Export limit exceeded: 413549 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413549 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413549 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413549 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98635 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: block: Fix zones_cond out-of-bounds write on zone report blk_revalidate_disk_zones() sizes the zones_cond array from the disk capacity and zone size, but the index used by blk_revalidate_zone_cond() comes from the device-driven report_zones() walk and is never checked against the array size. A device reporting more zones than fit the array makes blk_zone_set_cond() write out of bounds. One way to reach this is a zone count exceeding 32 bits: both blk_revalidate_zone_args.nr_zones and struct zoned_disk_info.nr_zones are unsigned int, so a disk advertising more than UINT_MAX zones (e.g. 2^32 + 1024 zones of one 512-byte logical block) gets its zone count truncated to a small value, undersizing the array while the report walk keeps counting upward. Check the index against the array size before storing the zone condition, and refuse to revalidate when the zone count does not fit 32 bits. | ||||
| CVE-2026-98638 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Validate the SVE vector length in pkvm_vcpu_init_sve() pkvm_vcpu_init_sve() clamps only the upper bound of the host-provided sve_max_vl, so an invalid vector length reaches sve_state_size_from_vl() and the WARN_ON() there, which is fatal at EL2. The existing !sve_state_size test rejects such a length, but only after the macro has run. Check sve_vl_valid() before deriving the state size. A valid length cannot yield a zero size, so the !sve_state_size test goes with it. | ||||
| CVE-2026-98644 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch() __htab_map_lookup_and_delete_batch() has no rescheduling point. The batch count bounds how many entries are copied out, not how many buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the map end to end. The empty-bucket fast path is worse: it stays inside a single rcu_read_lock() / bpf_disable_instrumentation() section for any run of consecutive empty buckets. That holds up on small maps, but it falls apart at scale. On a 144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic BPF_MAP_LOOKUP_BATCH calls against an LRU hash map with 16,777,216 buckets held a CPU inside the batch op for 77+ seconds and triggered the soft lockup watchdog. Commit 75134f16e7dd ("bpf: Add schedule points in batch ops") fixed this same problem in the generic batch ops, but not in this htab-native path, which every htab-based hash map variant uses for its lookup[_and_delete] batch ops. Complete that fix here. Leave the critical section after 64 consecutive empty buckets, call cond_resched_tasks_rcu_qs(), and resume at the saved bucket cursor. No locks are held at that point, and resuming from the cursor is already the function's behavior for non-empty buckets. Add the same call to the per-bucket loop after copy_to_user(), where every lock has been dropped. cond_resched_rcu() is not enough here: sleeping with bpf_prog_active elevated makes tracing programs on that CPU silently skip their invocations. Plain cond_resched() is not enough either. It is a no-op under PREEMPT and PREEMPT_LAZY, the only models arm64 and x86 have offered since commit 7dadeaa6e851 ("sched: Further restrict the preemption modes"). It is also never a Tasks RCU quiescent state, in any model: the reschedule counts as a preemption. The walking task stays a holdout and stalls every synchronize_rcu_tasks() caller, ftrace and BPF trampoline teardown included, until the syscall returns [1]. cond_resched_tasks_rcu_qs() is the usual tool for that [2]. It reports the quiescent state at each yield and still reschedules as cond_resched() does on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels. | ||||
| CVE-2026-98666 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16136: fix unprotected debugfs reads The serial_number file operations are open coded and never call debugfs_file_get(), which debugfs_create_file_unsafe() requires. debugfs_remove_recursive() therefore does not wait for a read in progress, and unbind frees the iio_dev underneath it. Use debugfs_create_file() instead. | ||||
| CVE-2026-98667 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: frequency: adf4377: Fully initialize clk_init_data and clk_parent_data The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. adf4377_clk_register() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter is uninitialized, and thus may cause a crash. Similarly, adf4377_clk_register() fills in only parent_data.fw_name, leaving other members of the clk_parent_data structure uninitialized. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||
| CVE-2026-91156 | 1 Discourse | 1 Discourse | 2026-10-22 | 7.5 High |
| Discourse is an open-source discussion platform. Prior to 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9, MessageBus audience calculation could deliver messages from a read-restricted category chat channel to an authenticated user who could view the category but was not allowed to use Chat under the site's group restrictions. The publication path bounded events by category visibility without also enforcing Chat eligibility, exposing live and recent message content available in the MessageBus backlog. The issue does not permit retrieval of the channel's full history through the Chat API and does not permit message creation or modification. This issue is fixed in versions 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9. | ||||
| CVE-2026-100394 | 1 Nezhahq | 1 Nezha | 2026-10-22 | 6.5 Medium |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From 2.2.7 until 2.2.11, ServiceSentinel.worker in service/singleton/servicesentinel.go checked an owned service under servicesLock and later dereferenced pointer-valued serviceStatusToday and serviceCurrentStatusData entries under serviceResponseDataStoreLock without revalidating that ServiceSentinel.Delete had not removed them. A RoleMember could concurrently report TCP or ICMP results through the member's own agent and delete the same owned service, causing a nil pointer dereference. Because the gRPC server had no recovery interceptor, the worker panic terminated the whole dashboard process and disrupted every tenant's web interface, REST API, and agent connections. The issue affects availability only and does not disclose or modify data. This issue is fixed in versions 2.2.11 and 2.3.0. | ||||
| CVE-2026-102893 | 1 Zulip | 1 Zulip | 2026-10-22 | N/A |
| Zulip is an open-source team collaboration tool. In Zulip Server versions through 12.1, GenericOpenIdConnectBackend matches the identity provider email claim to an active account's delivery_email without rejecting an explicitly false email_verified claim. If a configured identity provider returns an email address that the authenticating user does not control together with email_verified=false, Zulip can log the user into the existing account for that address. Exploitation requires a misconfigured trusted identity provider, and deployments whose authoritative identity provider only emits email addresses controlled by the authenticating user are not affected. This issue is fixed in version 12.2. | ||||
| CVE-2026-100404 | 1 Zulip | 1 Zulip | 2026-10-22 | 6.5 Medium |
| Zulip is an open-source team collaboration tool. In Zulip Server versions through 12.1, guest users can receive new message events for public channels outside their subscriptions. A guest can trigger the issue by registering an event queue with parameters that request messages from an unsubscribed public channel, or an existing event queue can remain affected after the guest's access to the channel is removed. The flaw discloses new public-channel messages to the guest. This issue is fixed in version 12.2. | ||||
| CVE-2026-109438 | 1 3proxy | 1 3proxy | 2026-10-22 | 5.3 Medium |
| 3proxy from 0.9.7 through 1.0.1, fixed in commit 206c923, contains an uninitialized stack memory disclosure vulnerability that allows unauthenticated attackers to leak stack bytes via the SOCKS4 reply path when the external-NAT option (-Ne) is configured. Attackers can send a client probe that fails the SOCKS version check to trigger a reply containing uninitialized bytes from the sin structure, exposing high bytes of a userspace pointer that weakens ASLR protections. | ||||
| CVE-2026-101966 | 1 Juniper Networks | 1 Junos Os Evolved | 2026-10-22 | 8.2 High |
| A Use of Externally-Controlled Format String vulnerability in the jti-dialoutd of Juniper Networks Junos OS Evolved allows an authenticated network attacker to cause persistent telemetry dial-out denial of service via a crafted analytics sensor resource submitted through gNMI listener. | ||||
| CVE-2026-101967 | 1 Juniper Networks | 1 Junos Os Evolved | 2026-10-22 | 8.8 High |
| An OS Command Injection vulnerability in the bootzd zero-touch provisioning daemon of Juniper Networks Junos OS Evolved allows an unauthenticated attacker on the management LAN to execute commands as root via crafted DHCP response. | ||||
| CVE-2026-103994 | 1 Juniper Networks | 1 Junos Os | 2026-10-22 | 8.8 High |
| A Heap-based Buffer Overflow vulnerability in the VXLAN Gateway Daemon (vgd) of Juniper Networks Junos OS allows a malicious or compromised SDN-controller to cause a complete outage of the OVSDB control plane and possibly remote code execution. | ||||
| CVE-2026-103946 | 1 Tenable | 1 Nessus | 2026-10-22 | 8.3 High |
| An SQL injection vulnerability could allow an authenticated user to read or modify data stored by Nessus. | ||||
| CVE-2026-103993 | 1 Juniper Networks | 2 Junos Os, Junos Os Evolved | 2026-10-22 | 6.8 Medium |
| An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent attacker which sends a specific set of BGP communities to cause a Denial-of-Service (DoS) as rpd crashes when graceful-shutdown sender community is added when attempting to advertise. | ||||
| CVE-2026-92151 | 1 Nasa | 1 Fprime | 2026-10-22 | 7.5 High |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::Ccsds::SpacePacketDeframer dataIn_handler is vulnerable because the handler treats the minimum packet-length condition as FW_ASSERT rather than rejecting and returning the buffer. When a CCSDS telecommand frame leaves a payload of six bytes or fewer after TcDeframer removes its header and trailer, the assertion aborts or resets the flight-software process, causing denial of service. This issue is fixed in version 4.2.0. | ||||
| CVE-2026-92153 | 1 Nasa | 1 Fprime | 2026-10-22 | 7.1 High |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::FileUplink handling of Fw::FilePacket::StartPacket destination paths FileUplink copies the packet-controlled destinationPath and opens it for writing without canonicalization or confinement to an upload directory. When a peer able to send file-uplink packets supplies an absolute, traversing, or otherwise attacker-selected writable destination path, files can be created or overwritten at attacker-selected writable filesystem locations, affecting integrity and potentially availability. This issue is fixed in version 4.3.0. | ||||
| CVE-2026-101997 | 1 Juniper Networks | 1 Junos Os | 2026-10-22 | 8.1 High |
| An Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in ipfd of Juniper Networks Junos OS on SRX Series allows an unauthenticated network-based attacker to execute code with root privileges via a configured Security Intelligence feed connection. | ||||
| CVE-2026-101996 | 1 Juniper Networks | 2 Junos Os, Junos Os Evolved | 2026-10-22 | 6.5 Medium |
| A Reachable Assertion vulnerability in the l2ald daemon of Juniper Networks Junos OS and Junos OS Evolved devices configured for MC-LAG/ICCP allows an adjacent attacker to cause a denial of service via an inconsistent ICCP peer message. | ||||
| CVE-2026-100236 | 2 Dpdk, Redhat | 4 Dpdk, Enterprise Linux, Openshift and 1 more | 2026-10-22 | 8.6 High |
| A flaw was found in the DPDK GSO library. When software GSO copies packet headers into a new mbuf, it does not check that the header fits in the source first segment or in the destination buffer, and a header longer than the configured GSO segment size can underflow the payload-size calculation. A remote or guest-supplied packet processed with software GSO can trigger an out-of-bounds read or write. | ||||