] [...] [ 4481.831202] Call Trace: [ 4481.831204] <TASK> [ 4481.831205] nl80211_set_pmk+0x183/0x250 [cfg80211] [ 4481.831233] genl_family_rcv_msg_doit+0xea/0x150 [ 4481.831237] genl_rcv_msg+0x104/0x240 [ 4481.831239] ? cfg80211_probe_status+0x2c0/0x2c0 [cfg80211] [ 4481.831257] ? genl_family_rcv_msg_doit+0x150/0x150 [ 4481.831259] netlink_rcv_skb+0x4e/0x100 [ 4481.831261] genl_rcv+0x24/0x40 [ 4481.831262] netlink_unicast+0x236/0x380 [ 4481.831264] netlink_sendmsg+0x250/0x4b0 [ 4481.831266] sock_sendmsg+0x5c/0x70 [ 4481.831269] ____sys_sendmsg+0x236/0x2b0 [ 4481.831271] ? copy_msghdr_from_user+0x6d/0xa0 [ 4481.831272] ___sys_sendmsg+0x86/0xd0 [ 4481.831274] ? avc_has_perm+0x8c/0x1a0 [ 4481.831276] ? preempt_count_add+0x6a/0xa0 [ 4481.831279] ? sock_has_perm+0x82/0xa0 [ 4481.831280] __sys_sendmsg+0x57/0xa0 [ 4481.831282] do_syscall_64+0x38/0x90 [ 4481.831284] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 4481.831286] RIP: 0033:0x7fd270d369b4 | ||||